sr-dev August 2023

sr-dev@lists.kamailio.org

15 participants
207 discussions

[kamailio/kamailio] Kamailio crashes after the call (Issue #2970)

by Eugeniy

### Description Hi, I am a junior with Kamailio, if I show you where I am wrong, I will. Often during a call between two sip clients (located on the same subnet with pcscf) Kamailio P-CSCF crashes with a core dump. But sometimes the call goes through normally, I can’t see why this is happening.  ### Troubleshooting #### Reproduction It is reproduced often, the error is most likely somewhere with me.  #### Debugging Data  ``` GNU gdb (Debian 10.1-1.7) 10.1.90.20210103-git Copyright (C) 2021 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i686-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: <https://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word"... Reading symbols from /usr/sbin/kamailio... (No debugging symbols found in /usr/sbin/kamailio) warning: Can't open file /dev/zero (deleted) during file-backed mapping note processing [New LWP 14196] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/i386-linux-gnu/libthread_db.so.1". Core was generated by `/usr/sbin/kamailio -P /run/kamailio/kamailio.pid -f /etc/kamailio/kamailio.cfg'. Program terminated with signal SIGSEGV, Segmentation fault. #0 0xb6f1eab9 in ?? () from /usr/lib/i386-linux-gnu/kamailio/modules/ims_ipsec_pcscf.so (gdb) bt full #0 0xb6f1eab9 in ?? () from /usr/lib/i386-linux-gnu/kamailio/modules/ims_ipsec_pcscf.so No symbol table info available. #1 0xb6f25b1e in ipsec_forward () from /usr/lib/i386-linux-gnu/kamailio/modules/ims_ipsec_pcscf.so No symbol table info available. #2 0xb6f2901a in ?? () from /usr/lib/i386-linux-gnu/kamailio/modules/ims_ipsec_pcscf.so No symbol table info available. #3 0x004bc49d in do_action () No symbol table info available. #4 0x004bae10 in run_actions () No symbol table info available. #5 0x004ca3a0 in run_top_route () No symbol table info available. #6 0xb73c1695 in reply_received () from /usr/lib/i386-linux-gnu/kamailio/modules/tm.so No symbol table info available. #7 0x0052fa14 in ?? () No symbol table info available. #8 0x005b9170 in receive_msg () No symbol table info available. #9 0x006bb830 in udp_rcv_loop () No symbol table info available. #10 0x004b74e8 in main_loop () No symbol table info available. #11 0x004ab0f1 in main () No symbol table info available. ``` #### Log Messages  ``` Dec 10 15:33:07 pcscf /usr/sbin/kamailio[14194]: ERROR: rtpengine [rtpengine.c:2957]: select_rtpp_set(): script error-invalid id_set to be selected Dec 10 15:33:07 pcscf /usr/sbin/kamailio[14194]: ERROR: rtpengine [rtpengine.c:3236]: set_rtpengine_set_from_avp(): could not locate engine set 2 Dec 10 15:35:14 pcscf /usr/sbin/kamailio[14204]: ERROR: <script>: INVITE (sip:bob@ims.mnc001.mcc001.3gppnetwork.org (192.168.56.1:55149) to sip:alice@ims.mnc001.mcc001.3gppnetwork.org, dca98f98-8bb9-c01d-ff0c-e55794e9bcaa) Dec 10 15:35:14 pcscf /usr/sbin/kamailio[14204]: ERROR: ims_ipsec_pcscf [cmd.c:806]: ipsec_forward(): Contact doesn't exist Dec 10 15:35:14 pcscf /usr/sbin/kamailio[14204]: ERROR: ims_ipsec_pcscf [cmd.c:806]: ipsec_forward(): Contact doesn't exist Dec 10 15:35:14 pcscf /usr/sbin/kamailio[14193]: ERROR: ims_ipsec_pcscf [cmd.c:816]: ipsec_forward(): No security parameters found in contact Dec 10 15:35:14 pcscf /usr/sbin/kamailio[14195]: ERROR: <script>: INVITE (sip:bob@ims.mnc001.mcc001.3gppnetwork.org (192.168.56.106:6060) to sip:alice@ims.mnc001.mcc001.3gppnetwork.org, dca98f98-8bb9-c01d-ff0c-e55794e9bcaa) Dec 10 15:35:14 pcscf /usr/sbin/kamailio[14195]: ERROR: ims_ipsec_pcscf [cmd.c:816]: ipsec_forward(): No security parameters found in contact Dec 10 15:35:14 pcscf /usr/sbin/kamailio[14195]: ERROR: ims_ipsec_pcscf [cmd.c:816]: ipsec_forward(): No security parameters found in contact Dec 10 15:35:14 pcscf /usr/sbin/kamailio[14195]: ERROR: rtpengine [rtpengine.c:2957]: select_rtpp_set(): script error-invalid id_set to be selected Dec 10 15:35:14 pcscf /usr/sbin/kamailio[14195]: ERROR: rtpengine [rtpengine.c:3236]: set_rtpengine_set_from_avp(): could not locate engine set 2 Dec 10 15:35:14 pcscf /usr/sbin/kamailio[14205]: ERROR: rtpengine [rtpengine.c:2957]: select_rtpp_set(): script error-invalid id_set to be selected Dec 10 15:35:14 pcscf /usr/sbin/kamailio[14205]: ERROR: rtpengine [rtpengine.c:3236]: set_rtpengine_set_from_avp(): could not locate engine set 2 Dec 10 15:35:14 pcscf /usr/sbin/kamailio[14210]: ERROR: ims_ipsec_pcscf [cmd.c:252]: fill_contact(): Reply No contact headers Dec 10 15:35:14 pcscf /usr/sbin/kamailio[14210]: ERROR: ims_ipsec_pcscf [cmd.c:799]: ipsec_forward(): Error filling in contact data Dec 10 15:35:14 pcscf /usr/sbin/kamailio[14201]: ERROR: rtpengine [rtpengine.c:2957]: select_rtpp_set(): script error-invalid id_set to be selected Dec 10 15:35:14 pcscf /usr/sbin/kamailio[14201]: ERROR: rtpengine [rtpengine.c:3236]: set_rtpengine_set_from_avp(): could not locate engine set 2 Dec 10 15:35:14 pcscf /usr/sbin/kamailio[14274]: CRITICAL: <core> [core/pass_fd.c:277]: receive_fd(): EOF on 22 Dec 10 15:35:14 pcscf /usr/sbin/kamailio[14191]: ALERT: <core> [main.c:782]: handle_sigs(): child process 14196 exited by a signal 11 Dec 10 15:35:14 pcscf /usr/sbin/kamailio[14191]: ALERT: <core> [main.c:785]: handle_sigs(): core was generated Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14324]: WARNING: <core> [core/daemonize.c:596]: mem_lock_pages(): failed to lock the memory pages (disable swap): Cannot allocate memory [12] Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14324]: ERROR: rtpengine [rtpengine.c:2957]: select_rtpp_set(): script error-invalid id_set to be selected Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14324]: WARNING: tm [tm.c:521]: fixup_routes(): t_on_failure("NATMANAGE"): empty/non existing route Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14324]: ERROR: <script>: event_route[htable:mod-init] { Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14324]: ERROR: ims_ipsec_pcscf [cmd.c:950]: ipsec_destroy(): Contact doesn't exist Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14400]: WARNING: ims_usrloc_pcscf [usrloc_db.c:67]: connect_db(): DB connection already open... continuing Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14406]: WARNING: ims_usrloc_pcscf [usrloc_db.c:67]: connect_db(): DB connection already open... continuing Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14403]: WARNING: ims_usrloc_pcscf [usrloc_db.c:67]: connect_db(): DB connection already open... continuing Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14405]: WARNING: ims_usrloc_pcscf [usrloc_db.c:67]: connect_db(): DB connection already open... continuing Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14401]: WARNING: ims_usrloc_pcscf [usrloc_db.c:67]: connect_db(): DB connection already open... continuing Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14404]: WARNING: ims_usrloc_pcscf [usrloc_db.c:67]: connect_db(): DB connection already open... continuing Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14402]: WARNING: ims_usrloc_pcscf [usrloc_db.c:67]: connect_db(): DB connection already open... continuing Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14399]: WARNING: ims_usrloc_pcscf [usrloc_db.c:67]: connect_db(): DB connection already open... continuing Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14396]: WARNING: ims_usrloc_pcscf [usrloc_db.c:67]: connect_db(): DB connection already open... continuing Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14334]: ERROR: <script>: PRACK (sip:bob@ims.mnc001.mcc001.3gppnetwork.org (192.168.56.1:55149) to sip:alice@ims.mnc001.mcc001.3gppnetwork.org, dca98f98-8bb9-c01d-ff0c-e55794e9bcaa) Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14334]: ERROR: ims_ipsec_pcscf [cmd.c:816]: ipsec_forward(): No security parameters found in contact Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14334]: ERROR: ims_ipsec_pcscf [cmd.c:816]: ipsec_forward(): No security parameters found in contact Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14337]: ERROR: <script>: PRACK (sip:bob@ims.mnc001.mcc001.3gppnetwork.org (192.168.56.106:6060) to sip:alice@ims.mnc001.mcc001.3gppnetwork.org, dca98f98-8bb9-c01d-ff0c-e55794e9bcaa) Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14337]: ERROR: ims_ipsec_pcscf [cmd.c:816]: ipsec_forward(): No security parameters found in contact Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14337]: ERROR: ims_ipsec_pcscf [cmd.c:816]: ipsec_forward(): No security parameters found in