Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you are subscribed to this thread.
my intention was to register to secondary remote proxy when primary remote proxy fails.
iam using uac module for remote registration
here i will ping the primary and secondary proxy using dispatcher module
when the proxy is down, i will send registration to the other proxy which is up.
17(26) CRITICAL: <core> [core/mem/q_malloc.c:501]: qm_free(): BUG: bad pointer 0x7fa7ec666479 (out of memory block!) called from core: core/action.c: do_action(757) - ignoring
17(26) INFO: tm [t_lookup.c:1333]: t_newtran(): attempt to create transaction for a faked request - try to avoid it
17(26) NOTICE: tm [t_reply.c:2159]: relay_reply(): dst no longer set - skipped sending the reply out
basic_block
### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR
#!ifdef WITH_DEBUG
debug=4
log_stderror=yes
#!else
debug=2
log_stderror=no
#!endif
memdbg=5
memlog=5
log_facility=LOG_LOCAL0
log_prefix="{$mt $hdr(CSeq) $ci} "
/* number of SIP routing processes */
children=8
/* uncomment the next line to disable TCP (default on) */
# disable_tcp=yes
/* uncomment the next line to disable the auto discovery of local aliases
* based on reverse DNS on IPs (default on) */
# auto_aliases=no
/* add local domain aliases */
# alias="sip.mydomain.com"
/* uncomment and configure the following line if you want Kamailio to
* bind on a specific interface/port/proto (default bind on all available) */
# listen=udp:10.0.0.10:5060
#!ifdef WITH_TLS
enable_tls=yes
#!endif
/* life time of TCP connection when there is no traffic
* - a bit higher than registration expires to cope with UA behind NAT */
tcp_connection_lifetime=3605
####### Custom Parameters #########
/* These parameters can be modified runtime via RPC interface
* - see the documentation of 'cfg_rpc' module.
*
* Format: group.id = value 'desc' description
* Access: $sel(cfg_get.group.id) or @cfg_get.group.id */
#!ifdef WITH_PSTN
/* PSTN GW Routing
*
* - pstn.gw_ip: valid IP or hostname as string value, example:
* pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address"
*
* - by default is empty to avoid misrouting */
pstn.gw_ip = "" desc "PSTN GW Address"
pstn.gw_port = "" desc "PSTN GW Port"
#!endif
#!ifdef WITH_VOICEMAIL
/* VoiceMail Routing on offline, busy or no answer
*
* - by default Voicemail server IP is empty to avoid misrouting */
voicemail.srv_ip = "" desc "VoiceMail IP Address"
voicemail.srv_port = "5060" desc "VoiceMail Port"
#!endif
####### Modules Section ########
/* set paths to location of modules */
# mpath="/usr/lib/x86_64-linux-gnu/kamailio/modules/"
#!ifdef WITH_MYSQL
loadmodule "db_mysql.so"
#!endif
loadmodule "jsonrpcs.so"
loadmodule "kex.so"
loadmodule "corex.so"
loadmodule "tm.so"
loadmodule "tmx.so"
loadmodule "sl.so"
loadmodule "rr.so"
loadmodule "ipops.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "sanity.so"
loadmodule "ctl.so"
loadmodule "cfg_rpc.so"
loadmodule "acc.so"
loadmodule "counters.so"
#!ifdef WITH_AUTH
loadmodule "auth.so"
loadmodule "auth_db.so"
#!ifdef WITH_IPAUTH
loadmodule "permissions.so"
#!endif
#!endif
#!ifdef WITH_ALIASDB
loadmodule "alias_db.so"
#!endif
#!ifdef WITH_SPEEDDIAL
loadmodule "speeddial.so"
#!endif
#!ifdef WITH_MULTIDOMAIN
loadmodule "domain.so"
#!endif
#!ifdef WITH_PRESENCE
loadmodule "presence.so"
loadmodule "presence_xml.so"
#!endif
#!ifdef WITH_NAT
loadmodule "nathelper.so"
loadmodule "rtpproxy.so"
#!endif
#!ifdef WITH_TLS
loadmodule "tls.so"
#!endif
#!ifdef WITH_ANTIFLOOD
