Table of Contents
is_ip (ip)
is_pure_ip (ip)
is_ipv4 (ip)
is_ipv6 (ip)
is_ipv6_reference (ip)
ip_type (ip)
compare_ips (ip1, ip2)
compare_pure_ips (ip1, ip2)
is_ip_rfc1918 (ip)
is_in_subnet (ip, subnet)
dns_sys_match_ip(hostname, ipaddr)
dns_int_match_ip(hostname, ipaddr)
dns_query(hostname, pvid)
List of Examples
is_ip
usage
is_pure_ip
usage
is_ipv4
usage
is_ipv6
usage
is_ipv6_reference
usage
ip_type
usage
compare_ips
usage
compare_pure_ips
usage
is_ip_rfc1918
usage
is_in_subnet
usage
dns_sys_match_ip
usage
dns_int_match_ip
usage
dns_query
usage
Table of Contents
is_ip (ip)
is_pure_ip (ip)
is_ipv4 (ip)
is_ipv6 (ip)
is_ipv6_reference (ip)
ip_type (ip)
compare_ips (ip1, ip2)
compare_pure_ips (ip1, ip2)
is_ip_rfc1918 (ip)
is_in_subnet (ip, subnet)
dns_sys_match_ip(hostname, ipaddr)
dns_int_match_ip(hostname, ipaddr)
dns_query(hostname, pvid)
The IPops module offers operations for handling IP addresses, both IPv4 and IPv6.
IPv6 is defined in RFC 2460. The same IPv6 address can be represented by different ASCII strings, so binary comparison is required. For example, the following IPv6 addresses are equivalent:
2001:DB8:0000:0000:0008:0800:200C:417A
2001:DB8:0:0:8:800:200C:417A
2001:DB8::200C:417A
When using IPv6 in an URI (i.e. a SIP URI) the IP address must be written in "IPv6 reference" format (which is the textual representation of the IPv6 enclosed between [ ] symbols). An example is “sip:alice@[2001:DB8:0:0:8:800:200C:417A]”. This allows separation of address and port number with a :, like “[2001:DB8:0:0:8:800:200C:417A]:5060”. This module also allows comparing an IPv6 address with its IPv6 reference representation.
The following modules must be loaded before this module:
No dependencies on other SIP Router modules
Returns TRUE if the argument is a valid IPv4, IPv6 or IPv6 reference. FALSE otherwise.
Parameters:
ip - String or pseudo-variable containing the IP address to evaluate.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, ONREPLY_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.1.
is_ip
usage
... if (is_ip($rd)) { xlog("L_INFO", "RURI domain is an IP address (not a host name/domain)\n"); } ...
Returns TRUE if the argument is a valid IPv4 or IPv6. FALSE otherwise.
Parameters:
ip - String or pseudo-variable containing the IP to evaluate.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, ONREPLY_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.2.
is_pure_ip
usage
... $var(ip) = "::1"; if (is_pure_ip($var(ip))) { xlog("L_INFO", "it's IPv4 or IPv6\n"); } ...
Returns TRUE if the argument is a valid IPv4. FALSE otherwise.
Parameters:
ip - String or pseudo-variable containing the IP to evaluate.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, ONREPLY_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Returns TRUE if the argument is a valid IPv6. FALSE otherwise.
Parameters:
ip - String or pseudo-variable containing the IP to evaluate.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, ONREPLY_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.4.
is_ipv6
usage
... if (is_ipv6("1080:0:0:0:8:800:200C:417A")) { xlog("L_INFO", "it's IPv6\n"); } ...
Returns TRUE if the argument is a valid IPv6 reference. FALSE otherwise.
Parameters:
ip - String or pseudo-variable containing the IP to evaluate.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, ONREPLY_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.5.
is_ipv6_reference
usage
... if (is_ipv6_reference("[1080:0:0:0:8:800:200C:417A]")) { xlog("L_INFO", "it's IPv6 reference\n"); } ...
Returns the type of the given IP.
Parameters:
ip - String or pseudo-variable containing the IP to evaluate.
Return value:
1 - IPv4
2 - IPv6
3 - IPv6 reference
-1 - invalid IP
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, ONREPLY_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.6.
ip_type
usage
... ip_type($var(myip)); switch($rc) { case 1: xlog("L_INFO", "it's IPv4\n"); break; case 2: xlog("L_INFO", "it's IPv6\n"); break; case 3: xlog("L_INFO", "it's IPv6 reference\n"); break; case -1: xlog("L_INFO", it's type invalid\n"); break; } ...
