- sr-dev - kamailio.org

[kamailio/kamailio] Errormessage TLS read:error:0D0E10DF:asn1 encoding routines:asn1_get_uint64:too large (Issue #3168)
by MartinPalmAGDS 04 Jul '22

04 Jul '22

We use Kamilio as a proxy server to connect softphones to our PBX systems. We have run into some TLS problems. These problems result in a shut down of the TLS connection after the error is encountered. We have looked into serial numbers of certificates. The current code in kamailio seems to be broken due to changes in the world around... many certificates today do not adhere to the previously assumed behaviour of certificate serial numbers anymore. The error which causes the connection to drop seems to be related to a comparison of the certificate serial numbers during renegotiation. tls_err_ret(): TLS read:error:0D0E10DF:asn1 encoding routines:asn1_get_uint64:too large Kamailio expects serial numbers to fit in a 64 bit unsigned, however during the last years, starting around 2003 more and more systems use automatically generated serial numbers, which are frequently 128 bit long. The serialnumber of our own Auerswald root certificate looks to be only 64 bit long, but during the negotiation is presented as 9 bytes starting with 00h, which is interpreted as a 72bit value. Trying to put this serial number in a 64 bit long kills the connection. Due to the different ways that are used to generate serial numbers now, there is no simple algorithm to condense the number into a 64bit value, and the whole number should be compared to see if it is same or higher. We currently have disabled renegotiation to avoid the connection being dropped during renegotiation. Which however can lead to the connection being dropped by the other side during renegotiation, but this is not a good permanent workaround! #### Reproduction This issue happens infrequently ### Possible Solutions No workaround possible on our side ### Additional Information Kamailio Version 5.5.4 LibSSL 1.1.1.n * **Operating System**: Linux, Debian oldstable -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3168 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3168(a)github.com>

3 3

[kamailio/kamailio] tls: cert serial number can exceed uint64 (PR #3171)
by space88man 04 Jul '22

04 Jul '22

#### Pre-Submission Checklist    - [X] Commit message has the format required by CONTRIBUTING guide - [X] Commits are split per component (core, individual modules, libs, utils, ...) - [X] Each component has a single commit (if not, squash them into one commit) - [X] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [X] Breaking change (fix or feature that would change existing functionality) #### Checklist: - [X] PR should be backported to stable branches - [X] Tested changes locally - [X] Related to issue #3168 #### Description Certificate serial numbers can be large integers (> 2^64). Parse then as BIGNUM and store the string in pv; we cannot store as integer anymore. The original code handles 2^64 with a static buffer of 19. We upsize to 2^256 with a static buffer of 80. May break configurations that try to extract the sn pv as an integer (does anyone actually do this?) Addresses #3168. You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/3171 -- Commit Summary -- * tls: cert serial number can exceed uint64 -- File Changes -- M src/modules/tls/tls_select.c (24) -- Patch Links -- https://github.com/kamailio/kamailio/pull/3171.patch https://github.com/kamailio/kamailio/pull/3171.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/3171 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/3171(a)github.com>

2 10

git:master:996bf4ca: tls: cert serial number can exceed uint64
by Daniel-Constantin Mierla 04 Jul '22

04 Jul '22

Module: kamailio Branch: master Commit: 996bf4cad1d5645761fb80e66e435cedf29fa749 URL: https://github.com/kamailio/kamailio/commit/996bf4cad1d5645761fb80e66e435ce… Author: S-P Chan <shihping.chan(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2022-07-04T12:42:56+02:00 tls: cert serial number can exceed uint64 - GH #3168 --- Modified: src/modules/tls/tls_select.c --- Diff: https://github.com/kamailio/kamailio/commit/996bf4cad1d5645761fb80e66e435ce… Patch: https://github.com/kamailio/kamailio/commit/996bf4cad1d5645761fb80e66e435ce… --- diff --git a/src/modules/tls/tls_select.c b/src/modules/tls/tls_select.c index 985e6dcec1..9e597c1d78 100644 --- a/src/modules/tls/tls_select.c +++ b/src/modules/tls/tls_select.c @@ -630,24 +630,35 @@ static int pv_validity(sip_msg_t* msg, pv_param_t* param, pv_value_t* res) } -static int get_sn(str* res, int* ires, int local, sip_msg_t* msg) +static int get_sn(str* res, int local, sip_msg_t* msg) { - static char buf[INT2STR_MAX_LEN]; + static char buf[80]; // handle 256-bit > log(2^256,10) X509* cert; struct tcp_connection* c; - char* sn; - int num; + char* sn = NULL; + BIGNUM* bn = NULL; if (get_cert(&cert, &c, msg, local) < 0) return -1; - num = ASN1_INTEGER_get(X509_get_serialNumber(cert)); - sn = int2str(num, &res->len); + if (!(bn = BN_new())) goto error; + if (!ASN1_INTEGER_to_BN(X509_get_serialNumber(cert), bn)) goto error; + if (!(sn = BN_bn2dec(bn)) || strlen(sn) > 80) goto error; + + res->len = strlen(sn); memcpy(buf, sn, res->len); res->s = buf; - if (ires) *ires = num; + if (!local) X509_free(cert); tcpconn_put(c); + + BN_free(bn); + OPENSSL_free(sn); return 0; + + error: + if (sn) OPENSSL_free(sn); + if (bn) BN_free(bn); + return -1; } static int sel_sn(str* res, select_t* s, sip_msg_t* msg) @@ -662,7 +673,7 @@ static int sel_sn(str* res, select_t* s, sip_msg_t* msg) return -1; } - return get_sn(res, NULL, local, msg); + return get_sn(res, local, msg); } @@ -679,11 +690,11 @@ static int pv_sn(sip_msg_t* msg, pv_param_t* param, pv_value_t* res) return pv_get_null(msg, param, res); } - if (get_sn(&res->rs, &res->ri, local, msg) < 0) { + if (get_sn(&res->rs, local, msg) < 0) { return pv_get_null(msg, param, res); } - res->flags = PV_VAL_STR | PV_VAL_INT; + res->flags = PV_VAL_STR; return 0; }

1 0

git:5.6:09e9fa84: modules: readme files regenerated - modules ... [skip ci]
by Kamailio Dev 04 Jul '22

04 Jul '22

Module: kamailio Branch: 5.6 Commit: 09e9fa84bc550411c1840e5af325407ba4e25a7c URL: https://github.com/kamailio/kamailio/commit/09e9fa84bc550411c1840e5af325407… Author: Kamailio Dev <kamailio.dev(a)kamailio.org> Committer: Kamailio Dev <kamailio.dev(a)kamailio.org> Date: 2022-07-04T11:01:46+02:00 modules: readme files regenerated - modules ... [skip ci] --- Modified: src/modules/nats/README --- Diff: https://github.com/kamailio/kamailio/commit/09e9fa84bc550411c1840e5af325407… Patch: https://github.com/kamailio/kamailio/commit/09e9fa84bc550411c1840e5af325407… --- diff --git a/src/modules/nats/README b/src/modules/nats/README index f7f1ad7239..29cef171b7 100644 --- a/src/modules/nats/README +++ b/src/modules/nats/README @@ -35,6 +35,7 @@ Emmanuel Schmidbauer 4.1. nats_url (str) 4.2. num_publish_workers (int) 4.3. subject_queue_group (str) + 4.4. event_callback (str) 5. Functions @@ -48,9 +49,10 @@ Emmanuel Schmidbauer 1.1. Set nats_url parameter 1.2. Set num_publish_workers parameter 1.3. Set subject_queue_group parameter - 1.4. nats_publish usage - 1.5. Example usage of $natsData pseudo variable - 1.6. Define the event routes + 1.4. Set event_callback parameter + 1.5. nats_publish usage + 1.6. Example usage of $natsData pseudo variable + 1.7. Define the event routes Chapter 1. Admin Guide @@ -68,6 +70,7 @@ Chapter 1. Admin Guide 4.1. nats_url (str) 4.2. num_publish_workers (int) 4.3. subject_queue_group (str) + 4.4. event_callback (str) 5. Functions @@ -115,6 +118,7 @@ Chapter 1. Admin Guide 4.1. nats_url (str) 4.2. num_publish_workers (int) 4.3. subject_queue_group (str) + 4.4. event_callback (str) 4.1. nats_url (str) @@ -161,6 +165,24 @@ modparam("nats", "subject_queue_group", "MyQueue1:2021") modparam("nats", "subject_queue_group", "MyQueue2:2021") ... +4.4. event_callback (str) + + Name of the KEMI function to be executed instead of the event route. + + Default value is not set. + + Example 1.4. Set event_callback parameter +... +modparam("nats", "event_callback", "ksr_nats_event") + +-- event callback function implemented in Lua +function ksr_nats_event(evname) + KSR.info("===== nats module received event: " .. evname .. + ", data:" .. KSR.pv.gete('$natsData') .. "\n"); + return 1; +end +... + 5. Functions 5.1. nats_publish(subject, payload) @@ -169,7 +191,7 @@ modparam("nats", "subject_queue_group", "MyQueue2:2021") Publishes the payload to subject. - Example 1.4. nats_publish usage + Example 1.5. nats_publish usage ... $var(my_info) = "$ci=" + $ci + " $fU=" + $fU; nats_publish("mysubject", "$var(my_info)"); # publish $var(my_info) to "mysubjec @@ -178,7 +200,7 @@ t" 6. Pseudo Variables - Example 1.5. Example usage of $natsData pseudo variable + Example 1.6. Example usage of $natsData pseudo variable ... xlog("L_INFO", "received payload $natsData"); } @@ -191,7 +213,7 @@ t" received payload. The name of the event-route name must match the subject of the message. - Example 1.6. Define the event routes + Example 1.7. Define the event routes ... modparam("nats", "subject_queue_group", "Kamailio-World:2021") modparam("nats", "subject_queue_group", "MyQueue1:2021")

1 0

git:5.6:11a191e8: siptrace: lookup socket by name if not set for hep
by Daniel-Constantin Mierla 04 Jul '22

04 Jul '22

Module: kamailio Branch: 5.6 Commit: 11a191e837821c535832382ce9f0ed244e4d66b9 URL: https://github.com/kamailio/kamailio/commit/11a191e837821c535832382ce9f0ed2… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2022-07-04T10:36:01+02:00 siptrace: lookup socket by name if not set for hep - GH #3174 (cherry picked from commit 66f175f40e6145e895fa22952b40b372e4eff381) --- Modified: src/modules/siptrace/siptrace_hep.c --- Diff: https://github.com/kamailio/kamailio/commit/11a191e837821c535832382ce9f0ed2… Patch: https://github.com/kamailio/kamailio/commit/11a191e837821c535832382ce9f0ed2… --- diff --git a/src/modules/siptrace/siptrace_hep.c b/src/modules/siptrace/siptrace_hep.c index 412eb8abdc6..6a4fa1f25e4 100644 --- a/src/modules/siptrace/siptrace_hep.c +++ b/src/modules/siptrace/siptrace_hep.c @@ -588,6 +588,9 @@ int hlog(struct sip_msg *msg, str *correlationid, str *message) pkg_free(p); if(trace_send_sock_name_str.s) { + if(!trace_send_sock_info) { + trace_send_sock_info = ksr_get_socket_by_name(&trace_send_sock_name_str); + } dst.send_sock = trace_send_sock_info; } else if(trace_send_sock_str.s) { LM_DBG("send sock activated - find the sock info\n");

1 0

git:5.6:3839eed2: auth: coherent log message content with header parsing
by Daniel-Constantin Mierla 04 Jul '22

04 Jul '22

Module: kamailio Branch: 5.6 Commit: 3839eed219ab2da2e441cdfb82adbba24b03c035 URL: https://github.com/kamailio/kamailio/commit/3839eed219ab2da2e441cdfb82adbba… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2022-07-04T10:36:13+02:00 auth: coherent log message content with header parsing (cherry picked from commit 267d4ad48ac8426b3d5c53724281605a74d07999) --- Modified: src/modules/auth/auth_mod.c --- Diff: https://github.com/kamailio/kamailio/commit/3839eed219ab2da2e441cdfb82adbba… Patch: https://github.com/kamailio/kamailio/commit/3839eed219ab2da2e441cdfb82adbba… --- diff --git a/src/modules/auth/auth_mod.c b/src/modules/auth/auth_mod.c index cc16643eb49..53e02f21056 100644 --- a/src/modules/auth/auth_mod.c +++ b/src/modules/auth/auth_mod.c @@ -450,12 +450,12 @@ int ki_has_credentials(sip_msg_t *msg, str* srealm) ret = find_credentials(msg, srealm, HDR_PROXYAUTH_T, &hdr); if(ret==0) { - LM_DBG("found www credentials with realm [%.*s]\n", srealm->len, srealm->s); + LM_DBG("found proxy credentials with realm [%.*s]\n", srealm->len, srealm->s); return 1; } ret = find_credentials(msg, srealm, HDR_AUTHORIZATION_T, &hdr); if(ret==0) { - LM_DBG("found proxy credentials with realm [%.*s]\n", srealm->len, srealm->s); + LM_DBG("found www credentials with realm [%.*s]\n", srealm->len, srealm->s); return 1; }

