1.2.1. OpenSER Modules

The following modules must be loaded before this module:

• No dependencies on other OpenSER modules.

1.2.2. External Libraries or Applications

The following libraries or applications must be installed before running OpenSER with this module loaded:

• None.

1.3.1. enable (int)

Even when the module is loaded, benchmarking is not enabled per default. This variable may have three different values:

• -1 - Globally disable benchmarking

• 0 - Enable per-timer enabling. Single timers are inactive by default and can be activated through the MI interface as soon as that feature is implemented.

• 1 - Globally enable benchmarking

Default value is "0".

...
modparam("benchmark", "enable", 1)
...

1.3.2. granularity (int)

Logging normally is not done for every reference to the log_timer() function, but only every n'th call. n is defined through this variable. A sensible granularity seems to be 100.

Default value is "1".

...
modparam("benchmark", "granularity", 500)
...

1.3.3. loglevel (int)

Set the log level for the benchmark logs. These levels should be used:

• -3 - L_ALERT

• -2 - L_CRIT

• -1 - L_ERR

• 1 - L_WARN

• 2 - L_NOTICE

• 3 - L_INFO

• 4 - L_DBG

Default value is "3" (L_INFO).

...
modparam("benchmark", "loglevel", 4)
...

This will set the logging level to L_DBG.

1.4.1. bm_start_timer(name)

Start timer "name". A later call to "bm_log_timer()" logs this timer..

...
bm_start_timer("test");
...

1.4.2. bm_log_timer(name)

This function logs the timer with the given ID. The following data are logged:

• Last msgs is the number of calls in the last logging interval. This equals the granularity variable.

• Last sum is the accumulated duration in the current logging interval (i.e. for the last "granularity" calls).

• Last min is the minimum duration between start/log_timer calls during the last interval.

• Last max - maximum duration.

• Last average is the average duration between bm_start_timer() and bm_log_timer() since the last logging.

• Global msgs number of calls to log_timer.

• Global sum total duration in microseconds.

• Global min... You get the point. :)

• Global max also obvious.

• Global avg possibly the most interesting value.

...
bm_log_timer("test");
...

1.5.1. bm_enable_global

Enables/disables the module. Parameter may be -1, 0 or 1. See discription of "enable" parameter.

1.5.2. bm_enable_timer

Enable or disable a single timer. The following example enables timer "test" (the second parameter must be 0 to disable):

...
openserctl fifo bm_enable_timer test 1
...

1.5.3. bm_granularity

Modifies the benchmarking granularity. See "granularity" variable.

1.5.4. bm_loglevel

Modifies the module log level. See "loglevel" variable.

2.1.1. bm_register(name, mode, id)

This function register a new timer and/or returns the internal ID associated with the timer. mode controls the creation of new timer if not found. id is to be used by start and log timer functions.

2.1.2. bm_start(id)

This function equals the user-exported function bm_start_timer. The id is passed as an integer, though.

2.1.3. bm_log(id)

This function equals the user-exported function bm_log_timer. The id is passed as an integer, though.

2.1.4. Benchmark API Example

...
#include "../benchmark/benchmark.h"
...
struct bm_binds bmb;
...
...
/* load the benchmarking API */
if (load_bm_api( &bmb )!=0) {
    LM_ERR("can't load benchmark API\n");
    goto error;
}
...
...
/* Start/log timers during a (usually user-exported) module function */
bmp.bm_register("test", 1, &id)
bmb.bm_start(id);
do_something();
bmb.bm_log(id);
...