### Description
I encountered an issue with a specific device that is receiving a T.38 fax. The call gets established towards the device normally with inband media, then the device requests T.38 media and tries to remove the audio media via sending port 0 in the ReInvite SDP. Also it sends connection-information only on the media level and there is no "c=" on the session level.
Reading through the related RFCs and the kamailio code and discussing this on the mailing list, we came to the conclusion that kamailio is doing everything correct as per RFC. Though we were wondering if it would be possible to adjust the parser to be not as strict as it is right now, and allow a missing "c=" line on the media-level if the stream is removed/rejected via port 0, since i see no sense in requiring connection information. Of course we are also in contact with the vendor to hopefully adjust on their side.
Here are the related RFCs:
1. RFC8866 5.7
`A session description MUST contain either at least one "c=" line in each media description or a single "c=" line at the session level. It MAY contain a single session-level "c=" line and additional media-level "c=" line(s) per-media-description, in which case the media-level values override the session-level settings for the respective media.`
2. RFC3264 8.2
`Existing media streams are removed by creating a new SDP with the port number for that stream set to zero. The stream description MAY omit all attributes present previously, and MAY list just a single media format.`
At first i was especially confused by the RFC3264 8.2 part, since it seemed correct what the device is sending, but if you read carefully and keep the wording for SDP in mind only attributes ("a=") MAY be omitted. So a "c=" line should still be in the SDP for the removed media if it's not included on the session-level. Or do you see this differently?
### Expected behavior
Kamailio allows and parses the SDP when there is no session-wide "c=", a media stream is being removed via port zero and there is no "c=" for this media stream and only the remaining media streams include a "c=" line.
#### Actual observed behavior
Kamailio throws an error when trying to parse the SDP.
#### Log Messages
```
<core> [core/parser/sdp/sdp.c:523]: parse_sdp_session(): can't find media IP in the message
```
#### SIP Traffic
```
v=0
o=xmserver 1726638425 1726638427 IN IP4 169.254.1.1
s=xmserver
t=0 0
m=audio 0 RTP/AVP 8
m=image 56002 udptl t38
c=IN IP4 169.254.1.1
a=sendrecv
a=T38FaxVersion:0
a=T38MaxBitRate:14400
a=T38FaxFillBitRemoval:0
a=T38FaxTranscodingMMR:0
a=T38FaxTranscodingJBIG:0
a=T38FaxRateManagement:transferredTCF
a=T38FaxMaxBuffer:200
a=T38FaxMaxDatagram:72
a=T38FaxUdpEC:t38UDPRedundancy
```
### Possible Solutions
### Additional Information
* **Kamailio Version** - output of `kamailio -v`
```
version: kamailio 5.8.3 (x86_64/linux)
flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, MEM_JOIN_FREE, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED
ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_SEND_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: unknown
compiled with gcc 12.2.0
```
* **Operating System**:
```
Debian 12
Linux hostname 6.1.0-20-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.85-1 (2024-04-11) x86_64 GNU/Linux
```
--
Reply to this email directly or view it on GitHub:
https://github.com/kamailio/kamailio/issues/3982
You are receiving this because you are subscribed to this thread.
Message ID: <kamailio/kamailio/issues/3982(a)github.com>
Hello,
Kamailio SIP Server project is organizing another meeting of its
developers and community members during November 19-20, 2024 (Tue-Wed),
hosted again by sipgate.de in Dusseldorf, Germany.
The event is intended to facilitate the interaction between Kamailio
developers and contributors in order to offer a convenient environment
for working together on several topics of high interest for the project,
including writing code for Kamailio and its tools, improving
documentation, or discuss about future development.
Everyone from the community is welcome to join, developer or user
interested in helping the project. Please note we have a limited
capacity of seats in the meeting room, the main policy for accepting
participants being first come first server. Also, very important to be
aware that this is not an event to learn how to use Kamailio.
More details about the event, the venue, how to register, are available at:
* https://www.kamailio.org/w/developers-meeting/
Looking forward to those two intensive hacking Kamailio days in Dusseldorf!
