dialog Module

Bogdan-Andrei Iancu

Voice Sistem SRL

Carsten Bock

ng-voice.com

Edited by

Bogdan-Andrei Iancu

Edited by

Carsten Bock


Table of Contents

1. Admin Guide
1. Overview
2. How it works
3. Dialog profiling
4. Dependencies
4.1. Kamailio Modules
4.2. External Libraries or Applications
5. Parameters
5.1. enable_stats (integer)
5.2. hash_size (integer)
5.3. rr_param (string)
5.4. dlg_flag (integer)
5.5. timeout_avp (string)
5.6. default_timeout (integer)
5.7. dlg_extra_hdrs (string)
5.8. dlg_match_mode (integer)
5.9. detect_spirals (integer)
5.10. db_url (string)
5.11. db_mode (integer)
5.12. db_update_period (integer)
5.13. db_fetch_rows (integer)
5.14. table_name (string)
5.15. callid_column (string)
5.16. from_uri_column (string)
5.17. from_tag_column (string)
5.18. to_uri_column (string)
5.19. to_tag_column (string)
5.20. caller_cseq_column (string)
5.21. callee_cseq_column (string)
5.22. caller_route_column (string)
5.23. callee_route_column (string)
5.24. caller_contact_column (string)
5.25. callee_contact_column (string)
5.26. caller_sock_column (string)
5.27. callee_sock_column (string)
5.28. h_id_column (string)
5.29. h_entry_column (string)
5.30. state_column (string)
5.31. start_time_column (string)
5.32. timeout_column (string)
5.33. sflags_column (string)
5.34. toroute_column (string)
5.35. vars_table_name (string)
5.36. vars_h_id_column (string)
5.37. vars_h_entry_column (string)
5.38. vars_key_column (string)
5.39. vars_value_column (string)
5.40. profiles_with_value (string)
5.41. profiles_no_value (string)
5.42. bridge_controller (string)
5.43. initial_cbs_inscript (string)
6. Functions
6.1. set_dlg_profile(profile,[value])
6.2. unset_dlg_profile(profile,[value])
6.3. is_in_profile(profile,[value])
6.4. get_profile_size(profile,[value],size)
6.5. dlg_isflagset(flag)
6.6. dlg_setflag(flag)
6.7. dlg_resetflag(flag)
6.8. dlg_bye(side)
6.9. dlg_refer(side, address)
6.10. dlg_manage()
6.11. dlg_bridge(from, to, op)
6.12. dlg_get(callid, ftag, ttag)
6.13. is_known_dlg()
7. Exported statistics
7.1. active_dialogs
7.2. early_dialogs
7.3. processed_dialogs
7.4. expired_dialogs
7.5. failed_dialogs
8. MI Commands
8.1. dlg_list
8.2. dlg_list_ctx
8.3. dlg_end_dlg
8.4. dlg_terminate_dlg
8.5. profile_get_size
8.6. profile_list_dlgs
8.7. dlg_bridge
9. Exported RPC Functions
9.1. dlg.list
9.2. dlg.list_ctx
9.3. dlg.dlg_list
9.4. dlg.dlg_list_ctx
9.5. dlg.end_dlg
9.6. dlg.profile_get_size
9.7. dlg.profile_list
9.8. dlg.bridge_dlg
10. Exported pseudo-variables
10.1. $DLG_count
10.2. $DLG_status
10.3. $DLG_lifetime
10.4. $dlg(...)
10.5. $dlg_ctx(...)
10.6. $dlg_var(key)
2. Developer Guide
1. Available Functions
1.1. register_dlgcb (dialog, type, cb, param, free_param_cb)
1.2. terminate_dlg (dlg, hdrs)
3. Frequently Asked Questions

List of Examples

1.1. Set enable_stats parameter
1.2. Set hash_size parameter
1.3. Set rr_param parameter
1.4. Set dlg_flag parameter
1.5. Set timeout_avp parameter
1.6. Set default_timeout parameter
1.7. Set dlf_extra_hdrs parameter
1.8. Set dlg_match_mode parameter
1.9. Set detect_spirals parameter
1.10. Set db_url parameter
1.11. Set db_mode parameter
1.12. Set db_update_period parameter
1.13. Set db_fetch_rows parameter
1.14. Set table_name parameter
1.15. Set callid_column parameter
1.16. Set from_uri_column parameter
1.17. Set from_tag_column parameter
1.18. Set to_uri_column parameter
1.19. Set to_tag_column parameter
1.20. Set caller_cseq_column parameter
1.21. Set callee_cseq_column parameter
1.22. Set caller_route_column parameter
1.23. Set to_route_column parameter
1.24. Set caller_contact_column parameter
1.25. Set callee_contact_column parameter
1.26. Set caller_sock_column parameter
1.27. Set callee_sock_column parameter
1.28. Set h_id_column parameter
1.29. Set h_entry_column parameter
1.30. Set state_column parameter
1.31. Set start_time_column parameter
1.32. Set timeout_column parameter
1.33. Set sflags_column parameter
1.34. Set toroute_column parameter
1.35. Set vars_table_name parameter
1.36. Set vars_h_id_column parameter
1.37. Set vars_h_entry_column parameter
1.38. Set vars_key_column parameter
1.39. Set vars_value_column parameter
1.40. Set profiles_with_value parameter
1.41. Set profiles_no_value parameter
1.42. Set bridge_controller parameter
1.43. Set initial_cbs_inscript parameter
1.44. set_dlg_profile usage
1.45. unset_dlg_profile usage
1.46. is_in_profile usage
1.47. get_profile_size usage
1.48. dlg_isflagset usage
1.49. dlg_setflag usage
1.50. dlg_resetflag usage
1.51. dlg_bye usage
1.52. dlg_refer usage
1.53. dlg_manage usage
1.54. dlg_bridge usage
1.55. dlg_get usage
1.56. is_known_dlg() usage

