The IMS PCSCF-Registrar Module

Dragos Vingarzan

FhG Fokus

Jason Penton

Smile Communications

Richard Good

Smile Communications

Carsten Bock

ng-voice GmbH

Table of Contents

1. Admin Guide
1. Overview
2. Dependencies
2.1. Kamailio Modules
2.2. External Libraries or Applications
3. Parameters
3.1. pcscf_uri (string)
3.2. pending_reg_expires (int)
3.3. received_avp (string)
3.4. is_registered_fallback2ip (int)
3.5. publish_reginfo (int)
3.6. subscribe_to_reginfo (int)
3.7. subscription_expires (int)
3.8. ignore_contact_rxport_check (int)
3.9. ignore_reg_state (int)
3.10. force_icscf_uri (string)
3.11. reginfo_queue_size_threshold (int)
4. Functions
4.1. pcscf_save(domain)
4.2. pcscf_save_pending(domain)
4.3. pcscf_follows_service_routes(domain)
4.4. pcscf_force_service_routes(domain)
4.5. pcscf_is_registered(domain)

List of Examples

1.1. pcscf_uri parameter usage
1.2. pending_reg_expires parameter usage
1.3. received_avp parameter usage
1.4. is_registered_fallback2ip parameter usage
1.5. publish_reginfo parameter usage
1.6. subscribe_to_reginfo parameter usage
1.7. subscription_expires parameter usage
1.8. ignore_contact_rxport_check parameter usage
1.9. ignore_reg_state parameter usage
1.10. force_icscf_uri parameter usage
1.11. reginfo_queue_size_threshold parameter usage
1.12. pcscf_save

Chapter 1. Admin Guide

1. Overview

This module contains all methods related for usage of Kamailio as a Proxy-CSCF.

2. Dependencies

2.1. Kamailio Modules

The Following modules must be loaded before this module:

  • Usrloc PCSCF

  • PUA - if reginfo is used.

2.2. External Libraries or Applications

This modules requires the internal IMS library.

3. Parameters

3.1. pcscf_uri (string)

URI of this Proxy-CSCF.

Example 1.1. pcscf_uri parameter usage

...
modparam("ims_registrar_pcscf", "pcscf_uri", "pcscf.mnc001.mcc001.3gppnetwork.org")
...

3.2. pending_reg_expires (int)

How long (in seconds), until pending (uncomplete) Registrations expire

Default value is 30.

Example 1.2. pending_reg_expires parameter usage

...
modparam("ims_registrar_pcscf", "pending_reg_expires", 15)
...

3.3. received_avp (string)

AVP, holding the received information (optional)

Example 1.3. received_avp parameter usage

...
modparam("ims_registrar_pcscf", "received_avp", "$avp(i:42)")
...

3.4. is_registered_fallback2ip (int)

Defines, whether a contact should be searched by it's contact only or alternatively by the received IP-Address.

The option may have the following values:

  • 0 Search by Contact-Header only

  • 1 Search by Contact-Header, if this fails, search by Received Information (IP, Port, Proto)

  • 2 Search by Received Information (IP, Port, Proto), if this fails, Search by Contact Header

This Parameter is primarily used by the "is_registered" function.

Default value is 0 (Contact only).

Example 1.4. is_registered_fallback2ip parameter usage

...
modparam("ims_registrar_pcscf", "is_registered_fallback2ip", 2)
...

3.5. publish_reginfo (int)

If set to "1", the module will send PUBLISH regarding changes of the registration (e.g. due to Rx-Information) towards the network core.

Default value is 0 (Do not send PUBLISH).

Example 1.5. publish_reginfo parameter usage

...
modparam("ims_registrar_pcscf", "publish_reginfo", 1)
...

3.6. subscribe_to_reginfo (int)

If set to "1", the module will send a SUBSCRIBE for the registration status towards the network core.

Default value is 0 (Do not send SUBSCRIBE).

Example 1.6. subscribe_to_reginfo parameter usage

...
modparam("ims_registrar_pcscf", "subscribe_to_reginfo", 1)
...

3.7. subscription_expires (int)

How long should the subscription of reg-info towards the packet-core be valid?

Default value is 3600.

Example 1.7. subscription_expires parameter usage

...
modparam("ims_registrar_pcscf", "subscription_expires", 7200)
...

3.8. ignore_contact_rxport_check (int)

Validate, if the port, from which the request was received, is the same as used during registration.

This Parameter is primarily used by the "is_registered" function.

Default value is 0 (do not ignore Ports).

Example 1.8. ignore_contact_rxport_check parameter usage

...
modparam("ims_registrar_pcscf", "ignore_contact_rxport_check", 1)
...

3.9. ignore_reg_state (int)

Validate, if the found contact is really and completely registered.

This Parameter is primarily used by the "is_registered" function.

Default value is 0 (do not ignore registration state).

Example 1.9. ignore_reg_state parameter usage

...
modparam("ims_registrar_pcscf", "ignore_reg_state", 1)
...

3.10. force_icscf_uri (string)

Instead of doing a DNS-Lookup on the domain, always send the requests to a specific I-CSCF.

Default value is not set, do the DNS-Lookup.

Example 1.10. force_icscf_uri parameter usage

...
modparam("ims_registrar_pcscf", "force_icscf_uri", "sip:icscf.mnc001.mcc001.3gppnetwork.org")
...

3.11. reginfo_queue_size_threshold (int)

As reginfo operations are processed asynchronously, this parameter defines at what length of the queue, the length should be logged (in order to determine overload)

Default value is 0 (do not log queue length).

Example 1.11. reginfo_queue_size_threshold parameter usage

...
modparam("ims_registrar_pcscf", "reginfo_queue_size_threshold", 42)
...

4. Functions

4.1. pcscf_save(domain)

The function processes a reply to a REGISTER message. It can add, remove or modify location records (in usrloc) depending on Contact and Expires HFs in the REGISTER message.

Meaning of the parameters is as follows:

  • domain - Logical domain within the registrar. If a database is used then this must be name of the table which stores the contacts.

Example 1.12. pcscf_save

...
pcscf_save("location");
...

4.2. pcscf_save_pending(domain)

Same as pcscf_save(), but it will store the registration in a "Pending" state.

Meaning of the parameters is as follows:

  • domain - Logical domain within the registrar. If a database is used then this must be name of the table which stores the contacts.

4.3. pcscf_follows_service_routes(domain)

Returns true, if the request is following the "learned" service-routes during registration.

Meaning of the parameters is as follows:

  • domain - Logical domain within the registrar. If a database is used then this must be name of the table which stores the contacts.

4.4. pcscf_force_service_routes(domain)

Remove existing route-headers and force the Service-Routes, that were learned during registration.

Meaning of the parameters is as follows:

  • domain - Logical domain within the registrar. If a database is used then this must be name of the table which stores the contacts.

4.5. pcscf_is_registered(domain)

Returns true, if the request is coming from a "registered" endpoint.

Meaning of the parameters is as follows:

  • domain - Logical domain within the registrar. If a database is used then this must be name of the table which stores the contacts.