1 0

git:5.6:bdd1c561: core: init pv buffers earlier to be avaialble for cli params
by Daniel-Constantin Mierla 04 Jul '22

04 Jul '22

Module: kamailio Branch: 5.6 Commit: bdd1c561ed640bc79a270532ed70346c5478001f URL: https://github.com/kamailio/kamailio/commit/bdd1c561ed640bc79a270532ed70346… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2022-07-04T10:35:38+02:00 core: init pv buffers earlier to be avaialble for cli params - GH #3152 (cherry picked from commit a78adb5340ae6cb57f756189d070c32c49bfa426) --- Modified: src/main.c --- Diff: https://github.com/kamailio/kamailio/commit/bdd1c561ed640bc79a270532ed70346… Patch: https://github.com/kamailio/kamailio/commit/bdd1c561ed640bc79a270532ed70346… --- diff --git a/src/main.c b/src/main.c index cb0c92e357..4ee5afe9d0 100644 --- a/src/main.c +++ b/src/main.c @@ -2172,6 +2172,10 @@ int main(int argc, char** argv) init_tcp_options(); /* set the defaults before the config */ #endif + if (pv_init_buffer()<0) { + goto error; + } + pp_define_core(); /* process command line (cfg. file path etc) */

1 0

git:5.6:d83ec54b: kamctl: propagate DB_PATH to DBTEXT_PATH
by Daniel-Constantin Mierla 04 Jul '22

04 Jul '22

Module: kamailio Branch: 5.6 Commit: d83ec54bfc13ac1ddc5a6d39dfaa4f3313d976a9 URL: https://github.com/kamailio/kamailio/commit/d83ec54bfc13ac1ddc5a6d39dfaa4f3… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2022-07-04T10:35:48+02:00 kamctl: propagate DB_PATH to DBTEXT_PATH - GH #3170 (cherry picked from commit 1f6ec9022f2358441233e8b139e13cbdcf0947aa) --- Modified: utils/kamctl/kamctl.dbtext --- Diff: https://github.com/kamailio/kamailio/commit/d83ec54bfc13ac1ddc5a6d39dfaa4f3… Patch: https://github.com/kamailio/kamailio/commit/d83ec54bfc13ac1ddc5a6d39dfaa4f3… --- diff --git a/utils/kamctl/kamctl.dbtext b/utils/kamctl/kamctl.dbtext index 2198d30db2..0e5f9c424a 100644 --- a/utils/kamctl/kamctl.dbtext +++ b/utils/kamctl/kamctl.dbtext @@ -19,7 +19,11 @@ fi; # path to the dbtext database if [ -z "$DBTEXT_PATH" ] ; then - DBTEXT_PATH="/usr/local/share/kamailio/dbtext/kamailio" + if [ -z "$DB_PATH" ] ; then + DBTEXT_PATH="/usr/local/share/kamailio/dbtext/kamailio" + else + DBTEXT_PATH=$DB_PATH + fi fi export DBTEXT_PATH

1 0

git:5.6:0ac60f61: nats: add KEMI publish function and event_callback param (#3154)
by Daniel-Constantin Mierla 04 Jul '22

04 Jul '22

Module: kamailio Branch: 5.6 Commit: 0ac60f613674cd686e80aa3ab87a17bcc97ef44f URL: https://github.com/kamailio/kamailio/commit/0ac60f613674cd686e80aa3ab87a17b… Author: Seven Du <dujinfang(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2022-07-04T10:35:06+02:00 nats: add KEMI publish function and event_callback param (#3154) (cherry picked from commit 25d42b7e69cc6242c66887a2816499d841e3ba89) --- Modified: src/modules/nats/defs.h Modified: src/modules/nats/doc/nats_admin.xml Modified: src/modules/nats/nats_mod.c Modified: src/modules/nats/nats_mod.h Modified: src/modules/nats/nats_pub.c Modified: src/modules/nats/nats_pub.h --- Diff: https://github.com/kamailio/kamailio/commit/0ac60f613674cd686e80aa3ab87a17b… Patch: https://github.com/kamailio/kamailio/commit/0ac60f613674cd686e80aa3ab87a17b…

1 0

git:5.6:73ff08bc: ipops: added fixup free functions and use of ANY_ROUTE
by Daniel-Constantin Mierla 04 Jul '22

04 Jul '22

Module: kamailio Branch: 5.6 Commit: 73ff08bc5aada525017766121342676058507638 URL: https://github.com/kamailio/kamailio/commit/73ff08bc5aada525017766121342676… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2022-07-04T10:35:23+02:00 ipops: added fixup free functions and use of ANY_ROUTE (cherry picked from commit fa6a2d79aca3bc4733276ce99a53efd8fe63ffd5) --- Modified: src/modules/ipops/ipops_mod.c --- Diff: https://github.com/kamailio/kamailio/commit/73ff08bc5aada525017766121342676… Patch: https://github.com/kamailio/kamailio/commit/73ff08bc5aada525017766121342676…

1 0

git:5.6:272649c1: nats: fix the nats:connected event_route not being triggered on a successful connect
by Daniel-Constantin Mierla 04 Jul '22

04 Jul '22

Module: kamailio Branch: 5.6 Commit: 272649c1c4b718067abc776186529b0e0c40e363 URL: https://github.com/kamailio/kamailio/commit/272649c1c4b718067abc776186529b0… Author: Seven Du <dujinfang(a)x-y-t.cn> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2022-07-04T10:33:56+02:00 nats: fix the nats:connected event_route not being triggered on a successful connect (cherry picked from commit b3c8329cfbfa19613dfbadaea7f220443dbb7f55) --- Modified: src/modules/nats/nats_mod.c --- Diff: https://github.com/kamailio/kamailio/commit/272649c1c4b718067abc776186529b0… Patch: https://github.com/kamailio/kamailio/commit/272649c1c4b718067abc776186529b0… --- diff --git a/src/modules/nats/nats_mod.c b/src/modules/nats/nats_mod.c index 2a53beda82f..6108d555e81 100644 --- a/src/modules/nats/nats_mod.c +++ b/src/modules/nats/nats_mod.c @@ -298,7 +298,10 @@ int _nats_pub_worker_proc( != NATS_OK) { LM_ERR("could not connect to nats servers [%s]\n", natsStatus_GetText(s)); + } else { + connectedCB(worker->nc->conn, NULL); } + s = natsOptions_SetEventLoop(worker->nc->opts, (void *)worker->uvLoop, natsLibuv_Attach, natsLibuv_Read, natsLibuv_Write, natsLibuv_Detach);

1 0

[kamailio/kamailio] presence: be more resilient doing clean up of presentity values (PR #3169)
by Victor Seva 04 Jul '22

04 Jul '22

#### Pre-Submission Checklist    - [x] Commit message has the format required by CONTRIBUTING guide - [x] Commits are split per component (core, individual modules, libs, utils, ...) - [x] Each component has a single commit (if not, squash them into one commit) - [x] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [x] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [x] PR should be backported to stable branches - [x] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description previously if an error was found we were bailing out and the value was kept so at next round the value will be there and no more values where removed You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/3169 -- Commit Summary -- * presence: be more resilient doing clean up of presentity values -- File Changes -- M src/modules/presence/publish.c (47) -- Patch Links -- https://github.com/kamailio/kamailio/pull/3169.patch https://github.com/kamailio/kamailio/pull/3169.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/3169 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/3169(a)github.com>

2 4

git:master:444adb0b: presence: be more resilient doing clean up of presentity values
by Victor Seva 04 Jul '22

04 Jul '22

Module: kamailio Branch: master Commit: 444adb0b27d62fbd2af25e4f555b6aab5ca7bc96 URL: https://github.com/kamailio/kamailio/commit/444adb0b27d62fbd2af25e4f555b6aa… Author: Victor Seva <vseva(a)sipwise.com> Committer: Victor Seva <linuxmaniac(a)torreviejawireless.org> Date: 2022-07-04T10:20:49+02:00 presence: be more resilient doing clean up of presentity values previously if an error was found we were bailing out and the value was kept so at next round the value will be there and no more values where removed --- Modified: src/modules/presence/publish.c --- Diff: https://github.com/kamailio/kamailio/commit/444adb0b27d62fbd2af25e4f555b6aa… Patch: https://github.com/kamailio/kamailio/commit/444adb0b27d62fbd2af25e4f555b6aa…

1 0

git:master:267d4ad4: auth: coherent log message content with header parsing
by Daniel-Constantin Mierla 04 Jul '22

04 Jul '22

Module: kamailio Branch: master Commit: 267d4ad48ac8426b3d5c53724281605a74d07999 URL: https://github.com/kamailio/kamailio/commit/267d4ad48ac8426b3d5c53724281605… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2022-07-04T10:04:47+02:00 auth: coherent log message content with header parsing --- Modified: src/modules/auth/auth_mod.c --- Diff: https://github.com/kamailio/kamailio/commit/267d4ad48ac8426b3d5c53724281605… Patch: https://github.com/kamailio/kamailio/commit/267d4ad48ac8426b3d5c53724281605… --- diff --git a/src/modules/auth/auth_mod.c b/src/modules/auth/auth_mod.c index 6f7639619a..3a05689f00 100644 --- a/src/modules/auth/auth_mod.c +++ b/src/modules/auth/auth_mod.c @@ -450,12 +450,12 @@ int ki_has_credentials(sip_msg_t *msg, str* srealm) ret = find_credentials(msg, srealm, HDR_PROXYAUTH_T, &hdr); if(ret==0) { - LM_DBG("found www credentials with realm [%.*s]\n", srealm->len, srealm->s); + LM_DBG("found proxy credentials with realm [%.*s]\n", srealm->len, srealm->s); return 1; } ret = find_credentials(msg, srealm, HDR_AUTHORIZATION_T, &hdr); if(ret==0) { - LM_DBG("found proxy credentials with realm [%.*s]\n", srealm->len, srealm->s); + LM_DBG("found www credentials with realm [%.*s]\n", srealm->len, srealm->s); return 1; }

1 0

git:master:bb1a8069: github: use different file to define PR checks [skip ci]
by Victor Seva 04 Jul '22

04 Jul '22

Module: kamailio Branch: master Commit: bb1a80695825a607bfc713dab22b6edb369e8351 URL: https://github.com/kamailio/kamailio/commit/bb1a80695825a607bfc713dab22b6ed… Author: Victor Seva <linuxmaniac(a)torreviejawireless.org> Committer: Victor Seva <linuxmaniac(a)torreviejawireless.org> Date: 2022-07-04T09:26:43+02:00 github: use different file to define PR checks [skip ci] --- Added: .github/workflows/pull_request.yml Modified: .github/workflows/main.yml --- Diff: https://github.com/kamailio/kamailio/commit/bb1a80695825a607bfc713dab22b6ed… Patch: https://github.com/kamailio/kamailio/commit/bb1a80695825a607bfc713dab22b6ed… --- diff --git a/.github/workflows/main.yml b/.github/workflows/main.yml index 44f18e0f08..8704cda5e8 100644 --- a/.github/workflows/main.yml +++ b/.github/workflows/main.yml @@ -6,9 +6,6 @@ name: build - master - '5.6' - '5.5' - pull_request: - branches: - - master # Allows you to run this workflow manually from the Actions tab workflow_dispatch: jobs: diff --git a/.github/workflows/pull_request.yml b/.github/workflows/pull_request.yml new file mode 100644 index 0000000000..2633e7e29e --- /dev/null +++ b/.github/workflows/pull_request.yml @@ -0,0 +1,33 @@ +--- +name: checks_pr +'on': + pull_request: + branches: + - master + # Allows you to run this workflow manually from the Actions tab + workflow_dispatch: +jobs: + build: + runs-on: ubuntu-latest + container: + image: kamailio/pkg-kamailio-docker:master-${{ matrix.distribution }} + volumes: + - ${{ github.workspace }}:/code + env: + DIST: ${{ matrix.distribution }} + CC: ${{ matrix.compilier }} + strategy: + matrix: + include: + - distribution: bullseye + compilier: gcc + - distribution: bullseye + compilier: clang + steps: + - uses: actions/checkout@v2 + - uses: ammaraskar/gcc-problem-matcher(a)0.1 + - name: build + run: | + cd /code + ./test/travis/build_travis.sh + shell: bash

1 0

Build failed in Jenkins: kamailiodev-nightly-repos » amd64,jammy,master #2061
by kamailio＠sipwise.com 02 Jul '22