Chapter 1. Admin Guide

Table of Contents

1. Overview
2. How it works
3. Dialog profiling
4. Dependencies
4.1. Kamailio Modules
4.2. External Libraries or Applications
5. Parameters
5.1. enable_stats (integer)
5.2. hash_size (integer)
5.3. rr_param (string)
5.4. dlg_flag (integer)
5.5. timeout_avp (string)
5.6. default_timeout (integer)
5.7. dlg_extra_hdrs (string)
5.8. dlg_match_mode (integer)
5.9. detect_spirals (integer)
5.10. db_url (string)
5.11. db_mode (integer)
5.12. db_update_period (integer)
5.13. db_fetch_rows (integer)
5.14. table_name (string)
5.15. callid_column (string)
5.16. from_uri_column (string)
5.17. from_tag_column (string)
5.18. to_uri_column (string)
5.19. to_tag_column (string)
5.20. caller_cseq_column (string)
5.21. callee_cseq_column (string)
5.22. caller_route_column (string)
5.23. callee_route_column (string)
5.24. caller_contact_column (string)
5.25. callee_contact_column (string)
5.26. caller_sock_column (string)
5.27. callee_sock_column (string)
5.28. h_id_column (string)
5.29. h_entry_column (string)
5.30. state_column (string)
5.31. start_time_column (string)
5.32. timeout_column (string)
5.33. sflags_column (string)
5.34. toroute_column (string)
5.35. vars_table_name (string)
5.36. vars_h_id_column (string)
5.37. vars_h_entry_column (string)
5.38. vars_key_column (string)
5.39. vars_value_column (string)
5.40. profiles_with_value (string)
5.41. profiles_no_value (string)
5.42. bridge_controller (string)
5.43. initial_cbs_inscript (string)
6. Functions
6.1. set_dlg_profile(profile,[value])
6.2. unset_dlg_profile(profile,[value])
6.3. is_in_profile(profile,[value])
6.4. get_profile_size(profile,[value],size)
6.5. dlg_isflagset(flag)
6.6. dlg_setflag(flag)
6.7. dlg_resetflag(flag)
6.8. dlg_bye(side)
6.9. dlg_refer(side, address)
6.10. dlg_manage()
6.11. dlg_bridge(from, to, op)
6.12. dlg_get(callid, ftag, ttag)
6.13. is_known_dlg()
7. Exported statistics
7.1. active_dialogs
7.2. early_dialogs
7.3. processed_dialogs
7.4. expired_dialogs
7.5. failed_dialogs
8. MI Commands
8.1. dlg_list
8.2. dlg_list_ctx
8.3. dlg_end_dlg
8.4. dlg_terminate_dlg
8.5. profile_get_size
8.6. profile_list_dlgs
8.7. dlg_bridge
9. Exported RPC Functions
9.1. dlg.list
9.2. dlg.list_ctx
9.3. dlg.dlg_list
9.4. dlg.dlg_list_ctx
9.5. dlg.end_dlg
9.6. dlg.profile_get_size
9.7. dlg.profile_list
9.8. dlg.bridge_dlg
10. Exported pseudo-variables
10.1. $DLG_count
10.2. $DLG_status
10.3. $DLG_lifetime
10.4. $dlg(...)
10.5. $dlg_ctx(...)
10.6. $dlg_var(key)

1. Overview

The dialog module provides dialog awareness to the Kamailio proxy. Its functionality is to keep track of the current dialogs, to offer information about them (like how many dialogs are active) or to manage them. The module exports several functions that could be used directly from scripts.

The module, via an internal API, also provide the foundation to build on top of it more complex dialog-based functionalities via other Kamailio modules.

2. How it works

To create the dialog associated to an initial request, the flag dlg_flag (Section 5.4, “dlg_flag (integer)”) must be set before creating the corresponding transaction.

The dialog is automatically destroyed when a BYE is received. In case of no BYE, the dialog lifetime is controlled via the default timeout (see default_timeout - Section 5.6, “default_timeout (integer)”) and custom timeout (see timeout_avp - Section 5.5, “timeout_avp (string)”). The dialog timeout is reset each time a sequential request passes.

3. Dialog profiling

Dialog profiling is a mechanism that helps in classifying, sorting and keeping trace of certain types of dialogs, using whatever properties of the dialog (like caller, destination, type of calls, etc). Dialogs can be dynamically added in different (and several) profile tables - logically, each profile table can have a special meaning (like dialogs outside the domain, dialogs terminated to PSTN, etc).

There are two types of profiles:

  • with no value - a dialog simply belongs to a profile. (like outbound calls profile). There is no other additional information to describe the dialog's belonging to the profile;

  • with value - a dialog belongs to a profile having a certain value (like in caller profile, where the value is the caller ID). The belonging of the dialog to the profile is strictly related to the value.

A dialog can be added to multiple profiles in the same time.

