sr-dev December 2022

sr-dev@lists.kamailio.org

11 participants
265 discussions

[kamailio/kamailio] Using PATH makes nathelper to send the SIP ping to itself (#2011)

by pwakano

### Description When using the PATH header option to keep track of original Kamailio node that received the REGISTER, if nathelper is also used with SIP ping enabled, the SIP OPTIONS is sent to itself following the PATH header and not sent directly to the destination. The nathelper/user location modules should have a flag similar to the "path_check_local" of the registrar module, which is meant to avoid looping the message to itself in case the next hop pointed by the PATH header is "myself".  ### Troubleshooting #### Reproduction Configure the registrar module to support PATH and before saving the contact info add the PATH header with the local Kamailio information. Also make sure to have the nathelper and usrloc modules configured to send the keepalive SIP OPTIONS to the registered extensions. By the time the SIP OPTIONS is sent, Kamailio sends to itself, then the message has to be loose_route'd to the final destination. This could be avoided by having the nathelper module to identify the next hop is Kamailio itself skipping this destination as a call to "lookup()" does for the registrar module when the flag path_check_local is true.  #### SIP Traffic  172.128.128.10 is the Kamailio IP and 172.128.128.20 is the extension IP ``` 11:51:07.224713 IP (tos 0x60, ttl 64, id 64497, offset 0, flags [none], proto UDP (17), length 518) 172.128.128.10.5060 > 172.128.128.10.5060: SIP, length: 490 OPTIONS sip:345671002@172.128.128.20:5060;rinstance=d1eb3444a5cec5a1;transport=UDP SIP/2.0 Via: SIP/2.0/UDP 172.128.128.10:5060;branch=z9hG4bK2540713 Route: <sip:172.128.128.10:5060;received=sip:172.128.128.20:5060;lr;cluster_node=192.168.156.10:5060> From: sip:sbc@mydomain.com;tag=uloc-5d2e6499-2fb5-1-0-c15309d2 To: sip:345671002@172.128.128.20:5060;rinstance=d1eb3444a5cec5a1;transport=UDP Call-ID: 40ee1573-7506bba3-5e30c05(a)172.128.128.10 CSeq: 1 OPTIONS Content-Length: 0 11:51:07.226132 IP (tos 0x60, ttl 64, id 44359, offset 0, flags [none], proto UDP (17), length 502) 172.128.128.10.5060 > 172.128.128.20.5060: SIP, length: 474 OPTIONS sip:345671002@172.128.128.20:5060;rinstance=d1eb3444a5cec5a1;transport=UDP SIP/2.0 Via: SIP/2.0/UDP 172.128.128.10;branch=z9hG4bKb958.b807e80b742db62504a45220d8f0e974.0 Via: SIP/2.0/UDP 172.128.128.10:5060;branch=z9hG4bK2540713 From: sip:sbc@mydomain.com;tag=uloc-5d2e6499-2fb5-1-0-c15309d2 To: sip:345671002@172.128.128.20:5060;rinstance=d1eb3444a5cec5a1;transport=UDP Call-ID: 40ee1573-7506bba3-5e30c05(a)172.128.128.10 CSeq: 1 OPTIONS Content-Length: 0 11:51:07.303474 IP (tos 0x0, ttl 128, id 10816, offset 0, flags [none], proto UDP (17), length 786) 172.128.128.20.5060 > 172.128.128.10.5060: SIP, length: 758 SIP/2.0 200 OK Via: SIP/2.0/UDP 172.128.128.10;branch=z9hG4bKb958.b807e80b742db62504a45220d8f0e974.0 Via: SIP/2.0/UDP 172.128.128.10:5060;branch=z9hG4bK2540713 Contact: <sip:172.128.128.20:5060> To: <sip:345671002@172.128.128.20:5060;rinstance=d1eb3444a5cec5a1;transport=UDP>;tag=bb0c1f2d From: sip:sbc@mydomain.com;tag=uloc-5d2e6499-2fb5-1-0-c15309d2 Call-ID: 40ee1573-7506bba3-5e30c05(a)172.128.128.10 CSeq: 1 OPTIONS Accept: application/sdp, application/sdp Accept-Language: en Allow: INVITE, ACK, CANCEL, BYE, NOTIFY, REFER, MESSAGE, OPTIONS, INFO, SUBSCRIBE Supported: replaces, norefersub, extended-refer, timer, outbound, path, X-cisco-serviceuri User-Agent: Z 3.15.40006 rv2.8.20 Allow-Events: presence, kpml, talk Content-Length: 0 11:51:07.306821 IP (tos 0x60, ttl 64, id 64570, offset 0, flags [none], proto UDP (17), length 727) 172.128.128.10.5060 > 172.128.128.10.5060: SIP, length: 699 SIP/2.0 200 OK Via: SIP/2.0/UDP 172.128.128.10:5060;branch=z9hG4bK2540713 Contact: <sip:172.128.128.20:5060;alias=172.128.128.20~5060~1> To: <sip:345671002@172.128.128.20:5060;rinstance=d1eb3444a5cec5a1;transport=UDP>;tag=bb0c1f2d From: sip:sbc@mydomain.com;tag=uloc-5d2e6499-2fb5-1-0-c15309d2 Call-ID: 40ee1573-7506bba3-5e30c05(a)172.128.128.10 CSeq: 1 OPTIONS Accept: application/sdp, application/sdp Accept-Language: en Allow: INVITE, ACK, CANCEL, BYE, NOTIFY, REFER, MESSAGE, OPTIONS, INFO, SUBSCRIBE Supported: replaces, norefersub, extended-refer, timer, outbound, path, X-cisco-serviceuri User-Agent: Z 3.15.40006 rv2.8.20 Allow-Events: presence, kpml, talk Content-Length: 0 ``` ### Possible Solutions  Not found. ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` # kamailio -v version: kamailio 5.2.2 (x86_64/linux) 67f967 flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 67f967 compiled on 11:40:41 Mar 11 2019 with gcc 4.8.5 ``` * **Operating System**:  ``` # uname -a Linux kamailio-1 3.10.0-514.21.2.el7.x86_64 #1 SMP Tue Jun 20 12:24:47 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2011

6 months

[kamailio/kamailio] unistr.h: No such file or directory (#2020)

by stefan.wen

6 months

[kamailio/kamailio] List selectors (#2705)

by sergey-safarov

#### Pre-Submission Checklist - [x] Commit message has the format required by CONTRIBUTING guide - [x] Commits are split per component (core, individual modules, libs, utils, ...) - [ ] Each component has a single commit (if not, squash them into one commit) - [ ] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [x] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [x] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description This is the selectors feature for `lost` module. The module still in development but the core functionality is working. What need to do 1. separate feature into dedicated `.c` file; 2. rebase on current `lost` implementation; 3. add documentation; 4. add a unit test. Would be fine if we can merge this into 5.5. This branch based on e7d68556e3560f488c4f421731f78b3f9abe549e commit You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/2705 -- Commit Summary -- * http_client: http_client_request (api) content-type header support * lost: new features, attributes and a new function to dereference location * lost: bug-fix due to a code formatting error * lost: DOM level count fix * http_client: duplicated code removed * lost: README update * lost: memory leak fix and code refactoring * lost: implemented sectors -- File Changes -- M src/modules/http_client/curl_api.c (1) M src/modules/http_client/curl_api.h (3) M src/modules/http_client/functions.c (30) M src/modules/http_client/functions.h (14) M src/modules/lost/doc/lost.xml (2) M src/modules/lost/doc/lost_admin.xml (172) M src/modules/lost/functions.c (921) M src/modules/lost/functions.h (3) M src/modules/lost/lost.c (754) A src/modules/lost/naptr.c (255) A src/modules/lost/naptr.h (38) M src/modules/lost/pidf.c (5) A src/modules/lost/response.c (991) A src/modules/lost/response.h (131) M src/modules/lost/utilities.c (532) M src/modules/lost/utilities.h (65) -- Patch Links -- https://github.com/kamailio/kamailio/pull/2705.patch https://github.com/kamailio/kamailio/pull/2705.diff -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/2705