02 Jul '22

See <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> Changes: ------------------------------------------ [...truncated 4.35 KB...] + mkdir -p /srv/repository/kamailiodev-nightly/conf ++ id -un + chown jenkins /srv/repository/kamailiodev-nightly/conf + touch /srv/repository/kamailiodev-nightly/conf/distributions + '[' -z 508EA4C8 ']' ++ id -un + flock --timeout 5 9 + grep -q '^$Codename\|Suite$: jammy$' /srv/repository/kamailiodev-nightly/conf/distributions + cat + '[' -n '' ']' + '[' -n '' ']' + '[' -n '' ']' + '[' -n '' ']' + '[' -n main ']' + printf 'UDebComponents: main\n' + printf 'Tracking: minimal\n' + '[' -n 508EA4C8 ']' + echo '*** Signing repository with Key ID 508EA4C8 ***' *** Signing repository with Key ID 508EA4C8 *** + printf 'SignWith: 508EA4C8\n' + echo 'Added jammy as new codename/repos to the reprepro configuration.' Added jammy as new codename/repos to the reprepro configuration. ++ id -un + rm -f /var/lock/jdg-generate-reprepro-codename.jenkins + set -u + umask 022 + PATH=/bin:/sbin:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin + export QEMU_RESERVED_VA=0x0 + QEMU_RESERVED_VA=0x0 + export TERM=dumb + TERM=dumb ++ date + echo '*** Starting /usr/bin/build-and-provide-package at Fri Jul 1 01:34:17 UTC 2022 ***' *** Starting /usr/bin/build-and-provide-package at Fri Jul 1 01:34:17 UTC 2022 *** ++ sed -e 's/^$[0-9]*$.*/\1/' + start_seconds=13255574 ++ awk '/^ii/ {print $3}' ++ dpkg --list jenkins-debian-glue + JENKINS_DEBIAN_GLUE_VERSION=0.21.0+0~20220603135157.361~1.gbp4b90f6 + '[' -n 0.21.0+0~20220603135157.361~1.gbp4b90f6 ']' + echo '*** Running jenkins-debian-glue version 0.21.0+0~20220603135157.361~1.gbp4b90f6 ***' *** Running jenkins-debian-glue version 0.21.0+0~20220603135157.361~1.gbp4b90f6 *** ++ dpkg --print-architecture + HOST_ARCH=amd64 + '[' -n amd64 ']' + echo '*** Identified host architecture amd64 ***' *** Identified host architecture amd64 *** + trap bailout SIGHUP SIGINT SIGQUIT SIGABRT SIGALRM SIGTERM + checks_and_defaults + '[' -z /srv/repository/kamailiodev-nightly ']' + local repository_is_missing_in_env=false + '[' -r /etc/jenkins/debian_glue ']' + . /etc/jenkins/debian_glue ++ PBUILDER_CONFIG=/etc/jenkins/pbuilderrc ++ KEY_ID=508EA4C8 + '[' -n /srv/repository/kamailiodev-nightly ']' + false + '[' -n '' ']' + '[' -z kamailiodev-nightly-repos/architecture=amd64,distribution=jammy,label=master ']' + '[' -z amd64 ']' + set_debootstrap + '[' -n '' ']' + '[' amd64 = amd64 ']' + DEBOOTSTRAP=debootstrap + return 0 + '[' -z '' ']' + REPREPRO_OPTS='-v --waitforlock 1000' + echo '*** REPREPRO_OPTS is unset, using default: -v --waitforlock 1000 ***' *** REPREPRO_OPTS is unset, using default: -v --waitforlock 1000 *** + REPREPRO_CMD=reprepro + '[' -z '' ']' + DEFAULT_REPOSITORY=/srv/repository + '[' -z /srv/repository/kamailiodev-nightly ']' + '[' -z '' ']' + PBUILDER_HOOKDIR=/usr/share/jenkins-debian-glue/pbuilder-hookdir/ + '[' -z '' ']' + '[' -z '' ']' + FREIGHT_VARLIB=/var/lib/freight + FREIGHT_VARCACHE=/var/cache/freight + FREIGHT_CONF=/etc/freight.conf + '[' '' = true ']' + clean_workspace ++ pwd + echo '*** The following files have been noticed in the workspace [<https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…]>: ***' *** The following files have been noticed in the workspace [<https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…]>: *** + ls -la ./ total 20 drwxr-xr-x 3 jenkins jenkins 4096 Jul 1 01:34 . drwxr-xr-x 3 jenkins jenkins 4096 Jul 1 01:34 .. drwxr-xr-x 2 jenkins jenkins 12288 Jul 1 01:34 binaries + identify_package_name + PACKAGE=kamailiodev-nightly + PACKAGE=kamailiodev-nightly + '[' -n kamailiodev-nightly ']' + echo '*** Identified Debian package name kamailiodev-nightly ***' *** Identified Debian package name kamailiodev-nightly *** + set_base_path + '[' -n binaries/ ']' + echo '*** Using provided binaries/ as BASE_PATH ***' *** Using provided binaries/ as BASE_PATH *** + build_info + '[' -n jammy ']' + echo '*** Using supplied repository name jammy ***' *** Using supplied repository name jammy *** + identify_sourcefile + '[' -n '' ']' + echo '*** Identifying newest package version ***' *** Identifying newest package version *** + newest_version= + for file in "${BASE_PATH}/"*.dsc ++ awk '/^Source: / {print $2}' binaries//kamailio_5.7.0~dev0+ubuntu22.04.20220701005455.2245.dsc + SOURCE_PACKAGE=kamailio ++ basename binaries//kamailio_5.7.0~dev0+ubuntu22.04.20220701005455.2245.dsc .dsc + p=kamailio_5.7.0~dev0+ubuntu22.04.20220701005455.2245 + '[' kamailio_5.7.0~dev0+ubuntu22.04.20220701005455.2245 = '*' ']' + cur_version=5.7.0~dev0+ubuntu22.04.20220701005455.2245 + '[' -z '' ']' + newest_version=5.7.0~dev0+ubuntu22.04.20220701005455.2245 + echo '*** Found package version 5.7.0~dev0+ubuntu22.04.20220701005455.2245 ***' *** Found package version 5.7.0~dev0+ubuntu22.04.20220701005455.2245 *** + sourcefile='binaries//kamailio_*5.7.0~dev0+ubuntu22.04.20220701005455.2245.dsc' + echo '*** Using binaries//kamailio_*5.7.0~dev0+ubuntu22.04.20220701005455.2245.dsc (version: 5.7.0~dev0+ubuntu22.04.20220701005455.2245)' *** Using binaries//kamailio_*5.7.0~dev0+ubuntu22.04.20220701005455.2245.dsc (version: 5.7.0~dev0+ubuntu22.04.20220701005455.2245) + dist_and_arch_settings + '[' -z amd64 ']' + '[' amd64 = all ']' + arch=amd64 + echo '*** architecture is set to amd64 ***' *** architecture is set to amd64 *** + '[' -n jammy ']' + local DIST=jammy + '[' -n '' ']' + echo '*** Using cowbuilder base for distribution jammy ***' *** Using cowbuilder base for distribution jammy *** + COWBUILDER_DIST=jammy + '[' -n '' ']' + COWBUILDER_BASE=/var/cache/pbuilder/base-jammy-amd64.cow + echo '*** No COWBUILDER_BASE set, using /var/cache/pbuilder/base-jammy-amd64.cow as cowbuilder base.cow ***' *** No COWBUILDER_BASE set, using /var/cache/pbuilder/base-jammy-amd64.cow as cowbuilder base.cow *** + local lockfiles=/run/lock/jammy-amd64 + build_lockfile=/run/lock/jammy-amd64.building.2588 + update_lockfile=/run/lock/jammy-amd64.update + update_lockfile_pid=/run/lock/jammy-amd64.update.2588 + '[' -n true ']' + echo '*** Config variable '\''PROVIDE_ONLY'\'' is set, ignoring request to run cowbuilder. ***' *** Config variable 'PROVIDE_ONLY' is set, ignoring request to run cowbuilder. *** + '[' -n '' ']' + deploy_to_releases + '[' -n '' ']' + '[' -n '' ']' + '[' -n '' ']' + '[' -n '' ']' + reprepro_wrapper + '[' -n '' ']' + '[' -d /srv/repository/kamailiodev-nightly ']' + '[' -r /srv/repository/kamailiodev-nightly/conf/distributions ']' + grep -q '^$Codename\|Suite$: jammy$' /srv/repository/kamailiodev-nightly/conf/distributions + remove_packages + '[' -n true ']' + echo '*** Skipping removal of existing packages as requested via SKIP_REMOVAL ***' *** Skipping removal of existing packages as requested via SKIP_REMOVAL *** + return 0 + remove_missing_binary_packages + '[' -n true ']' + echo '*** Skipping removal of existing packages as requested via SKIP_MISSING_BINARY_REMOVAL or SKIP_REMOVAL ***' *** Skipping removal of existing packages as requested via SKIP_MISSING_BINARY_REMOVAL or SKIP_REMOVAL *** + return 0 + echo '*** Including packages in repository jammy ***' *** Including packages in repository jammy *** ++ get_arch_changes ++ case ${architecture} in ++ echo amd64 + reprepro -b /srv/repository/kamailiodev-nightly -v --waitforlock 1000 --ignore=wrongdistribution --ignore=uploaders --ignore=surprisingbinary include jammy <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> Could not find a suitable control.tar file within '/srv/repository/kamailiodev-nightly/pool/main/k/kamailio/kamailio_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb'! Deleting files just added to the pool but not used. (to avoid use --keepunusednewfiles next time) deleting and forgetting pool/main/k/kamailio/kamailio-autheph-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-berkeley-bin_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-berkeley-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-cnxcc-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-cpl-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-dbg_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-erlang-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-extra-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-geoip-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-geoip2-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-ims-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-json-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-kazoo-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-ldap-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-lua-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-lwsc-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-memcached-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-mongodb-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-mono-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-mqtt-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-mysql-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-nats-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-nth_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-outbound-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-perl-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-phonenum-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-postgres-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-presence-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-python3-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-rabbitmq-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-radius-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-redis-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-ruby-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting There have been errors! and forgetting pool/main/k/kamailio/kamailio-sctp-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-secsipid-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-snmpstats-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-sqlite-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-systemd-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-tls-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-unixodbc-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-utils-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-websocket-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-xml-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio-xmpp-modules_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb deleting and forgetting pool/main/k/kamailio/kamailio_5.7.0~dev0+ubuntu22.04.20220701005455.2245.dsc deleting and forgetting pool/main/k/kamailio/kamailio_5.7.0~dev0+ubuntu22.04.20220701005455.2245.tar.xz deleting and forgetting pool/main/k/kamailio/kamailio_5.7.0~dev0+ubuntu22.04.20220701005455.2245_amd64.deb + '[' 249 -eq 0 ']' + bailout 1 'Error: Failed to include binary package in jammy repository.' + '[' -n 1 ']' + EXIT=1 + '[' -n 'Error: Failed to include binary package in jammy repository.' ']' + echo 'Error: Failed to include binary package in jammy repository.' Error: Failed to include binary package in jammy repository. + rm -f /run/lock/jammy-amd64.building.2588 + '[' -r /run/lock/jammy-amd64.update.2588 ']' + '[' '' = true ']' + echo '*** Getting rid of files in <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> to avoid problems in next run. ***' *** Getting rid of files in <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> to avoid problems in next run. *** + rm -f <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> <https://kamailio.sipwise.com/job/kamailiodev-nightly-repos/architecture=amd…> + '[' -n '' ']' + '[' -n '' ']' + '[' -n 13255574 ']' ++ sed -e 's/^$[0-9]*$.*/\1/' + SECONDS=1 ++ date + echo '*** Finished execution of /usr/bin/build-and-provide-package at Fri Jul 1 01:34:18 UTC 2022 [running 1 seconds] ***' *** Finished execution of /usr/bin/build-and-provide-package at Fri Jul 1 01:34:18 UTC 2022 [running 1 seconds] *** + exit 1 Build step 'Execute shell' marked build as failure Archiving artifacts Recording fingerprints

1 1

git:master:584ef26d: github: enable 5.5 and 5.6 branches [skip ci]
by Victor Seva 01 Jul '22