contact Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14329]: ERROR: <script>: PRACK (sip:bob@ims.mnc001.mcc001.3gppnetwork.org (192.168.56.1:55149) to sip:alice@ims.mnc001.mcc001.3gppnetwork.org, dca98f98-8bb9-c01d-ff0c-e55794e9bcaa) Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14329]: ERROR: ims_ipsec_pcscf [cmd.c:816]: ipsec_forward(): No security parameters found in contact Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14329]: ERROR: ims_ipsec_pcscf [cmd.c:816]: ipsec_forward(): No security parameters found in contact Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14341]: ERROR: <script>: PRACK (sip:bob@ims.mnc001.mcc001.3gppnetwork.org (192.168.56.106:6060) to sip:alice@ims.mnc001.mcc001.3gppnetwork.org, dca98f98-8bb9-c01d-ff0c-e55794e9bcaa) Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14341]: ERROR: ims_ipsec_pcscf [cmd.c:816]: ipsec_forward(): No security parameters found in contact Dec 10 15:35:15 pcscf /usr/sbin/kamailio[14341]: ERROR: ims_ipsec_pcscf [cmd.c:816]: ipsec_forward(): No security parameters found in contact Dec 10 15:35:17 pcscf /usr/sbin/kamailio[14328]: ERROR: <script>: ACK (sip:bob@ims.mnc001.mcc001.3gppnetwork.org (192.168.56.1:55149) to sip:alice@ims.mnc001.mcc001.3gppnetwork.org, dca98f98-8bb9-c01d-ff0c-e55794e9bcaa) Dec 10 15:35:17 pcscf /usr/sbin/kamailio[14328]: ERROR: ims_ipsec_pcscf [cmd.c:816]: ipsec_forward(): No security parameters found in contact Dec 10 15:35:17 pcscf /usr/sbin/kamailio[14328]: ERROR: ims_ipsec_pcscf [cmd.c:816]: ipsec_forward(): No security parameters found in contact Dec 10 15:35:17 pcscf /usr/sbin/kamailio[14326]: ERROR: <script>: ACK (sip:bob@ims.mnc001.mcc001.3gppnetwork.org (192.168.56.106:6060) to sip:alice@ims.mnc001.mcc001.3gppnetwork.org, dca98f98-8bb9-c01d-ff0c-e55794e9bcaa) Dec 10 15:35:17 pcscf /usr/sbin/kamailio[14326]: ERROR: ims_ipsec_pcscf [cmd.c:816]: ipsec_forward(): No security parameters found in contact Dec 10 15:35:17 pcscf /usr/sbin/kamailio[14326]: ERROR: ims_ipsec_pcscf [cmd.c:816]: ipsec_forward(): No security parameters found in contact Dec 10 15:35:26 pcscf /usr/sbin/kamailio[14327]: ERROR: <script>: BYE (sip:bob@ims.mnc001.mcc001.3gppnetwork.org (192.168.56.1:55149) to sip:alice@ims.mnc001.mcc001.3gppnetwork.org, dca98f98-8bb9-c01d-ff0c-e55794e9bcaa) Dec 10 15:35:26 pcscf /usr/sbin/kamailio[14327]: ERROR: ims_ipsec_pcscf [cmd.c:816]: ipsec_forward(): No security parameters found in contact Dec 10 15:35:26 pcscf /usr/sbin/kamailio[14327]: ERROR: ims_ipsec_pcscf [cmd.c:816]: ipsec_forward(): No security parameters found in contact Dec 10 15:35:26 pcscf /usr/sbin/kamailio[14325]: ERROR: <script>: BYE (sip:bob@ims.mnc001.mcc001.3gppnetwork.org (192.168.56.106:6060) to sip:alice@ims.mnc001.mcc001.3gppnetwork.org, dca98f98-8bb9-c01d-ff0c-e55794e9bcaa) Dec 10 15:35:26 pcscf /usr/sbin/kamailio[14325]: ERROR: ims_ipsec_pcscf [cmd.c:816]: ipsec_forward(): No security parameters found in contact Dec 10 15:35:26 pcscf /usr/sbin/kamailio[14325]: ERROR: ims_ipsec_pcscf [cmd.c:816]: ipsec_forward(): No security parameters found in contact Dec 10 15:35:26 pcscf /usr/sbin/kamailio[14325]: ERROR: rtpengine [rtpengine.c:2957]: select_rtpp_set(): script error-invalid id_set to be selected Dec 10 15:35:26 pcscf /usr/sbin/kamailio[14325]: ERROR: rtpengine [rtpengine.c:3236]: set_rtpengine_set_from_avp(): could not locate engine set 2 Dec 10 15:35:30 pcscf /usr/sbin/kamailio[14396]: ERROR: <script>: Preloading NAT-PING. Rows: 921 Dec 10 15:35:30 pcscf /usr/sbin/kamailio[14396]: ERROR: <script>: OPTIONS to sip:alice@192.168.56.107:57838;transport=udp via sip:192.168.56.107:57838... ``` #### SIP Traffic  ``` (paste your sip traffic here) ``` [pcscf_dump.zip](https://github.com/kamailio/kamailio/files/7692913/pcscf_du… ### Possible Solutions  ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.4.4 (i386/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 10.2.1 ``` * **Operating System**:  ``` Linux pcscf.ims.mnc001.mcc001.3gppnetwork.org 5.10.0-9-686-pae #1 SMP Debian 5.10.70-1 (2021-09-30) i686 GNU/Linux ``` [kamailio_cfg.zip](https://github.com/kamailio/kamailio/files/7692905/kamail… [kamailio_log.zip](https://github.com/kamailio/kamailio/files/7692934/kamail… -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2970

