sr-dev January 2025

sr-dev@lists.kamailio.org

21 participants
297 discussions

[kamailio/kamailio] tcp_timer_check_connections() logs on CRITICAL and is not caught by event_route[tcp:timeout] (Issue #3995)
by Fritjof Höst 02 Jun '25

02 Jun '25

### Description Hi! We are in the progress of upgrading from Kamailio 5.5 to 5.8. During our testing we have noticed a new error being reported from Kamailio. We don’t see any other errors following it. ```jsx /usr/sbin/kamailio[201]: CRITICAL: <core> [core/tcp_main.c:5544]: tcp_timer_check_connections(): message processing timeout on connection id: 67896 (state: 3) - closing ``` It does seem to be [new code](https://github.com/kamailio/kamailio/blob/master/src/core/tcp_main.c#… in Kamailio reporting this issue. Given that this is a fairly expected thing, cleaning up a connection which receives no traffic within the given time, is there a need for it to be reported on CRITICAL? I’d also expect it to be caught by ``` event_route[tcp:timeout] { xlog("L_INFO","connection $conid timeouts (unanswered keepalives)"); } ``` given that [the description](https://www.kamailio.org/docs/modules/stable/modules/tcpops.ht… of this one is `Called for connection timeouts (unanswered keepalives).`. ### Troubleshooting We don't have any way to reproduce it, we are still investigating it to figure out the cause. It happens around every 2 hours, so we think there might some some scheduled test or job running in our test system causing this. ### Additional Information * **Kamailio Version** - 5.8.3 * **Operating System**: Debian 12 AMI from the AWS Marketplace. -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3995 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3995(a)github.com>

6 10

[kamailio/kamailio] Possibly adjusting the SDP parser to be more lenient towards scenarios where a stream is being removed/rejected and connection-information "c=" is only available per media (no session-wide "c=") and the removed/rejected stream omits all fields (Issue #3982)
by thomas414 31 May '25

31 May '25

### Description I encountered an issue with a specific device that is receiving a T.38 fax. The call gets established towards the device normally with inband media, then the device requests T.38 media and tries to remove the audio media via sending port 0 in the ReInvite SDP. Also it sends connection-information only on the media level and there is no "c=" on the session level. Reading through the related RFCs and the kamailio code and discussing this on the mailing list, we came to the conclusion that kamailio is doing everything correct as per RFC. Though we were wondering if it would be possible to adjust the parser to be not as strict as it is right now, and allow a missing "c=" line on the media-level if the stream is removed/rejected via port 0, since i see no sense in requiring connection information. Of course we are also in contact with the vendor to hopefully adjust on their side. Here are the related RFCs: 1. RFC8866 5.7 `A session description MUST contain either at least one "c=" line in each media description or a single "c=" line at the session level. It MAY contain a single session-level "c=" line and additional media-level "c=" line(s) per-media-description, in which case the media-level values override the session-level settings for the respective media.` 2. RFC3264 8.2 `Existing media streams are removed by creating a new SDP with the port number for that stream set to zero. The stream description MAY omit all attributes present previously, and MAY list just a single media format.` At first i was especially confused by the RFC3264 8.2 part, since it seemed correct what the device is sending, but if you read carefully and keep the wording for SDP in mind only attributes ("a=") MAY be omitted. So a "c=" line should still be in the SDP for the removed media if it's not included on the session-level. Or do you see this differently? ### Expected behavior Kamailio allows and parses the SDP when there is no session-wide "c=", a media stream is being removed via port zero and there is no "c=" for this media stream and only the remaining media streams include a "c=" line. #### Actual observed behavior Kamailio throws an error when trying to parse the SDP. #### Log Messages ``` <core> [core/parser/sdp/sdp.c:523]: parse_sdp_session(): can't find media IP in the message ``` #### SIP Traffic ``` v=0 o=xmserver 1726638425 1726638427 IN IP4 169.254.1.1 s=xmserver t=0 0 m=audio 0 RTP/AVP 8 m=image 56002 udptl t38 c=IN IP4 169.254.1.1 a=sendrecv a=T38FaxVersion:0 a=T38MaxBitRate:14400 a=T38FaxFillBitRemoval:0 a=T38FaxTranscodingMMR:0 a=T38FaxTranscodingJBIG:0 a=T38FaxRateManagement:transferredTCF a=T38FaxMaxBuffer:200 a=T38FaxMaxDatagram:72 a=T38FaxUdpEC:t38UDPRedundancy ``` ### Possible Solutions ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.8.3 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, MEM_JOIN_FREE, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_SEND_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 12.2.0 ``` * **Operating System**: ``` Debian 12 Linux hostname 6.1.0-20-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.85-1 (2024-04-11) x86_64 GNU/Linux ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3982 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3982(a)github.com>