01 Jul '22

Module: kamailio Branch: master Commit: 584ef26d685f381ddb627866400cfde1b0239f06 URL: https://github.com/kamailio/kamailio/commit/584ef26d685f381ddb627866400cfde… Author: Victor Seva <linuxmaniac(a)torreviejawireless.org> Committer: Victor Seva <linuxmaniac(a)torreviejawireless.org> Date: 2022-07-01T20:57:57+02:00 github: enable 5.5 and 5.6 branches [skip ci] --- Modified: .github/workflows/main.yml --- Diff: https://github.com/kamailio/kamailio/commit/584ef26d685f381ddb627866400cfde… Patch: https://github.com/kamailio/kamailio/commit/584ef26d685f381ddb627866400cfde… --- diff --git a/.github/workflows/main.yml b/.github/workflows/main.yml index 4c94110f683..44f18e0f081 100644 --- a/.github/workflows/main.yml +++ b/.github/workflows/main.yml @@ -4,6 +4,8 @@ name: build push: branches: - master + - '5.6' + - '5.5' pull_request: branches: - master @@ -13,7 +15,7 @@ jobs: build: runs-on: ubuntu-latest container: - image: kamailio/pkg-kamailio-docker:dev-${{ matrix.distribution }} + image: kamailio/pkg-kamailio-docker:${{ github.ref_name }}-${{ matrix.distribution }} volumes: - ${{ github.workspace }}:/code env:

1 0

git:master:66f175f4: siptrace: lookup socket by name if not set for hep
by Daniel-Constantin Mierla 01 Jul '22

01 Jul '22

Module: kamailio Branch: master Commit: 66f175f40e6145e895fa22952b40b372e4eff381 URL: https://github.com/kamailio/kamailio/commit/66f175f40e6145e895fa22952b40b37… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2022-07-01T19:59:34+02:00 siptrace: lookup socket by name if not set for hep - GH #3174 --- Modified: src/modules/siptrace/siptrace_hep.c --- Diff: https://github.com/kamailio/kamailio/commit/66f175f40e6145e895fa22952b40b37… Patch: https://github.com/kamailio/kamailio/commit/66f175f40e6145e895fa22952b40b37… --- diff --git a/src/modules/siptrace/siptrace_hep.c b/src/modules/siptrace/siptrace_hep.c index 412eb8abdc6..6a4fa1f25e4 100644 --- a/src/modules/siptrace/siptrace_hep.c +++ b/src/modules/siptrace/siptrace_hep.c @@ -588,6 +588,9 @@ int hlog(struct sip_msg *msg, str *correlationid, str *message) pkg_free(p); if(trace_send_sock_name_str.s) { + if(!trace_send_sock_info) { + trace_send_sock_info = ksr_get_socket_by_name(&trace_send_sock_name_str); + } dst.send_sock = trace_send_sock_info; } else if(trace_send_sock_str.s) { LM_DBG("send sock activated - find the sock info\n");

1 0

git:master:510013c6: core: fix build warning
by Victor Seva 01 Jul '22

01 Jul '22

Module: kamailio Branch: master Commit: 510013c67df999e5637b6f289c02b3387691ce89 URL: https://github.com/kamailio/kamailio/commit/510013c67df999e5637b6f289c02b33… Author: Victor Seva <linuxmaniac(a)torreviejawireless.org> Committer: Victor Seva <linuxmaniac(a)torreviejawireless.org> Date: 2022-07-01T15:35:20+02:00 core: fix build warning > In file included from /usr/include/string.h:519, > from core/socket_info.c:34: > In function 'strncpy', > inlined from 'fix_hostname' at core/socket_info.c:1741:2: > Warning: /usr/include/x86_64-linux-gnu/bits/string_fortified.h:95:10: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] > 95 | return __builtin___strncpy_chk (__dest, __src, __len, > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > 96 | __glibc_objsize (__dest)); > | ~~~~~~~~~~~~~~~~~~~~~~~~~ > core/socket_info.c: In function 'fix_hostname': > core/socket_info.c:1741:38: note: length computed here > 1741 | strncpy(address_str->s, tmp, strlen(tmp)+1); > | ^~~~~~~~~~~ > In file included from /usr/include/string.h:519, > from core/socket_info.c:34: > In function 'strncpy', > inlined from 'build_iface_list' at core/socket_info.c:1554:5: > Warning: /usr/include/x86_64-linux-gnu/bits/string_fortified.h:95:10: warning: '__builtin_strncpy' output may be truncated copying 63 bytes from a string of length 63 [-Wstringop-truncation] > 95 | return __builtin___strncpy_chk (__dest, __src, __len, > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > 96 | __glibc_objsize (__dest)); > | ~~~~~~~~~~~~~~~~~~~~~~~~~ > In file included from /usr/include/string.h:519, > from core/cfg.y:40: > In function 'strncpy', > inlined from 'yyparse' at core/cfg.y:708:6: > Warning: /usr/include/x86_64-linux-gnu/bits/string_fortified.h:95:10: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] > 95 | return __builtin___strncpy_chk (__dest, __src, __len, > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > 96 | __glibc_objsize (__dest)); > | ~~~~~~~~~~~~~~~~~~~~~~~~~ > core/cfg.tab.c: In function 'yyparse': > core/cfg.y:708:84: note: length computed here > 708 | strncpy($$, $1, strlen($1)+1); > | ^ > In file included from /usr/include/string.h:519, > from core/cfg.y:40: > In function 'strncpy', > inlined from 'yyparse' at core/cfg.y:699:5: > Warning: /usr/include/x86_64-linux-gnu/bits/string_fortified.h:95:10: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] > 95 | return __builtin___strncpy_chk (__dest, __src, __len, > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > 96 | __glibc_objsize (__dest)); > | ~~~~~~~~~~~~~~~~~~~~~~~~~ > core/cfg.tab.c: In function 'yyparse': > core/cfg.y:699:76: note: length computed here > 699 | strncpy($$, $1, strlen($1)+1); > | ^ > In file included from /usr/include/string.h:519, > from core/cfg.y:40: > In function 'strncpy', > inlined from 'yyparse' at core/cfg.y:689:6: > Warning: /usr/include/x86_64-linux-gnu/bits/string_fortified.h:95:10: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] > 95 | return __builtin___strncpy_chk (__dest, __src, __len, > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > 96 | __glibc_objsize (__dest)); > | ~~~~~~~~~~~~~~~~~~~~~~~~~ > core/cfg.tab.c: In function 'yyparse': > core/cfg.y:689:70: note: length computed here > 689 | strncpy($$, tmp, strlen(tmp)+1); > | --- Modified: src/core/cfg.y Modified: src/core/socket_info.c --- Diff: https://github.com/kamailio/kamailio/commit/510013c67df999e5637b6f289c02b33… Patch: https://github.com/kamailio/kamailio/commit/510013c67df999e5637b6f289c02b33… --- diff --git a/src/core/cfg.y b/src/core/cfg.y index dd93f5f98b..19ba698f27 100644 --- a/src/core/cfg.y +++ b/src/core/cfg.y @@ -682,11 +682,12 @@ listen_id: LM_CRIT("cfg. parser: bad ip address.\n"); $$=0; } else { - $$=pkg_malloc(strlen(tmp)+1); + i_tmp=strlen(tmp)+1; + $$=pkg_malloc(i_tmp); if ($$==0) { PKG_MEM_CRITICAL; } else { - strncpy($$, tmp, strlen(tmp)+1); + strncpy($$, tmp, i_tmp); } } } @@ -696,7 +697,8 @@ listen_id: if ($$==0) { PKG_MEM_CRITICAL; } else { - strncpy($$, $1, strlen($1)+1); + i_tmp=strlen($1)+1; + strncpy($$, $1, i_tmp); } } | host_or_if { @@ -705,7 +707,8 @@ listen_id: if ($$==0) { PKG_MEM_CRITICAL; } else { - strncpy($$, $1, strlen($1)+1); + i_tmp=strlen($1)+1; + strncpy($$, $1, i_tmp); } } } diff --git a/src/core/socket_info.c b/src/core/socket_info.c index e4e83d86b3..8c91e873fe 100644 --- a/src/core/socket_info.c +++ b/src/core/socket_info.c @@ -1738,9 +1738,9 @@ static int fix_hostname(str* name, struct ip_addr* address, str* address_str, PKG_MEM_ERROR; goto error; } - strncpy(address_str->s, tmp, strlen(tmp)+1); - /* set is_ip (1 if name is an ip address, 0 otherwise) */ address_str->len=strlen(tmp); + strncpy(address_str->s, tmp, address_str->len+1); + /* set is_ip (1 if name is an ip address, 0 otherwise) */ if (sr_auto_aliases && (address_str->len==name->len) && (strncasecmp(address_str->s, name->s, address_str->len)==0)){ *flags|=SI_IS_IP;

1 0

git:master:5c3a0087: kazoo: fix build warning
by Victor Seva 01 Jul '22

01 Jul '22

Module: kamailio Branch: master Commit: 5c3a00871a73f73843fe83b5c16dd9eecb1207e0 URL: https://github.com/kamailio/kamailio/commit/5c3a00871a73f73843fe83b5c16dd9e… Author: Victor Seva <linuxmaniac(a)torreviejawireless.org> Committer: Victor Seva <linuxmaniac(a)torreviejawireless.org> Date: 2022-07-01T15:10:55+02:00 kazoo: fix build warning > Warning: kz_amqp.c:2271:6: warning: variable 'num_headers' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] > if(idx == -1) { > ^~~~~~~~~ > kz_amqp.c:2327:6: note: uninitialized use occurs here > if (num_headers > 0) { > ^~~~~~~~~~~ > kz_amqp.c:2271:3: note: remove the 'if' if its condition is always false > if(idx == -1) { > ^~~~~~~~~~~~~~~ > kz_amqp.c:2281:5: note: variable 'num_headers' is declared here > int num_headers = 0; > ^ > 1 warning generated. --- Modified: src/modules/kazoo/kz_amqp.c --- Diff: https://github.com/kamailio/kamailio/commit/5c3a00871a73f73843fe83b5c16dd9e… Patch: https://github.com/kamailio/kamailio/commit/5c3a00871a73f73843fe83b5c16dd9e… --- diff --git a/src/modules/kazoo/kz_amqp.c b/src/modules/kazoo/kz_amqp.c index c7088a3c712..873d6fe421c 100644 --- a/src/modules/kazoo/kz_amqp.c +++ b/src/modules/kazoo/kz_amqp.c @@ -2259,7 +2259,8 @@ int kz_amqp_send_ex(kz_amqp_server_ptr srv, kz_amqp_cmd_ptr cmd, kz_amqp_channel amqp_bytes_t routing_key = {0,0}; amqp_bytes_t payload = {0,0}; int ret = -1; - json_obj_ptr json_obj = NULL; + json_obj_ptr json_obj = NULL; + int num_headers = 0; amqp_basic_properties_t props; memset(&props, 0, sizeof(amqp_basic_properties_t)); @@ -2278,7 +2279,6 @@ int kz_amqp_send_ex(kz_amqp_server_ptr srv, kz_amqp_cmd_ptr cmd, kz_amqp_channel routing_key = amqp_bytes_malloc_dup(amqp_cstring_bytes(cmd->routing_key)); payload = amqp_bytes_malloc_dup(amqp_cstring_bytes(cmd->payload)); - int num_headers = 0; if ( (cmd->headers != NULL) && (strlen (cmd->headers) > 0 ) ) { num_headers = add_amqp_headers(cmd->headers, &props); }

1 0

[kamailio/kamailio] Kamailio in local network behind NAT (Issue #3173)
by lehanich 01 Jul '22

01 Jul '22

Hello, I have kamailio in local network behind NAT. Kamailio have one interface eth1 with ip 10.130.0.23 UserAgent - (internet) - (178.0.0.169)router_NAT - (LAN) - (10.130.0.23)kamailio+rtpproxy - pbx I made two listeners: listen=udp:[10.130.0.23:5070](http://10.130.0.23:5070/) #to pbx in lan (I don`t want to put via header with 178.0.0.169) listen=udp:[10.130.0.23:5060](http://10.130.0.23:5060/) advertise [178.0.0.169:5060](http://178.0.0.169:5060/) #to internet (UserAgent need to get via header with 178.0.0.169 ) mhomed = 1 # I think It not useful for my case UserAgent send Register and Invite to [178.0.0.169:5060](http://178.0.0.169:5060/), Kamailio get it on udp:[10.130.0.23:5060](http://10.130.0.23:5060/) Kamailio Relay it to udp:[10.130.0.23:5070](http://10.130.0.23:5070/) My pbx get requests from udp:[10.130.0.23:5070](http://10.130.0.23:5070/) with via header 10.130.0.23 Responses to UserAgent go from udp:[10.130.0.23:5060](http://10.130.0.23:5060/) with via 178.0.0.169 In RELAY block: if ($Ru == «udp:10.130.0.23:5070») { #set_send_socket(«udp:10.130.0.23:5060»); $fs = «udp:10.130.0.23:5060»; #force_send_socket(«udp:10.130.0.23:5060»); } else { #set_send_socket(«udp:10.130.0.23:5070»); $fs = «udp:10.130.0.23:5070»; } #$fs = «udp:10.130.0.23:5070»; if (!t_relay()) { sl_reply_error(); } route[REGISTRAR] { ... if ($rd == "[mydomain.ru](http://mydomain.ru/)" || $rd == "[mydomain2.ru](http://mydomain2.ru/)") { set_send_socket("udp:[10.130.0.23:5070](http://10.130.0.23:5070/)"); add_path(); route(DISPATCH); } ... } It works for requests (INVITE and REGISTER) from UserAgent to PBX thought kamailio. But INVITE from my pbx to UserAgent go out only through udp:10.130.0.23:5070, Kamailio realy it to internet from udp:10.130.0.23:5070 I get error in syslog: (pv [pv_branch.c:62]: pv_get_branchx_helper(): error accessing branch [0]) I tried set_send_socket(«udp:10.130.0.23:5070»); and $fs = «udp:10.130.0.23:5070»; Why I can`t relay outgoing requests to internet through another socket? Thank you. -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3173 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3173(a)github.com>