6 months, 1 week

[kamailio/kamailio] lib: big integers should not be treated as negative ones (#2106)

by Ivan Murashko

0xffffffff00000000ULL mask does not take into consideration signed 32 bit integers and as result 2147483648 will be stored as -2147483648. Another mask should be used to correct the issue: 0xffffffff80000000ULL. It processes correctly the case of integers that are greater than 2147483647. There are several gdb tests below: (gdb) p ((unsigned long long)2147483648 & 0xffffffff80000000ULL) $1= 2147483648 (gdb) p ((unsigned long long)2147483647 & 0xffffffff80000000ULL) $2 = 0 (gdb) p ((unsigned long long)2147483646 & 0xffffffff80000000ULL) $3 = 0 (gdb) p ((unsigned long long)4147483646 & 0xffffffff80000000ULL) $4 = 2147483648   #### Pre-Submission Checklist    - [ ] Commit message has the format required by CONTRIBUTING guide - [ ] Commits are split per component (core, individual modules, libs, utils, ...) - [ ] Each component has a single commit (if not, squash them into one commit) - [ ] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [ ] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/2106 -- Commit Summary -- * lib: big integers should not be treated as negative ones -- File Changes -- M src/lib/srdb1/db_ut.c (2) -- Patch Links -- https://github.com/kamailio/kamailio/pull/2106.patch https://github.com/kamailio/kamailio/pull/2106.diff -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/2106

7 months, 1 week

[kamailio/kamailio] sslv3 errors showing up with 'tls_method' set as 'TLSv1.2+' (Issue #3085)

by Vinicius K. Ruoso

### Description Some users are having issues connecting to kamailio websocket using TLS. The logs show SSLv3 errors. Cannot find why that error would show up if SSLv2/3 is not enabled. Double checked it via SSLLabs that only TLSv1.2 is allowed in the service. Any pointers would be appreciated. Also, let me know if more debug information is needed. ### Troubleshooting #### Debugging Data This is the TLS config: ``` modparam("tls", "tls_method", "TLSv1.2+") modparam("tls", "verify_certificate", 0) modparam("tls", "require_certificate", 0) modparam("tls", "low_mem_threshold1", 0) modparam("tls", "low_mem_threshold2", 0) modparam("tls", "private_key", "/etc/certs/tls.key") modparam("tls", "certificate", "/etc/certs/tls.crt") ``` This is the output from tls module in kamcmd: ``` kamcmd> tls.info { max_connections: 2048 opened_connections: 353 clear_text_write_queued_bytes: 0 } kamcmd> tls.options { force_run: 0 method: TLSv1.2+ verify_certificate: 0 verify_depth: 9 require_certificate: 0 private_key: /etc/certs/tls.key ca_list: <null string> certificate: /etc/certs/tls.crt cipher_list: <null string> session_cache: 0 session_id: kamailio-tls-5.x.y config: <null string> log: 3 debug: 3 connection_timeout: 600 disable_compression: 1 ssl_release_buffers: -1 ssl_freelist_max: -1 ssl_max_send_fragment: -1 ssl_read_ahead: 0 send_close_notify: 0 low_mem_threshold1: 0 low_mem_threshold2: 0 ct_wq_max: 10485760 con_ct_wq_max: 65536 ct_wq_blk_size: 4096 } ``` #### Log Messages I see this log messages related to SSLv3: ``` 15(36) ERROR: tls [tls_util.h:42]: tls_err_ret(): TLS accept:error:14094416:SSL routines:ssl3_read_bytes:sslv3 alert certificate unknown 15(36) ERROR: <core> [core/tcp_read.c:1512]: tcp_read_req(): ERROR: tcp_read_req: error reading - c: 0x7fafc8768190 r: 0x7fafc8768278 (-1) ``` ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.3.9 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 6.3.0 ``` * **Operating System**: Debian 9.13. ``` Linux 4.19.112+ #1 SMP Wed Sep 23 07:53:39 PDT 2020 x86_64 GNU/Linux ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3085 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3085(a)github.com>

7 months, 1 week

[kamailio/kamailio] tls.reload during tls relaying cause tls memory double free (Issue #3319)