3 5

[kamailio/kamailio] Inactive video stream: can't find media IP in the message (Issue #3406)
by schoberw 31 May '25

31 May '25

### Description In some situations the other side UA must reply with an inactive media stream. E.g. if video was added but not supported by the other side. The UAS then must answer with an m=video 0 RTP/.. line. It seams that the video section must contain a c= line with an IP address for rtpengine to function. If there is no c line (no IP address) the SDP body cannot be parsed and thus no RTP proxy is invoked. ### Troubleshooting Not easy to reproduce since the answer must bei "wrong". Is it correct to reply an SDP body (media = video) like this? ``` m=video 0 RTP/AVPF 96 a=label:1 a=inactive a=mid:1 ``` Maybe not (but Audiocodes SBC lates LTS version does it) - so we are dependent on other side now that this service works. #### Reproduction reInvite with Video to a UA that has no video Support (e.g. Bria -> Snom). Drop the c line in the video part with some textops in 200 OK (just to reproduce of course). A -> B, connect the call A -> + video, B has no video support A presses hold #### Log Messages Incoming 200 OK after doing hold with an inactive video: ``` v=0 o=root 436040161 309284577 IN IP4 1.2.3.5 s=call t=0 0 m=audio 14200 RTP/AVPF 9 8 126 c=IN IP4 1.2.3.5 a=ptime:20 a=recvonly a=mid:0 a=rtpmap:9 G722/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:126 telephone-event/8000 a=fmtp:126 0-15 m=video 0 RTP/AVPF 96 a=label:1 a=inactive a=mid:1 Mar 27 17:52:22 c5p05es2-1 /usr/sbin/kamailio[2938205]: ERROR: <core> [core/parser/sdp/sdp.c:490]: parse_sdp_session(): can't find media IP in the message Mar 27 17:52:22 c5p05es2-1 /usr/sbin/kamailio[2938205]: INFO: <script>: >>> Sending Reply: 200 OK (1.2.3.4:443 -> 100.108.48.38:65251) ``` Compare to working SDP parsing: ``` a=rtpmap:9 G722/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:126 telephone-event/8000 a=fmtp:126 0-15 m=video 0 RTP/AVP 96 c=IN IP4 1.2.3.5 a=inactive a=mid:1 Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: ONREPLY_ROUTE[FORWARD] Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: ROUTE[RTPP_REPLY] Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: > 200 with video Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: > 200 with inactive video Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: > Remove inactive video Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: > Answer to WebRTC client: 200 - qijpuibkv6ufhnd282ks Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: >>> Sending Reply: 200 OK (91.237.65.14:443 -> 80.108.48.38:65388) ``` ### Possible Solutions Tried to fix in script: ``` if(sdp_with_media("video")) xlog("L_INFO", "> $rs with video"); if(sdp_with_active_media("video")) xlog("L_INFO", "> $rs with active video"); if(!sdp_with_active_media("video")) xlog("L_INFO", "> $rs with inactive video"); if(sdp_with_media("video") && !sdp_with_active_media("video")) { # try fix for RMT#60189 xlog("L_INFO", "> Remove inactive video"); sdp_remove_media("video"); msg_apply_changes(); # needed? } ``` But since sdpops cannot parse it cannot remove the buggy media, too. See the log: non of the xlog is logging. If there is inactive media the c line is not mandatory. The parser should accept this by adding a default IP of 0.0.0.0, if needed Doing tricks with textops is not a easy nor performant solution to accept this wrong SDP from other parties. ### Additional Information ``` version: kamailio 5.6.4 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 10.2.1 ``` * **Operating System**: Debian Bullseye -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3406 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3406(a)github.com>