2 2

[kamailio/kamailio] kamdbctl.dbtext and kamctl.dbtext use different variables (Issue #3170)
by UncleRa 01 Jul '22

01 Jul '22

### Description Unexpected behavior when using db_text.so #### Debugging Data ``` root@kamailio:/usr/lib/x86_64-linux-gnu/kamailio/kamctl# grep -r DB_PATH * kamdbctl.dbtext:if [ -z "$DB_PATH" ] ; then kamdbctl.dbtext: DB_PATH="/usr/local/etc/kamailio/dbtext" kamdbctl.dbtext:DB_PATH=$1 kamdbctl.dbtext:minfo "DBTEXT ... erasing all files at: $DB_PATH" kamdbctl.dbtext:rm -rf $DB_PATH kamdbctl.dbtext: merr "kamailio_create function takes one param (DB_PATH)" kamdbctl.dbtext:DB_PATH=$1 kamdbctl.dbtext:minfo "creating DBTEXT tables at: $DB_PATH ..." kamdbctl.dbtext:mkdir -p $DB_PATH kamdbctl.dbtext: cp $DB_SCHEMA/$TABLE $DB_PATH/$TABLE kamdbctl.dbtext: merr "presence_create function takes one param (DB_PATH)" kamdbctl.dbtext:DB_PATH=$1 kamdbctl.dbtext:minfo "creating DBTEXT presence tables at: $DB_PATH ..." kamdbctl.dbtext:mkdir -p $DB_PATH kamdbctl.dbtext: cp $DB_SCHEMA/$TABLE $DB_PATH/$TABLE kamdbctl.dbtext:minfo "creating DBTEXT extra tables at: $DB_PATH ..." kamdbctl.dbtext: cp $DB_SCHEMA/$TABLE $DB_PATH/$TABLE ``` ``` root@kamailioz99s1:/usr/lib/x86_64-linux-gnu/kamailio/kamctl# grep -r DBTEXT_PATH * dbtextdb/dbtextdb.py: if 'DBTEXT_PATH' not in os.environ or not os.environ['DBTEXT_PATH']: dbtextdb/dbtextdb.py: print('DBTEXT_PATH must be set') dbtextdb/dbtextdb.py: location = os.environ['DBTEXT_PATH'] kamctl.dbtext: DBTEXT_PATH="$MYLIBDIR/dbtext/kamailio/" kamctl.dbtext:if [ -z "$DBTEXT_PATH" ] ; then kamctl.dbtext: DBTEXT_PATH="/usr/share/kamailio/dbtext/kamailio" kamctl.dbtext:export DBTEXT_PATH ``` ### Possible Solutions The simplest way to fix it is to add the lines to the file `kamctlrc` ``` root@kamailioz99s1:~/backup/orig# diff kamctlrc kamctlrc.orig 32,34d31 < # database path used by kamctl.dbtext and dbtextdb.py < # DBTEXT_PATH="/usr/local/etc/kamailio/dbtext" < ``` ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.3.9 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 7.5.0 ``` * **Operating System**: ``` DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.6 LTS" ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3170 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3170(a)github.com>

2 4

[kamailio/kamailio] topos breaking update messages (Issue #3090)
by Simone de Blasiis 30 Jun '22

30 Jun '22

### Description This issue has already been reported in the past both on GitHub ( Issue #2659 ) and on the [mailing list](https://lists.kamailio.org/pipermail/sr-users/2022-April/114620.html). We are experiencing some issues with UPDATE messages being sent by the PSTN after an early media announcement. To reproduce the issue we can call a specific number that has an early media announcement, since it's a paid phone number it has to announce how much it would cost before picking up the call. In this initial part the call is being negotiated in g711a. As soon as the announcement ends, the PSTN sends an UPDATE message containing the new desired codec (g729) for the actual call. Kamailio doesn't route the UPDATE message to the destination and it instead replies with a 404 message. If topos is disabled the update message gets routed correctly. #### SIP Traffic I've attached a pcap with anonymized IPs to make it harder for bots. Here is a legend for the IPs: - 12.34.123.123 is Kamailio - 62.23.19.74 is the PSTN - 1.2.130.40 is the client making the call [errorupdate_anon.zip](https://github.com/kamailio/kamailio/files/8522365/er… ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.5.4 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 10.2.1 ``` * **Operating System**: ``` Linux 5.10.0-13-amd64 #1 SMP Debian 5.10.106-1 (2022-03-17) x86_64 GNU/Linux ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3090 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3090(a)github.com>

4 12

git:master:1f6ec902: kamctl: propagate DB_PATH to DBTEXT_PATH
by Daniel-Constantin Mierla 30 Jun '22

30 Jun '22

Module: kamailio Branch: master Commit: 1f6ec9022f2358441233e8b139e13cbdcf0947aa URL: https://github.com/kamailio/kamailio/commit/1f6ec9022f2358441233e8b139e13cb… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2022-06-30T19:34:28+02:00 kamctl: propagate DB_PATH to DBTEXT_PATH - GH #3170 --- Modified: utils/kamctl/kamctl.dbtext --- Diff: https://github.com/kamailio/kamailio/commit/1f6ec9022f2358441233e8b139e13cb… Patch: https://github.com/kamailio/kamailio/commit/1f6ec9022f2358441233e8b139e13cb… --- diff --git a/utils/kamctl/kamctl.dbtext b/utils/kamctl/kamctl.dbtext index 2198d30db2..0e5f9c424a 100644 --- a/utils/kamctl/kamctl.dbtext +++ b/utils/kamctl/kamctl.dbtext @@ -19,7 +19,11 @@ fi; # path to the dbtext database if [ -z "$DBTEXT_PATH" ] ; then - DBTEXT_PATH="/usr/local/share/kamailio/dbtext/kamailio" + if [ -z "$DB_PATH" ] ; then + DBTEXT_PATH="/usr/local/share/kamailio/dbtext/kamailio" + else + DBTEXT_PATH=$DB_PATH + fi fi export DBTEXT_PATH

1 0

git:master:ecbe9052: pkg/kamailio/deb: add initial support for jammy
by Victor Seva 30 Jun '22

30 Jun '22

Module: kamailio Branch: master Commit: ecbe90524165cf2fd8081ec5fe81d674f7a3334a URL: https://github.com/kamailio/kamailio/commit/ecbe90524165cf2fd8081ec5fe81d67… Author: Victor Seva <linuxmaniac(a)torreviejawireless.org> Committer: Victor Seva <linuxmaniac(a)torreviejawireless.org> Date: 2022-06-30T07:46:48+02:00 pkg/kamailio/deb: add initial support for jammy --- Added: pkg/kamailio/deb/debian/backports/jammy Added: pkg/kamailio/deb/jammy/changelog Added: pkg/kamailio/deb/jammy/compat Added: pkg/kamailio/deb/jammy/control Added: pkg/kamailio/deb/jammy/copyright Added: pkg/kamailio/deb/jammy/kamailio-autheph-modules.lintian-overrides Added: pkg/kamailio/deb/jammy/kamailio-berkeley-bin.dirs Added: pkg/kamailio/deb/jammy/kamailio-dnssec-modules.lintian-overrides Added: pkg/kamailio/deb/jammy/kamailio-outbound-modules.lintian-overrides Added: pkg/kamailio/deb/jammy/kamailio-secsipid-modules.lintian-overrides Added: pkg/kamailio/deb/jammy/kamailio-systemd-modules.lintian-overrides Added: pkg/kamailio/deb/jammy/kamailio-tls-modules.lintian-overrides Added: pkg/kamailio/deb/jammy/kamailio-websocket-modules.lintian-overrides Added: pkg/kamailio/deb/jammy/kamailio.README.Debian Added: pkg/kamailio/deb/jammy/kamailio.default Added: pkg/kamailio/deb/jammy/kamailio.examples Added: pkg/kamailio/deb/jammy/kamailio.init Added: pkg/kamailio/deb/jammy/kamailio.lintian-overrides Added: pkg/kamailio/deb/jammy/kamailio.postinst Added: pkg/kamailio/deb/jammy/kamailio.service Added: pkg/kamailio/deb/jammy/rules Added: pkg/kamailio/deb/jammy/source.lintian-overrides Added: pkg/kamailio/deb/jammy/source/format Added: pkg/kamailio/deb/jammy/watch --- Diff: https://github.com/kamailio/kamailio/commit/ecbe90524165cf2fd8081ec5fe81d67… Patch: https://github.com/kamailio/kamailio/commit/ecbe90524165cf2fd8081ec5fe81d67…

1 0

[kamailio/kamailio] IP tos value not updated when forwarding the request (Issue #3167)
by patrickarton 29 Jun '22

29 Jun '22

### Description i am setting **tos** core parameter to set TOS for sent IP messages but when they leave kamailio i dont the see IP TOS updated via wireshark. (caller) 192.168.214.125:3030 <-----> (kamailio) 192.168.214.125:7070 <-----> (kamailio) 192.168.214.205:8080  ### Troubleshooting #### Reproduction ``` children=3 listen=udp:192.168.214.125:7070 debug=0 tos=184 ```  #### Debugging Data  ``` (paste your debugging data here) ``` #### Log Messages  ``` (paste your log messages here) ``` #### SIP Traffic  ``` (paste your sip traffic here) ``` ![kamailio-tos](https://user-images.githubusercontent.com/91390150/176262063-0a9a9ced-7fd1-405f-b249-7ebf0e601548.jpg) ### Possible Solutions  ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` 5.5.4 ``` * **Operating System**:  ``` (paste your output here) ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3167 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3167(a)github.com>

1 1

How to enable SSL in kamailio mysql db connectivity
by Jeetha P J 29 Jun '22

29 Jun '22

Hi Team, We have SSL in mySQL DB.So I need to add configuration in kamailio also.I am adding the configuration I tried. Please help me to achieve this.Its little urgent. My /etc/mysql/my.cnf [client] socket = /run/mysqld/mysqld.sock ssl_key=/var/lib/mysql/Quant-certs/client-key.pem ssl_cert=/var/lib/mysql/Quant-certs/client_ca_cert.pem ssl_ca=/var/lib/mysql/Quant-certs/server-ca.pem #require_secure_transport = ON [kamailio] socket = /run/mysqld//mysqld.sock #require_secure_transport = ON user = kamailio password = kamailiorw host=xxx.xxx.xxx.xxx default-character-set = utf8 ssl_key=/var/lib/mysql/Quant-certs/client-key.pem ssl_cert=/var/lib/mysql/Quant-certs/client_ca_cert.pem ssl_ca=/var/lib/mysql/Quant-certs/server-ca.pem ssl_verify=1 /etc/kamailio/kamailio.cfg #!ifndef DBURL #!define DBURL "mysql://kamailio:kamailiorw@xx.xx.xxx.xxx/kamailio" #!endif gateqeeper-kam-dev kamailio[7879]: 0(7879) DEBUG: db_mysql [km_my_con.c:107]: db_mysql_new_connection(): opening connection: mysql://xxxx:xxxx@xx.xxx.xx.xxx/kamailio Jun 27 06:53:12 gateqeeper-kam-dev kamailio[7879]: 0(7879) ERROR: db_mysql [km_my_con.c:139]: db_mysql_new_connection(): driver error: Access denied for user 'kamailio'@'xx.xxx.xx.xx' (using password: YES) Please help me to get it solved. Thanks & Regards Jeetha P J -- _This message contains information that may be privileged or confidential and is the property of the Quantiphi Inc and/or its affiliates_. It is intended only for the person to whom it is addressed. _If you are not the intended recipient, any review, dissemination, distribution, copying, storage or other use of all or any portion of this message is strictly prohibited. If you received this message in error, please immediately notify the sender by reply e-mail and delete this message in its *entirety*___

2 4

Jenkins build became unstable: kamailiodev-nightly-binaries » i386,bookworm #2221
by kamailio＠sipwise.com 29 Jun '22