by JiangHai2011

### Description during tls relaying, do tls.reload repeatedly, tcp receiver task will crash ### Troubleshooting #### Reproduction (1)write a simple request_route logic in kamailio.cfg, as follows: request_route { add_local_rport(); $du = "sip:192.168.131.190:1001;transport=tls"; forward(); } (2)start sipp caller to kamailio tls:0.0.0.0:5061 and kamailio will relay this request to callee (3)at the same time, in another console, run the following cmds: while true; do /opt/kamailio/sbin/kamcmd tls.reload && sleep 0.1&& echo `date`; done; #### Debugging Data ``` (gdb) bt full #0 0x00007f69569e81f7 in raise () from /lib64/libc.so.6 No symbol table info available. #1 0x00007f69569e98e8 in abort () from /lib64/libc.so.6 No symbol table info available. #2 0x00000000006d59cf in tlsf_free (tlsf=0x7f6920869000, ptr=0x7f6927ca74b8, file=0x7f694ccb73e4 "tls: tls_init.c", function=0x7f694ccb8b7e <__FUNCTION__.23358> "ser_free", line=323, mname=0x7f694ccb73e0 "tls") at core/mem/tlsf_malloc.c:1031 control = 0x7f6920869000 block = 0x7f6927ca7488 __FUNCTION__ = "tlsf_free" #3 0x00000000006da1ee in tlsf_shm_free (tlsfmp=0x7f6920869000, p=0x7f6927ca74b8, file=0x7f694ccb73e4 "tls: tls_init.c", func=0x7f694ccb8b7e <__FUNCTION__.23358> "ser_free", line=323, mname=0x7f694ccb73e0 "tls") at core/mem/tlsf_malloc.c:1544 No locals. #4 0x00007f694cc68cea in ser_free (ptr=0x7f6927ca74b8, fname=0x7f694c6fba75 "crypto/err/err.c", fline=450) at tls_init.c:323 __FUNCTION__ = "ser_free" #5 0x00007f694c617de3 in CRYPTO_free (str=0x7f6927ca74b8, file=0x7f694c6fba75 "crypto/err/err.c", line=450) at crypto/mem.c:299 No locals. #6 0x00007f694c5e656a in ERR_clear_error () at crypto/err/err.c:450 i = 1 es = 0x7f69208d17e8 #7 0x00007f694c9f8fbc in state_machine (s=0x7f6927ca4e58, server=1) at ssl/statem/statem.c:311 buf = 0x0 cb = 0x0 st = 0x7f6927ca4ea0 ret = -1 ssret = 57 #8 0x00007f694c9f8f17 in ossl_statem_accept (s=0x7f6927ca4e58) at ssl/statem/statem.c:255 No locals. ---Type <return> to continue, or q <return> to quit--- #9 0x00007f694c9dfd81 in SSL_do_handshake (s=0x7f6927ca4e58) at ssl/ssl_lib.c:3661 ret = 1 #10 0x00007f694c9dbfb9 in SSL_accept (s=0x7f6927ca4e58) at ssl/ssl_lib.c:1652 No locals. #11 0x00007f694cc9048e in tls_accept (c=0x7f6927c9f2a8, error=0x7ffe3a31e894) at tls_server.c:468 ret = 1 ssl = 0x7f6927ca4e58 cert = 0x0 tls_c = 0x7f6927c9ed50 tls_log = 32617 __FUNCTION__ = "tls_accept" pkey = 0x0 #12 0x00007f694cc9ab97 in tls_h_read_f (c=0x7f6927c9f2a8, flags=0x7ffe3a31ece0) at tls_server.c:1173 r = 0x7f6927c9f3d0 bytes_free = 16383 bytes_read = 194 read_size = 16383 ssl_error = 0 ssl_read = 0 ssl = 0x7f6927ca4e58 rd_buf = "\026\003\001\000\275\001\000\000\271\003\003\357$\303\342a\362C\v\220\n\031Fs=E\267m\215\260\031\341\376\027A\213Ѱ)\\\251\036\336\000\000\070\300,\300\060\000\237̨̩̪\300+\300/\000\236\300$\300(\000k\300#\300'\000g\300\n\300\024\000\071\300\t\300\023\000\063\000\235\000\234\000=\000<\000\065\000/\000\377\001\000\000X\000\v\000\004\003\000\001\002\000\n\000\f\000\n\000\035\000\027\000\036\000\031\000\030\000#\000\000\000\026\000\000\000\027\000\000\000\r\000\060\000.\004\003\005\003\006\003\b\a\b\b\b\t\b\n\b\v\b\004\b\005\b\006\004\001\005\001\006\001\003\003\002\003\003\001\002\001\003\002\002\002\004\002\005\002\006\002\232\203\002?\267,\241/\\\331"... wr_buf = "\026\003\003\000\272\004\000\000\266\000\000\034 \000\260\201\227\230o\346/%W\246\306o&\210j\017@\036\352\064\240\---Type <return> to continue, or q <return> to quit--- 346\351(q\233\374\321\332D1|\rI\235\b`\022v^Xk\265\f\270a\243\260\373\311\t<o\v\324\245\205@\344\vz\016\005Vbud\254f\n\326!\306\nm>r]\271e\351\345w\214\200\037\t\265\307\064)\033.\273{1\351\326W,\262\264\267\241\237M\254\276\372\026\227j8\344#Aw\r\025ULM\021\245\222:\004a\006zm?\374\243\224\275\300\310AG\347\305\376\257\303\035I\215\064\035\215\021\300\210o\036A\373\037\231l\242_\324\017\312^\024\r\312\340yq\375?\317 \024\003\003\000\001\001\026\003\003\000"... rd = {buf = 0x7ffe3a30e890 "\026\003\001", pos = 0, used = 194, size = 65536} wr = {buf = 0x7ffe3a2fe890 "\026\003\003", pos = 0, used = 0, size = 65536} tls_c = 0x7f6927c9ed50 enc_rd_buf = 0x0 n = 0 flush_flags = 1 err_src = 0x7f694ccc1878 "TLS read:" ip_buf = "192.168.131.190", '\000' <repeats 48 times> x = 0 tls_dbg = 0 __FUNCTION__ = "tls_h_read_f" #13 0x00000000006b6509 in tcp_read_headers (c=0x7f6927c9f2a8, read_flags=0x7ffe3a31ece0) at core/tcp_read.c:441 bytes = 65535 remaining = 0 p = 0x7f6925192572 ": 100587 <sip:100587@Sipproxy.gs:5062>;tag=588\r\nTo: 100 <sip:100@sipproxy.gs:5061;transport=TLS>;tag=21794\r\nCall-ID: 588-49839(a)192.168.131.190\r\nCSeq: 1 INVITE\r\nServer: Grandstream UCM6301V1.2C 1.0.13."... r = 0x7f6927c9f3d0 mc = 622404320 body_len = 0 mfline = 0x0 mtransid = {s = 0x7f6925191f40 "\030\002", len = 622403416} __FUNCTION__ = "tcp_read_headers" #14 0x00000000006bdd81 in tcp_read_req (con=0x7f6927c9f2a8, bytes_read=0x7ffe3a31ece4, read_flags=0x7ffe3a31ece0) ---Type <return> to continue, or q <return> to quit--- at core/tcp_read.c:1469 bytes = -1 total_bytes = 0 resp = 1 size = 140729874770784 req = 0x7f6927c9f3d0 dst = {send_sock = 0x400000010, to = {s = {sa_family = 0, sa_data = "\300+\002\000\000\000\001\000\061:\006\000\000"}, sin = {sin_family = 0, sin_port = 11200, sin_addr = {s_addr = 2}, sin_zero = "\001\000\061:\006\000\000"}, sin6 = { sin6_family = 0, sin6_port = 11200, sin6_flowinfo = 2, sin6_addr = {__in6_u = { __u6_addr8 = "\001\000\061:\006\000\000\000\000F\265\000\000\000\000", __u6_addr16 = {1, 14897, 6, 0, 17920, 181, 0, 0}, __u6_addr32 = {976289793, 6, 11879936, 0}}}, sin6_scope_id = 8233784}, sas = {ss_family = 0, __ss_padding = "\300+\002\000\000\000\001\000\061:\006\000\000\000\000F\265\000\000\000\000\000\070\243}\000\004\274{ \020\000\000\000\020\000\000\000 \354\061:\371\273{ \002\000\000\000\000\000\000\000\024\000\000\000\000\000\000\000\001\000\000\000\001\000\000\000\a\000\000\000\000\000\000\000\000\000\300+\000\000\000\000\330\354\061:\376\177\000\000\b", '\000' <repeats 22 times>, __ss_align = 140729874770800}}, id = 1, send_flags = {f = 0, blst_imask = 0}, proto = 80 'P', proto_pad0 = -21 '\353', proto_pad1 = 14897} c = 58 ':' ret = 0 __FUNCTION__ = "tcp_read_req" #15 0x00000000006c29e7 in handle_io (fm=0x7f6952f58a58, events=1, idx=-1) at core/tcp_read.c:1780 ret = 8 n = 8 read_flags = RD_CONN_SHORT_READ con = 0x7f6927c9f2a8 s = 7 resp = 1 t = 0 ---Type <return> to continue, or q <return> to quit--- ee = 0x0 __FUNCTION__ = "handle_io" #16 0x00000000006b1729 in io_wait_loop_epoll (h=0xb54600 <io_w>, t=2, repeat=0) at core/io_wait.h:1070 n = 1 r = 0 fm = 0x7f6952f58a58 revents = 1 __FUNCTION__ = "io_wait_loop_epoll" #17 0x00000000006c5519 in tcp_receive_loop (unix_sock=16) at core/tcp_read.c:1976 __FUNCTION__ = "tcp_receive_loop" #18 0x0000000000535888 in tcp_init_children (woneinit=0x7ffe3a31f09c) at core/tcp_main.c:5227 r = 1 i = 5 reader_fd_1 = 16 pid = 0 si_desc = "tcp receiver (generic)\000\000\000\000\000\000\000\000\000\000@\304A\000\000\000\000\000SI\203\000\000\000\000\000\070\243}\000\000\000\000\000\000\000\300+\000\000\000\000\060\360\061:\376\177\000\000\347SW\000\000\000\000\000\060\360\061:\376\177\000\000\n\363e\000\000\000\000\000\340\357\061:\376\177\000\000)\310w\000\000\000\000\000\t\000\000\000\n\000\000\000\000\263\206 i\177\000" si = 0x0 __FUNCTION__ = "tcp_init_children" #19 0x000000000042d562 in main_loop () at main.c:1849 i = 0 pid = 37536 si = 0x0 si_desc = "\v\000\000\000z\000\000\000\004\000\000\000j\001\000\000\000\000\000\000\376\177\000\000\200p\000\000\000\000\000\000p\025\252\002\000\000\000\000 \261\206 i\177\000\000\240\243^Ni\177\000\000\000\000\000\000\000\000\000\000`\366\061:\376\177\00---Type <return> to continue, or q <return> to quit--- 0\000\230Y^Ni\177\000\000SI\203\000\000\000\000\000\070\243}\000\000\000\000\000\250\225^Ni\177\000\000\217U\252Vi\177\000\000\000\362\061:\376\177\000\000\060\000\000\000\060\000\000" nrprocs = 5143176 woneinit = 1 __FUNCTION__ = "main_loop" #20 0x0000000000436b1e in main (argc=7, argv=0x7ffe3a31f748) at main.c:3078 cfg_stream = 0x2a130a0 c = -1 r = 0 tmp = 0x7ffe3a32157d "" tmp_len = 0 port = 0 proto = 0 ahost = 0x0 aport = 0 options = 0x7dd4e0 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:x:X:Y:" ret = -1 seed = 2220745850 rfd = 4 debug_save = 0 debug_flag = 0 dont_fork_cnt = 0 n_lst = 0x7ffe3a31f600 p = 0x0 st = {st_dev = 18, st_ino = 104172, st_nlink = 2, st_mode = 16832, st_uid = 0, st_gid = 0, __pad0 = 0, st_rdev = 0, st_size = 40, st_blksize = 4096, st_blocks = 0, st_atim = {tv_sec = 1672026025, tv_nsec = 194902649}, st_mtim = { tv_sec = 1672281302, tv_nsec = 856611068}, st_ctim = {tv_sec = 1672281302, tv_nsec = 856611068}, __unused = {0, 0, 0}} ---Type <return> to continue, or q <return> to quit--- tbuf = "\216\377w\001", '\000' <repeats 12 times>, "\250\061\234Vi\177\000\000\000\360\212Wi\177", '\000' <repeats 90 times>, "\200\"\254\000\000\000\000\000\300\310A\000\000\000\000\000@\367\061:\376\177", '\000' <repeats 26 times>, "\336\310jWi\177\000\000\001", '\000' <repeats 23 times>... option_index = 0 long_options = {{name = 0x7df90f "help", has_arg = 0, flag = 0x0, val = 104}, {name = 0x7da7b4 "version", has_arg = 0, flag = 0x0, val = 118}, {name = 0x7df914 "alias", has_arg = 1, flag = 0x0, val = 1024}, {name = 0x7df91a "subst", has_arg = 1, flag = 0x0, val = 1025}, {name = 0x7df920 "substdef", has_arg = 1, flag = 0x0, val = 1026}, { name = 0x7df929 "substdefs", has_arg = 1, flag = 0x0, val = 1027}, {name = 0x7df933 "server-id", has_arg = 1, flag = 0x0, val = 1028}, {name = 0x7df93d "loadmodule", has_arg = 1, flag = 0x0, val = 1029}, { name = 0x7df948 "modparam", has_arg = 1, flag = 0x0, val = 1030}, {name = 0x7df951 "log-engine", has_arg = 1, flag = 0x0, val = 1031}, {name = 0x7df95c "debug", has_arg = 1, flag = 0x0, val = 1032}, {name = 0x7df962 "cfg-print", has_arg = 0, flag = 0x0, val = 1033}, {name = 0x7df96c "atexit", has_arg = 1, flag = 0x0, val = 1034}, {name = 0x0, has_arg = 0, flag = 0x0, val = 0}} __FUNCTION__ = "main" (gdb) (gdb) info locals cfg_stream = 0x2a130a0 c = -1 r = 0 tmp = 0x7ffe3a32157d "" tmp_len = 0 port = 0 proto = 0 ahost = 0x0 aport = 0 options = 0x7dd4e0 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:x:X:Y:" ret = -1 seed = 2220745850 rfd = 4 debug_save = 0 debug_flag = 0 dont_fork_cnt = 0 n_lst = 0x7ffe3a31f600 p = 0x0 st = {st_dev = 18, st_ino = 104172, st_nlink = 2, st_mode = 16832, st_uid = 0, st_gid = 0, __pad0 = 0, st_rdev = 0, st_size = 40, st_blksize = 4096, st_blocks = 0, st_atim = {tv_sec = 1672026025, tv_nsec = 194902649}, st_mtim = {tv_sec = 1672281302, tv_nsec = 856611068}, st_ctim = {tv_sec = 1672281302, tv_nsec = 856611068}, __unused = {0, 0, 0}} tbuf = "\216\377w\001", '\000' <repeats 12 times>, "\250\061\234Vi\177\000\000\000\360\212Wi\177", '\000' <repeats 90 times>, "\200\"\254\000\000\000\000\000\300\310A\000\000\000\000\000@\367\061:\376\177", '\000' <repeats 26 times>, "\336\310jWi\177\000\000\001", '\000' <repeats 23 times>... option_index = 0 long_options = {{name = 0x7df90f "help", has_arg = 0, flag = 0x0, val = 104}, {name = 0x7da7b4 "version", has_arg = 0, flag = 0x0, val = 118}, {name = 0x7df914 "alias", has_arg = 1, flag = 0x0, val = 1024}, {name = 0x7df91a "subst", has_arg = 1, flag = 0x0, ---Type <return> to continue, or q <return> to quit--- val = 1025}, {name = 0x7df920 "substdef", has_arg = 1, flag = 0x0, val = 1026}, {name = 0x7df929 "substdefs", has_arg = 1, flag = 0x0, val = 1027}, {name = 0x7df933 "server-id", has_arg = 1, flag = 0x0, val = 1028}, {name = 0x7df93d "loadmodule", has_arg = 1, flag = 0x0, val = 1029}, {name = 0x7df948 "modparam", has_arg = 1, flag = 0x0, val = 1030}, { name = 0x7df951 "log-engine", has_arg = 1, flag = 0x0, val = 1031}, {name = 0x7df95c "debug", has_arg = 1, flag = 0x0, val = 1032}, {name = 0x7df962 "cfg-print", has_arg = 0, flag = 0x0, val = 1033}, {name = 0x7df96c "atexit", has_arg = 1, flag = 0x0, val = 1034}, {name = 0x0, has_arg = 0, flag = 0x0, val = 0}} __FUNCTION__ = "main" (gdb) list 1978 int main(int argc, char** argv) 1979 { 1980 1981 FILE* cfg_stream; 1982 int c,r; 1983 char *tmp; 1984 int tmp_len; 1985 int port; 1986 int proto; 1987 char *ahost = NULL; ``` #### Log Messages #### SIP Traffic ### Possible Solutions ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.6.2 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled on 10:33:27 Dec 29 2022 with gcc 4.9.4 ``` * **Operating System**:  ``` Linux localhost.localdomain 3.10.0-327.el7.x86_64 #1 SMP Thu Nov 19 22:10:57 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3319 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3319(a)github.com>