1 year

[kamailio/kamailio] ims_usrloc_pcscf module loads registration records from the db twice (#2809)

by ErhanOnur

1 year

[kamailio/kamailio] [stirshaken] RCD (Rich Call Data) support in STIR/SHAKEN module (#2780)

by sergei lavrov

1 year

[kamailio/kamailio] kamailio mariadb error lock table active_watcher (#2805)

by ReznikovAlexei

### Description I am using Kamailio with Mariadb module And i am get in Kamailio log some error messages: ``` "ERROR: db_mysql [km_dbase.c:122]: db_mysql_submit_query(): driver error on query: Table 'active_watchers' was not locked with LOCK TABLES (1100)" "ERROR: db_mysql [km_dbase.c:122]: db_mysql_submit_query(): driver error on query: Table 'active_watchers' was not locked with LOCK TABLES (1100)" "ERROR: db_mysql [km_dbase.c:122]: db_mysql_submit_query(): driver error on query: Table 'active_watchers' was not locked with LOCK TABLES (1100)" ``` After start debug log queries in Mariadb, i see queries in logfile like this: ``` 1141 Query SET autocommit=0 1141 Query LOCK TABLES presentity WRITE 1141 Query update `presentity` set `etag`='a.1620236063.17716.2514.101',`expires`=1625215189,`received_time`=1625214589,`priority`=205144189,`body`='<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n<presence xmlns:dm=\"urn:ietf:params:xml:ns:pidf:data-model\" xmlns:rpid=\"urn:ietf:params:xml:ns:pidf:rpid\" xmlns:pidfonline=\"http://www.linphone.org/xsds/pidfonline.xsd\" entity=\"sip:name_user@office-dev.com\" xmlns=\"urn:ietf:params:xml:ns:pidf\">\n <tuple id=\"bephbl\">\n <status>\n <basic>open</basic>\n <pidfonline:online/>\n </status>\n <contact priority=\"0.8\">sip:name_user@office-dev.com</contact>\n <timestamp>2021-07-01T17:20:41Z</timestamp>\n </tuple>\n</presence>\n' where `domain`='office-dev.com' AND `username`='name_user' AND `event`='presence' AND `etag`='a.1620236063.17716.2513.100' 1141 Query select `to_user`,`to_domain`,`from_user`,`from_domain`,`watcher_username`,`watcher_domain`,`event_id`,`from_tag`,`to_tag`,`callid`,`local_cseq`,`record_route`,`contact`,`expires`,`reason`,`socket_info`,`local_contact`,`version`,`flags`,`user_agent` from `active_watchers` where `presentity_uri`='sip:name_user@office-dev.com' AND `event`='presence' AND `status`=1 AND `contact`<>'' 1141 Query COMMIT 1141 Query SET autocommit=1 1141 Query UNLOCK TABLES ``` or this one ``` 1141 Query LOCK TABLES presentity WRITE 1141 Query insert into `presentity` (`domain`,`username`,`event`,`etag`,`sender`,`body`,`received_time`,`priority`,`expires` ) values ('dev.com','+121342','presence','a.1620236063.17716.2532.0','','<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n<presence xmlns:dm=\"urn:ietf:params:xml:ns:pidf:data-model\" xmlns:rpid=\"urn:ietf:params:xml:ns:pidf:rpid\" xmlns:pidfonline=\"http://www.linphone.org/xsds/pidfonline.xsd\" entity=\"sip:+121342@dev.com\" xmlns=\"urn:ietf:params:xml:ns:pidf\">\n <tuple id=\"wumhh7\">\n <status>\n <basic>open</basic>\n <pidfonline:online/>\n </status>\n <contact priority=\"0.8\">sip:+121342@dev.com</contact>\n <timestamp>2021-07-02T10:55:26Z</timestamp>\n </tuple>\n</presence>\n',1625223329,205152929,1625226929) 1141 Query select `to_user`,`to_domain`,`from_user`,`from_domain`,`watcher_username`,`watcher_domain`,`event_id`,`from_tag`,`to_tag`,`callid`,`local_cseq`,`record_route`,`contact`,`expires`,`reason`,`socket_info`,`local_contact`,`version`,`flags`,`user_agent` from `active_watchers` where `presentity_uri`='sip:+121342@dev.com' AND `event`='presence' AND `status`=1 AND `contact`<>'' 1141 Query COMMIT 1141 Query SET autocommit=1 1141 Query UNLOCK TABLES ``` This queries matches for time with reproduced errors in above kamailio log. #### Reproduction In test lab ``` MariaDB [kamailio]> LOCK TABLES presentity WRITE; Query OK, 0 rows affected (0.00 sec) MariaDB [kamailio]> select * from presentity; Empty set (0.00 sec) MariaDB [kamailio]> select * from active_watcher; ERROR 1100 (HY000): Table 'active_watcher' was not locked with LOCK TABLES MariaDB [kamailio]> ``` I get same error Also i am found in additional documentation from Mysql next: ``` A session that requires locks must acquire all the locks that it needs in a single LOCK TABLES statement. While the locks thus obtained are held, the session can access only the locked tables. ``` or from Mariadb docs ``` While a connection holds an explicit lock on a table, it cannot access a non-locked table. If you try, the following error will be produced: ERROR 1100 (HY000): Table 'tab_name' was not locked with LOCK TABLES ``` ### Additional Information * **Kamailio Version** * ``` Kamailio ver 5.4.5 or 5.6.0 ``` So, maybe need add additional lock for table active_watchers or need take out query select from space LOCK - UNLOCK for resolve this issue? -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2805