3 5

[kamailio/kamailio] tls: Create one shared context and reuse it. (PR #3972)
by Xenofon Karamanos 28 May '25

28 May '25

#### Pre-Submission Checklist    - [x] Commit message has the format required by CONTRIBUTING guide - [x] Commits are split per component (core, individual modules, libs, utils, ...) - [x] Each component has a single commit (if not, squash them into one commit) - [x] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [x] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [x] Tested changes locally - [x] Related to issue #3823 #### Description  This PR aims to implement what was discussed in [mailing list](https://lists.kamailio.org/mailman3/hyperkitty/list/sr-dev@lists.kama… regarding some `tls.reload` and increasing memory usage. It adds a new parameter `enable_shared_ctx` in `tls` module that if set to 0, preserves the old behavior and if set to 1 (other than 0 tbh), it creates a single SSL context that is being shared. This have the effect of using way less memory when initialized as well, but also minimizes (can't say it fixes the problem) the `tls.reload` memory increase. I have also added a small markdown (comparison.md) file, where some comparisons where made between enabled/disabled shared context and with/without CA file (where the initial problem was occurring by the reporter). Feedback would be necessary to verify whether this patch, acts as expected and kamailio works as intented. You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/3972 -- Commit Summary -- * tls: Add parameter for shared contexts * tls: Comparison for enable_shared_ctx -- File Changes -- A comparison.md (15) M src/modules/tls/tls_domain.c (172) M src/modules/tls/tls_mod.c (11) M src/modules/tls/tls_mod.h (1) -- Patch Links -- https://github.com/kamailio/kamailio/pull/3972.patch https://github.com/kamailio/kamailio/pull/3972.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/3972 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/3972(a)github.com>

4 12

[kamailio/kamailio] core: local TCP socket is bound on listening address (PR #3925)
by sergey-safarov 28 May '25

28 May '25

#### Pre-Submission Checklist - [x] Commit message has the format required by CONTRIBUTING guide - [x] Commits are split per component (core, individual modules, libs, utils, ...) - [x] Each component has a single commit (if not, squash them into one commit) - [x] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [x] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist: - [x] PR should be backported to stable branches - [x] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description As a local IP address for TCP sending operation the Kamailio service is taking the same network_interface/IP_address, which is used by the service for TCP listening. You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/3925 -- Commit Summary -- * core: local TCP socket is bound on listening address -- File Changes -- M src/core/tcp_main.c (24) -- Patch Links -- https://github.com/kamailio/kamailio/pull/3925.patch https://github.com/kamailio/kamailio/pull/3925.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/3925 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/3925(a)github.com>

5 16

[kamailio/kamailio] ims_dialog: missing srdb1 schema definition (Issue #4100)
by Victor Seva 20 May '25

20 May '25

there's no ``kamailio-ims_dialog.xml`` at ``src/lib/srdb1/schema`` but there's a manual file created at ``utils/kamctl/mysql/ims_dialog-create.sql`` Same thing for: - ``utils/kamctl/mysql/ims_charging-create.sql`` - ``utils/kamctl/mysql/ims_usrloc_pcscf-create.sql`` - ``utils/kamctl/mysql/ims_usrloc_scscf-create.sql`` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/4100 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/4100(a)github.com>