Profiles are visible (at the moment) in the request route (for initial and sequential requests) and in the branch, failure and reply routes of the original request.

4. Dependencies

4.1. Kamailio Modules

The following modules must be loaded before this module:

  • TM - Transaction module

  • RR - Record-Route module

4.2. External Libraries or Applications

The following libraries or applications must be installed before running Kamailio with this module loaded:

  • None.

5. Parameters

5.1. enable_stats (integer)

If the statistics support should be enabled or not. Via statistic variables, the module provide information about the dialog processing. Set it to zero to disable or to non-zero to enable it.

Default value is 1 (enabled).

Example 1.1. Set enable_stats parameter

...
modparam("dialog", "enable_stats", 0)
...

5.2. hash_size (integer)

The size of the hash table internally used to keep the dialogs. A larger table is much faster but consumes more memory. The hash size must be a power of two number.

IMPORTANT: If dialogs' information should be stored in a database, a constant hash_size should be used, otherwise the restoring process will not take place. If you really want to modify the hash_size you must delete all table's rows before restarting the server.

Default value is 4096.

Example 1.2. Set hash_size parameter

...
modparam("dialog", "hash_size", 1024)
...

5.3. rr_param (string)

Name of the Record-Route parameter to be added with the dialog cookie. It is used for the fast dialog matching of sequential requests.

Default value is did.

Example 1.3. Set rr_param parameter

...
modparam("dialog", "rr_param", "xyz")
...

5.4. dlg_flag (integer)

Flag to be used for marking if a dialog should be constructed for the current request (this make sense only for initial requests).

Default value is none.

Example 1.4. Set dlg_flag parameter

...
modparam("dialog", "dlg_flag", 4)
...

5.5. timeout_avp (string)

The specification of an AVP that contain a custom timeout (in seconds) for the dialog. It may be used only in a request (initial or sequential) context

Default value is none.

Example 1.5. Set timeout_avp parameter

...
modparam("dialog", "timeout_avp", "$avp(i:10)")
...

5.6. default_timeout (integer)

The default dialog timeout (in seconds) if no custom one is set.

Default value is 43200 (12 hours).

Example 1.6. Set default_timeout parameter

...
modparam("dialog", "default_timeout", 21600)
...

5.7. dlg_extra_hdrs (string)

A string containing the extra headers (full format, with EOH) to be added in the requests generated by the module (like BYEs).

Default value is NULL.

Example 1.7. Set dlf_extra_hdrs parameter

...
modparam("dialog", "dlg_extra_hdrs", "Hint: credit expired\r\n")
...

5.8. dlg_match_mode (integer)

How the sequential requests should be matched against the known dialogs. The modes are a combination between matching based on a cookie (DID) stored as cookie in Record-Route header and the matching based on SIP elements (as in RFC3261).

The supported modes are:

  • 0 - DID_ONLY - the match is done exclusively based on DID;

  • 1 - DID_FALLBACK - the match is first tried based on DID and if not present, it will fallback to SIP matching;

  • 2 - DID_NONE - the match is done exclusively based on SIP elements; no DID information is added in RR.

Default value is 0 (DID_ONLY).

Example 1.8. Set dlg_match_mode parameter

...
modparam("dialog", "dlg_match_mode", 1)
...

5.9. detect_spirals (integer)

Whether spirals (i.e., messages routed through the proxy multiple times) should be detected or not.

If set to 0, spirals will not be detected and result in the generation of a new, possibly dangling dialog structure per occurring spiral. If set to 1, spirals are detected and internally mapped to existing dialog structures.

Default value is 1.

Example 1.9. Set detect_spirals parameter

...
modparam("dialog", "detect_spirals", 1)
...

5.10. db_url (string)

If you want to store the information about the dialogs in a database a database url must be specified.

Default value is mysql://openser:openserrw@localhost/openser.

Example 1.10. Set db_url parameter

...
modparam("dialog", "db_url", "dbdriver://username:password@dbhost/dbname")
...

5.11. db_mode (integer)

Describe how to push into the DB the dialogs' information from memory.

The supported modes are:

  • 0 - NO_DB - the memory content is not flushed into DB;

  • 1 - REALTIME - any dialog information changes will be reflected into the database immediatly.

  • 2 - DELAYED - the dialog information changes will be flushed into DB periodically, based on a timer routine.

  • 3 - SHUTDOWN - the dialog information will be flushed into DB only at shutdown - no runtime updates.

Default value is 0.

Example 1.11. Set db_mode parameter

...
modparam("dialog", "db_mode", 1)
...

5.12. db_update_period (integer)

The interval (seconds) at which to update dialogs' information if you chose to store the dialogs' info at a given interval. A too short interval will generate intensive database operations, a too large one will not notice short dialogs.

Default value is 60.

Example 1.12. Set db_update_period parameter

...
modparam("dialog", "db_update_period", 120)
...

5.13. db_fetch_rows (integer)

The number of the rows to be fetched at once from database when loading the dialog records at startup from the database. This value can be used to tune the load time at startup. For 1MB of private memory (default) it should be below 400. The database driver must support fetch_result() capability. A value of 0 means the functionality is disabled.

Default value is 200.

Example 1.13. Set db_fetch_rows parameter

...
modparam("dialog", "db_fetch_rows", 500)
...

5.14. table_name (string)

If you want to store the information about the dialogs in a database a table name must be specified.

Default value is dialog.