Cheers,
Daniel
--
Daniel-Constantin Mierla (@ asipto.com)
twitter.com/miconda -- linkedin.com/in/miconda
Kamailio Consultancy, Training and Development Services -- asipto.com
<!-- Kamailio Pull Request Template -->
#### Pre-Submission Checklist
<!-- Go over all points below, and after creating the PR, tick all the checkboxes that apply -->
<!-- All points should be verified, otherwise, read the CONTRIBUTING guidelines from above-->
<!-- If you're unsure about any of these, don't hesitate to ask on sr-dev mailing list -->
- [X] Commit message has the format required by CONTRIBUTING guide
- [X] Commits are split per component (core, individual modules, libs, utils, ...)
- [X] Each component has a single commit (if not, squash them into one commit)
- [X] No commits to README files for modules (changes must be done to docbook files
in `doc/` subfolder, the README file is autogenerated)
#### Type Of Change
- [ ] Small bug fix (non-breaking change which fixes an issue)
- [ ] New feature (non-breaking change which adds new functionality)
- [X] Breaking change (fix or feature that would change existing functionality)
#### Checklist:
<!-- Go over all points below, and after creating the PR, tick the checkboxes that apply -->
- [ ] PR should be backported to stable branches
- [X] Tested changes locally
- [ ] Related to issue #XXXX (replace XXXX with an open issue number)
#### Description
Long overdue clean-up of `app_python3`; remove legacy modules and rely solely on KEMI.
Bring it in sync with `app_python3s`.
Larger background: this is part I of a series of commits to enable free-threading builds of python to be used in kamailio.
https://py-free-threading.github.io/
You can view, comment on, or merge this pull request online at:
https://github.com/kamailio/kamailio/pull/3986
-- Commit Summary --
* app_python3: removal of legacy modules
-- File Changes --
M src/modules/app_python3/app_python3_mod.c (14)
D src/modules/app_python3/mod_Core.c (68)
D src/modules/app_python3/mod_Core.h (36)
D src/modules/app_python3/mod_Logger.c (266)
D src/modules/app_python3/mod_Logger.h (37)
D src/modules/app_python3/mod_Ranks.c (96)
D src/modules/app_python3/mod_Ranks.h (35)
D src/modules/app_python3/mod_Router.c (84)
D src/modules/app_python3/mod_Router.h (36)
M src/modules/app_python3/python_iface.c (12)
-- Patch Links --
https://github.com/kamailio/kamailio/pull/3986.patchhttps://github.com/kamailio/kamailio/pull/3986.diff
--
Reply to this email directly or view it on GitHub:
https://github.com/kamailio/kamailio/pull/3986
You are receiving this because you are subscribed to this thread.
Message ID: <kamailio/kamailio/pull/3986(a)github.com>
<!--
Kamailio Project uses GitHub Issues only for bugs in the code or feature requests. Please use this template only for bug reports.
If you have questions about using Kamailio or related to its configuration file, ask on sr-users mailing list:
* https://lists.kamailio.org/mailman3/postorius/lists/sr-users.lists.kamailio…
If you have questions about developing extensions to Kamailio or its existing C code, ask on sr-dev mailing list:
* https://lists.kamailio.org/mailman3/postorius/lists/sr-dev.lists.kamailio.o…
Please try to fill this template as much as possible for any issue. It helps the developers to troubleshoot the issue.
Note that an issue report may be closed automatically after about 2 months
if there is no interest from developers or community users on pursuing it, being
considered expired. In such case, it can be reopened by writing a comment that includes
the token `/notexpired`. About two weeks before considered expired, the issue is
marked with the label `stale`, trying to notify the submitter and everyone else
that might be interested in it. To remove the label `stale`, write a comment that
includes the token `/notstale`. Also, any comment postpone the `expire` timeline,
being considered that there is interest in pursuing the issue.
If there is no content to be filled in a section, the entire section can be removed.
You can delete the comments from the template sections when filling.
You can delete next line and everything above before submitting (it is a comment).
-->
### Description
We are facing a hang issue with Kamailio for the get_profile_size method. Randomly, the Kamailio got hangs, and the CPU went 100%.
During the hanging time, we generated the TRAP and we could see that the hang happened on the get_profile_size method. We are getting this hang randomly in dlg_profile.c of the following lines:
The hang occurs, causing the CPU to spike to 100% at one of the following lines randomly:
1. if(value->len == ph->value.len && memcmp(value->s, ph->value.s, value->len) == 0) {
2. ph = ph->next;
3. while(ph != profile->entries[i].first);
During our analysis, we found that PROCESS ID 7608 gets a spike of 100% utilization.