7 months, 3 weeks

[kamailio/kamailio] kamailio crash alert (Issue #3290)

by 6ecbl

### Description crashes the server, raised by qm_debug_check_frag()[?] ### Troubleshooting #### Reproduction happens randomly #### Debugging Data ``` [New LWP 13364] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `/var/lib/ums/sbin/kamailio -m 2048 -M 12 -P /var/run/kamailio/kamailio.pid -f /'. Program terminated with signal SIGSEGV, Segmentation fault. #0 __strlen_avx2 () at ../sysdeps/x86_64/multiarch/strlen-avx2.S:65 65 ../sysdeps/x86_64/multiarch/strlen-avx2.S: No such file or directory. (gdb) bt full #0 __strlen_avx2 () at ../sysdeps/x86_64/multiarch/strlen-avx2.S:65 No locals. #1 0x00007fbaf0bf99ef in _IO_vfprintf_internal (s=s@entry=0x1874040, format=format@entry=0xa6217c "%s: %.*s%s%s%sBUG: qm: fragm. %p (address %p) beginning overwritten (%lx)! Memory allocator was called from %s:%u. Fragment marked by %s:%lu. Exec from %s:%u.\n", ap=ap@entry=0x7ffc043b3b60) at vfprintf.c:1638 len = <optimized out> string_malloced = 0 step0_jumps = {0, 3637, 3213, 3109, 4653, 2997, 4437, 4037, 3717, 4869, 4773, 3397, 4557, 4549, 3589, 4981, 3701, 4757, 3317, 2021, 1429, 1221, 2261, 1701, 1653, 797, 1773, 437, 437, 4333} space = 0 is_short = 0 use_outdigits = 0 outc = <optimized out> step1_jumps = {0, 0, 0, 0, 0, 0, 0, 0, 0, 4869, 4773, 3397, 4557, 4549, 3589, 4981, 3701, 4757, 3317, 2021, 1429, 1221, 2261, 1701, 1653, 797, 1773, 437, 437, 0} group = 0 prec = <optimized out> step2_jumps = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 4773, 3397, 4557, 4549, 3589, 4981, 3701, 4757, 3317, 2021, 1429, 1221, 2261, 1701, 1653, 797, 1773, 437, 437, 0} string = 0x8 <error: Cannot access memory at address 0x8> left = 0 is_long_double = <optimized out> width = 0 signed_number = <optimized out> step3a_jumps = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3493, 0, 0, 0, 3589, 4981, 3701, 4757, 3317, 0, 0, 0, 0, 1701, 0, 0, 0, 0, 0, 0} alt = 0 showsign = 0 is_long = <optimized out> is_char = <optimized out> pad = 32 ' ' step3b_jumps = {0 <repeats 11 times>, 4557, 0, 0, 3589, 4981, 3701, 4757, 3317, 2021, 1429, 1221, 2261, 1701, 1653, 797, 1773, 0, 0, 0} step4_jumps = {0 <repeats 14 times>, 3589, 4981, 3701, 4757, 3317, 2021, 1429, 1221, 2261, 1701, 1653, 797, 1773, 0, 0, 0} args_value = <optimized out> is_negative = <optimized out> number = <optimized out> base = <optimized out> the_arg = {pa_wchar = 10882210 L'\xa60ca2', pa_int = 10882210, pa_long_int = 10882210, pa_long_long_int = 10882210, pa_u_int = 10882210, pa_u_long_int = 10882210, pa_u_long_long_int = 10882210, pa_double = 5.3765261118300716e-317, pa_long_double = <invalid float value>, pa_string = 0xa60ca2 "fragm. from qm_malloc", pa_wstring = 0xa60ca2 L"\x67617266\x66202e6d\x206d6f72\x6d5f6d71\x6f6c6c61\x633c0063\x3e65726f\x6f635b20\x6d2f6572\x712f6d65\x6c616d5f\x2e636f6c\x31343a63\x203a5d39\x64322500\x29642528\x3a732520\x2a2e2520\x25732573\x71732573\x616d5f6d\x636f6c6c\x2c702528\x756c2520\x65722029\x6e727574\x64612073\x73657264\x70252073\x61726620\x25202e67\x73282070\x3d657a69\x29756c25\x206e6f20\x2d206425\x68206874\xa7469\x726f633c\x5b203e65\x65726f63\x6d656d2f\x6d5f712f\x6f6c6c61\x3a632e63\x5d323334\x2500203a\x25286432\x25202964\x25203a73\x25732a2e\x25732573\x5f6d7173\x6c6c616d\x2528636f\x25202c70\x2029756c\x6c6c6163\x66206465\x206d6f72\x203a7325\x25287325\x202c2964\x75646f6d\x203a656c\x203b7325\x65657246\x61726620\x6e656d67\x6f6e2074\x6f662074\x21646e75\x6d71000a\x6572665f\x633c0065\x3e65726f\x6f635b20\x6d2f6572\x712f6d65\x6c616d5f\x2e636f6c\x38343a63\x203a5d32\x64322500\x29642528\x3a732520\x2a2e2520\x25732573\x71732573\x72665f6d\x25286565\x25202c70\x202c2970\x6c6c6163\x66206465\x206d6f72\x203a7325\x25287325\xa2964\x726f633c\x5b203e65\x65726f63\x6d656d2f\x6d5f712f\x6f6c6c61\x3a632e63\x5d373834\x2500203a\x25286432\x25202964\x25203a73\x25732a2e\x25732573\x52415773\x474e494e\x7266203a\x30286565\x61632029\x64656c6c\x6f726620\x7325206d\x7325203a\x29642528\x633c000a\x3e65726f\x6f635b20\x6d2f6572\x712f6d65\x6c616d5f\x2e636f6c\x39343a63\x203a5d38\x64322500\x29642528\x3a732520\x2a2e2520\x25732573\x42732573\x203a4755\x20646162\x6e696f70\x20726574\x28207025\x2074756f\x6d20666f\x726f6d65\x6c622079\x216b636f\x61632029\x64656c6c\x6f726620\x7325206d\x7325203a\x29642528\x61202d20\x74726f62\xa676e69\x6f633c00\x203e6572\x726f635b\x656d2f65\x5f712f6d\x6c6c616d\x632e636f\x3230353a\x203a5d\x28643225\x20296425\x203a7325\x732a2e25\x73257325\x55427325\x62203a47\x70206461\x746e696f\x25207265\x6f282070\x6f207475\x656d2066\x79726f6d\x6f6c6220\x29216b63\x6c616320\x2064656c\x6d6f7266\x3a732520\x28732520\x20296425\x6769202d\x69726f6e\xa676e\x726f633c\x5b203e65\x65726f63\x6d656d2f\x6d5f712f\x6f6c6c61\x3a632e63\x5d363135\x2500203a"..., pa_pointer = 0xa60ca2, pa_user = 0xa60ca2} spec = 115 's' _buffer = {__routine = 0xe043b3a30, __arg = 0xaab0000000000000, __canceltype = 70989632, __prev = 0x87aa86 <qm_find_free+70>} _avail = <optimized out> thousands_sep = 0x0 grouping = 0xffffffffffffffff <error: Cannot access memory at address 0xffffffffffffffff> done = 223 f = 0xa62203 "s:%lu. Exec from %s:%u.\n" lead_str_end = 0xa6217c "%s: %.*s%s%s%sBUG: qm: fragm. %p (address %p) beginning overwritten (%lx)! Memory allocator was called from %s:%u. Fragment marked by %s:%lu. Exec from %s:%u.\n" end_of_spec = <optimized out> work_buffer = '\000' <repeats 88 times>, "\035\270\314\357\272\177", '\000' <repeats 22 times>, "\020\000\000\000\000\000\000\000\000\000|\266\340\066;\004\374\177\000\000\221\222\207\000\000\000\000\000\003\b\000\000\000\000\000\000\001\b\000\000\003\b\000\000\220\301\264o\272\177\000\000\220\301\264o\272\177\000\000\360-+y\272\177\000\000\000@\261o\272\177\000\000@7;\004\374\177\000\000"... workstart = 0x0 workend = <optimized out> ap_save = {{gp_offset = 16, fp_offset = 48, overflow_arg_area = 0x7ffc043b3c40, reg_save_area = 0x7ffc043b3b80}} nspecs_done = 10 save_errno = 0 readonly_format = 0 __PRETTY_FUNCTION__ = "_IO_vfprintf_internal" __result = <optimized out> #2 0x00007fbaf0c9bc68 in __GI___vsyslog_chk (pri=<optimized out>, flag=-1, fmt=<optimized out>, ap=0x7ffc043b3b60) at ../misc/syslog.c:220 now_tm = {tm_sec = 47, tm_min = 6, tm_hour = 6, tm_mday = 1, tm_mon = 11, tm_year = 122, tm_wday = 4, tm_yday = 334, tm_isdst = 0, tm_gmtoff = -28800, tm_zone = 0x175a950 "PST"} now = 1669903607 fd = <optimized out> f = 0x1874040 buf = 0x0 bufsize = 0 msgoff = 21 saved_errno = 0 failbuf = "\000\000\000\000\001", '\000' <repeats 23 times> clarg = <optimized out> #3 0x00007fbaf0c9bd4c in __syslog (pri=<optimized out>, fmt=<optimized out>) at ../misc/syslog.c:117 ap = {{gp_offset = 48, fp_offset = 48, overflow_arg_area = 0x7ffc043b3c80, reg_save_area = 0x7ffc043b3b80}} #4 0x000000000087b7e1 in qm_debug_check_frag (qm=0x7fba6fb14000, f=0x7fba792aa810, file=0x7fbaeff5065c "tls: tls_init.c", line=293, efile=0xa61ea3 "core/mem/q_malloc.c", eline=391) at core/mem/q_malloc.c:123 __llevel = -3 p = 0x7ffc043b41a0 #5 0x0000000000879b37 in qm_malloc (qmp=0x7fba6fb14000, size=120, file=0x7fbaeff5065c "tls: tls_init.c", func=0x7fbaeff5066c "ser_malloc", line=293, mname=0x7fbaeff4e021 "tls") at core/mem/q_malloc.c:391 qm = 0x7fba6fb14000 f = 0x7fba792aa810 hash = 710 list_cntr = 1 #6 0x000000000088fd7a in qm_shm_malloc (qmp=0x7fba6fb14000, size=120, file=0x7fbaeff5065c "tls: tls_init.c", func=0x7fbaeff5066c "ser_malloc", line=293, mname=0x7fbaeff4e021 "tls") at core/mem/q_malloc.c:1227 r = 0x7fba792b6fd8 #7 0x00007fbaefee3b8e in ser_malloc (size=120, fname=0x7fbaefd6dab1 "crypto/bio/bio_lib.c", fline=73) at tls_init.c:293 No locals. #8 0x00007fbaefcc8e51 in CRYPTO_zalloc () from /var/lib/ums/lib/libcrypto.so.1.1 No symbol table info available. #9 0x00007fbaefbc449e in BIO_new () from /var/lib/ums/lib/libcrypto.so.1.1 No symbol table info available. #10 0x00007fbaefe632a0 in ssl_init_wbio_buffer () from /var/lib/ums/lib/libssl.so.1.1 No symbol table info available. #11 0x00007fbaefe748e3 in state_machine () from /var/lib/ums/lib/libssl.so.1.1 No symbol table info available. #12 0x00007fbaefee9fc8 in tls_accept (c=0x7fba792a3a10, error=0x7ffc043d5fc8) at tls_server.c:468 ret = 16383 ssl = 0x7fba792abf78 cert = 0x7ffc043b4d80 tls_c = 0x7fba792abee0 tls_log = 0 pkey = 0x0 #13 0x00007fbaefefc11c in tls_h_read_f (c=0x7fba792a3a10, flags=0x7ffc043d844c) at tls_server.c:1172 r = 0x7fba792a3b38 bytes_free = 16383 bytes_read = 296 read_size = 16383 ssl_error = 0 ssl_read = 0 ssl = 0x7fba792abf78 rd_buf = "\026\003\001\001#\001\000\001\037\003\003\236\244\005YYR5\"\367\370\213\352p\340\250~\020\376\a\265\224\360\064ՃvF\361\066\242\274\300\000\000\202\300\060\300,\300(\300$\300\024\300\n\000\245\000\243\000\241\000\237\000k\000j\000i\000h\000\071\000\070\000\067\000\066\000\210\000\207\000\206\000\205\300\062\300.