sr-dev November 2017

sr-dev@lists.kamailio.org

26 participants
481 discussions

[kamailio/kamailio] cfgt: doesn't support tm_suspend() tm_continue() (#684)

by Victor Seva

Actual implementation doesn't work with async. Need to investigate how to support it --- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/684

10 months

[kamailio/kamailio] tmx: t_reuse_branch() doesn't copy $du into new branch (#1264)

by Sebastian Damm

### Description When using the t_reuse_branch() function after a branch failure, Kamailio doesn't send out the call again if $du was filled and differed from $ru. Instead, Kamailio tries to send the call directly to $ru. I would expect that the call gets sent out the same way as the original call. ### Troubleshooting #### Reproduction You need a setup like this: UAC1 K(LB) <=> K(Proxy/Registrar) <=> K(LB) => UAC2 When a UAC registers, the Path module is used to save the LB (Loadbalancer) for outbound calls. When UAC1 calls UAC2, the original call gets sent through K(LB) to UAC2. However, if the first call gets rejected and the call gets retried through branch failure route, K(Proxy/Registrar) tries to send the call directly to the request URI. In your branch_route add a reference to a branch failure route: ```t_on_branch_failure("samplename");``` Then add a branch failure route like this: ```event_route[tm:branch-failure:handle_tls_branch] { if(t_check_status("488")) { if (isbflagset(0) && !isbflagset(1)) { t_reuse_branch(); setbflag(1); t_relay(); } } }``` When filling $du manually before sending out the call again, everything works. ### Possible Solutions The original destination URI should be copied to the reused branch. ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 4.4.5 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 4.7.2 ``` But from what I see in source code, the devel version still copies the same value. * **Operating System**:  ``` Debian Wheezy ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1264

12 months

[kamailio/kamailio] allow more than one tcp/tls connection to same destination (#1107)

by juha-h

When K connects to another SIP proxy over TCP or TLS, the connection is shared for all requests to that destination. If the receiving SIP proxy is K, it means that only one worker process is handling all those requests. This may become a bottleneck if processing of requests is time consuming, e.g., because of DB operations. It should therefore be possible one way or another to establish more than one parallel TCP or TLS connections to the same destination. One solution could be based on a function call, such as t_forward_connect(number), to be called before t_relay specifying the desired number of parallel connections shared randomly by outgoing requests. -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1107

12 months

[kamailio/kamailio] kazoo: incomplete documentation (#976)

by Ovidiu Sas

There are lots of module parameters that are not documented in the README file: "amqp_timmer_process_interval" "amqp_consumer_ack_timeout_micro" "amqp_consumer_ack_timeout_sec" "amqp_interprocess_timeout_micro" "amqp_interprocess_timeout_sec" "amqp_waitframe_timeout_micro" "amqp_waitframe_timeout_sec" "amqp_consumer_workers" "amqp_query_timeout_micro" "amqp_query_timeout_sec" "pua_include_entity" "json_escape_char" "app_name" "use_federated_exchange" "federated_exchange" "amqp_heartbeats" "amqp_primary_zone" "amqp_command_hashtable_size" "amqp_result_avp" "amqps_ca_cert" "amqps_cert" "amqps_key" "amqps_verify_peer" "amqps_verify_hostname" Also, the follwing functions are not documented: "kazoo_json_keys" "kazoo_async_query" -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/976

12 months

[kamailio/kamailio] Presentity tabla, faster update when drop TCP/TLS connection (#915)

by jresende

Hello, I'm testing kamailio with a SIP client with presence support, when I get a connection drop from a client (i.e when the client lost the access to the Internet connection) I do not receive the change in the status to offline immediately, I just received when the timeout from the presentity database finishes. I know that I'm able to change the expiry parameter from the presentity table, but that increases my battery consumption and the data exchange, the same happens if I reduce the publish interval on the client side. The connection with the server are connected with the TLS or TCP. @miconda Suggested that a solution could be: "For TCP/TLS, what can work, it's to use tcpops module which can execute an event route when a tcp/tls connection is dropped. If you track the association of connection id with the call-id of the presence publish, then you may be able to do some tricks and lower the expires of the published presence state. I haven't had the time to see what's possible there, but could worth investing. An alternative would be to enhance presence module to behave as registrar/usrloc (which can delete contact records on connection drop) to expire documents when tcp/tls connection is closed (not sure if anyone already added it)." -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/915

12 months

[kamailio/kamailio] support valgrind when *_MALLOC is used (#949)

by Victor Seva

As explain at https://www.kamailio.org/wiki/tutorials/troubleshooting/memory#pkg_with_sys… valgrind can be used to check memory leaks if kamailio is compiled without ``*_MALLOC``. I would like to support valgrind even if kamailio is compiled to use its own memory managers. In order to archive this, valgrind has to be informed of how those managers control the memory as described at http://valgrind.org/docs/manual/mc-manual.html#mc-manual.mempools -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/949

12 months

[kamailio/kamailio] dnssec: stop using libdnsval-dev for DNSSEC validation (#851)

by Victor Seva

From https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=843477 > From: Ondřej Surý <ondrej(a)debian.org> > To: Debian Bug Tracking System <submit(a)bugs.debian.org> > Subject: src:kamailio: stop using libval-dev for DNSSEC validation > > Package: src:kamailio > Version: 4.4.3-2 > Severity: serious > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA512 > > Dear maintainer, > > please stop using libdnsval-dev for DNSSEC validation. src:dnsval > is very poorly upstream maintained (SVN repository, issue tracker, > mailing list are non-functional) and I am going to schedule it for > removal for stretch. > > In a long term you should migrated to better and maintained library > (preferrably getdns or just libunbound), but now please just drop > it. > > Cheers, > Ondrej > > - -- System Information: > Debian Release: 8.6 > APT prefers stable-updates > APT policy: (500, 'stable-updates'), (500, 'proposed-updates'), (500, 'stable') > Architecture: amd64 (x86_64) > > Kernel: Linux 4.2.0-41-generic (SMP w/24 CPU cores) > Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/dash > Init: systemd (via /run/systemd/system) > > -----BEGIN PGP SIGNATURE----- So I'm going to remove **dnssec** module from the official Debian package -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/851

12 months

[kamailio/kamailio] track_cseq_updates does not update Rack SIP header in PRACK. (#801)

by scfcplummy

Hi, When using dialog module and track_cseq_updates when needing to update CSeq for authenticated invites, if early media is present the CSeq in the Rack header is not also incremented. Kamailio version: version: kamailio 4.4.2 (x86_64/linux) 892ad6 flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 892ad6 compiled on 11:18:36 Sep 28 2016 with gcc 5.4.0 -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/801

12 months

[kamailio/kamailio] sca: implement db_mode only (#781)

by Victor Seva

Sipwise hat ON: We have more than one server and we need to keep things in db in order to share sca subscription/appearance between servers -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/781

12 months

[kamailio/kamailio] dialplan: implement Iterative dialplan matching (#764)

by Victor Seva

>From http://lists.kamailio.org/pipermail/sr-dev/2016-August/036231.html On 24/08/16 10:17, Andreas Granig wrote: > Hi, > > When translating strings with the dialplan module, you sometimes end up > with very complex patterns for sanitizing the target string and > performing some replacements, since for a given dialplan id, processing > stops on the first match within the dialplan entries for a given dpid. > > The idea is to introduce a "continue" flag (default 0) in the dialplan > table indicating to proceed with processing further dialplan entries > within the given dpid after a match. The use case is to have a sanitize > rule with highest priority which e.g. removes any spaces, dashes and > parentheses from the target string, then with a lower priority do > further processing with the cleaned up string, e.g. stripping leading > double-zeroes or a plus when normalizing to E164 numbers, or replacing a > single leading zero with the country code and so on. > > This is particularly useful when a user dials a number from an address > book of some sort (e.g. on a mobile app) where number formats are stored > with country-specific formating characters like "+1-(234)-567 890", and > catching all of that in one rule results in really messy match/replace > patterns. -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/764

1 year

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev November 2017