1 year

[kamailio/kamailio] uac: allowing sending register for uacreg using rpc command and function (#2766)

by Surendra Tiwari

### Description Right now there is no way that allows users to control sending register packet using rpc command based on l_uuid .  ### Expected behavior #### Actual observed behavior #### Debugging Data ``` (paste your debugging data here) ``` #### Log Messages  ``` (paste your log messages here) ``` #### SIP Traffic  ``` (paste your sip traffic here) ``` ### Possible Solutions  ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` (paste your output here) ``` * **Operating System**:  ``` (paste your output here) ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2766

1 year

[kamailio/kamailio] cscf_get_ue_via does not return UE via (#2864)

by ErhanOnur

### Description I put a dispatcher between PCSCF and UE. When I tried to register, Pcscf's save function saved dispatcher's via IP and via port instead of UE's via IP and via port. When I checked save function of ims_registrar_pcscf module , I saw that cscf_get_ue_via function is used for that. And It gives wrong via value. Instead of giving last via , it gives the first via in the via list. Here is the function: https://github.com/kamailio/kamailio/blob/master/src/lib/ims/ims_getters.c ``` /** * Looks for the UE Via in First Via header if its a request * or in the last if its a response and returns its body * @param msg - the SIP message * @returns the via of the UE */ struct via_body* cscf_get_ue_via(struct sip_msg *msg) { struct via_body *vb=0; if (msg->first_line.type==SIP_REQUEST) vb = cscf_get_first_via(msg,0); else vb = cscf_get_last_via(msg); if (!vb) return 0; if (vb->port == 0) vb->port=5060; return vb; } ``` ### Troubleshooting I corrected the code as below: ``` /** * Looks for the UE Via in Last Via header and returns its body * @param msg - the SIP message * @returns the via of the UE */ struct via_body* cscf_get_ue_via(struct sip_msg *msg) { struct via_body *vb=0; vb = cscf_get_last_via(msg); if (!vb) return 0; if (vb->port == 0) vb->port=5060; return vb; } ``` #### Reproduction Try to put a dispatcher between PCSCF and UE. save function of ims_registrar_pcscf module saves dispatcher's IP and port as UE's IP and port. #### Debugging Data ``` (paste your debugging data here) ``` #### Log Messages ``` (paste your log messages here) ``` #### SIP Traffic  ``` (paste your sip traffic here) ``` ### Possible Solutions  ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` (paste your output here) ``` * **Operating System**:  ``` (paste your output here) ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2864