We suspect there may be an issue with the processing of the 'ph' variable, but we couldn't identify the root cause. I've attached the Kamailio TRAP for further details. Could you please suggest what might be causing this problem and how we can resolve it?
<!--
Explain what you did, what you expected to happen, and what actually happened.
-->
### Troubleshooting
We have analysed the coredump and TRAP, And found that the issue could be from the following lines:
1. if(value->len == ph->value.len && memcmp(value->s, ph->value.s, value->len) == 0) {
2. ph = ph->next;
3. while(ph != profile->entries[i].first);
#### Reproduction
This issue is occurring randomly.
<!--
If the issue can be reproduced, describe how it can be done.
-->
#### Debugging Data
I have attached the TRAP data.
---start 7608 -----------------------------------------------------
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
get_profile_size (profile=0x7f7095698f50, value=0x7ffd5e21db20) at dlg_profile.c:860
860 }while( ph!=profile->entries[i].first );
#0 get_profile_size (profile=0x7f7095698f50, value=0x7ffd5e21db20) at dlg_profile.c:860
n = 0
i = 9
ph = 0x7f70958d3c98
#1 0x00007f7195585785 in w_get_profile_size_helper (msg=0x7f7198418558, profile=0x7f7095698f50, value=0x7ffd5e21db20, spd=0x7f71983a8cf0) at dialog.c:941
size = 32625
val = {rs = {s = 0x7ffd5e21da80 "\260\332!^\375\177", len = 591976160}, ri = xxxxxxxx77096, flags = 32765}
__func__ = "w_get_profile_size_helper"
#2 0x00007f7195585fd2 in w_get_profile_size3 (msg=0x7f7198418558, profile=0x7f7095698f50 "\200\220i\225p\177", value=0x7f71983b4b30 "80;\230q\177", result=0x7f71983a8cf0 "\004") at dialog.c:982
pve = 0x7f71983b4b30
val_s = {s = 0x7f7198346dd0 "2777995", len = 7}
spd = 0x7f71983a8cf0
__func__ = "w_get_profile_size3"
<!--
If you got a core dump, use gdb to extract troubleshooting data - full backtrace,
local variables and the list of the code at the issue location.
gdb /path/to/kamailio /path/to/corefile
bt full
info locals
list
If you are familiar with gdb, feel free to attach more of what you consider to
be relevant.
-->
#### Log Messages
When Kamailio hangs, the logs are not written to the kamailio.log file.
<!--
Check the syslog file and if there are relevant log messages printed by Kamailio, add them next, or attach to issue, or provide a link to download them (e.g., to a pastebin site).
-->
#### SIP Traffic
I have attached the TRAP file.
<!--
If the issue is exposed by processing specific SIP messages, grab them with ngrep or save in a pcap file, then add them next, or attach to issue, or provide a link to download them (e.g., to a pastebin site).
-->
### Possible Solutions
We are expecting some kind of solution for it.
<!--
If you found a solution or workaround for the issue, describe it. Ideally, provide a pull request with a fix.
-->
### Additional Information
* **Kamailio Version** - output of `kamailio -v`
```
kamailio version is 5.5.5```
* **Operating System**:
[gdb_kamailio_trap.zip](https://github.com/user-attachments/files/16581474/g…
```
"Debian GNU/Linux 10 (buster)"```
--
Reply to this email directly or view it on GitHub:
https://github.com/kamailio/kamailio/issues/3947
You are receiving this because you are subscribed to this thread.
Message ID: <kamailio/kamailio/issues/3947(a)github.com>
<!--
Kamailio Project uses GitHub Issues only for bugs in the code or feature requests. Please use this template only for bug reports.
If you have questions about using Kamailio or related to its configuration file, ask on sr-users mailing list:
* https://lists.kamailio.org/mailman3/postorius/lists/sr-users.lists.kamailio…
If you have questions about developing extensions to Kamailio or its existing C code, ask on sr-dev mailing list:
* https://lists.kamailio.org/mailman3/postorius/lists/sr-dev.lists.kamailio.o…
Please try to fill this template as much as possible for any issue. It helps the developers to troubleshoot the issue.