3 10

[kamailio/kamailio] cmake: switching deb rules (Issue #4053)
by Victor Seva 10 May '25

10 May '25

Opening this generic issue to track issues when trying to switch deb package generation to cmake: -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/4053 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/4053(a)github.com>

5 56

[kamailio/kamailio] Segfault when using kamailio 5.8.4 as a presence proxy (Issue #4102)
by Joe Mordica 08 May '25

08 May '25

### Description We are now using kamailio on the edge as a presence proxy to scale presence. We have 3 internal kamailio instances handling the actual subscriptions and publishing. This works well, however, once per 24-36hours we experience a crash on the border proxy instance. We did not experience this when using the border proxy as a presence server (there was no proxying SUBSCRIBE). ### Troubleshooting #### Reproduction I believe this is happening when a customers network randomly experiences issues where it doesn't receive our replies to subscribes (and continues to send a subscribe). Logs are below. #### Debugging Data  Here's the output while replacing any sensitive info in the payload. ``` GNU gdb (Debian 13.1-3) 13.1 Copyright (C) 2023 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: <https://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word"... Reading symbols from /usr/sbin/kamailio... Reading symbols from /usr/lib/debug/.build-id/ce/c19d0ed1a928e4e25a84ae20d77e9c904a4892.debug... warning: Can't open file /dev/zero (deleted) during file-backed mapping note processing [New LWP 26] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `kamailio -DD -E -m 8000 -M 512 -f /etc/kamailio/kamailio.cfg -P /var/run/kamail'. Program terminated with signal SIGSEGV, Segmentation fault. #0 via_builder (len=len@entry=0x7ffed7e3ecb8, msg=msg@entry=0x7ff9529548b0, send_info=send_info@entry=0x7ff764d20bb0, branch=branch@entry=0x7ffed7e3ecc0, extra_params=0x0, hp=hp@entry=0x7ffed7e3ebb0) at core/msg_translator.c:2910 2910 core/msg_translator.c: No such file or directory. (gdb) bt full #0 via_builder (len=len@entry=0x7ffed7e3ecb8, msg=msg@entry=0x7ff9529548b0, send_info=send_info@entry=0x7ff764d20bb0, branch=branch@entry=0x7ffed7e3ecc0, extra_params=0x0, hp=hp@entry=0x7ffed7e3ebb0) at core/msg_translator.c:2910 via_len = <optimized out> extra_len = <optimized out> line_buf = <optimized out> max_len = <optimized out> via_prefix_len = <optimized out> address_str = <optimized out> port_str = 0x0 send_sock = 0x0 comp_len = <optimized out> comp_name_len = <optimized out> port = <optimized out> proto = <optimized out> ip = {af = 536870912, len = 0, u = {addrl = {534820896, 1586192}, addr32 = {534820896, 0, 1586192, 0}, addr16 = {47136, 8160, 0, 0, 13328, 24, 0, 0}, addr = " \270\340\037\000\000\000\000\0204\030\000\000\000\000"}} from = 0x0 local_addr = {s = {sa_family = 16, sa_data = "#\000\000\000\000\000\020\000\000\000\000\000\000"}, sin = {sin_family = 16, sin_port = 35, sin_addr = {s_addr = 0}, sin_zero = "\020\000\000\000\000\000\000"}, sin6 = {sin6_family = 16, sin6_port = 35, sin6_flowinfo = 0, sin6_addr = {__in6_u = { __u6_addr8 = "\020\000\000\000\000\000\000\000\003\000\000\000\000\000\000", __u6_addr16 = {16, 0, 0, 0, 3, 0, 0, 0}, __u6_addr32 = {16, 0, 3, 0}}}, sin6_scope_id = 3000082688}, sas = {ss_family = 16, __ss_padding = "#\000\000\000\000\000\020\000\000\000\000\000\000\000\003\000\000\000\000\000\000\000\000\241\321\262cg\357`@\000\000\000\000\000\000\000X\f-\177!V\000\000\020\016\217R\371\177\000\000\001\000\000\000!V\000\000*\000\000\000\000\000\000\000\001\000\000\000\376\177\000\000\004\360;\177!V\000\000\250,A\177!V\000\000\000\355\343\327\376\177\000\000\000\241\321\262cg\357`h\256\006R\371\177\000", __ss_align = 94701866020241}} con = 0x0 rxavp = 0x0 xname = {s = 0x0, len = -2141140176} __func__ = "via_builder" #1 0x000056217f155030 in create_via_hf (len=len@entry=0x7ffed7e3ecb8, msg=msg@entry=0x7ff9529548b0, send_info=send_info@entry=0x7ff764d20bb0, branch=branch@entry=0x7ffed7e3ecc0) at core/msg_translator.c:3232 via = <optimized out> extra_params = {s = 0x0, len = 0} hp = {host = 0x56217f4fb380 <default_global_address>, port = 0x56217f4fb370 <default_global_port>} sbuf = "\331\023\000\000\001", '\000' <repeats 18 times> --Type <RET> for more, q to quit, c to continue without paging--info locals slen = <optimized out> xparams = <optimized out> id_buf = <optimized out> id_len = 0 __func__ = "create_via_hf" __llevel = <optimized out> __kld = <optimized out> #2 0x000056217f1592f7 in build_req_buf_from_sip_req (msg=msg@entry=0x7ff9529548b0, returned_len=returned_len@entry=0x7ffed7e3eeac, send_info=send_info@entry=0x7ff764d20bb0, mode=mode@entry=128) at core/msg_translator.c:2096 len = 581 new_len = <optimized out> received_len = 0 rport_len = 0 uri_len = 0 via_len = 0 body_delta = 0 line_buf = 0x0 received_buf = 0x0 rport_buf = 0x0 new_buf = 0x0 buf = 0x56217f5866c0 <buf> "SUBSCRIBE sip:74@sip.domain.co SIP/2.0\r\nVia: SIP/2.0/UDP 12.171.207.82:25744;branch=z9hG4bK1805670803;rport\r\nFrom: \"Heather Myers\" <sip:1086448@sip.domain.co>;tag=1805518213\r\nTo: <sip:74@sip.domain.co>\r\nCa"... path_buf = {s = 0x0, len = 0} offset = 0 s_offset = 0 size = <optimized out> via_anchor = 0x7ff952951300 via_lump = <optimized out> via_rm = <optimized out> via_insert_param = 0x0 path_anchor = <optimized out> path_lump = <optimized out> branch = {s = 0x7ff952954ed8 "z9hG4bKc7ed.5819b4295fe83f981a2fc19b7f739d7e.0", len = 46} flags = 262273 --Type <RET> for more, q to quit, c to continue without paging--list udp_mtu = <optimized out> di = {send_sock = 0x0, to = {s = {sa_family = 18608, sa_data = "\225R\371\177\000\000\002\000\023\331\n4\001\r"}, sin = {sin_family = 18608, sin_port = 21141, sin_addr = { s_addr = 32761}, sin_zero = "\002\000\023\331\n4\001\r"}, sin6 = {sin6_family = 18608, sin6_port = 21141, sin6_flowinfo = 32761, sin6_addr = {__in6_u = { __u6_addr8 = "\002\000\023\331\n4\001\r\000\000\000\000\000\000\000", __u6_addr16 = {2, 55571, 13322, 3329, 0, 0, 0, 0}, __u6_addr32 = {3641901058, 218182666, 0, 0}}}, sin6_scope_id = 0}, sas = {ss_family = 18608, __ss_padding = "\225R\371\177\000\000\002\000\023\331\n4\001\r", '\000' <repeats 103 times>, __ss_align = 0}}, id = 0, send_flags = {f = 0, blst_imask = 0}, proto = 0 '\000', proto_pad0 = 0 '\000', proto_pad1 = 0} ret = <optimized out> __func__ = "build_req_buf_from_sip_req" error00 = <optimized out> #3 0x00007ff951fbe90d in prepare_new_uac (t=t@entry=0x7ff764d20880, i_req=i_req@entry=0x7ff9529548b0, branch=branch@entry=0, uri=<optimized out>, uri@entry=0x7ff9529548e8, path=<optimized out>, path@entry=0x7ff952954f60, next_hop=<optimized out>, fsocket=0x7ff9528f0e10, snd_flags=..., fproto=<optimized out>, flags=<optimized out>, instance=<optimized out>, ruid=<optimized out>, location_ua=<optimized out>) at ./src/modules/tm/t_fwd.c:482 shbuf = 0x0 add_rm_backup = <optimized out> body_lumps_backup = <optimized out> parsed_uri_bak = {user = { s = 0x56217f5866ce <buf+14> "74(a)sip.domain.co SIP/2.0\r\nVia: SIP/2.0/UDP 12.171.207.82:25744;branch=z9hG4bK1805670803;rport\r\nFrom: \"Heather Myers\" <sip:1086448@sip.domain.co>;tag=1805518213\r\nTo: <sip:74@sip.domain.co>\r\nCall-ID: 0_18056"..., len = 2}, passwd = {s = 0x0, len = 0}, host = { s = 0x56217f5866d1 <buf+17> "sip.domain.co SIP/2.0\r\nVia: SIP/2.0/UDP 12.171.207.82:25744;branch=z9hG4bK1805670803;rport\r\nFrom: \"Heather Myers\" <sip:1086448@sip.domain.co>;tag=1805518213\r\nTo: <sip:74@sip.domain.co>\r\nCall-ID: 0_18056078"..., len = 11}, port = {s = 0x0, len = 0}, params = {s = 0x0, len = 0}, sip_params = {s = 0x0, len = 0}, headers = { s = 0x0, len = 0}, port_no = 0, proto = 0, type = SIP_URI_T, flags = 0, transport = {s = 0x0, len = 0}, ttl = {s = 0x0, len = 0}, user_param = {s = 0x0, len = 0}, maddr = { s = 0x0, len = 0}, method = {s = 0x0, len = 0}, lr = {s = 0x0, len = 0}, r2 = {s = 0x0, len = 0}, gr = {s = 0x0, len = 0}, transport_val = {s = 0x0, len = 0}, ttl_val = { s = 0x0, len = 0}, user_param_val = {s = 0x0, len = 0}, maddr_val = {s = 0x0, len = 0}, method_val = {s = 0x0, len = 0}, lr_val = {s = 0x0, len = 0}, r2_val = {s = 0x0, len = 0}, gr_val = {s = 0x0, len = 0}} ret = -1 len = 32761 parsed_uri_ok_bak = <optimized out> free_new_uri = 1 msg_uri_bak = {s = 0x0, len = 0} dst_uri_bak = {s = 0x7ff9529525f0 "sip:10.52.1.13:5081", len = 19} dst_uri_backed_up = 1 path_bak = {s = 0x0, len = 0} free_path = 1 instance_bak = {s = 0x0, len = 0} ``` #### Log Messages  ``` ERROR 2025-01-10T06:00:31.847348563Z [resource.labels.containerName: kamailio] 8(28) CRITICAL: {1 1 SUBSCRIBE 0_1907143137(a)192.168.100.28} tm [timer.h:188]: _set_fr_retr(): already added: 0x7ff763e62250 , tl=0x7ff763e62270!!! ERROR 2025-01-10T06:00:31.847388483Z [resource.labels.containerName: kamailio] 8(28) CRITICAL: {1 1 SUBSCRIBE 0_1907143137(a)192.168.100.28} tm [t_fwd.c:1613]: t_send_branch(): BUG: retransmission already started for: 0x7ff763e62250 ERROR 2025-01-10T06:00:31.847394809Z [resource.labels.containerName: kamailio] 8(28) ERROR: {1 1 SUBSCRIBE 0_1907143137(a)192.168.100.28} sl [sl_funcs.c:428]: sl_reply_error(): stateless error reply used: No error (0/SL) ERROR 2025-01-10T06:00:31.847400738Z [resource.labels.containerName: kamailio] 8(28) BUG: {1 1 SUBSCRIBE 0_1907143137(a)192.168.100.28} tm [t_lookup.c:2052]: t_unref(): REQ_ERR DELAYED should have been caught much earlier