1 year

[kamailio/kamailio] Presence not working with Postgresql && subs_db_mode = 3 && notifier_processes != 0 (#2739)

by kageds

### Description If I set notifier_processes = 0 then BLF (subscribe/notify) works as expected. if I set notifier_processes to anything other than 0 then the initial subscribe works fine but when the device Re-Subscribes due to expiry of the timer I see errors in the kamailio log, the subsequent susbcribe fails and BLF no longer works. ### Troubleshooting #### Reproduction This issue can be easily reproduced just by setting notifier_processes to 1. #### Debugging Data  ``` ``` #### Log Messages ``` ERROR: db_postgres [km_dbase.c:480]: db_postgres_query_lock(): transaction not in progress ERROR: presence [subscribe.c:1708]: get_database_info(): querying subscription dialog INFO: presence [subscribe.c:1129]: handle_subscribe(): getting stored info ``` #### SIP Traffic  ``` [11:28:02.095] TX to x.x.x.x:5060: SUBSCRIBE sip:1005@example.com;transport=udp SIP/2.0 Via: SIP/2.0/UDP y.y.y.y:51761;branch=z9hG4bK271d65c640 661e;rport Contact: <sip:10004@y.y.y.y:51761> Max-Forwards: 70 Route: <sip:x.x.x.x;lr> To: <sip:1005@example.com;transport=udp> From: <sip:10004@example.com>;tag=602c0c864ab45075 Call-ID: 181910a72dc93418 CSeq: 26762 SUBSCRIBE User-Agent: polycomVVX-VVX_400-UA/5.8.5.1256 Event: dialog Accept: application/dialog-info+xml Expires: 600 Supported: Content-Length: 0 [11:28:02.184] RX from x.x.x.x:5060: SIP/2.0 202 OK Via: SIP/2.0/UDP y.y.y.y:51761;branch=z9hG4bK271d65c640 661e;rport=51761;received=y.y.y.y To: <sip:1005@example.com;transport=udp>;tag=f055057275da74fa400fb8f3e0bfdfcf-718a1cd7 From: <sip:10004@example.com>;tag=602c0c864ab45075 Call-ID: 181910a72dc93418 CSeq: 26762 SUBSCRIBE Expires: 600 Contact: <sip:x.x.x.x:5060;transport=udp> Content-Length: 0 [11:28:02.1 ] RX from x.x.x.x:5060: NOTIFY sip:10004@y.y.y.y:51761 SIP/2.0 Record-Route: <sip:x.x.x.x;lr=on;ftag=f055057275da74fa400fb8f3e0bfdfcf-718a1cd7> Via: SIP/2.0/UDP x.x.x.x;branch=z9hG4bK54.4071b642000000000000000000000000.0 To: <sip:10004@example.com>;tag=602c0c864ab45075 From: <sip:1005@example.com>;tag=f055057275da74fa400fb8f3e0bfdfcf-718a1cd7 CSeq: 1 NOTIFY Call-ID: 181910a72dc93418 Content-Length: 266 Max-Forwards: 70 Event: dialog Contact: <sip:x.x.x.x:5060;transport=udp> Subscription-State: active;expires=600 Content-Type: application/dialog-info+xml <?xml version="1.0"?> <dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="1" state="full" entity="sip:1005@example.com"> <dialog id="615293b33c62dec073e05d9421e9f48b" direction="recipient"> <state>terminated</state> </dialog> </dialog-info> [11:28:02.1 ] TX to x.x.x.x:5060: SIP/2.0 200 OK Via: SIP/2.0/UDP x.x.x.x;branch=z9hG4bK54.4071b642000000000000000000000000.0 To: <sip:10004@example.com>;tag=602c0c864ab45075 From: <sip:1005@example.com>;tag=f055057275da74fa400fb8f3e0bfdfcf-718a1cd7 CSeq: 1 NOTIFY Call-ID: 181910a72dc93418 Server: polycomVVX-VVX_400-UA/5.8.5.1256 Content-Length: 0 ...time...time...time... [11:37:02.190] TX to x.x.x.x:5060: SUBSCRIBE sip:x.x.x.x:5060;transport=udp SIP/2.0 Via: SIP/2.0/UDP y.y.y.y:51761;branch=z9hG4bK496e53396451225a;rport Contact: <sip:10004@y.y.y.y:51761> Max-Forwards: 70 To: <sip:1005@example.com;transport=udp>;tag=f055057275da74fa400fb8f3e0bfdfcf-718a1cd7 From: <sip:10004@example.com>;tag=602c0c864ab45075 Call-ID: 181910a72dc93418 CSeq: 26763 SUBSCRIBE User-Agent: polycomVVX-VVX_400-UA/5.8.5.1256 Event: dialog Accept: application/dialog-info+xml Expires: 600 Supported: Content-Length: 0 [11:37:02.276] RX from x.x.x.x:5060: SIP/2.0 500 Server Internal Error Via: SIP/2.0/UDP y.y.y.y:51761;branch=z9hG4bK496e53396451225a;rport=51761;received=y.y.y.y To: <sip:1005@example.com;transport=udp>;tag=f055057275da74fa400fb8f3e0bfdfcf-718a1cd7 From: <sip:10004@example.com>;tag=602c0c864ab45075 Call-ID: 181910a72dc93418 CSeq: 26763 SUBSCRIBE Content-Length: 0 ``` ### Possible Solutions  ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` kamailio version: 5.5.0 (x86_64/linux) d4c1a1 postgres version: 12.7 ``` Presence configuration: ``` modparam("presence_dialoginfo", "force_dummy_dialog", 1) modparam("presence_dialoginfo", "force_single_dialog", 1) modparam("presence_xml", "force_dummy_presence", 1) modparam("presence_xml", "force_active", 1) modparam("presence_xml", "disable_winfo", 1) modparam("presence_xml", "disable_bla", 1) modparam("presence", "subs_db_mode", 3) modparam("presence", "expires_offset", 0) modparam("presence", "send_fast_notify", 1) modparam("presence", "clean_period", 0) modparam("presence", "db_update_period", 0) modparam("presence", "publ_cache", 0) modparam("presence", "min_expires_action", 1) modparam("presence", "min_expires", 300) modparam("presence", "max_expires", 3600) modparam("presence", "sip_uri_match", 1) modparam("presence", "waitn_time", 1) modparam("presence", "notifier_processes", 1) modparam("presence", "db_url", "postgres://kamailio:***********@127.0.0.1/kamailio") modparam("presence", "xavp_cfg", "pres") modparam("presence", "local_log_level", 6) modparam("presence", "startup_mode", 0) modparam("presence", "force_delete", 1) modparam("presence", "timeout_rm_subs", 0) modparam("presence", "cseq_offset", 2) ``` db_postgres configuration: All defaults just loading the module ``` loadmodule "db_postgres.so" ``` * **Operating System**:  ``` Linux ********** 3.10.0-1062.4.3.el7.x86_64 #1 SMP Wed Nov 13 23:58:53 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2739