Example 1.14. Set table_name parameter

...
modparam("dialog", "table_name", "my_dialog")
...

5.15. callid_column (string)

The column name in the database to store the dialogs' callid.

Default value is callid.

Example 1.15. Set callid_column parameter

...
modparam("dialog", "callid_column", "callid_c_name")
...

5.16. from_uri_column (string)

The column name in the database to store the caller's sip address.

Default value is from_uri.

Example 1.16. Set from_uri_column parameter

...
modparam("dialog", "from_uri_column", "from_uri_c_name")
...

5.17. from_tag_column (string)

The column name in the database to store the From tag from the INVITE request.

Default value is from_tag.

Example 1.17. Set from_tag_column parameter

...
modparam("dialog", "from_tag_column", "from_tag_c_name")
...

5.18. to_uri_column (string)

The column name in the database to store the callee's sip address.

Default value is to_uri.

Example 1.18. Set to_uri_column parameter

...
modparam("dialog", "to_uri_column", "to_uri_c_name")
...

5.19. to_tag_column (string)

The column name in the database to store the To tag from the 200 OK response to the INVITE request, if present.

Default value is to_tag.

Example 1.19. Set to_tag_column parameter

...
modparam("dialog", "to_tag_column", "to_tag_c_name")
...

5.20. caller_cseq_column (string)

The column name in the database to store the cseq from caller side.

Default value is caller_cseq.

Example 1.20. Set caller_cseq_column parameter

...
modparam("dialog", "caller_cseq_column", "column_name")
...

5.21. callee_cseq_column (string)

The column name in the database to store the cseq from callee side.

Default value is callee_cseq.

Example 1.21. Set callee_cseq_column parameter

...
modparam("dialog", "callee_cseq_column", "column_name")
...

5.22. caller_route_column (string)

The column name in the database to store the route records from caller side (proxy to caller).

Default value is caller_route_set.

Example 1.22. Set caller_route_column parameter

...
modparam("dialog", "caller_route_column", "column_name")
...

5.23. callee_route_column (string)

The column name in the database to store the route records from callee side (proxy to callee).

Default value is callee_route_set.

Example 1.23. Set to_route_column parameter

...
modparam("dialog", "to_route_column", "column_name")
...

5.24. caller_contact_column (string)

The column name in the database to store the caller's contact uri.

Default value is from_contact.

Example 1.24. Set caller_contact_column parameter

...
modparam("dialog", "caller_contact_column", "column_name")
...

5.25. callee_contact_column (string)

The column name in the database to store the callee's contact uri.

Default value is callee_contact.

Example 1.25. Set callee_contact_column parameter

...
modparam("dialog", "callee_contact_column", "column_name")
...

5.26. caller_sock_column (string)

The column name in the database to store the information about the local interface receiving the traffic from caller.

Default value is caller_sock.

Example 1.26. Set caller_sock_column parameter

...
modparam("dialog", "caller_sock_column", "column_name")
...

5.27. callee_sock_column (string)

The column name in the database to store information about the local interface receiving the traffic from callee.

Default value is callee_contact.

Example 1.27. Set callee_sock_column parameter

...
modparam("dialog", "callee_sock_column", "column_name")
...

5.28. h_id_column (string)

The column name in the database to store the dialogs' hash id information.

Default value is hash_id.

Example 1.28. Set h_id_column parameter

...
modparam("dialog", "h_id_column", "hash_id_c_name")
...

5.29. h_entry_column (string)

The column name in the database to store the dialogs' hash entry information.

Default value is hash_entry.

Example 1.29. Set h_entry_column parameter

...
modparam("dialog", "h_entry_column", "h_entry_c_name")
...

5.30. state_column (string)

The column name in the database to store the dialogs' state information.

Default value is state.

Example 1.30. Set state_column parameter

...
modparam("dialog", "state_column", "state_c_name")
...

5.31. start_time_column (string)

The column name in the database to store the dialogs' start time information.

Default value is start_time.

Example 1.31. Set start_time_column parameter

...
modparam("dialog", "start_time_column", "start_time_c_name")
...

5.32. timeout_column (string)

The column name in the database to store the dialogs' timeout.

Default value is timeout.

Example 1.32. Set timeout_column parameter

...
modparam("dialog", "timeout_column", "timeout_c_name")
...

5.33. sflags_column (string)

The column name in the database to store the script flags.

Default value is sflags.

Example 1.33. Set sflags_column parameter

...
modparam("dialog", "sflags_column", "s_flags")
...

5.34. toroute_column (string)

The column name in the database to store the index of the route to be executed at timeout.

Default value is toroute.

Example 1.34. Set toroute_column parameter

...
modparam("dialog", "toroute_column", "timeout_route")
...

5.35. vars_table_name (string)

If you want to store the variables for a dialog in a database a table name must be specified.

Default value is dialog_vars.

Example 1.35. Set vars_table_name parameter

...
modparam("dialog", "vars_table_name", "my_dialog_vars")
...

5.36. vars_h_id_column (string)

The column name in the database to store the dialogs' hash id information (as a reference to the dialog table).

Default value is hash_id.

Example 1.36. Set vars_h_id_column parameter

...
modparam("dialog", "vars_h_id_column", "vars_h_id_name")
...

5.37. vars_h_entry_column (string)

The column name in the database to store the dialogs' hash entry information (as a reference to the dialog table).

Default value is hash_entry.