for 0x7ff763e61f70: 24 (hex 18) ERROR 2025-01-10T06:00:47.346744773Z [resource.labels.containerName: kamailio] 45(65) ERROR: <core> [core/tcp_main.c:4818]: tcpconn_main_timeout(): connect 64.63.142.90:12190 failed (timeout) ERROR 2025-01-10T06:00:58.274915089Z [resource.labels.containerName: kamailio] 45(65) CRITICAL: <core> [core/pass_fd.c:281]: receive_fd(): EOF on 20 ERROR 2025-01-10T06:01:02.715789076Z [resource.labels.containerName: kamailio] 0(1) ALERT: <core> [main.c:805]: handle_sigs(): child process 26 exited by a signal 11 ERROR 2025-01-10T06:01:02.715827333Z [resource.labels.containerName: kamailio] 0(1) ALERT: <core> [main.c:809]: handle_sigs(): core was generated ERROR 2025-01-10T06:01:02.718815287Z [resource.labels.containerName: kamailio] 45(65) CRITICAL: <core> [core/pass_fd.c:281]: receive_fd(): EOF on 25 ERROR 2025-01-10T06:01:02.720985493Z [resource.labels.containerName: kamailio] 45(65) CRITICAL: <core> [core/pass_fd.c:281]: receive_fd(): EOF on 23 ERROR 2025-01-10T06:01:02.725450552Z [resource.labels.containerName: kamailio] 45(65) CRITICAL: <core> [core/pass_fd.c:281]: receive_fd(): EOF on 30 ``` #### SIP Traffic  ``` (paste your sip traffic here) ``` ### Possible Solutions I can atleast say that when this segfault happens that these logs are always present right before the crash. However, I also see instances of these logs without a crash immediately following. On the proxy we are doing this is withindlg route to send subscribes to the presence route: ``` if KSR.is_SUBSCRIBE() and KSR.is_myself_ruri() then -- in-dialog subscribe requests ksr_route_presence(); KSR.x.exit(); end ``` Any then this is our ksr_route_presence(): ``` function ksr_route_presence() if not KSR.is_SUBSCRIBE() then return 1; end local fuser = KSR.kx.get_fuser(); if fuser=='' then KSR.xlog.xinfo('Subscription attempt without username from IP ' .. KSR.kx.get_srcip() .. ' - Rejecting\n'); KSR.sl.sl_send_reply(404, 'Not Found'); KSR.x.exit(); end KSR.pv.sets('$avp(s:tenant)', string.match(fuser, '-(.*)')); local setId = '6' .. KSR.kx.get_def('DEFAULT_DISPATCH_SET'); local modeId = '7'; if KSR.dispatcher.ds_select_dst(setId, modeId)<0 then KSR.sl.send_reply(404, 'No destination'); KSR.x.exit(); end KSR.corex.set_send_socket(KSR.kx.get_def('PRIVATE_LISTEN_IP') .. ':' .. KSR.kx.get_def('INTERNAL_PORT')); KSR.tm.t_on_failure('ksr_route_rtf_dispatch'); ksr_route_relay(); end ``` ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.8.4 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, MEM_JOIN_FREE, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_SEND_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 12.2.0 ``` * **Operating System**:  ``` PRETTY_NAME="Debian GNU/Linux 12 (bookworm)" NAME="Debian GNU/Linux" VERSION_ID="12" VERSION="12 (bookworm)" VERSION_CODENAME=bookworm ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" ``` ``` Linux gke-us-south1-external-sip-800ca69e-qyb3 5.15.0-1048-gke #53-Ubuntu SMP Tue Nov 28 00:39:01 UTC 2023 x86_64 GNU/Linux ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/4102 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/4102(a)github.com>