1 year

[kamailio/kamailio] when use pcscf_unregister behind nat (#2729)

by openspring

### Description  ``` As you can see in the picture, via_host and received_host are different when sending registration data from outside of NAT. However, in the pcscf_unregister function, via_host and received_host are the same value.The pcontact structure in memory could not be found ``` #### Log Messages  ``` ![image](https://user-images.githubusercontent.com/38756641/117534145-d0990d00-b022-11eb-9fd5-0c52437db2ad.png) ![image](https://user-images.githubusercontent.com/38756641/117534235-1fdf3d80-b023-11eb-973e-d7ae3787e875.png) ``` ### Possible Solutions  ``` change the pcscf_unregister function, and add Two parameters ``` ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.4.4 (x86_64/linux) 8d6c2b flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 8d6c2b compiled on 14:04:08 Apr 26 2021 with gcc 4.8.5 ``` * **Operating System**:  ``` Linux iZhp329ygro5y3v090vnwpZ 3.10.0-957.21.3.el7.x86_64 #1 SMP Tue Jun 18 16:35:19 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2729

1 year

[kamailio/kamailio] lost: lost_held_dereference do not handles error message (#2724)

by sergey-safarov

### Description When LIS server failed, then LIS send message like ``` The error response to the request is an error document. The following response shows an example error response. HTTP/1.1 200 OK Server: Example LIS Expires: Tue, 10 Jan 2006 03:49:20 GMT Cache-control: private Content-Type: application/held+xml;charset=utf-8 Content-Length: 182 <?xml version="1.0"?> <error xmlns="urn:ietf:params:xml:ns:geopriv:held" code="locationUnknown"> <message xml:lang="en">Unable to determine location </message> </error> ``` Here is HTTP code is 200. lost_held_dereference now simply check HTTP code and do not check XML body. Expected XML content check for: 1. XML HELD error message 2. check `findServiceResponse` or `presence` element check like it done for `lost_query`. This check is important because PIDF-LO object may be added to the multipart body. And HELD XML error handling prevents error message addition as PDF-LO object. -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2724

