[sr-dev] [tracker] Task opened: Kamailio 1.5 Dispatcher (minor) problem.

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. A new Flyspray task has been opened. Details are below. User who did this - Geoff Mina (geoff2010) Attached to Project - sip-router Summary - Kamailio 1.5 Dispatcher (minor) problem. Task Type - Bug Report Category - Module Status - Unconfirmed Assigned To - Operating System - Linux Severity - Low Priority - Normal Reported Version - Development Due in Version - Undecided Due Date - Undecided Details - I am experiencing an issue with Kamailio 1.5 and the Dispatcher module. I have 2 network cards eth0 - public network interface. I actually have eth0 and eth0:1 with two public IPs bound to the interface eth1 - private network interface. The issue is that when I do not explicitly specify the "listen" configuration parameter, all my dispatch destinations NOT on the same public subnet get stuck in "P" state and never have calls routed to them. I have two datacenters which house racks of asterisk servers. My carriers send all SIP traffic to my primary SIP gateway, which then distributes the INVITE requests across the public internet to distribute the load between my two facilities. If I leave out the listen statements below, the asterisk servers outside of my 208.X.X.X network won't receive calls. When I include those lines, everything works fine. ###### Global Parameters ##### debug=1 log_stderror=no log_facility=LOG_LOCAL0 fork=yes children=16 disable_tcp=yes ##### ## These are the lines in question. ## Remove and things break, include and we are OK ##### listen=208.X.X.X:5060 listen=208.X.X.Y:5060 listen=10.3.200.201:5060 ## Enable Dispatcher module ## loadmodule "dispatcher.so" modparam("dispatcher","flags",2) modparam("dispatcher","db_url","mysql://appservers:appservers@localhost/kamailio") modparam("dispatcher","table_name","dispatcher") modparam("dispatcher","dst_avp","$avp(i:271)") modparam("dispatcher","grp_avp","$avp(i:272)") modparam("dispatcher","cnt_avp","$avp(i:273)") modparam("dispatcher","ds_ping_method","OPTIONS") modparam("dispatcher","ds_ping_from","sip:monitoring@mydomain.com") modparam("dispatcher","ds_ping_interval",30) modparam("dispatcher","ds_probing_mode",1) modparam("dispatcher","ds_probing_threshhold", 2) More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=40 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.