Note that an issue report may be closed automatically after about 2 months
if there is no interest from developers or community users on pursuing it, being
considered expired. In such case, it can be reopened by writing a comment that includes
the token `/notexpired`. About two weeks before considered expired, the issue is
marked with the label `stale`, trying to notify the submitter and everyone else
that might be interested in it. To remove the label `stale`, write a comment that
includes the token `/notstale`. Also, any comment postpone the `expire` timeline,
being considered that there is interest in pursuing the issue.
If there is no content to be filled in a section, the entire section can be removed.
You can delete the comments from the template sections when filling.
You can delete next line and everything above before submitting (it is a comment).
-->
### Description
Hello, I am using ndb_redis module with TLS and redis-cluster. kamailio connects to the cluster endpoint when getting data, gets a 'MOVED' response and prints below error, it does not get data from the new host.
### Troubleshooting
I have verified that I can connect to the cluster endpoint and the host in 'MOVED' using redis-cli on the system that kamailio is running on. I tried to connect to a self hosted cluster without TLS, it works as expected. It also works as expected with TLS and a single redis host.
#### Reproduction
Connect to a redis-cluster over TLS
#### Log Messages
<!--
Check the syslog file and if there are relevant log messages printed by Kamailio, add them next, or attach to issue, or provide a link to download them (e.g., to a pastebin site).
-->
```
2024-06-25T20:48:53.626708963Z 2024-06-25 20:48:53.626584 3(17) NOTICE: {Kam 192.168.20.4 503874790_98536808 1 753067 INVITE}ndb_redis [redis_client.c:437]: redisc_get_server(): Hash 31807 (ra)
2024-06-25T20:48:53.626710053Z 2024-06-25 20:48:53.626600 3(17) DEBUG: {Kam 192.168.20.4 503874790_98536808 1 753067 INVITE}ndb_redis [redis_client.c:440]: redisc_get_server(): Entry 31807 (ra)
2024-06-25T20:48:53.626711073Z 2024-06-25 20:48:53.626636 3(17) NOTICE: {Kam 192.168.20.4 503874790_98536808 1 753067 INVITE}ndb_redis [redis_client.c:444]: redisc_get_server(): Using entry 31807 (ra)
2024-06-25T20:48:53.626712073Z 2024-06-25 20:48:53.626651 3(17) DEBUG: {Kam 192.168.20.4 503874790_98536808 1 753067 INVITE}ndb_redis [redis_client.c:1030]: redisc_exec(): rsrv->ctxRedis = 0x556b4456dc20
2024-06-25T20:48:53.626713073Z 2024-06-25 20:48:53.626667 3(17) DEBUG: {Kam 192.168.20.4 503874790_98536808 1 753067 INVITE}ndb_redis [redis_client.c:1036]: redisc_exec(): rsrv->ctxRedis = 0x556b4456dc20
2024-06-25T20:48:53.626810463Z 2024-06-25 20:48:53.626762 3(17) DEBUG: {Kam 192.168.20.4 503874790_98536808 1 753067 INVITE}ndb_redis [redis_client.c:896]: check_cluster_reply(): Redis replied: "MOVED 3667 testdbredis-masked-hostname.00000000001110000000.130-characters-long.00000000000011111111100000000.availability-zone.amazonaws.com:6379"
2024-06-25T20:48:53.626811523Z 2024-06-25 20:48:53.626777 3(17) DEBUG: {Kam 192.168.20.4 503874790_98536808 1 753067 INVITE}ndb_redis [redis_client.c:904]: check_cluster_reply(): Port "6379" [4] => 6379
2024-06-25T20:48:53.626816413Z 2024-06-25 20:48:53.626793 3(17) DEBUG: {Kam 192.168.20.4 503874790_98536808 1 753067 INVITE}ndb_redis [redis_client.c:914]: check_cluster_reply(): Host "testdbredis-masked-hostname.00000000001110000000.130-characters-long.000000…" [130]
2024-06-25T20:48:53.626846113Z 2024-06-25 20:48:53.626810 3(17) NOTICE: {Kam 192.168.20.4 503874790_98536808 1 753067 INVITE}ndb_redis [redis_client.c:925]: check_cluster_reply(): Name of new connection: testdbredis-masked-hostname.00000000001110000000.130-characters-long.00000000000011111111100000000.
