I have found the problem.
When msg_apply_changes() copies the sip_msg structure, it copies
msg_flags which includes FL_HASH_INDEX indicating that the
hash_index is valid (which is now zero).
I have attached a patch which updates the msg_apply_changes()
function to copy the hash_index as it is in the original msg. This
will be valid if the flag is set, and therefore avoid unecessary
hash calculation.
Hugh
On 05/10/2011 15:25, Hugh Waite wrote:
We have discovered the cause of the problem I described, but we
still do not understand why.
After a SIP request arrives we make some changes to the
P-Preferred/Asserted-Identity headers after our own validation.
To allow these changes to be visible later (e.g. in $hdr()
variables) we call msg_apply_changes(). It seems that calling
this function causes the transaction matching to fail for
subsequent messages (e.g. ACK and CANCEL).
Non-Working Example:
append_hf("My-Header: yes\r\n");
msg_apply_changes();
if (is_present_hf("My-Header"))
{
# log("Found my header") - this gets run
}
t_relay();
If the destination responds with a 4XX then the ACK does not
match and the 4XX is retransmitted.
If a CANCEL is sent, then it does not match and is not relayed.
Working Example:
append_hf("My-Header: yes\r\n");
if (is_present_hf("My-Header"))
{
# log("Found my header") - this does not get run
}
t_relay();
In this example, the header is not found, but the transaction
matching works properly
Is this something to do with re-parsing the request? And is it a
bug to be investigated?
Regards,
Hugh
On 04/10/2011 15:15, Hugh Waite wrote:
We are seeing an issue with ACKs to failure
responses.
Our config is set up to forward an INVITE to another
destination. It replies with a 407 Auth Required. Kamailio
sends an ACK to the destination and relays the 407 back to the
source. The source sends an ACK, but this always fails the
transaction match, so kamailio keeps retransmitting the 407
(when using UDP)
UA KAM UA
-- INVITE --> -- INVITE -->
<-- 407 --
-- ACK -->
<-- 407 --
-- ACK -->
...
<-- 407 -- (retrans)
-- ACK -->
I wondered if it was the same issue as the stateless reply
(Flyspray #154), but this happens when we do a t_relay.
Basically, when t_check_trans() is called for the ACK, it does
not terminate the script. I have worked my way into the
t_check_trans() code and found that it does not find a
matching transaction; matching_3261() in t_lookup.c returns 0
because there are no entries in that hash bucket.
Does anyone understand why this may be happening?
Regards,
Hugh
--
--
Hugh Waite
Senior Design Engineer
Crocodile RCS Ltd.
_______________________________________________
sr-dev mailing list
sr-dev@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
--
Hugh Waite
Senior Design Engineer
Crocodile RCS Ltd.
_______________________________________________
sr-dev mailing list
sr-dev@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev