September 2019 - sr-dev

[kamailio/kamailio] rtpengine module is not retrying for rtpengine_offer. retry is working for rtpengine_answer and rtpengine_delete (#1696)
by Surendra Tiwari 11 Aug '20

11 Aug '20

### Description we are using rtpengine with kamailio [KSR-LUA]. kamailio sending the rtpengine_offer to rtpengine. If kamailio didn't get the response from the rtpengine then it's not retrying . for rtpengine_answer and rtpengine_delete retry is working pretty good. we are using following rtpengine configuration # ----- rtpengine params ----- modparam("rtpengine", "db_url", DBURL) modparam("rtpengine", "table_name" , "rtpengine") modparam("rtpengine", "rtpengine_allow_op", 1) modparam("rtpengine", "queried_nodes_limit", 4) modparam("rtpengine", "rtpengine_retr", 2) modparam("rtpengine", "rtp_inst_pvar", "$avp(RTP_INSTANCE)") modparam("rtpengine", "setid_default", 1) modparam("rtpengine", "rtpengine_tout_ms", 400)  ### Troubleshooting #### Reproduction This issue can be reproduced by above configuration. and need to use rtpengine_offer,rtpengine_answer and rtpengine_delete with ksr lua routing.  #### Debugging Data  ``` (paste your debugging data here) ``` #### Log Messages  ``` (paste your log messages here) ``` #### SIP Traffic  ``` (paste your sip traffic here) ``` ### Possible Solutions  ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.1.4 (x86_64/linux) a1df59 flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: a1df59 compiled on 06:23:23 Oct 30 2018 with gcc 4.8.4 ``` * **Operating System**:  ``` root@ip-172-31-4-160:~# lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 14.04.5 LTS Release: 14.04 Codename: trusty root@ip-172-31-4-160:~# uname -a Linux ip-172-31-4-160 3.13.0-143-generic #192-Ubuntu SMP Tue Feb 27 10:45:36 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1696

3 4

[kamailio/kamailio] Active dialog stats stays static on a passive kamailio node that replicates dialogs via DMQ (#1692)
by Joel Serrano 11 Aug '20

11 Aug '20

### Description In a setup with 2 kamailios in active/passive with a virtual IP that failovers between them: sbc01 (active) is handling calls. sbc02 (passive) is started, and does an initial dialog sync via DMQ ``` root@sbc01:~# kamctl rpc stats.get_statistics all | grep dialog "dialog:active_dialogs = 39", "dialog:early_dialogs = 2", "dialog:expired_dialogs = 0", "dialog:failed_dialogs = 583", "dialog:processed_dialogs = 2527", root@sbc01:~# ``` ``` root@sbc02:/etc/kamailio# kamctl rpc stats.get_statistics all | grep dialog "dialog:active_dialogs = 39", "dialog:early_dialogs = 0", "dialog:expired_dialogs = 0", "dialog:failed_dialogs = 0", "dialog:processed_dialogs = 0", root@sbc02:/etc/kamailio# ``` >From that point onwards, as long as sbc01 stays as active, sbc02 stays as passive, and no restarts occur anywhere, the values for `dialog` metrics in sbc02 will not change and remain as they are, in the previous example, active_dialogs would remain as 39. ### Troubleshooting This was discovered during some tests from #1591 #### Reproduction Setup 2 kamailio instances that replicate dialogs via DMQ. 1- On Kamailio1 put some traffic to have some active dialogs (must call `dlg_manage()` in routing script for these test calls) 2- Start Kamailio2 3- Compare output of: `kamcmd stats.get_statistics dialog:` on both nodes. 4- Alter the amount of active dialogs on Kamailio1 (either end some or create new ones). 5- Repeat step 3. Kamailio1 --> Step5 will have different values from Step3. Kamailio2 --> Step5 will have exactly the same values from Step3. ### Possible Solutions `dialog:active_dialogs` should remain as 0 on Kamailio2, as technically there are no dialogs being handled by that server, it only has information of replicated dialogs and those stats are available in the `dlg.stats_active` metric. ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` # kamailio -V version: kamailio 5.2.0-pre1 (x86_64/linux) 2ecf60-dirty flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 2ecf60 -dirty compiled with gcc 6.3.0 ``` * **Operating System**:  ``` root@sbc02:~# lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 9.5 (stretch) Release: 9.5 Codename: stretch root@sbc02:~# uname -a Linux sbc02 4.9.0-8-amd64 #1 SMP Debian 4.9.110-3+deb9u6 (2018-10-08) x86_64 GNU/Linux root@sbc02:~# ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1692