2024-06-25T20:48:53.626851443Z 2024-06-25 20:48:53.626827 3(17) NOTICE: {Kam 192.168.20.4 503874790_98536808 1 753067 INVITE}ndb_redis [redis_client.c:437]: redisc_get_server(): Hash 968070864 (testdbredis-masked-hostname.00000000001110000000.130-characters-long.00000000000011111111100000000.)
2024-06-25T20:48:53.626896173Z 2024-06-25 20:48:53.626844 3(17) DEBUG: {Kam 192.168.20.4 503874790_98536808 1 753067 INVITE}ndb_redis [redis_client.c:440]: redisc_get_server(): Entry 31807 (ra)
2024-06-25T20:48:53.626897503Z 2024-06-25 20:48:53.626861 3(17) NOTICE: {Kam 192.168.20.4 503874790_98536808 1 753067 INVITE}ndb_redis [redis_client.c:450]: redisc_get_server(): No entry found.
2024-06-25T20:48:53.626955363Z 2024-06-25 20:48:53.626877 3(17) ERROR: {Kam 192.168.20.4 503874790_98536808 1 753067 INVITE}ndb_redis [redis_client.c:947]: check_cluster_reply(): failed to print server spec string
2024-06-25T20:48:53.626957263Z 2024-06-25 20:48:53.626893 3(17) DEBUG: {Kam 192.168.20.4 503874790_98536808 1 753067 INVITE}ndb_redis [redis_client.c:1115]: redisc_exec(): rpl->rplRedis->type:6
2024-06-25T20:48:53.626958443Z 2024-06-25 20:48:53.626908 3(17) ERROR: {Kam 192.168.20.4 503874790_98536808 1 753067 INVITE}ndb_redis [redis_client.c:1117]: redisc_exec(): Redis error:MOVED 3667 testdbredis-masked-hostname.00000000001110000000.130-characters-long.00000000000011111111100000000.availability-zone.amazonaws.com:6379
```
### Additional Information
* **Kamailio Version** - output of `kamailio -v`
```
version: kamailio 5.8.1 (x86_64/linux) 384843
flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, MEM_JOIN_FREE, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED
ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_SEND_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: 384843
compiled on 19:05:30 Jun 25 2024 with gcc 12.2.0
```
* Hiredis(v1.2.0) and hiredis-cluster(v0.13.0) are installed from source, both with ssl support.
* **Operating System**:
<!--
Details about the operating system, the type: Linux (e.g.,: Debian 8.4, Ubuntu 16.04, CentOS 7.1, ...), MacOS, xBSD, Solaris, ...;
Kernel details (output of `lsb_release -a` and `uname -a`)
-->
```
Debian 12
```
### Kamailio config snippet
```
loadmodule "ndb_redis.so"
.
.
# ----- ndb_redis params -----
modparam("ndb_redis", "server", "name=ra;addr=cluster.testdbredis-masked-hostname.0000000011111111100000.availability-zone.amazonaws.com;port=6379;tls=1")
modparam("ndb_redis", "init_without_redis", 1)
modparam("ndb_redis", "cluster", 1)
modparam("ndb_redis", "allow_dynamic_nodes", 1)
modparam("ndb_redis", "ca_path", "/etc/ssl/certs")
modparam("ndb_redis", "debug", 1)
.
.
redis_cmd("ra", "HMGET usr_preferences:entry::%s:%s blocked", "$rU", "$fU", "r");
if($redis(r=>value[0]) == 1) {
.
}
```
--
Reply to this email directly or view it on GitHub:
https://github.com/kamailio/kamailio/issues/3894
You are receiving this because you are subscribed to this thread.
Message ID: <kamailio/kamailio/issues/3894(a)github.com>
Hi there,
I am currently using the tls_wolfssl module with kamailio and was wondering why the ability to set a cipher list was disabled.
From my own testing, uncommenting line 975 in tls_domain.c/ksr_tls_fix_domain adds the functionality and we haven't seen any issues with this so far.