29 Jun '22

See <https://kamailio.sipwise.com/job/kamailiodev-nightly-binaries/architecture=…>

1 1

Jenkins build became unstable: kamailio56-nightly-binaries » i386,bookworm #16
by kamailio＠sipwise.com 29 Jun '22

29 Jun '22

See <https://kamailio.sipwise.com/job/kamailio56-nightly-binaries/architecture=i…>

1 0

[kamailio/kamailio] command line arg `--substdefs` doesn't work anymore (Issue #3152)
by Seven Du 28 Jun '22

28 Jun '22

### Description  with the following args ``` --substdefs=/S_KAM_IP_PUBLIC/$KAM_IP_PUBLIC/ \ --substdefs=/S_KAM_SIP_PORT/$KAM_SIP_PORT/ ``` error logs when start ``` 0(24400) ERROR: <core> [core/ppcfg.c:57]: pp_def_qvalue(): defined value is too large 0 < 15 0(24400) ERROR: <core> [core/ppcfg.c:192]: pp_substdef_add(): failed to enclose in quotes the value 0(24400) ERROR: <core> [main.c:2371]: main(): failed to add substdefs expression: /S_KAM_IP_PUBLIC/192.168.7.8/ ``` ### Troubleshooting the first log was reported with this pr https://github.com/kamailio/kamailio/pull/3151 so looks like `pv_get_buffer_size()` returns `0`, and there looks like nowhere called `pv_set_buffer_size()`. I can confirm the same args works with the docker image: `kamailio/kamailio-ci:5.4.4-alpine`. the following config works in `kamailio.cfg`, so only the command line arg has problem. ``` #!substdef "!HOMER_DB_USER!homer_user!g" #!substdefs "/ID/subst/" ``` #### Reproduction  add the following arg to command line when kamailio start ``` --substdefs=/ID/VALUE/ ``` #### Debugging Data  ``` (paste your debugging data here) ``` #### Log Messages  ``` (paste your log messages here) ``` #### SIP Traffic  ``` (paste your sip traffic here) ``` ### Possible Solutions  ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` (paste your output here) ``` * **Operating System**:  ``` (paste your output here) ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3152 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3152(a)github.com>

2 2

git:master:a78adb53: core: init pv buffers earlier to be avaialble for cli params
by Daniel-Constantin Mierla 28 Jun '22

28 Jun '22

Module: kamailio Branch: master Commit: a78adb5340ae6cb57f756189d070c32c49bfa426 URL: https://github.com/kamailio/kamailio/commit/a78adb5340ae6cb57f756189d070c32… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2022-06-28T18:43:53+02:00 core: init pv buffers earlier to be avaialble for cli params - GH #3152 --- Modified: src/main.c --- Diff: https://github.com/kamailio/kamailio/commit/a78adb5340ae6cb57f756189d070c32… Patch: https://github.com/kamailio/kamailio/commit/a78adb5340ae6cb57f756189d070c32… --- diff --git a/src/main.c b/src/main.c index e919a23274..c6855e2033 100644 --- a/src/main.c +++ b/src/main.c @@ -2178,6 +2178,10 @@ int main(int argc, char** argv) init_tcp_options(); /* set the defaults before the config */ #endif + if (pv_init_buffer()<0) { + goto error; + } + pp_define_core(); /* process command line (cfg. file path etc) */

1 0

git:5.6:203d0ca9: pv_headers: rework pvh_remove_header_param
by Victor Seva 28 Jun '22

28 Jun '22

Module: kamailio Branch: 5.6 Commit: 203d0ca9b5564d006ad3f56bdf7c1e8572f456fb URL: https://github.com/kamailio/kamailio/commit/203d0ca9b5564d006ad3f56bdf7c1e8… Author: Victor Seva <vseva(a)sipwise.com> Committer: Victor Seva <linuxmaniac(a)torreviejawireless.org> Date: 2022-06-28T12:58:45+02:00 pv_headers: rework pvh_remove_header_param * fix KEMI interface, this is suppose to be called like pvh_remove_header_param(header_name, string_to_remove) * use pv buffer for temporal value * use xavi interface to set the new value (cherry picked from commit d9626dc9f341718ad7d78e62042695124ba52c32) --- Modified: src/modules/pv_headers/pv_headers.c Modified: src/modules/pv_headers/pvh_func.c Modified: src/modules/pv_headers/pvh_func.h --- Diff: https://github.com/kamailio/kamailio/commit/203d0ca9b5564d006ad3f56bdf7c1e8… Patch: https://github.com/kamailio/kamailio/commit/203d0ca9b5564d006ad3f56bdf7c1e8…

1 0

git:master:d9626dc9: pv_headers: rework pvh_remove_header_param
by Victor Seva 28 Jun '22

28 Jun '22

Module: kamailio Branch: master Commit: d9626dc9f341718ad7d78e62042695124ba52c32 URL: https://github.com/kamailio/kamailio/commit/d9626dc9f341718ad7d78e620426951… Author: Victor Seva <vseva(a)sipwise.com> Committer: Victor Seva <linuxmaniac(a)torreviejawireless.org> Date: 2022-06-28T12:56:35+02:00 pv_headers: rework pvh_remove_header_param * fix KEMI interface, this is suppose to be called like pvh_remove_header_param(header_name, string_to_remove) * use pv buffer for temporal value * use xavi interface to set the new value --- Modified: src/modules/pv_headers/pv_headers.c Modified: src/modules/pv_headers/pvh_func.c Modified: src/modules/pv_headers/pvh_func.h --- Diff: https://github.com/kamailio/kamailio/commit/d9626dc9f341718ad7d78e620426951… Patch: https://github.com/kamailio/kamailio/commit/d9626dc9f341718ad7d78e620426951…

1 0

git:master:03a489ad: pkg/kamailio/deb: update lintian overrides [skip ci]
by Victor Seva 28 Jun '22

28 Jun '22

Module: kamailio Branch: master Commit: 03a489addb248bd7e4820dc281ade4f4f3deda3c URL: https://github.com/kamailio/kamailio/commit/03a489addb248bd7e4820dc281ade4f… Author: Victor Seva <linuxmaniac(a)torreviejawireless.org> Committer: Victor Seva <linuxmaniac(a)torreviejawireless.org> Date: 2022-06-28T09:37:59+02:00 pkg/kamailio/deb: update lintian overrides [skip ci] --- Modified: pkg/kamailio/deb/bionic/kamailio-tls-modules.lintian-overrides Modified: pkg/kamailio/deb/bionic/kamailio.lintian-overrides Modified: pkg/kamailio/deb/bookworm/kamailio-tls-modules.lintian-overrides Modified: pkg/kamailio/deb/bookworm/kamailio.lintian-overrides Modified: pkg/kamailio/deb/bullseye/kamailio-tls-modules.lintian-overrides Modified: pkg/kamailio/deb/bullseye/kamailio.lintian-overrides Modified: pkg/kamailio/deb/buster/kamailio-tls-modules.lintian-overrides Modified: pkg/kamailio/deb/buster/kamailio.lintian-overrides Modified: pkg/kamailio/deb/debian/kamailio-tls-modules.lintian-overrides Modified: pkg/kamailio/deb/debian/kamailio.lintian-overrides Modified: pkg/kamailio/deb/focal/kamailio-tls-modules.lintian-overrides Modified: pkg/kamailio/deb/focal/kamailio.lintian-overrides Modified: pkg/kamailio/deb/jessie/kamailio-tls-modules.lintian-overrides Modified: pkg/kamailio/deb/jessie/kamailio.lintian-overrides Modified: pkg/kamailio/deb/precise/kamailio-tls-modules.lintian-overrides Modified: pkg/kamailio/deb/precise/kamailio.lintian-overrides Modified: pkg/kamailio/deb/sid/kamailio-tls-modules.lintian-overrides Modified: pkg/kamailio/deb/sid/kamailio.lintian-overrides Modified: pkg/kamailio/deb/stretch/kamailio-tls-modules.lintian-overrides Modified: pkg/kamailio/deb/stretch/kamailio.lintian-overrides Modified: pkg/kamailio/deb/trusty/kamailio-tls-modules.lintian-overrides Modified: pkg/kamailio/deb/trusty/kamailio.lintian-overrides Modified: pkg/kamailio/deb/wheezy/kamailio-tls-modules.lintian-overrides Modified: pkg/kamailio/deb/wheezy/kamailio.lintian-overrides Modified: pkg/kamailio/deb/xenial/kamailio-tls-modules.lintian-overrides Modified: pkg/kamailio/deb/xenial/kamailio.lintian-overrides --- Diff: https://github.com/kamailio/kamailio/commit/03a489addb248bd7e4820dc281ade4f… Patch: https://github.com/kamailio/kamailio/commit/03a489addb248bd7e4820dc281ade4f…

1 0

[kamailio/kamailio] second auth via uac_reg_request_to (Issue #3166)
by Alberto bebbo Capponi 27 Jun '22

27 Jun '22

When using uac_reg_request_to and the first trunk fails (as invalid credentials) try a second trunk, but there is something not cleaned or just doesn't get the new trunk auth params. code example ``` failure_route[RETRY_OUTBOUND] { if (t_check_status("401|407")) { if(uac_reg_request_to("$rd", 0)) { t_on_failure("RETRY_OUTBOUND"); xinfo("[RETRY_OUTBOUND] <$ci> | Doing authentication with $dd"); uac_auth(); t_relay(); exit; } } if (next_routing()) { $avp(out_trunk) = $rd; # t_relay(); t_on_failure("RETRY_OUTBOUND"); t_relay(); exit; } } ``` running this code to those targets: - TRUNK 10.3.3.11 (invalid user/pass) - TRUNK 10.3.3.12 (correct user/pass) produce this output in logs: ``` INFO: [RETRY_OUTBOUND] <xxxx1xxx@10.3.3.11:5060> | Doing authentication with 10.3.3.10 INFO: uac [auth.c:450]: uac_auth_mode(): no credential for realm "10.3.3.11" INFO: [RETRY_OUTBOUND] <xxxx1yyyy@10.3.3.12:5060> | Doing authentication with 10.3.3.10 ``` but if I simply remove the first trunk those credential works on the second trunk. is like some stuff (like the $dd) is not cleaned up / refreshed? version: ``` version: kamailio 5.5.4 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 8.3.0 ``` running with drouting module to get next trunk -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3166 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3166(a)github.com>

2 2

git:master:c170cc81: tls_wolfssl: make - use kamailio make infra vars
by S-P Chan 27 Jun '22

27 Jun '22

Module: kamailio Branch: master Commit: c170cc811b9a03383c07578f4b4c88e15b96b637 URL: https://github.com/kamailio/kamailio/commit/c170cc811b9a03383c07578f4b4c88e… Author: S-P Chan <shihping.chan(a)gmail.com> Committer: S-P Chan <shihping.chan(a)gmail.com> Date: 2022-06-27T21:50:20+08:00 tls_wolfssl: make - use kamailio make infra vars --- Modified: src/modules/tls_wolfssl/Makefile --- Diff: https://github.com/kamailio/kamailio/commit/c170cc811b9a03383c07578f4b4c88e… Patch: https://github.com/kamailio/kamailio/commit/c170cc811b9a03383c07578f4b4c88e… --- diff --git a/src/modules/tls_wolfssl/Makefile b/src/modules/tls_wolfssl/Makefile index 6dd9e1b770..687fe1a494 100644 --- a/src/modules/tls_wolfssl/Makefile +++ b/src/modules/tls_wolfssl/Makefile @@ -9,17 +9,13 @@ auto_gen= NAME=tls_wolfssl.so LIBS += lib/lib/libwolfssl.a -DEFS += -I./lib/include/ +INCLUDES += -I./lib/include/ include ../../Makefile.modules -SOURCES := $(shell ls *.c) -OBJECTS = $(SOURCES:.c=.o) -MOD_DIR := $(shell pwd) +$(objs): lib/include/wolfssl/options.h -$(OBJECTS): lib/lib/libwolfssl.a - -lib/lib/libwolfssl.a: +lib/include/wolfssl/options.h lib/lib/libwolfssl.a: @cd ./lib/wolfssl; \ if [ ! -f "configure" ]; then \ ./autogen.sh; \ @@ -28,9 +24,8 @@ lib/lib/libwolfssl.a: env -u DEFS -u CFLAGS -u LDFLAGS -u LIBS EXTRA_CFLAGS="-g -fPIC -Wno-error=array-bounds -Wno-error=stringop-overflow" ./configure \ --enable-all --enable-pkcs11 --enable-static --enable-aligndata=no \ --disable-shared --disable-examples \ - --prefix=$(MOD_DIR)/lib \ - --exec-prefix=$(MOD_DIR)/lib; \ - sed -i s/-Werror// Makefile; \ + --prefix=$(CURDIR)/lib \ + --exec-prefix=$(CURDIR)/lib; \ fi; @$(MAKE) -C ./lib/wolfssl install @@ -38,7 +33,7 @@ $(NAME): lib/lib/libwolfssl.a clean-wolfssl: @rm -rf ./lib/{bin,include,share,lib}; \ - cd ./lib/wolfssl; make clean || /bin/true + (cd ./lib/wolfssl; make distclean) || /bin/true clean-module: @rm -f *.o *.so @@ -46,3 +41,6 @@ clean-module: clean-all: clean-wolfssl clean-module .PHONY: clean-wolfssl clean-module clean-all + +# debugging for dependency on lib/wolfssl +$(warning sources = $(sources), auto_gen = $(auto_gen), objs = $(objs))