Example 1.37. Set vars_h_entry_column parameter

...
modparam("dialog", "vars_h_entry_column", "vars_h_entry_name")
...

5.38. vars_key_column (string)

The column name in the database to store the keys of a variable.

Default value is dialog_key.

Example 1.38. Set vars_key_column parameter

...
modparam("dialog", "vars_key_column", "vars_key_name")
...

5.39. vars_value_column (string)

The column name in the database to store the keys of a variable.

Default value is dialog_value.

Example 1.39. Set vars_value_column parameter

...
modparam("dialog", "vars_value_column", "vars_value_name")
...

5.40. profiles_with_value (string)

List of names for profiles with values.

Default value is empty.

Example 1.40. Set profiles_with_value parameter

...
modparam("dialog", "profiles_with_value", "caller ; my_profile")
...

5.41. profiles_no_value (string)

List of names for profiles without values.

Default value is empty.

Example 1.41. Set profiles_no_value parameter

...
modparam("dialog", "profiles_no_value", "inbound ; outbound")
...

5.42. bridge_controller (string)

SIP address to be used in From header when initiating a call bridge.

Default value is sip:controller@kamailio.org.

Example 1.42. Set bridge_controller parameter

...
modparam("dialog", "bridge_controller", "sip:ctd@kamailio.org")
...

5.43. initial_cbs_inscript (string)

If the initial dialog callbacks (i.e., DLGCB_CREATED and DLGCB_SPIRALED) should be executed in-script or post-script. If dlg_manage() is not used, the setting of this parameter does not matter; otherwise, initial callbacks will be executed directly after dlg_manage() is called if this parameter is enabled. If it is disabled, initial callback execution will be postponed until configuration script execution completes.

The supported values are:

  • 0 - POST-SCRIPT - execute initial callbacks after the script completes;

  • 1 - IN-SCRIPT - execute initial callbacks during script execution, i.e., right after dlg_manage() is called;

Default value is 1.

Example 1.43. Set initial_cbs_inscript parameter

...
modparam("dialog", "initial_cbs_inscript", "0")
...

6. Functions

6.1.  set_dlg_profile(profile,[value])

Inserts the current dialog into a profile. Note that if the profile does not supports values, this will be silently discarded. Also, there is no check for inserting the same dialog in the same profile for multiple times.

Meaning of the parameters is as follows:

  • profile - name of the profile to be added to;

  • value (optional) - string value to define the belonging of the dialog to the profile - note that the profile must support values. Pseudo-variables are supported.

This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, REPLY_ROUTE and FAILURE_ROUTE.

Example 1.44. set_dlg_profile usage

...
set_dlg_profile("inbound_call");
set_dlg_profile("caller","$fu");
...

6.2.  unset_dlg_profile(profile,[value])

Removes the current dialog from a profile.

Meaning of the parameters is as follows:

  • profile - name of the profile to be removed from;

  • value (optional) - string value to define the belonging of the dialog to the profile - note that the profile must support values. Pseudo-variables are supported.

This function can be used from BRANCH_ROUTE, REPLY_ROUTE and FAILURE_ROUTE.

Example 1.45. unset_dlg_profile usage

...
unset_dlg_profile("inbound_call");
unset_dlg_profile("caller","$fu");
...

6.3.  is_in_profile(profile,[value])

Checks if the current dialog belongs to a profile. If the profile supports values, the check can be reinforced to take into account a specific value - if the dialog was inserted into the profile for a specific value. If no value is passed, only the simply belonging of the dialog to the profile is checked. Note that if the profile does not supports values, this will be silently discarded.

Meaning of the parameters is as follows:

  • profile - name of the profile to be checked against;

  • value (optional) - string value to further restrict the check. Pseudo-variables are supported.

This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, REPLY_ROUTE and FAILURE_ROUTE.

Example 1.46. is_in_profile usage

...
if (is_in_profile("inbound_call")) {
	log("this request belongs to a inbound call\n");
}
...
if (is_in_profile("caller","XX")) {
	log("this request belongs to a call of user XX\n");
}
...

6.4.  get_profile_size(profile,[value],size)

Returns the number of dialogs belonging to a profile. If the profile supports values, the check can be reinforced to take into account a specific value - how many dialogs were inserted into the profile with a specific value. If no value is passed, only simply belonging of the dialog to the profile is checked. Note that if the profile does not supports values, this will be silently discarded.

Meaning of the parameters is as follows:

  • profile - name of the profile to get the size for;

  • value (optional) - string value to further restrict the check. Pseudo-variables are supported;

  • size - an AVP or script variable to return the profile size in.

This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, REPLY_ROUTE and FAILURE_ROUTE.

Example 1.47. get_profile_size usage

...
if(get_profile_size("inbound_call","$avp(size)"))
    xlog("currently there are $avp(size) inbound calls\n");
...
if(get_profile_size("caller","$fu","$avp(size)"))
    xlog("currently, the user $fu has $avp(size) active outgoing calls\n");
...

6.5.  dlg_isflagset(flag)

Check if the dialog flag is set or not.

Meaning of the parameters is as follows:

  • flag - index of the flag - can be pseudo-variable.

This function can be used from BRANCH_ROUTE, REQUEST_ROUTE, ONREPLY_ROUTE and FAILURE_ROUTE.

Example 1.48. dlg_isflagset usage

...
if(dlg_isflagset("1"))
{
    ...
}
...