\300*\300&\300\017\300\005\000\235\000=\000\065\000\204\300/\300+\300'\300#\300\023\300\t\000\244\000\242\000\240\000\236\000g\000@\000?\000>\000\063\000\062\000\061\000\060\000E\000D\000C\000B\300\061\300-\300)\300%\300\016\300\004\000\234\000<\000/\000A\000\377\001\000\000t\000\000\000\033\000\031\000\000\026"... wr_buf = '\000' <repeats 1856 times>... rd = {buf = 0x7ffc043c5fb0 "\026\003\001\001#\001", pos = 0, used = 296, size = 65536} wr = {buf = 0x7ffc043b5fb0 "", pos = 0, used = 0, size = 65536} tls_c = 0x7fba792abee0 enc_rd_buf = 0x0 n = 0 flush_flags = 0 err_src = 0x7fbaeff51207 "TLS read:" ip_buf = '\000' <repeats 63 times> x = 0 tls_dbg = 0 #14 0x0000000000801508 in tcp_read_headers (c=0x7fba792a3a10, read_flags=0x7ffc043d844c) at core/tcp_read.c:457 bytes = 32698 remaining = 2013924776 p = 0xffff780a14b3 <error: Cannot access memory at address 0xffff780a14b3> r = 0x7fba792a3b38 mc = 32698 body_len = 29151 mfline = 0x33100000080 <error: Cannot access memory at address 0x33100000080> mtransid = {s = 0x400000002 <error: Cannot access memory at address 0x400000002>, len = -2099512625} #15 0x00000000008099bd in tcp_read_req (con=0x7fba792a3a10, bytes_read=0x7ffc043d8450, read_flags=0x7ffc043d844c) at core/tcp_read.c:1472 bytes = -1 total_bytes = 0 resp = 1 size = 140720379622384 req = 0x7fba792a3b38 dst = {send_sock = 0x7fbaf0034118, to = {s = {sa_family = 2, sa_data = "\260Y\317\372ۂ\000\000\000\000\000\000\000"}, sin = {sin_family = 2, sin_port = 22960, sin_addr = {s_addr = 2195454671}, sin_zero = "\000\000\000\000\000\000\000"}, sin6 = {sin6_family = 2, sin6_port = 22960, sin6_flowinfo = 2195454671, sin6_addr = {__in6_u = { __u6_addr8 = "\000\000\000\000\000\000\000\000H\360\264o\272\177\000", __u6_addr16 = {0, 0, 0, 0, 61512, 28596, 32698, 0}, __u6_addr32 = {0, 0, 1874128968, 32698}}}, sin6_scope_id = 160}, sas = {ss_family = 2, __ss_padding = "\260Y\317\372ۂ\000\000\000\000\000\000\000\000H\360\264o\272\177\000\000\240\000\000\000\200\a\000\000\243\276\202a\005\000\000\000\377\377\377\377\001\000\000\000\200%\000\000\200%\000\000\024\000\000\000\000\000\000\000\001\000\000\000\001\000\000\000s\000\000\000\272\177\000\000\270s=\004\374\177\000\000\310s=\004\374\177\000\000\070hPr\272\177\000\000\b\000\000\000\377\377\377\377@\204=\004\374\177\000", __ss_align = 8}}, id = -1, send_flags = {f = 0, blst_imask = 0}, proto = 0 '\000', proto_pad0 = 0 '\000', proto_pad1 = 0} c = 54 '6' ret = 0 #16 0x000000000082310b in handle_io (fm=0x7fbaf01ff0b0, events=1, idx=-1) at core/tcp_read.c:1782 ret = 8 n = 8 read_flags = RD_CONN_SHORT_READ con = 0x7fba792a3a10 s = 115 resp = 1 t = 1646043924 ee = 0x0 #17 0x000000000081fee0 in io_wait_loop_epoll (h=0xb51830 <io_w>, t=2, repeat=0) at core/io_wait.h:1070 n = 1 r = 0 fm = 0x7fbaf01ff0b0 revents = 1 #18 0x000000000081341e in tcp_receive_loop (unix_sock=44) at core/tcp_read.c:1978 No locals. #19 0x00000000005fc385 in tcp_init_children (woneinit=0x7ffc043da918) at core/tcp_main.c:5153 r = 0 i = 7 reader_fd_1 = 44 pid = 0 si_desc = "tcp receiver (generic)\000\000\a\000\000\000\000\000\000\000\320[\003\360\272\177\000\000P\027\036\360\272\177\000\000\300\216=\004\374\177\000\000\234\b\232\000\000\000\000\000\060\375\210\000\000\000\000\000\360\311=\004\374\177\000\000\000\004\000\000\001\000\000\000H\360\264o\272\177\000\000\000\217=\004\374\177\000\000,\256\232\000\000\000\000\000\350\322\037\360\000\000\000\000pR\003\360$\000\000" si = 0x0 #20 0x0000000000439e28 in main_loop () at main.c:1857 i = 8 pid = 13357 si = 0x0 si_desc = "udp receiver child=7 sock=127.0.0.1:5060\000\060\066\060", '\000' <repeats 12 times>, "\260\373A", '\000' <repeats 21 times>, "\240\251=\004\374\177\000\000m\361}\000\000\000\000\000\300x\327\357\272\177\000\000\000\000\000\000\004\000\000\000\210\033\272", '\000' <repeats 12 times> nrprocs = 8 woneinit = 1 #21 0x0000000000448d4d in main (argc=9, argv=0x7ffc043dc9f8) at main.c:3053 long_options = {{name = 0xa7fe94 "help", has_arg = 0, flag = 0x0, val = 104}, {name = 0xa2a4bd "version", has_arg = 0, flag = 0x0, val = 118}, {name = 0xa3e626 "alias", has_arg = 1, flag = 0x0, val = 1024}, {name = 0xa28a8f "subst", has_arg = 1, flag = 0x0, val = 1025}, {name = 0xa28a95 "substdef", has_arg = 1, flag = 0x0, val = 1026}, {name = 0xa28a9e "substdefs", has_arg = 1, flag = 0x0, val = 1027}, {name = 0xa28aa8 "server-id", has_arg = 1, flag = 0x0, val = 1028}, {name = 0xa28ab2 "loadmodule", has_arg = 1, flag = 0x0, val = 1029}, {name = 0xa28abd "modparam", has_arg = 1, flag = 0x0, val = 1030}, {name = 0xa28ac6 "log-engine", has_arg = 1, flag = 0x0, val = 1031}, {name = 0xa2a5cd "debug", has_arg = 1, flag = 0x0, val = 1032}, { name = 0xa28ad1 "cfg-print", has_arg = 0, flag = 0x0, val = 1033}, {name = 0xa28adb "atexit", has_arg = 1, flag = 0x0, val = 1034}, {name = 0x0, has_arg = 0, flag = 0x0, val = 0}} cfg_stream = 0x1691290 c = -1 r = 0 tmp = 0x7ffc043dd7b6 "" tmp_len = 0 port = 10641941 proto = 0 ahost = 0x0 aport = 0 options = 0xa28ae2 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:x:X:Y:" ret = -1 seed = 2591128234 rfd = 4 debug_save = 0 debug_flag = 0 dont_fork_cnt = 0 n_lst = 0x0 p = 0x0 st = {st_dev = 21, st_ino = 1379545578, st_nlink = 2, st_mode = 16877, st_uid = 990, st_gid = 990, __pad0 = 0, st_rdev = 0, st_size = 40, st_blksize = 4096, st_blocks = 0, st_atim = { tv_sec = 1669273250, tv_nsec = 445763824}, st_mtim = {tv_sec = 1669273250, tv_nsec = 445763824}, st_ctim = {tv_sec = 1669273250, tv_nsec = 445763824}, __glibc_reserved = {0, 0, 0}} tbuf = '\000' <repeats 24 times>, "\200\037\000\000\377\377\000\000kage/lib/mysql:", '\000' <repeats 153 times>... option_index = 0 ``` #### Log Messages ``` /var/lib/ums/sbin/kamailio[13339]: ALERT: <core> [main.c:789]: handle_sigs(): child process 13364 exited by a signal 11 /var/lib/ums/sbin/kamailio[13339]: ALERT: <core> [main.c:792]: handle_sigs(): core was generated /var/lib/ums/sbin/kamailio[13339]: INFO: <core> [main.c:813]: handle_sigs(): terminating due to SIGCHLD /var/lib/ums/sbin/kamailio[13371]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13370]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13367]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13365]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13366]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13360]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13369]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13350]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13353]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13356]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13340]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13355]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13348]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13354]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13351]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13349]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13347]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13344]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13342]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13343]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13346]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13345]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13341]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13357]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13363]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13359]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13362]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13361]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received /var/lib/ums/sbin/kamailio[13358]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received ``` ### Additional Information * **Kamailio Version** ``` version: kamailio 5.5.4 (x86_64/linux) 54c9df flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 54c9df compiled on 09:03:48 Nov 17 2022 with clang 9.0 ``` * **Operating System**: ``` Distributor ID: Debian Description: Debian GNU/Linux 10 (buster) Release: 10 Codename: buster ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3290 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3290(a)github.com>