2 2

[kamailio] Anyone thinking about adding JWT (JSON Web Token) support to Kamailio (#29)
by mading087 24 Jul '20

24 Jul '20

It seems a good idea to support JWT as a new SIP authorization method. Wonder if anyone is interested? Think auth_db would be the best spot to add support for JWT. --- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/29

12 24

[kamailio/kamailio] 180 Ringing without Contact with TOPOS enabled (#1720)
by Sergey Basov 05 Jun '20

05 Jun '20

### Description Kamailio with TOPOS enabled acts as a proxy between SIP client and SBC. When client sends "180 Ringing" without Contact header - kamailio does not forward it to SBC. If Contact header exists in "180 Ringing" - all works as expected. ### Troubleshooting #### Reproduction Load and configure topos module Make call with "180 Ringing" without Contact header - kamailio will not forward it. #### Log Messages ``` ERROR: topos [tps_storage.c:340]: tps_storage_link_msg(): bad sip message or missing Contact hdr ``` #### SIP Traffic ``` SIP/2.0 180 Ringing Via: SIP/2.0/TLS 1.2.3.4:5061;branch=z9hG4bKef45.8c75f0bae8a59dfaec6ff533ff0f3b2d.0 From: <sip:1111@1.2.3.4:5061>;tag=02000879948559 To: <sip:2.2.2.2@5.6.7.8:5061;transport=tls;user=phone>;tag=SDbsq8499-y2pMOVV Call-ID: apdW7374315131g0bcGhEfDjFof CSeq: 988207425 INVITE User-Agent: agent Supported: replaces, outbound Content-Length: 0 ``` ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.1.6 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select ``` * **Operating System**: ``` Red Hat Enterprise Linux Server 7.3 3.10.0-514.el7.x86_64 #1 SMP Wed Oct 19 11:24:13 EDT 2016 x86_64 x86_64 x86_64 GNU/Linux ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1720

5 19

[kamailio/kamailio] Configure permissions module without database (#2037)
by Sebastian Damm 25 May '20

25 May '20

### Description In our setup, we try to eliminate setup configuration in database and replace it with files. The advantage is, that we can maintain those files via puppet or ansible, and since we always rewrite the whole file, we don't have to take care about deleting obsolete entries. We can run different Kamailio versions without having problems with the version table when using the same database. And finally, we can stop all those local mysqld processes on a lot of machines. Modules like the dispatcher module were easy to change. But the permissions module is not prepared to run without database, if you want to use `allow_trusted()` or `allow_source_address()` and similar. The only option to feed those functions with data is a database table. ### Expected behavior We would like to place files for trusted and address into the Kamailio directory and have Kamailio read from those files during startup or after reload commands. #### Actual observed behavior Data for trusted and address have to reside inside a database. -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2037

3 4

[kamailio/kamailio] error: 'pkg/docker' does not have a commit checked out (#2003)
by Daniel-Constantin Mierla 19 May '20

19 May '20

When I just tried to do a commit today, I got the following error: ``` kamailio $ git ci . error: 'pkg/docker' does not have a commit checked out fatal: updating files failed ``` It is related to the `pkg/docker` submodule referencing to kamailio/kamailio-ci. Not sure if this is due to a new git version or something else, because I did commits in that folder a few days ago. To get is sorted out, I did: ``` kamailio $ git submodule update pkg/docker Submodule path 'pkg/docker' not initialized Maybe you want to use 'update --init'? kamailio $ git submodule update --init pkg/docker Submodule 'pkg/docker' (https://github.com/kamailio/kamailio-ci.git) registered for path 'pkg/docker' Cloning into '/.../kamailio/pkg/docker'... Submodule path 'pkg/docker': checked out 'b92a1c899b8c474afadd0cf29dd7cb4ea01a3466' ``` Then it worked to do the commit. I wonder if this is going to break the process we were used with, specially the installation guidelines from GIT repo. Therefore I open this item to see if we really need the to have `pkg/docker` submodule, or better have the docker files directly in the repo. Other options to keep things sane and simple? Git version: ``` $ git --version git version 2.22.0 ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2003

5 10

[kamailio/kamailio] [Feature Request] Python3 compatibility for dbtextdb (#1747)
by Anthony Messina 04 May '20

04 May '20

kamctl's dbtextdb.py fails to build in a Python3-only environment. Update dbtextdb to Python3. -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1747