6.6.  dlg_setflag(flag)

Set the dialog flag.

Meaning of the parameters is as follows:

  • flag - index of the flag - can be pseudo-variable.

This function can be used from BRANCH_ROUTE, REQUEST_ROUTE, ONREPLY_ROUTE and FAILURE_ROUTE.

Example 1.49. dlg_setflag usage

...
dlg_setflag("1");
...

6.7.  dlg_resetflag(flag)

Reset the dialog flag.

Meaning of the parameters is as follows:

  • flag - index of the flag - can be pseudo-variable.

This function can be used from BRANCH_ROUTE, REQUEST_ROUTE, ONREPLY_ROUTE and FAILURE_ROUTE.

Example 1.50. dlg_resetflag usage

...
redlg_setflag("1");
...

6.8.  dlg_bye(side)

Send BYE to parties in dialog.

Meaning of the parameters is as follows:

  • side - where to send the BYE. It can be: caller, callee or both of them.

This function can be used from BRANCH_ROUTE, REQUEST_ROUTE, ONREPLY_ROUTE and FAILURE_ROUTE.

Example 1.51. dlg_bye usage

...
dlg_bye("all");
...

6.9.  dlg_refer(side, address)

Refer the 'side' to a new SIP 'address'.

Meaning of the parameters is as follows:

  • side - which part to REFER. It can be: caller or callee.

  • address - SIP address to refer to.

This function can be used from BRANCH_ROUTE, REQUEST_ROUTE, ONREPLY_ROUTE and FAILURE_ROUTE.

Example 1.52. dlg_refer usage

...
dlg_refer("caller", "sip:annoucement@kamailio.org");
...

6.10.  dlg_manage()

Process current SIP request with dialog module. It is alternative to setting dialog flag for initial INVITE and Route-parameter-callback execution for within-dialog requests.

This function can be used from REQUEST_ROUTE.

Example 1.53. dlg_manage usage

...
modparam("dialog", "default_timeout", 100)
...
route {
...
    if(is_method("INVITE") && !has_totag())
    {
        $dlg_ctx(timeout_route) = 12;
        $dlg_ctx(timeout_bye) = 1;
    }
    dlg_manage();
...
}
...

6.11.  dlg_bridge(from, to, op)

Bridge 'from' SIP address to 'to' SIP address via outbound proxy 'op'.

Meaning of the parameters is as follows:

  • from - SIP address of first side to call.

  • to - SIP address to refer from to.

  • op - outbound proxy SIP address.

This function can be used from BRANCH_ROUTE, REQUEST_ROUTE, ONREPLY_ROUTE and FAILURE_ROUTE.

Example 1.54. dlg_bridge usage

...
dlg_bridge("sip:user@kamailio.org", "sip:annoucement@kamailio.org",
   "sip:kamailio.org:5080");
...

6.12.  dlg_get(callid, ftag, ttag)

Search and set current dialog based on Call-ID, From-Tag and To-Tag parameters.

Meaning of the parameters is as follows:

  • callid - SIP call-id.

  • ftag - SIP From tag.

  • ttag - SIP To tag.

This function can be used from BRANCH_ROUTE, REQUEST_ROUTE, ONREPLY_ROUTE and FAILURE_ROUTE.

Example 1.55. dlg_get usage

...
if(dlg_get("abcdef", "123", "456"))
{
	dlg_bye("all");
}
...

6.13.  is_known_dlg()

This function checks if the current SIP message being processed belongs to any transaction within an active dialog that the dialog module is currently tracking. This is a check for tracking of any kind, without regard to profiles.

This function has numerous potential applications, among which is that it can be used to strengthen security for loose-routing sequential (in-dialog) requests or responses to them, as by providing a preventative check against spoofing on the proxy level instead of leaving the issue purely to the receiving UA.

This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, REPLY_ROUTE and FAILURE_ROUTE.

Example 1.56. is_known_dlg() usage

...
if(!uri == myself) {
	if(is_known_dlg()) {
		xlog("Request $rm from $ci is in-dialog\n");
	}
}
...

7. Exported statistics

7.1. active_dialogs

Returns the number of current active dialogs (may be confirmed or not).

7.2. early_dialogs

Returns the number of early dialogs.

7.3. processed_dialogs

Returns the total number of processed dialogs (terminated, expired or active) from the startup.

7.4. expired_dialogs

Returns the total number of expired dialogs from the startup.

7.5. failed_dialogs

Returns the number of failed dialogs.

8. MI Commands

8.1. dlg_list

Lists the description of a dialog or of all dialogs (calls). If only one dialogs is to be listed, the dialog identifiers are to be passed as parameter (callid and fromtag).

Name: dlg_list

Parameters:

  • callid (optional) - callid if a single dialog to be listed.

  • from_tag (optional, but cannot be present without the callid parameter) - from tag (as per initial request) of the dialog to be listed. Note that if the from_tag is not specified, only dialogs created by a request without a from tag are matched, which will only occur with broken clients and is thus a very rare situation.

MI FIFO Command Format:

		:dlg_list:_reply_fifo_file_
		_empty_line_
		:dlg_list:_reply_fifo_file_
		abcdrssfrs122444@192.168.1.1
		AAdfeEFF33

8.2. dlg_list_ctx

The same as the dlg_list but including in the dialog description the associated context from modules sitting on top of the dialog module.