loadmodule "htable.so"
loadmodule "pike.so"
#!endif
#!ifdef WITH_XMLRPC
loadmodule "xmlrpc.so"
#!endif
#!ifdef WITH_DEBUG
loadmodule "debugger.so"
#!endif
# ----------------- setting module-specific parameters ---------------
# ----- jsonrpcs params -----
modparam("jsonrpcs", "pretty_format", 1)
/* set the path to RPC fifo control file */
# modparam("jsonrpcs", "fifo_name", "/var/run/kamailio/kamailio_rpc.fifo")
/* set the path to RPC unix socket control file */
# modparam("jsonrpcs", "dgram_socket", "/var/run/kamailio/kamailio_rpc.sock")
# ----- ctl params -----
/* set the path to RPC unix socket control file */
# modparam("ctl", "binrpc", "unix:/var/run/kamailio/kamailio_ctl")
# ----- tm params -----
# auto-discard branches from previous serial forking leg
#modparam("tm", "failure_reply_mode", 3)
# default retransmission timeout: 30sec
modparam("tm", "fr_timer", 2000)
# default invite retransmission timeout after 1xx: 120sec
modparam("tm", "fr_inv_timer", 40000)
# ----- rr params -----
# set next param to 1 to add value to ;lr param (helps with some UAs)
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 1)
#modparam("rr", "enable_double_rr", 2)
# ----- registrar params -----
modparam("registrar", "method_filtering", 1)
/* uncomment the next line to disable parallel forking via location */
# modparam("registrar", "append_branches", 0)
/* uncomment the next line not to allow more than 10 contacts per AOR */
# modparam("registrar", "max_contacts", 10)
/* max value for expires of registrations */
modparam("registrar", "max_expires", 3600)
/* set it to 1 to enable GRUU */
modparam("registrar", "gruu_enabled", 0)
# ----- acc params -----
/* what special events should be accounted ? */
modparam("acc", "early_media", 0)
modparam("acc", "report_ack", 0)
modparam("acc", "report_cancels", 0)
/* by default ww do not adjust the direct of the sequential requests.
* if you enable this parameter, be sure the enable "append_fromtag"
* in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "log_flag", FLT_ACC)
modparam("acc", "log_missed_flag", FLT_ACCMISSED)
modparam("acc", "log_extra",
"src_user=$fU;src_domain=$fd;src_ip=$si;"
"dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
modparam("acc", "failed_transaction_flag", FLT_ACCFAILED)
/* enhanced DB accounting */
#!ifdef WITH_ACCDB
modparam("acc", "db_flag", FLT_ACC)
modparam("acc", "db_missed_flag", FLT_ACCMISSED)
modparam("acc", "db_url", DBURL)
modparam("acc", "db_extra",
"src_user=$fU;src_domain=$fd;src_ip=$si;"
"dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
#!endif
# ----- usrloc params -----
/* enable DB persistency for location entries */
#!ifdef WITH_USRLOCDB
modparam("usrloc", "db_url", DBURL)
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "use_domain", MULTIDOMAIN)
#!endif
# ----- auth_db params -----
#!ifdef WITH_AUTH
modparam("auth_db", "db_url", DBURL)
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "load_credentials", "")
modparam("auth_db", "use_domain", MULTIDOMAIN)
# ----- permissions params -----
#!ifdef WITH_IPAUTH
modparam("permissions", "db_url", DBURL)
modparam("permissions", "db_mode", 1)
#!endif
#!endif
# ----- alias_db params -----
#!ifdef WITH_ALIASDB
modparam("alias_db", "db_url", DBURL)
modparam("alias_db", "use_domain", MULTIDOMAIN)
#!endif
# ----- speeddial params -----
#!ifdef WITH_SPEEDDIAL
modparam("speeddial", "db_url", DBURL)
modparam("speeddial", "use_domain", MULTIDOMAIN)
#!endif
# ----- domain params -----
#!ifdef WITH_MULTIDOMAIN