1 0

git:master:fa6a2d79: ipops: added fixup free functions and use of ANY_ROUTE
by Daniel-Constantin Mierla 27 Jun '22

27 Jun '22

Module: kamailio Branch: master Commit: fa6a2d79aca3bc4733276ce99a53efd8fe63ffd5 URL: https://github.com/kamailio/kamailio/commit/fa6a2d79aca3bc4733276ce99a53efd… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2022-06-25T14:48:35+02:00 ipops: added fixup free functions and use of ANY_ROUTE --- Modified: src/modules/ipops/ipops_mod.c --- Diff: https://github.com/kamailio/kamailio/commit/fa6a2d79aca3bc4733276ce99a53efd… Patch: https://github.com/kamailio/kamailio/commit/fa6a2d79aca3bc4733276ce99a53efd…

1 0

[kamailio/kamailio] detailed_ipv4_type func pkg memory leak. (Issue #3159)
by 杰哥 25 Jun '22

25 Jun '22

### Description when call detailed_ipv4_type function, pkg memory leak. ```c detailed_ipv4_type($si,"$var(iptype)"); ``` ### Troubleshooting #### Reproduction just call detailed_ipv4_type function. #### Debugging Data ``` ALERT: qm_sums: qm_sums(): count= 48161 size= 1789640 bytes from core: core/rvalue.c: rval_get_str(1293) ``` ### Possible Solutions ip address string not free in rval_get_str() function. [s->s=pkg_malloc(tmp.len+1/* 0 term */);](https://github.com/kamailio/kamailio/blob/1ddc27f199061025a6a43da3e8a1388fcaddfe19/src/core/rvalue.c#L1293) need call pkg_free() free memory. ### Additional Information test 3 version. ``` kamailio 5.5.4 kamailio 5.4.8 kamailio 5.3.9 ``` * **Operating System**: ``` buster 10 ubuntu 20.04 ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3159 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3159(a)github.com>

2 7

[kamailio/kamailio] topos breaks early-dialog update even on 5.6.0~rc0 (Issue #3112)
by George Diamantopoulos 24 Jun '22

24 Jun '22

### Description Topos still seems to break early-dialog UPDATEs in my configuration. This is on 5.6.0~rc0+bpo11.20220506004754.1 from 56-nightly which I believe includes c309122 and ceb688b. I haven't tested rc1 yet (there are no debs at this time) but there doesn't seem to be any topos-related commits since rc0 either. ### Troubleshooting #### SIP Traffic Attaching pcaps from a lab environment to demonstrate the problem. One with topos on (failure), one with off (success). There were no other configuration changes between these tests. ### Possible Solutions Only turning topos off seems to resolve this for me. ### Additional Information ``` version: kamailio 5.6.0-rc0 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 10.2.1 ``` * **Operating System**: ``` Linux sbcprov0-stage-tis0-cn1 5.10.0-10-amd64 #1 SMP Debian 5.10.84-1 (2021-12-08) x86_64 GNU/Linux ``` [pcaps.tar.gz](https://github.com/kamailio/kamailio/files/8704222/pcaps.tar.… -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3112 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3112(a)github.com>

3 6

git:master:87b698f7: modules: readme files regenerated - textops ... [skip ci]
by Kamailio Dev 24 Jun '22

24 Jun '22

Module: kamailio Branch: master Commit: 87b698f7deca1794019f98167ba49d3e4737ba71 URL: https://github.com/kamailio/kamailio/commit/87b698f7deca1794019f98167ba49d3… Author: Kamailio Dev <kamailio.dev(a)kamailio.org> Committer: Kamailio Dev <kamailio.dev(a)kamailio.org> Date: 2022-06-24T16:01:17+02:00 modules: readme files regenerated - textops ... [skip ci] --- Modified: src/modules/textops/README Modified: src/modules/tls/README --- Diff: https://github.com/kamailio/kamailio/commit/87b698f7deca1794019f98167ba49d3… Patch: https://github.com/kamailio/kamailio/commit/87b698f7deca1794019f98167ba49d3… --- diff --git a/src/modules/textops/README b/src/modules/textops/README index fabc8e3371..c187c4c8db 100644 --- a/src/modules/textops/README +++ b/src/modules/textops/README @@ -157,8 +157,8 @@ Ovidiu Sas 1.43. has_body usage 1.44. is_audio_on_hold usage 1.45. is_privacy usage - 1.46. in_list() usage - 1.47. in_list() usage + 1.46. in_list usage + 1.47. in_list_prefix usage 1.48. cmp_str usage 1.49. cmp_str usage 1.50. starts_with usage @@ -1239,7 +1239,7 @@ if(is_privacy("id")) Function can be used from all kinds of routes. - Example 1.46. in_list() usage + Example 1.46. in_list usage ... $var(subject) = "fi"; $var(list) = "dk,fi,no,se"; @@ -1257,7 +1257,7 @@ if (in_list("$var(subject)", "$var(list)", ",")) { Function can be used from all kinds of routes. - Example 1.47. in_list() usage + Example 1.47. in_list_prefix usage ... $var(subject) = "final"; $var(list) = "dk,fi,no,se"; diff --git a/src/modules/tls/README b/src/modules/tls/README index 94c8cfc069..c9bed56ec5 100644 --- a/src/modules/tls/README +++ b/src/modules/tls/README @@ -250,7 +250,7 @@ Chapter 1. Admin Guide The most important parameters to set the path to the public certificate and private key files. You can either have them in different file or in the same file in PEM format. The parameters for them are certificate - and private_key. They can be given as modparam or or provided in the + and private_key. They can be given as modparam or provided in the profiles of tls.cfg file. When installing tls module of kamailio, a sample 'tls.cfg' file is

1 0

[kamailio/kamailio] Fix typos (PR #3162)
by Akash Gupta 24 Jun '22

24 Jun '22

#### Pre-Submission Checklist    - [x] Commit message has the format required by CONTRIBUTING guide - [x] Commits are split per component (core, individual modules, libs, utils, ...) - [ ] Each component has a single commit (if not, squash them into one commit) - [ ] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [ ] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/3162 -- Commit Summary -- * textops: Fix typos * tls: Fix typo -- File Changes -- M src/modules/textops/doc/textops_admin.xml (4) M src/modules/tls/doc/tls.xml (2) -- Patch Links -- https://github.com/kamailio/kamailio/pull/3162.patch https://github.com/kamailio/kamailio/pull/3162.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/3162 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/3162(a)github.com>

2 2

git:master:c5cd4002: textops: Fix typos
by Daniel-Constantin Mierla 24 Jun '22

24 Jun '22

Module: kamailio Branch: master Commit: c5cd400287e27fce6fcf6272a4efe9a9fa8aa419 URL: https://github.com/kamailio/kamailio/commit/c5cd400287e27fce6fcf6272a4efe9a… Author: Akash Gupta <akash(a)telnyx.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2022-06-24T15:49:50+02:00 textops: Fix typos --- Modified: src/modules/textops/doc/textops_admin.xml --- Diff: https://github.com/kamailio/kamailio/commit/c5cd400287e27fce6fcf6272a4efe9a… Patch: https://github.com/kamailio/kamailio/commit/c5cd400287e27fce6fcf6272a4efe9a… --- diff --git a/src/modules/textops/doc/textops_admin.xml b/src/modules/textops/doc/textops_admin.xml index 9805aac6aab..dbca57e5f0a 100644 --- a/src/modules/textops/doc/textops_admin.xml +++ b/src/modules/textops/doc/textops_admin.xml @@ -1711,7 +1711,7 @@ if(is_privacy("id")) Function can be used from all kinds of routes. </para> <example> - <title><function>in_list()</function> usage</title> + <title><function>in_list</function> usage</title> <programlisting format="linespecific"> ... $var(subject) = "fi"; @@ -1735,7 +1735,7 @@ if (in_list("$var(subject)", "$var(list)", ",")) { Function can be used from all kinds of routes. </para> <example> - <title><function>in_list()</function> usage</title> + <title><function>in_list_prefix</function> usage</title> <programlisting format="linespecific"> ... $var(subject) = "final";

1 0

git:master:4570b3eb: tls: Fix typo
by Daniel-Constantin Mierla 24 Jun '22

24 Jun '22

Module: kamailio Branch: master Commit: 4570b3ebc6da35efc3cc55b1f4418446b9071688 URL: https://github.com/kamailio/kamailio/commit/4570b3ebc6da35efc3cc55b1f441844… Author: Akash Gupta <akash(a)telnyx.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2022-06-24T15:49:50+02:00 tls: Fix typo --- Modified: src/modules/tls/doc/tls.xml --- Diff: https://github.com/kamailio/kamailio/commit/4570b3ebc6da35efc3cc55b1f441844… Patch: https://github.com/kamailio/kamailio/commit/4570b3ebc6da35efc3cc55b1f441844… --- diff --git a/src/modules/tls/doc/tls.xml b/src/modules/tls/doc/tls.xml index e356d5bff7c..f3ff2321c78 100644 --- a/src/modules/tls/doc/tls.xml +++ b/src/modules/tls/doc/tls.xml @@ -84,7 +84,7 @@ The most important parameters to set the path to the public certificate and private key files. You can either have them in different file or in the same file in PEM format. The parameters for them are <varname>certificate</varname> and <varname>private_key</varname>. - They can be given as modparam or or provided in the profiles of tls.cfg file. + They can be given as modparam or provided in the profiles of tls.cfg file. </para> <para> When installing tls module of kamailio, a sample 'tls.cfg' file is deployed in the same

1 0

[kamailio/kamailio] Fix typos (PR #3161)
by Akash Gupta 24 Jun '22

24 Jun '22

#### Pre-Submission Checklist    - [ ] Commit message has the format required by CONTRIBUTING guide - [ ] Commits are split per component (core, individual modules, libs, utils, ...) - [ ] Each component has a single commit (if not, squash them into one commit) - - [x] [ ] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - - [ ] [ ] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [ ] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/3161 -- Commit Summary -- * Fix typos -- File Changes -- M src/modules/textops/doc/textops_admin.xml (4) M src/modules/tls/doc/tls.xml (2) -- Patch Links -- https://github.com/kamailio/kamailio/pull/3161.patch https://github.com/kamailio/kamailio/pull/3161.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/3161 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/3161(a)github.com>

2 4

git:master:65a484df: modules: readme files regenerated - nats ... [skip ci]
by Kamailio Dev 24 Jun '22