Name: dlg_list_ctx

Parameters: see dlg_list

MI FIFO Command Format:

		:dlg_list_ctx:_reply_fifo_file_
		_empty_line_

8.3. dlg_end_dlg

Terminates a confirmed dialog by sending BYE requests in both directions.

Name: dlg_end_dlg

Parameters:

  • h_entry - hash entry of the dialog in the internal dialog table

  • h_id - hash id of the dialog on the hash entry

  • extra_hdrs - (optional) string containg extra headers (full format) to be added to the BYE requests.

The values for the h_entry and h_id can be get via the dlg_list MI command.

Note: Works only for confirmed dialogs.

MI FIFO Command Format:

		:dlg_end_dlg:_reply_fifo_file_
		342
		56
		_empty_line_

8.4. dlg_terminate_dlg

Terminates a singe dialog, identified by a Call-ID.

Name: dlg_terminate_dlg

Parameters:

  • callid - callid of the dialog to be terminated.

  • from_tag (optional, but cannot be present without the callid parameter) - from tag (as per initial request) of the dialog to be terminated. Note that if the from_tag is not specified, only dialogs created by a request without a from tag are matched, which will only occur with broken clients and is thus a very rare situation.

Note: Works only for confirmed dialogs.

MI FIFO Command Format:

		:dlg_terminate_dlg:_reply_fifo_file_
		abcdrssfrs122444@192.168.1.1
		AAdfeEFF33

8.5. profile_get_size

Returns the number of dialogs belonging to a profile. If the profile supports values, the check can be reinforced to take into account a specific value - how many dialogs were inserted into the profile with a specific value. If no value is passed, only the simply belonging of the dialog to the profile is checked. Note that if the profile does not supports values, this will be silently discarded.

Name: profile_get_size

Parameters:

  • profile - name of the profile to get the value for.

  • value (optional)- string value to further restrict the check;

MI FIFO Command Format:

		:profile_get_size:_reply_fifo_file_
		inbound_calls
		_empty_line_

8.6. profile_list_dlgs

Lists all the dialogs belonging to a profile. If the profile supports values, the check can be reinforced to take into account a specific value - list only the dialogs that were inserted into the profile with that specific value. If no value is passed, all dialogs belonging to the profile will be listed. Note that if the profile does not supports values, this will be silently discarded.

Name: profile_list_dlgs

Parameters:

  • profile - name of the profile to list the dialog for.

  • value (optional)- string value to further restrict the check;

MI FIFO Command Format:

		:profile_list_dlgs:_reply_fifo_file_
		inbound_calls
		_empty_line_

8.7. dlg_bridge

Bridge two SIP addresses in a call using INVITE(hold)-REFER-BYE mechanism.

Name: dlg_bridge

Parameters:

  • from - SIP address to initiate the call

  • to - SIP address to refer 'from' to

  • op (optional) - outbound proxy SIP address

MI FIFO Command Format:

		:dlg_bridge:_reply_fifo_file_
		from
		to
		op
		_empty_line_

9. Exported RPC Functions

9.1. dlg.list

Lists the description of all dialogs (calls).

Name: dlg.list

RPC Command Format:

		serctl dlg_list

9.2. dlg.list_ctx

The same as the dlg_list but including in the dialog description the associated context from modules sitting on top of the dialog module.

Name: dlg.list_ctx

RPC Command Format:

		serctl dlg.list_ctx

9.3. dlg.dlg_list

Lists the description of one dialog. The dialog identifiers are to be passed as parameter (callid and fromtag).

Name: dlg.dlg_list

Parameters:

  • callid callid of the dialog to be listed.

  • from_tag from tag (as per initial request) of the dialog to be listed.

RPC Command Format:

		serctl dlg.list abcdrssfrs122444@192.168.1.1 AAdfeEFF33

9.4. dlg.dlg_list_ctx

The same as the dlg.list_ctx but including in the dialog description the associated context from modules sitting on top of the dialog module.

Name: dlg.dlg_list_ctx

Parameters: see dlg_list

RPC Command Format:

		serctl dlg.list_ctx abcdrssfrs122444@192.168.1.1 AAdfeEFF33

9.5. dlg.end_dlg

Terminates an ongoing dialog by sending BYE in both directions.

Name: dlg.end_dlg

Parameters:

  • h_entry - hash entry of the dialog in the internal dialog table

  • h_id - hash id of the dialog on the hash entry

  • extra_hdrs - (optional) string containg extra headers (full format) to be added to the BYE requests.

The values for the h_entry and h_id can be get via the dlg_list RPC command.

RPC Command Format:

		serctl dlg.end_dlg 342 56

9.6. dlg.profile_get_size

Returns the number of dialogs belonging to a profile. If the profile supports values, the check can be reinforced to take into account a specific value - how many dialogs were inserted into the profile with a specific value. If no value is passed, only the simply belonging of the dialog to the profile is checked. Note that if the profile does not supports values, this will be silently discarded.

Name: dlg.profile_get_size

Parameters:

  • profile - name of the profile to get the value for.

  • value (optional)- string value to further restrict the check;

RPC Command Format:

		serctl dlg.dlg.profile_get_size inbound_calls

9.7. dlg.profile_list

Lists all the dialogs belonging to a profile. If the profile supports values, the check can be reinforced to take into account a specific value - list only the dialogs that were inserted into the profile with that specific value. If no value is passed, all dialogs belonging to the profile will be listed. Note that if the profile does not supports values, this will be silently discarded.