Returns TRUE if both IP addresses are the same. FALSE otherwise. This function also allows comparing an IPv6 address against an IPv6 reference.
Parameters:
ip1 - String or pseudo-variable containing the first IP to compare.
ip2 - String or pseudo-variable containing the second IP to compare.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, ONREPLY_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.7.
compare_ips
usage
... if (compare_ips("1080:0000:0000:0000:0008:0800:200C:417A", "[1080::8:800:200C:417A]")) { xlog("L_INFO", "both are the same IP\n"); } ...
Returns TRUE if both IP's are the same. FALSE otherwise. This function does NOT allow comparing an IPv6 against an IPv6 reference.
Parameters:
ip1 - String or pseudo-variable containing the first IP address to compare.
ip2 - String or pseudo-variable containing the second IP address to compare.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, ONREPLY_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.8.
compare_pure_ips
usage
... if (compare_pure_ips($si, "1080::8:800:200C:417A")) { xlog("L_INFO", "both are the same IP\n"); } ...
Returns TRUE if the argument is a private IPv4 according to RFC 1918. FALSE otherwise.
Parameters:
ip - String or pseudo-variable containing the IP to evaluate.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, ONREPLY_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.9.
is_ip_rfc1918
usage
... if (is_ip_rfc1918("10.0.123.123")) { xlog("L_INFO", "it's a private IPv4\n"); } ...
Returns TRUE if the first argument is an IP address within the (CIDR notation) subnet in the second argument. FALSE otherwise.
Parameters:
ip - string or pseudo-variable containing the ip to evaluate.
subnet - string or pseudo-variable containing the (CIDR notation) subnet to evaluate.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, ONREPLY_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.10.
is_in_subnet
usage
... if (is_in_subnet("10.0.123.123", "10.0.123.1/24")) { xlog("L_INFO", "it's in the subnet\n"); } ...
Returns TRUE if ipaddr is associated by DNS to hostname. FALSE otherwise. It does not use the internal DNS resolver, but directly getaddrinfo(...). All addresses returned for the hostname are checked. Note that some hosts may return different lists of IP addresses for each query, if the DNS server is configured in that way (e.g., for providing load balancing through DNS).
Parameters:
hostname - string or pseudo-variable containing the hostname. The resulting IP addresses from DNS query are compared with ipaddr.
ipaddr - string or pseudo-variable containing the ip address.
This function can be used from ANY_ROUTE.
Example 1.11.
dns_sys_match_ip
usage
... if (!dns_sys_match_ip("myhost.com", "1.2.3.4")) { xdbg("ip address not associated with hostname\n"); } ...
Returns TRUE if ipaddr is associated by DNS to hostname. FALSE otherwise. It uses internal DNS resolver. At this moment, the function might not check all the IP addresses as returned by dns_sys_match_ip(), because the internal resolver targets to discover the first address to be used for relaying SIP traffic. Thus is better to use dns_sys_match_ip() if the host you want to check has many IP addresses, in different address famililies (IPv4/6).
Parameters:
hostname - string or pseudo-variable containing the hostname. The resulting IP addresses from DNS query are compared with ipaddr.
ipaddr - string or pseudo-variable containing the ip address.
This function can be used from ANY_ROUTE.
Example 1.12.
dns_int_match_ip
usage
... if (!dns_int_match_ip("myhost.com", "1.2.3.4")) { xdbg("ip address not associated with hostname\n"); } ...
Store the IP addresses and their type that correspond to hostname in a config variable $dns(pvid=>key).
Parameters:
hostname - string or pseudo-variable containing the hostname. The resulting IP addresses from DNS query are compared with ipaddr.
pvid - container id for script variable.
This function can be used from ANY_ROUTE.
Example 1.13.
dns_query
usage
... if(dns_query("test.com", "xyz")) { xlog(" number of addresses: $dns(xyz=>count)\n"); xlog(" ipv4 address found: $dns(xyz=>ipv4)\n"); xlog(" ipv6 address found: $dns(xyz=>ipv6)\n"); $var(i) = 0; while($var(i)<$dns(xyz=>count)) { xlog(" #[$var(i)] type ($dns(xyz=>type[$var(i)]))" " addr [$dns(xyz=>addr[$var(i)])]\n"); $var(i) = $var(i) + 1; } } ...