Was there an issue with this when the module was first created? Should I be avoiding using this functionality? Thanks very much.
--
Reply to this email directly or view it on GitHub:
https://github.com/kamailio/kamailio/issues/3920
You are receiving this because you are subscribed to this thread.
Message ID: <kamailio/kamailio/issues/3920(a)github.com>
related #3886
You can view, comment on, or merge this pull request online at:
https://github.com/kamailio/kamailio/pull/3978
-- Commit Summary --
* geoip: module relocated to archive
-- File Changes --
M src/Makefile.groups (8)
D src/modules/geoip/Makefile (9)
D src/modules/geoip/README (166)
D src/modules/geoip/doc/Makefile (4)
D src/modules/geoip/doc/geoip.xml (42)
D src/modules/geoip/doc/geoip_admin.xml (199)
D src/modules/geoip/geoip_mod.c (157)
D src/modules/geoip/geoip_pv.c (421)
D src/modules/geoip/geoip_pv.h (40)
-- Patch Links --
https://github.com/kamailio/kamailio/pull/3978.patchhttps://github.com/kamailio/kamailio/pull/3978.diff
--
Reply to this email directly or view it on GitHub:
https://github.com/kamailio/kamailio/pull/3978
You are receiving this because you are subscribed to this thread.
Message ID: <kamailio/kamailio/pull/3978(a)github.com>
### Description
After carrying out some load tests using the `Websocket` module, I noticed that sometimes the `websocket:closed` event is not triggered.
This problem seems to be particularly noticeable when the load is high and simultaneous. Example: 1000 records simultaneously.
In the tests carried out, I realized that the number of times the event is not triggered is small, in the order of [1-10]/1000.
I check that when I do a `ws.dump` I don't have any active connections, and I confirm that they are all effectively cleaned (`netstat -ano | grep 8061`).
However, the event is not triggered for some connections.
I can see this in the logs, and also when i display the content of an hash table, i'm dropping key inside `websocket:closed` event.
### Troubleshooting
The troubleshooting was simplistic, i.e. I ran the same test n times, and validated that the event was triggered for all connections, the number of `ws` connections listed by `Kamailio`, and the open connections.
#### Reproduction
To reproduce, we can use any mechanism that emulates the use of the `Websocket` module.
For example, I used the `sipexer` tool to create a `wss` connection with `Kamailio`, forcing simultaneous registrations.
Example command: `sipexer -cb -mt register -ex 60 -au <user> -ap <pass> -fuser example -fd mydomain -wso https://10.0.0.12:10000 -ruri sip:kamailio -su wss://kamailio:8061`
Kamailio TLS listener:
`listen=tls:10.0.0.12:8061 advertise PUBLIC_IP`
Websocket module:
```
loadmodule "websocket.so"
tcp_accept_no_cl=yes
```
```
event_route[websocket:closed] {
xlog("L_NOTICE", "WebSocket connection closed $proto:$si:$sp\n");
<I also delete where a htable key>
}
```
#### Debugging Data
```
[root@ ~]$ prcmd ws.dump
{
connections: {
}
info: {
wscounter: 0
truncated: no
}
}
[root@ ~]$ netstat -ano | grep 8061
tcp 0 0 10.0.0.12:8061 0.0.0.0:* LISTEN off (0.00/0/0)
[root ~]$ prcmd htable.dump wsauth | grep "name" | wc -l
3
[root ~]$ cat /var/log/kamailio.log | grep "WebSocket connection closed" | wc -l
997
[root ~]$ cat /var/log/proxy-registrar/proxy-registrar.log | grep "ERR" | grep "WAR" | wc -l
0
```
#### Log Messages
Nothing relevant.
#### SIP Traffic
Nothing relevant here, the SIP Flow is OK.
### Additional Information
```
version: kamailio 5.6.4 (x86_64/linux) a004cf-dirty
flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: a004cf -dirty
compiled on 23:17:27 Jun 7 2024 with gcc 4.8.5
```
* **Operating System**:
```
CentOS Linux release 7.9.2009 (Core)
```
--
Reply to this email directly or view it on GitHub:
https://github.com/kamailio/kamailio/issues/3950
You are receiving this because you are subscribed to this thread.
Message ID: <kamailio/kamailio/issues/3950(a)github.com>