24 Jun '22

Module: kamailio Branch: master Commit: 65a484dffa3c854bc17068175cee3dc37fd09d18 URL: https://github.com/kamailio/kamailio/commit/65a484dffa3c854bc17068175cee3dc… Author: Kamailio Dev <kamailio.dev(a)kamailio.org> Committer: Kamailio Dev <kamailio.dev(a)kamailio.org> Date: 2022-06-24T12:46:16+02:00 modules: readme files regenerated - nats ... [skip ci] --- Modified: src/modules/nats/README --- Diff: https://github.com/kamailio/kamailio/commit/65a484dffa3c854bc17068175cee3dc… Patch: https://github.com/kamailio/kamailio/commit/65a484dffa3c854bc17068175cee3dc… --- diff --git a/src/modules/nats/README b/src/modules/nats/README index f7f1ad7239..29cef171b7 100644 --- a/src/modules/nats/README +++ b/src/modules/nats/README @@ -35,6 +35,7 @@ Emmanuel Schmidbauer 4.1. nats_url (str) 4.2. num_publish_workers (int) 4.3. subject_queue_group (str) + 4.4. event_callback (str) 5. Functions @@ -48,9 +49,10 @@ Emmanuel Schmidbauer 1.1. Set nats_url parameter 1.2. Set num_publish_workers parameter 1.3. Set subject_queue_group parameter - 1.4. nats_publish usage - 1.5. Example usage of $natsData pseudo variable - 1.6. Define the event routes + 1.4. Set event_callback parameter + 1.5. nats_publish usage + 1.6. Example usage of $natsData pseudo variable + 1.7. Define the event routes Chapter 1. Admin Guide @@ -68,6 +70,7 @@ Chapter 1. Admin Guide 4.1. nats_url (str) 4.2. num_publish_workers (int) 4.3. subject_queue_group (str) + 4.4. event_callback (str) 5. Functions @@ -115,6 +118,7 @@ Chapter 1. Admin Guide 4.1. nats_url (str) 4.2. num_publish_workers (int) 4.3. subject_queue_group (str) + 4.4. event_callback (str) 4.1. nats_url (str) @@ -161,6 +165,24 @@ modparam("nats", "subject_queue_group", "MyQueue1:2021") modparam("nats", "subject_queue_group", "MyQueue2:2021") ... +4.4. event_callback (str) + + Name of the KEMI function to be executed instead of the event route. + + Default value is not set. + + Example 1.4. Set event_callback parameter +... +modparam("nats", "event_callback", "ksr_nats_event") + +-- event callback function implemented in Lua +function ksr_nats_event(evname) + KSR.info("===== nats module received event: " .. evname .. + ", data:" .. KSR.pv.gete('$natsData') .. "\n"); + return 1; +end +... + 5. Functions 5.1. nats_publish(subject, payload) @@ -169,7 +191,7 @@ modparam("nats", "subject_queue_group", "MyQueue2:2021") Publishes the payload to subject. - Example 1.4. nats_publish usage + Example 1.5. nats_publish usage ... $var(my_info) = "$ci=" + $ci + " $fU=" + $fU; nats_publish("mysubject", "$var(my_info)"); # publish $var(my_info) to "mysubjec @@ -178,7 +200,7 @@ t" 6. Pseudo Variables - Example 1.5. Example usage of $natsData pseudo variable + Example 1.6. Example usage of $natsData pseudo variable ... xlog("L_INFO", "received payload $natsData"); } @@ -191,7 +213,7 @@ t" received payload. The name of the event-route name must match the subject of the message. - Example 1.6. Define the event routes + Example 1.7. Define the event routes ... modparam("nats", "subject_queue_group", "Kamailio-World:2021") modparam("nats", "subject_queue_group", "MyQueue1:2021")

1 0

[kamailio/kamailio] nats: add KEMI publish function and event_callback param (PR #3154)
by Seven Du 24 Jun '22

24 Jun '22

#### Pre-Submission Checklist    - [x] Commit message has the format required by CONTRIBUTING guide - [x] Commits are split per component (core, individual modules, libs, utils, ...) - [x] Each component has a single commit (if not, squash them into one commit) - [ ] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [ ] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  - add `event_callback` KEMI param like in other modules - expose `KSR.nats.publish` I can fix module doc if it looks good. How to generate docs locally btw? You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/3154 -- Commit Summary -- * nats: add KEMI publish function and event_callback param -- File Changes -- M src/modules/nats/defs.h (3) M src/modules/nats/nats_mod.c (88) M src/modules/nats/nats_mod.h (3) M src/modules/nats/nats_pub.c (5) M src/modules/nats/nats_pub.h (1) -- Patch Links -- https://github.com/kamailio/kamailio/pull/3154.patch https://github.com/kamailio/kamailio/pull/3154.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/3154 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/3154(a)github.com>

4 11

git:master:25d42b7e: nats: add KEMI publish function and event_callback param (#3154)
by GitHub 24 Jun '22

24 Jun '22

Module: kamailio Branch: master Commit: 25d42b7e69cc6242c66887a2816499d841e3ba89 URL: https://github.com/kamailio/kamailio/commit/25d42b7e69cc6242c66887a2816499d… Author: Seven Du <dujinfang(a)gmail.com> Committer: GitHub <noreply(a)github.com> Date: 2022-06-24T12:44:28+02:00 nats: add KEMI publish function and event_callback param (#3154) --- Modified: src/modules/nats/defs.h Modified: src/modules/nats/doc/nats_admin.xml Modified: src/modules/nats/nats_mod.c Modified: src/modules/nats/nats_mod.h Modified: src/modules/nats/nats_pub.c Modified: src/modules/nats/nats_pub.h --- Diff: https://github.com/kamailio/kamailio/commit/25d42b7e69cc6242c66887a2816499d… Patch: https://github.com/kamailio/kamailio/commit/25d42b7e69cc6242c66887a2816499d…

1 0

git:5.6:967b8290: topos_redis: use tag based on direction for early dialog transaction record loading
by Daniel-Constantin Mierla 24 Jun '22

24 Jun '22

Module: kamailio Branch: 5.6 Commit: 967b8290d1e5081966425cbf705bd4ba36d5e98e URL: https://github.com/kamailio/kamailio/commit/967b8290d1e5081966425cbf705bd4b… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2022-06-24T11:09:40+02:00 topos_redis: use tag based on direction for early dialog transaction record loading - GH #3112 (cherry picked from commit 06679174fc3d9cc6a18bc3edc7f2fb985c50d27b) --- Modified: src/modules/topos_redis/topos_redis_storage.c --- Diff: https://github.com/kamailio/kamailio/commit/967b8290d1e5081966425cbf705bd4b… Patch: https://github.com/kamailio/kamailio/commit/967b8290d1e5081966425cbf705bd4b… --- diff --git a/src/modules/topos_redis/topos_redis_storage.c b/src/modules/topos_redis/topos_redis_storage.c index 456d54ebee5..a1d6c85d016 100644 --- a/src/modules/topos_redis/topos_redis_storage.c +++ b/src/modules/topos_redis/topos_redis_storage.c @@ -54,6 +54,11 @@ static str _tps_redis_dprefix = str_init("d:z:"); static char _tps_redis_cbuf[TPS_REDIS_DATA_SIZE]; +static str _tps_redis_empty = str_init(""); + +#define TPS_REDIS_STRZ(_s) ((_s).s)?(_s):(_tps_redis_empty) + + /** * storage keys */ @@ -594,6 +599,7 @@ int tps_redis_load_initial_method_branch(sip_msg_t *msg, tps_data_t *md, tps_dat str skey = STR_NULL; str sval = STR_NULL; str xuuid = str_init(""); + str xtag = str_init(""); str smethod = str_init("INVITE"); if(msg==NULL || md==NULL || sd==NULL) @@ -615,6 +621,11 @@ int tps_redis_load_initial_method_branch(sip_msg_t *msg, tps_data_t *md, tps_dat memset(argvlen, 0, TPS_REDIS_NR_KEYS * sizeof(size_t)); argc = 0; + if(md->direction==TPS_DIR_DOWNSTREAM) { + xtag = TPS_REDIS_STRZ(md->b_tag); + } else { + xtag = TPS_REDIS_STRZ(md->a_tag); + } if(md->a_uuid.len>1) { xuuid.s = md->a_uuid.s + 1; xuuid.len = md->a_uuid.len - 1; @@ -641,7 +652,7 @@ int tps_redis_load_initial_method_branch(sip_msg_t *msg, tps_data_t *md, tps_dat _tps_redis_bprefix.len, _tps_redis_bprefix.s, smethod.len, smethod.s, md->a_callid.len, md->a_callid.s, - md->b_tag.len, md->b_tag.s, + xtag.len, xtag.s, xuuid.len, xuuid.s); if(rkey.len<0 || rkey.len>=TPS_REDIS_DATA_SIZE) { LM_ERR("error or insufficient buffer size: %d\n", rkey.len);

1 0

git:5.6:45c3b1b6: topos: don't insert contact header for 4xx replies
by Daniel-Constantin Mierla 24 Jun '22

24 Jun '22

Module: kamailio Branch: 5.6 Commit: 45c3b1b6cd97b610ca3bd8753df44e14ec780b22 URL: https://github.com/kamailio/kamailio/commit/45c3b1b6cd97b610ca3bd8753df44e1… Author: Victor Seva <vseva(a)sipwise.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2022-06-24T11:08:52+02:00 topos: don't insert contact header for 4xx replies unless original msg has contact (cherry picked from commit f49f14a87606314e98a253ee29b1624ae814dccf) --- Modified: src/modules/topos/tps_msg.c --- Diff: https://github.com/kamailio/kamailio/commit/45c3b1b6cd97b610ca3bd8753df44e1… Patch: https://github.com/kamailio/kamailio/commit/45c3b1b6cd97b610ca3bd8753df44e1… --- diff --git a/src/modules/topos/tps_msg.c b/src/modules/topos/tps_msg.c index c01dde7b3f..a3f123b593 100644 --- a/src/modules/topos/tps_msg.c +++ b/src/modules/topos/tps_msg.c @@ -1167,6 +1167,11 @@ int tps_response_sent(sip_msg_t *msg) && msg->contact==NULL) { contact_keep = 1; } + if(contact_keep==0 && msg->first_line.u.reply.statuscode>=400 + && msg->first_line.u.reply.statuscode<500 + && msg->contact==NULL) { + contact_keep = 1; + } if(contact_keep==0) { tps_remove_headers(msg, HDR_CONTACT_T); if(direction==TPS_DIR_DOWNSTREAM) {

1 0

git:5.6:82edf7a4: acc: Fix reason code for locally generated replies. (#3137)
by Daniel-Constantin Mierla 24 Jun '22

24 Jun '22

Module: kamailio Branch: 5.6 Commit: 82edf7a447a770f1cd2c97a05ad128255898586a URL: https://github.com/kamailio/kamailio/commit/82edf7a447a770f1cd2c97a05ad1282… Author: Frits Wiersma <cfwiersma(a)solcon.nl> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2022-06-24T11:09:09+02:00 acc: Fix reason code for locally generated replies. (#3137) * acc: Fix reason code for locally generated replies. - Use heap memory for the reason code instead of the stack memory. - See issue #2981 * acc: Remove code which was commented out. - Code was commented out in the previous pull request. (#3137). - This has now been corrected. (cherry picked from commit e74cb2371ab879874a8981818139024f1c2beb9e) --- Modified: src/modules/acc/acc_logic.c --- Diff: https://github.com/kamailio/kamailio/commit/82edf7a447a770f1cd2c97a05ad1282… Patch: https://github.com/kamailio/kamailio/commit/82edf7a447a770f1cd2c97a05ad1282… --- diff --git a/src/modules/acc/acc_logic.c b/src/modules/acc/acc_logic.c index e045b8c95ac..169a4222fbf 100644 --- a/src/modules/acc/acc_logic.c +++ b/src/modules/acc/acc_logic.c @@ -93,25 +93,20 @@ void env_set_totag(struct cell *t, struct sip_msg *reply) tmb.t_get_reply_totag(t->uas.request, &acc_env.to_tag); } -int env_set_reason(struct sip_msg *reply, str *buff) { - int i; - char *p; +int env_set_reason(struct sip_msg *reply, str *buff, int code) { + if (reply!=FAKED_REPLY || !buff || !buff->s || buff->len < 20) return 0; if (strncmp(buff->s, "SIP/2.0 ", 8) != 0) { LM_ERR("not a SIP reply\n"); return 0; } - p = buff->s + 12; - for (i=12;i<buff->len;i++) { - if (*p == '\r' || *p == '\n') { - acc_env.reason.s = buff->s+12; - acc_env.reason.len = i-12; - LM_DBG("reason[%.*s]\n", acc_env.reason.len, acc_env.reason.s); - return 1; - } - p++; - } + + /* Set the reason to a pointer in heap memory. It will contain the last seen FAKED_REPLY */ + acc_env.reason.s = error_text(code); + acc_env.reason.len = strlen(acc_env.reason.s); + LM_DBG("reason[%.*s]\n", acc_env.reason.len, acc_env.reason.s); + return 0; } @@ -139,7 +134,8 @@ static inline void env_set_code_status( int code, struct sip_msg *reply) acc_env.code_s.s = int2bstr((unsigned long)code, code_buf, &acc_env.code_s.len); /* reason */ - if (acc_env.reason.len == 0) { /* already extracted in case of locally generated replies */ + /* In case of an ACK the reply == NULL, but the reason must be set when report_ack is 1 */ + if (acc_env.reason.len == 0 || reply==NULL) { /* already extracted in case of locally generated replies */ acc_env.reason.s = error_text(code); acc_env.reason.len = strlen(acc_env.reason.s); } @@ -719,7 +715,7 @@ static void tmcb_func( struct cell* t, int type, struct tmcb_params *ps ) LM_DBG("acc callback called for t(%p) event type %d, reply code %d\n", t, type, ps->code); if (type&TMCB_RESPONSE_OUT) { - env_set_reason(ps->rpl, &ps->send_buf); + env_set_reason(ps->rpl, &ps->send_buf, ps->code); acc_onreply( t, ps->req, ps->rpl, ps->code); } else if (type&TMCB_E2EACK_IN) { acc_onack( t, t->uas.request, ps->req, ps->code);

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev