9 Nov
2009
9 Nov
'09
8:38 p.m.
Andrei Pelinescu-Onciul schrieb:
On Nov 09, 2009 at 13:08, Juha Heinanen
<jh(a)tutpro.com> wrote:
Isn't that already handled by record-routing? AFAIK RR header contains
the socket on which the request was received, and if incoming and
outgoing socket differ, then double-RR is used. Thus, isn't the
send-socket not already set after loose_route()?
This already works fine with fix_nated_contact(), and the new alias_...
functions do not change routing, the just preserve the original contact URI.
regards
klaus
Andrei Pelinescu-Onciul writes:
You will need also to save the local ip:port on which the packet is
received by the proxy. They will be needed when forwarding a packet with
and alias in r-uri, to make sure the same socket/ip:port will be used
for sending (or else it won't work with nats if you have several listen
addresses). I have somewhere a function that does just that
(using the above
format). I used it a long time ago for load balancing (IIRC lb added
received="..." to nated contacts when forwarding to the proxies behind
it and removed "received" from r-uri, set the proper send socket based
on dstip and the destination based on the received=uri when forwarding a
message from a proxy to the outside world).
I can create a new module for it (if it's not already in one of
them).
andrei,
there is a long thread on this and the needed functions have already
been written.