modparam("domain", "db_url", DBURL)
/* register callback to match myself condition with domains list */
modparam("domain", "register_myself", 1)
#!endif
#!ifdef WITH_PRESENCE
# ----- presence params -----
modparam("presence", "db_url", DBURL)
# ----- presence_xml params -----
modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml", "force_active", 1)
#!endif
#!ifdef WITH_NAT
# ----- rtpproxy params -----
modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722")
# ----- nathelper params -----
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)
modparam("nathelper", "sipping_from", "sip:pinger@kamailio.org")
# params needed for NAT traversal in other modules
modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)")
modparam("usrloc", "nat_bflag", FLB_NATB)
#!endif
#!ifdef WITH_TLS
# ----- tls params -----
modparam("tls", "config", "/etc/kamailio/tls.cfg")
#!endif
#!ifdef WITH_ANTIFLOOD
# ----- pike params -----
modparam("pike", "sampling_time_unit", 2)
modparam("pike", "reqs_density_per_unit", 16)
modparam("pike", "remove_latency", 4)
# ----- htable params -----
/* ip ban htable with autoexpire after 5 minutes */
modparam("htable", "htable", "ipban=>size=8;autoexpire=300;")
#!endif
#!ifdef WITH_XMLRPC
# ----- xmlrpc params -----
modparam("xmlrpc", "route", "XMLRPC");
modparam("xmlrpc", "url_match", "^/RPC")
#!endif
#!ifdef WITH_DEBUG
# ----- debugger params -----
modparam("debugger", "cfgtrace", 1)
modparam("debugger", "log_level_name", "exec")
#!endif
uac_block
#!KAMAILIO
loadmodule "uac.so"
loadmodule "db_sqlite.so"
modparam("uac", "reg_contact_addr", UAC_CONTACT_ADD)
modparam("uac", "reg_db_url", "sqlite:///etc/kamailio/dbs/uac_reg.db")
modparam("uac", "reg_retry_interval", 10)
dispatcher_block
#!KAMAILIO
loadmodule "dispatcher.so"
modparam("dispatcher", "force_dst", 1)
modparam("dispatcher", "flags", 2)
modparam("dispatcher", "xavp_dst", "dsdst")
modparam("dispatcher", "xavp_dst_mode", 0)
modparam("dispatcher", "ds_probing_mode", 1)
modparam("dispatcher", "ds_ping_interval", 15)
#modparam("dispatcher", "ds_ping_reply_codes", "class=2;class=3;class=4")
modparam("dispatcher", "list_file", "/etc/kamailio/dispatcher.list")
route_block
event_route[dispatcher:dst-down] {
xlog("L_ERR", "Destination down: $rm $ru ($du)\n");
$var(status) = uac_reg_status("+91XXX6");
xlog("L_NOTICE", "+91XXX_state : $var(status)\n\r");
if(uac_reg_request_to("+91XXX", 0))
{
xlog("L_NOTICE", "Found remote user [$rU] on [$rd] via [$du]");
t_on_failure("REMOTE_AUTH");
$du="sip:10.*.32.1:5060";
t_relay();
}
}
failure_route[REMOTE_AUTH] {
if ($T_reply_code == 401 or $T_reply_code == 407) {
xlog("L_NOTICE", "Remote asked for authentication");
uac_auth();
}
}
17(26) ERROR: <script>: Destination down: OPTIONS sip:10.*.32.1:5060 (<null>)
17(26) NOTICE: <script>: 91XXX_state : 1
17(26) CRITICAL: <core> [core/mem/q_malloc.c:501]: qm_free(): BUG: bad pointer 0x7fa7ec666479 (out of memory block!) called from core: core/action.c: do_action(757) - ignoring
17(26) NOTICE: <script>: Found remote user [91XXX] on [sip.siptrunk.in] via [sip:10.*.33.1:5060]
17(26) INFO: tm [t_lookup.c:1333]: t_newtran(): attempt to create transaction for a faked request - try to avoid it
17(26) NOTICE: tm [t_reply.c:2159]: relay_reply(): dst no longer set - skipped sending the reply out
(paste your sip traffic here)
kamailio -v docker image kamailio/kamailio:5.4.6-buster
"Debian GNU/Linux 10 (buster)"
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you are subscribed to this thread.