7 months, 3 weeks

[kamailio/kamailio] pua_usrloc doesn't send PUBLISH requests when a AOR has been removed by usrloc keepalive timeout (Issue #3273)

by admin-toneca

Hello, module pua_usrloc doesn't send PUBLISH when AOR has been removed by nathelper or usrloc keepalive timeout. modparam("usrloc", "timer_interval", 30) modparam("usrloc", "timer_procs", 1) modparam("usrloc", "use_domain", MULTIDOMAIN) /* enable DB persistency for location entries */ #!ifdef WITH_USRLOCDB modparam("usrloc", "db_url", DBURL_USRLOC) modparam("usrloc", "db_mode", 1) #!endif modparam("usrloc", "ka_mode", 1) modparam("usrloc", "ka_from", KEEPALIVE_FROM) modparam("usrloc", "ka_timeout", 120) modparam("presence", "db_url", FSDBURL) modparam("presence", "presentity_table", "sbc_presentity") modparam("presence", "active_watchers_table", "sbc_active_watchers") modparam("presence", "watchers_table", "sbc_watchers") modparam("presence_xml", "db_url", FSDBURL) modparam("presence_xml", "force_active", 1) modparam("presence_xml", "disable_bla", 0) modparam("presence_dialoginfo", "force_dummy_dialog", 1) modparam("presence_dialoginfo", "force_single_dialog", 1) modparam("pua", "db_url", FSDBURL) modparam("pua", "db_table", "sbc_pua") modparam("pua_usrloc", "default_domain", HOSTNAME) modparam("pua_dialoginfo", "include_callid", 0) modparam("pua_dialoginfo", "include_tags", 0) modparam("pua_dialoginfo", "include_localremote", 0) ### Additional Information ``` version: kamailio 5.6.2 (x86_64/linux) 54a9c1 flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 54a9c1 compiled on 15:40:44 Nov 1 2022 with gcc 9.4.0 ``` * **Operating System**: ``` No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04.5 LTS Release: 20.04 Codename: focal ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3273 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3273(a)github.com>

7 months, 3 weeks

[kamailio/kamailio] packaging: cannot merge config files on system with ostree (Issue #3252)

by sergey-safarov

On Fedora Core when installed Kamailio and then installed additional packages then receive error ``` [root@caloes-1 ~]# journalctl -flu ostree-boot-complete.service -o cat Starting ostree-boot-complete.service - OSTree Complete Boot... error: ostree-finalize-staged.service failed on previous boot: During /etc merge: Modified config file newly defaults to directory 'kamailio', cannot merge ostree-boot-complete.service: Main process exited, code=exited, status=1/FAILURE ostree-boot-complete.service: Failed with result 'exit-code'. Failed to start ostree-boot-complete.service - OSTree Complete Boot. ostree-boot-complete.service - OSTree Complete Boot was skipped because all trigger condition checks failed. ostree-boot-complete.service - OSTree Complete Boot was skipped because all trigger condition checks failed. ostree-boot-complete.service - OSTree Complete Boot was skipped because all trigger condition checks failed. ``` Suggestion place default Kamailio config into dedicated package "kamailio-config-default". -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3252 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3252(a)github.com>

7 months, 3 weeks

[kamailio/kamailio] PUBLISH presence terminated state results in NOTIFY confirmed or early (Issue #3229)