5 31

[kamailio/kamailio] ims_diameter_server not freeing shared memory (Issue #4116)
by MGrimby 07 May '25

07 May '25

4 5

[kamailio/kamailio] Memory usage increases everytime tls.reload is executed (Issue #3823)
by Sebastian Denz 06 May '25

06 May '25

### Description We are using Kamailio 5.7.4 on Debian 12 (from http://deb.kamailio.org/kamailio57) with rtpengine as an Edgeproxy for our clients. The instance terminates SIP/TLS (with Cliencertificates) and forwards the SIP Traffic to internal systems. After some days we are getting errors like this `tls_complete_init(): tls: ssl bug #1491 workaround: not enough memory for safe operation: shm=7318616 threshold1=8912896` First we thought Kamailio just doesnt have enough memory, so we doubled it.. But after some days the Logmessage (and Userissues) occured again. So we monitored the shmmem statistics and found that used and max_used are constantly growing til it reaches the limit. As i mentioned we are using client-certificates and so we are also using the CRL feature. We do have a systemd-timer which fetches the CRL every hour and runs 'kamcmd tls.reload' when finished. Our tls.cfg looks like this: ``` [server:default] method = TLSv1.2+ private_key = /etc/letsencrypt/live/hostname.de/privkey.pem certificate = /etc/letsencrypt/live/hostname.de/fullchain.pem ca_list = /etc/kamailio/ca_list.pem ca_path = /etc/kamailio/ca_list.pem crl = /etc/kamailio/combined.crl.pem verify_certificate = yes require_certificate = yes [client:default] verify_certificate = yes require_certificate = yes ``` After testing a bit we found that every time tls.reload is executed Kamailio consumes a bit more memory which eventually leads to all the memory being consumed which leads to issues for our users. See following example: ``` [0][root@edgar-dev:~]# while true ; do /usr/sbin/kamcmd tls.reload ; /usr/sbin/kamcmd core.shmmem ; sleep 1 ; done Ok. TLS configuration reloaded. { total: 268435456 free: 223001520 used: 41352552 real_used: 45433936 max_used: 45445968 fragments: 73 } Ok. TLS configuration reloaded. { total: 268435456 free: 222377960 used: 41975592 real_used: 46057496 max_used: 46069232 fragments: 78 } Ok. TLS configuration reloaded. { total: 268435456 free: 221748664 used: 42604992 real_used: 46686792 max_used: 46698080 fragments: 77 } Ok. TLS configuration reloaded. { total: 268435456 free: 221110832 used: 43242408 real_used: 47324624 max_used: 47335608 fragments: 81 } ^C [130][root@edgar-dev:~]# ``` ### Troubleshooting #### Reproduction Everytime tls.reload is called the memory consumptions grows.. #### Debugging Data  ``` If you let me know what would be interesting for tracking this down, i am happy to provide logs/debugging data! ``` #### Log Messages  ``` If you let me know what would be interesting for tracking this down, i am happy to provide logs/debugging data! ``` #### SIP Traffic SIP doesnt seem to be relevant here ### Possible Solutions Calling tls.reload less often or restart kamailio before memory is consumed ;) ### Additional Information ``` version: kamailio 5.7.4 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, MEM_JOIN_FREE, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 12.2.0 ``` * **Operating System**: ``` * Debian GNU/Linux 12 (bookworm) * Linux edgar-dev 6.1.0-20-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.85-1 (2024-04-11) x86_64 GNU/Linux ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3823 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3823(a)github.com>

9 31

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev January 2025