4 12

[kamailio/kamailio] TLS module compiled with outdated OpenSSL version for Ubuntu bionic (#2018)
by welljsjs 14 Apr '20

14 Apr '20

### Description  Ubuntu Bionic 18.04.02 LTS ships with "OpenSSL 1.1.1 11 Sep 2018" (0x1010100f), whereas the `kamailio-tls-modules` package is compiled with "OpenSSL 1.1.0g 2 Nov 2017" (0x1010007f). I installed Kamailio from the Kamailio repositories (not from the Ubuntu repositories). This leads to Kamailio being unable to start as it complains about the OpenSSL versions being too different from each other. Overriding the OpenSSl version check by enabling `tls_force_run` does not solve the issue, instead, it leads to Kamailio emitting multiple errors.  #### Reproduction I installed Kamailio from the official Kamailio apt sources (nightly build, the same occurs for the latest stable version 5.2). ``` deb http://deb.kamailio.org/kamailiodev-nightly bionic main deb-src http://deb.kamailio.org/kamailiodev-nightly bionic main ``` I enabled TLS and edited the configuration files accordingly.    ``` (paste your debugging data here) ``` #### Log Messages ``` CRITICAL: tls [tls_init.c:677]: init_tls_h(): installed openssl library version is too different from the library the kamailio tls module was compiled with: installed "OpenSSL 1.1.1 11 Sep 2018" (0x1010100f), compiled "OpenSSL 1.1.0g 2 Nov 2017" (0x1010007f).#012 Please make sure a compatible version is used (tls_force_run in kamailio.cfg will override this check) ```  ### Possible Solutions Recompile and publish the `kamailio-tls-modules` package compiled with OpenSSL 1.1.1b. ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.3.0-dev6 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 7.3.0 ``` * **Operating System**:  ``` Linux hostname 4.15.0-55-generic #60-Ubuntu SMP Tue Jul 2 18:22:20 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux Description: Ubuntu 18.04.2 LTS Release: 18.04 ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2018

4 13

[kamailio/kamailio] Support for 192.0.0.0/29 as NATed source (#1488)
by dtryba 07 Apr '20

07 Apr '20

#### Pre-Submission Checklist    - [ ] Commit message has the format required by CONTRIBUTING guide - [ ] Commits are split per component (core, individual modules, libs, utils, ...) - [ ] Each component has a single commit (if not, squash them into one commit) - [ ] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [X] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [X] PR should be backported to stable branches - [ ] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  192.0.0.0/29 is a reserved subnet for NATtin IPv4 across an IPv6 netwerk. For example Dual Stack Lite carrier grade NAT. This is small change and updates the subnets used for NAT according to https://www.iana.org/assignments/iana-ipv4-special-registry/iana-ipv4-speci… You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/1488 -- Commit Summary -- * Support for -- File Changes -- M src/modules/ipops/detailed_ip_type.c (1) M src/modules/ipops/detailed_ip_type.h (2) M src/modules/nat_traversal/nat_traversal.c (3) M src/modules/nathelper/nathelper.c (1) -- Patch Links -- https://github.com/kamailio/kamailio/pull/1488.patch https://github.com/kamailio/kamailio/pull/1488.diff -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/1488

3 4

[kamailio/kamailio] app_python warning about strict-aliasing (#1249)
by Daniel-Constantin Mierla 12 Mar '20

12 Mar '20

Tracking here the issue exposed by @linuxmaniac via PR #924, as it was merged and then reverted (by #1248), so anyone can be aware of as well as comment/propose solutions for it. > Add "-fno-strict-aliasing" to compilation flags > > Fixes a slew of: > "dereferencing type-punned pointer will break strict-aliasing rules" > warnings from GCC for lines of the form: > Py_INCREF(Py_True); > and > Py_INCREF(Py_False); > > due to the cast from PyIntObject* to PyObject* > > GCC is technically correct here; see: > http://www.python.org/dev/peps/pep-3123/ > though this is unlikely to lead to non-working machine code. The initial proposed patch for `src/modules/app_python/Makefile` is: ``` @@ -22,6 +22,8 @@ ifeq ($(OS), freebsd) LIBS+=-pthread endif +# python2 https://www.python.org/dev/peps/pep-3123/ +DEFS+=-fno-strict-aliasing DEFS+=-I${PYTHON_INCDIR} DEFS+=-DKAMAILIO_MOD_INTERFACE ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1249

1 2