1 year

[kamailio/kamailio] Kamailio resets $ru in branch_route context, probably race condition (#2708)

by Henning Westerholt

### Description Kamailio resets the $ru in a branch_route context, probably due a race condition and/or bug. Scenario: - Calls is established and answered with 404 - Kamailio enters failure_route - failure_route calls t_relay() - branch_route is entered - new branch is created with $ru = $ru; - next operation trying to access content of the $ru fails: Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: pv [pv_core.c:325]: pv_get_ruri_attr(): failed to parse the R-URI ### Troubleshooting Happens on a production system, after upgrade from 5.2.x to 5.3.9. Research regarding similar bugs have not produced something useful so far. #### Reproduction Issue happens less than 10 times a day and so far could not be easily reproduced. #### Debugging Data Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: NOTICE: 7e8bb2ba47f5ccc |-----> Failure Code 404<- Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:failure_route=[Failure] c=[/etc/kamailio/kamailio.cfg] l=1720 a=5 n=route Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:failure_route=[RELAY] c=[/etc/kamailio/kamailio.cfg] l=703 a=16 n=if Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:failure_route=[RELAY] c=[/etc/kamailio/kamailio.cfg] l=699 a=25 n=is_method Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:failure_route=[RELAY] c=[/etc/kamailio/kamailio.cfg] l=702 a=16 n=if Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:failure_route=[RELAY] c=[/etc/kamailio/kamailio.cfg] l=701 a=25 n=t_is_set Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:failure_route=[RELAY] c=[/etc/kamailio/kamailio.cfg] l=701 a=25 n=t_on_branch Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:failure_route=[RELAY] c=[/etc/kamailio/kamailio.cfg] l=707 a=16 n=if Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:failure_route=[RELAY] c=[/etc/kamailio/kamailio.cfg] l=703 a=25 n=is_method Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:failure_route=[RELAY] c=[/etc/kamailio/kamailio.cfg] l=706 a=16 n=if Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:failure_route=[RELAY] c=[/etc/kamailio/kamailio.cfg] l=705 a=25 n=t_is_set Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:failure_route=[RELAY] c=[/etc/kamailio/kamailio.cfg] l=707 a=25 n=t_on_branch_failure Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:failure_route=[RELAY] c=[/etc/kamailio/kamailio.cfg] l=720 a=16 n=if Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:failure_route=[RELAY] c=[/etc/kamailio/kamailio.cfg] l=711 a=25 n=is_method Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:failure_route=[RELAY] c=[/etc/kamailio/kamailio.cfg] l=714 a=16 n=if Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:failure_route=[RELAY] c=[/etc/kamailio/kamailio.cfg] l=713 a=25 n=t_is_set Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:failure_route=[RELAY] c=[/etc/kamailio/kamailio.cfg] l=713 a=25 n=t_on_failure Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:failure_route=[RELAY] c=[/etc/kamailio/kamailio.cfg] l=742 a=16 n=if Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:failure_route=[RELAY] c=[/etc/kamailio/kamailio.cfg] l=720 a=24 n=t_relay Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:branch_route=[MANAGE_BRANCH] c=[/etc/kamailio/kamailio.cfg] l=2142 a=16 n=if Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:branch_route=[MANAGE_BRANCH] c=[/etc/kamailio/kamailio.cfg] l=2135 a=63 n=assign Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:branch_route=[MANAGE_BRANCH] c=[/etc/kamailio/kamailio.cfg] l=2147 a=16 n=if Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:branch_route=[MANAGE_BRANCH] c=[/etc/kamailio/kamailio.cfg] l=2142 a=25 n=is_method Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: *** cfgtrace:branch_route=[MANAGE_BRANCH] c=[/etc/kamailio/kamailio.cfg] l=2142 a=63 n=assign Apr 13 11:44:39 proxy1 /usr/sbin/kamailio[2202]: ERROR: pv [pv_core.c:325]: pv_get_ruri_attr(): failed to parse the R-URI #### Log Messages See cfgtrace logging above. #### SIP Traffic Not easily to provide as its a productive system in a clustered setup. ### Possible Solutions Ideas on how to further debug this error are welcome. ### Additional Information * kamailio 5.3.9 -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2708

1 year

← Newer
1
...
4
5
6
7
8
9
10
...
21
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev August 2023