by Duncan Palmer

### Description I established a call between two extensions using TLS, and the presence state was replicated between two Kamailio servers using presence_dmq (no database backing). This all worked correctly except when it comes to sending a PUBLISH with a state terminated in the body, the presence_dmq sent the serialized data correctly, but the Kamailio server sends the wrong state and the caller is marked as busy on all subscribed phones until Kamailio is restarted. This occurs on version 5.6.1. In order generate this data, we use a separate script which responds to Asterisk events and sends the right PUBLISH at the right time to Kamailio, eg. if it sees a Hangup event, it sends a PUBLISH with the state in the body set to 'terminated' and the Expires: header set to 0. This appears to prompt Kamailio to send a NOTIFY with a state of early or confirmed to all subscribers. ### Troubleshooting #### Reproduction Install two Kamailio servers running Kamailio 5.6.1. I am using this installation command: `sudo apt install kamailio=5.6.1+bpo9 kamailio-dbg=5.6.1+bpo9 kamailio-lua-modules=5.6.1+bpo9 kamailio-memcached-modules=5.6.1+bpo9 kamailio-mysql-modules=5.6.1+bpo9 kamailio-presence-modules=5.6.1+bpo9 kamailio-redis-modules=5.6.1+bpo9 kamailio-tls-modules=5.6.1+bpo9 kamailio-utils-modules=5.6.1+bpo9` Some configuration detail for /etc/kamailio/kamailio.cfg: listen=tls:172.22.0.155:5061 # This ensures we have a UDP socket for sending HEP datagrams (we also send the plaintext UDP PUBLISH here) listen=udp:172.22.0.155:9060 port=5061 enable_tls=yes tcp_connection_lifetime=3605 #modules (this is not an exhaustive list) loadmodule "dmq.so" loadmodule "dialog.so" loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "presence_dialoginfo.so" loadmodule "pua.so" loadmodule "pua_dialoginfo.so" loadmodule "tls.so" modparam("dmq", "server_address", "sip:172.22.0.155:9060") modparam("dmq", "notification_address", "sip:172.22.1.124:9060") modparam("dialog", "db_url", DBURL) modparam("dialog", "enable_stats", 1) modparam("dialog", "db_mode", 0) # 0 - NO_DB - the memory content is not flushed into DB modparam("dialog", "dlg_flag", 9) modparam("dialog", "enable_dmq", 1) modparam("pua", "db_url", DBURL) modparam("pua", "db_mode", 0) # high speed memory based storage modparam("pua", "outbound_proxy", "sips:172.22.0.155:5061;transport=tls") modparam("pua_dialoginfo", "include_localremote", 0) modparam("presence", "db_url", DBURL) modparam("presence", "server_address", "sips:this.host.example.org:5061;transport=tls") modparam("presence", "db_table_lock_type", 0) modparam("presence", "subs_db_mode", 0) # 0 - This disables database completely. modparam("presence", "enable_dmq", 1) modparam("presence", "publ_cache", 2) modparam("presence", "subs_remove_match", 1) modparam("presence", "timeout_rm_subs", 0) modparam("presence_dialoginfo", "force_dummy_dialog", 1) modparam("presence_dialoginfo", "force_single_dialog", 1) modparam("presence_xml", "force_active", 1) modparam("presence_xml", "force_presence_single_body", 1) #### Log Messages These log aren't directly linked but Kamailio reports a 200 OK in response to the PUBLISH, but the NOTIFY to the handset is _not_ terminated. Difficult to capture this because of TLS. ``` Aug 26 13:32:26 this.host.example.org /usr/sbin/kamailio[4187]: DEBUG: presence [presence_dmq.c:467]: pres_dmq_replicate_presentity(): sending serialized data {"action":1,"presentity":{"domain":"sip.prod.example.org","user":"XXXX469","etag":"a.1661495738.4187.2612.0","expires":3600,"recv":1661520746,"event":"dialog"},"t_new":1,"cur_etag":"","ruid":"pres-630869ce-105b-43a","body":"<?xml version=\"1.0\"?>\n<dialog-info xmlns=\"urn:ietf:params:xml:ns:dialog-info\" version=\"0\" state=\"full\" entity=\"sip:XXXX469@sip.prod.example.org\">\n<dialog id=\"c95340dd-5266-450a-8c53-a5cd75c4bb67\" call-id=\"c95340dd-5266-450a-8c53-a5cd75c4bb67\" direction=\"recipient\">\n<state>confirmed</state>\n</dialog>\n</dialog-info>\n"} Aug 26 13:33:00 this.host.example.org /usr/sbin/kamailio[4187]: DEBUG: presence [presence_dmq.c:467]: pres_dmq_replicate_presentity(): sending serialized data {"action":1,"presentity":{"domain":"sip.prod.example.org","user":"XXXX469","etag":"a.1661495738.4187.2622.0","expires":0,"recv":1661520780,"event":"dialog"},"t_new":1,"cur_etag":"","ruid":"pres-630869ce-105b-e3a","body":"<?xml version=\"1.0\"?>\n<dialog-info xmlns=\"urn:ietf:params:xml:ns:dialog-info\" version=\"0\" state=\"full\" entity=\"sip:XXXX469@sip.prod.example.org\">\n<dialog id=\"c95340dd-5266-450a-8c53-a5cd75c4bb67\" call-id=\"c95340dd-5266-450a-8c53-a5cd75c4bb67\" direction=\"recipient\">\n<state>terminated</state>\n</dialog>\n</dialog-info>\n"} ``` This is a similar example: ``` Sep 1 12:37:14 this.host.example.org /usr/sbin/kamailio[5176]: INFO: presence [notify.c:1738]: send_notify_request(): NOTIFY sip:XXXX475@sip.prod.example.org via ÿÿÿÿÿÿÿÿ on behalf of sip:XXXX472@sip.prod.example.org for event dialog : 2_2191795053(a)172.31.29.18 Sep 1 12:37:14 this.host.example.org /usr/sbin/kamailio[5176]: DEBUG: presence [presence_dmq.c:400]: pres_dmq_replicate_presentity(): replicating presentity record - old etag a.1662035772.5176.17.0, new etag , ruid pres-6310a741-1438-11 Sep 1 12:37:14 this.host.example.org /usr/sbin/kamailio[5176]: DEBUG: presence [presence_dmq.c:467]: pres_dmq_replicate_presentity(): sending serialized data {"action":1,"presentity":{"domain":"sip.prod.example.org","user":"XXXX472","etag":"a.1662035772.5176.17.0","expires":0,"recv":1662035834,"event":"dialog"},"t_new":1,"cur_etag":"","ruid":"pres-6310a741-1438-11","body":"<?xml version=\"1.0\"?>\n<dialog-info xmlns=\"urn:ietf:params:xml:ns:dialog-info\" version=\"0\" state=\"full\" entity=\"sip:XXXX472@sip.prod.example.org\">\n<dialog id=\"76024a0e-2d35-47d8-afd1-a1363acbf859\" call-id=\"76024a0e-2d35-47d8-afd1-a1363acbf859\" direction=\"recipient\">\n<state>terminated</state>\n</dialog>\n</dialog-info>\n"} Sep 1 12:37:14 this.host.example.org /usr/sbin/kamailio[5176]: DEBUG: presence [presence_dmq.c:149]: pres_dmq_send(): sending dmq broadcast... ``` #### SIP Traffic ``` PUBLISH sip:XXXX469@sip.prod.example.org SIP/2.0 Via: SIP/2.0/UDP this.host.example.org;branch=656ebca4-5e71-4082-984a-7efa54bdd2cc To: sip:XXXX469@sip.prod.example.org From: sip:XXXX469@sip.prod.example.org;tag=a06f8d92-609b-4210-a1f0-f7042b871f07 CSeq: 12 PUBLISH Call-ID: d67c8bb5-f507-4ada-8f98-d7caa6d86721(a)this.host.example.org Content-Length: 323 User-Agent: Astertisk-Event-Bridge Max-Forwards: 70 Event: dialog Expires: 0 Content-Type: application/dialog-info+xml <?xml version="1.0"?> <dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="0" state="full" entity="sip:XXXX469@sip.prod.example.org"> <dialog id="9fa5bf3c-63f3-4d3f-82c5-cdff374c4e13" call-id="9fa5bf3c-63f3-4d3f-82c5-cdff374c4e13" direction="recipient"> <state>terminated</state> </dialog> </dialog-info> ``` ### Possible Solutions Downgrading to Kamailio version 5.5.4 resolves this problem. ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` $ kamailio -v version: kamailio 5.6.1 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 6.3.0 $ dpkg -l | egrep '^ii' | grep kamailio | awk '{ print $2, $3 }' kamailio 5.6.1+bpo9 kamailio-dbg:amd64 5.6.1+bpo9 kamailio-lua-modules:amd64 5.6.1+bpo9 kamailio-memcached-modules:amd64 5.6.1+bpo9 kamailio-mysql-modules:amd64 5.6.1+bpo9 kamailio-presence-modules:amd64 5.6.1+bpo9 kamailio-redis-modules:amd64 5.6.1+bpo9 kamailio-tls-modules:amd64 5.6.1+bpo9 kamailio-utils-modules:amd64 5.6.1+bpo9 ``` * **Operating System**: ``` $ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 9.2 (stretch) Release: 9.2 Codename: stretch $ uname -a Linux this.host.example.org 4.9.0-16-amd64 #1 SMP Debian 4.9.272-2 (2021-07-19) x86_64 GNU/Linux ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3229 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3229(a)github.com>

7 months, 3 weeks

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev December 2022