Name: dlg.profile_list

Parameters:

  • profile - name of the profile to list the dialog for.

  • value (optional)- string value to further restrict the check;

RPC Command Format:

		serctl dlg.profile_list inbound_calls

9.8. dlg.bridge_dlg

Bridge two SIP addresses in a call using INVITE(hold)-REFER-BYE mechanism.

Name: dlg.bridge_dlg

Parameters:

  • from - SIP address to initiate the call

  • to - SIP address to refer 'from' to

  • op (optional) - outbound proxy SIP address

RPC Command Format:

		serctl dlg.list from to op

10. Exported pseudo-variables

10.1. $DLG_count

Returns the number of current active dialogs (may be confirmed or not).

10.2. $DLG_status

Returns the status of the dialog corresponding to the processed sequential request. This PV will be available only for sequential requests, after doing loose_route().

Value may be:

  • NULL - Dialog not found.

  • 3 - Confirmed by a final reply but no ACK received yet.

  • 4 - Confirmed by a final reply and ACK received.

  • 5 - Dialog ended.

10.3. $DLG_lifetime

Returns the duration (in seconds) of the dialog corresponding to the processed sequential request. The duration is calculated from the dialog confirmation and the current moment. This PV will be available only for sequential requests, after doing loose_route().

NULL will be returned if there is no dialog for the request.

10.4. $dlg(...)

Access to dialog attributes.

10.5. $dlg_ctx(...)

Access to dialog context attributes.

10.6. $dlg_var(key)

This is a read/write variable that can be used to store custom values assigned with a dialog (e.g. the URI of a billing-server, an assigned emergency-server). This pseudo-variable will be available only for subsequential requests after doing loose_route().

Note: You will receive "NULL", if there is no dialog for this request.

Chapter 2. Developer Guide

1. Available Functions

1.1.  register_dlgcb (dialog, type, cb, param, free_param_cb)

Register a new callback to the dialog.

Meaning of the parameters is as follows:

  • struct dlg_cell* dlg - dialog to register callback to. If maybe NULL only for DLGCB_CREATED callback type, which is not a per dialog type.

  • int type - types of callbacks; more types may be register for the same callback function; only DLGCB_CREATED must be register alone. Possible types:

    • DLGCB_LOADED

    • DLGCB_CREATED - called when a new dialog is created - it's a global type (not associated to any dialog)

    • DLGCB_FAILED - called when the dialog was negatively replied (non-2xx) - it's a per dialog type.

    • DLGCB_CONFIRMED_NA - called when the dialog is confirmed (2xx replied) but the setup-concluding ACK message from the caller is yet pending - it's a per dialog type.

    • DLGCB_CONFIRMED - called when the dialog is confirmed (2xx replied) and the setup-concluding ACK message from the caller has been seen - it's a per dialog type.

    • DLGCB_REQ_WITHIN - called when the dialog matches a sequential request (excluding setup-concluding ACK messages which are handled in DLGCB_CONFIRMED) - it's a per dialog type.

    • DLGCB_TERMINATED - called when the dialog is terminated via BYE - it's a per dialog type.

    • DLGCB_TERMINATED_CONFIRMED - called when response to a BYE request is received - it's a per dialog type.

    • DLGCB_EXPIRED - called when the dialog expires without receiving a BYE - it's a per dialog type.

    • DLGCB_EARLY - called when the dialog is created in an early state (18x replied) - it's a per dialog type.

    • DLGCB_RESPONSE_FWDED - called when the dialog matches a reply to the initial INVITE request - it's a per dialog type.

    • DLGCB_RESPONSE_WITHIN - called when the dialog matches a reply to a subsequent in dialog request - it's a per dialog type.

    • DLGCB_MI_CONTEXT - called when the mi dlg_list_ctx command is invoked - it's a per dialog type.

    • DLGCB_SPIRALED - called when the dialog matches a spiraling request - it's a per dialog type.

    • DLGCB_DESTROY

  • dialog_cb cb - callback function to be called. Prototype is: void (dialog_cb) (struct dlg_cell* dlg, int type, struct dlg_cb_params * params);

  • void *param - parameter to be passed to the callback function.

  • param_free callback_param_free - callback function to be called to free the param. Prototype is: void (param_free_cb) (void *param);

1.2.  terminate_dlg (dlg, hdrs)

Terminate a Dialog

Meaning of parameters is as follows:

  • struct dlg_cell* dlg - dialog to terminate.

  • str* hdrs - string containg extra headers (full format) to be added to the BYE requests of the dialog.

Chapter 3. Frequently Asked Questions

3.1. What happend with “use_tight_match” parameter?
3.2. Where can I find more about Kamailio?
3.3. Where can I post a question about this module?
3.4. How can I report a bug?

3.1.

What happend with use_tight_match parameter?

The parameter was removed with version 1.3 as the option of tight matching became mandatory and not configurable. Now, the tight matching is done all the time (when using DID matching).

3.2.

Where can I find more about Kamailio?

Take a look at http://www.kamailio.org/.

3.3.

Where can I post a question about this module?

First at all check if your question was already answered on one of our mailing lists:

E-mails regarding any stable Kamailio release should be sent to and e-mails regarding development versions should be sent to .

If you want to keep the mail private, send it to .

3.4.

How can I report a bug?

Please follow the guidelines provided at: http://sip-router.org/tracker.