event_route[xhttp:request] {

set_reply_close();

set_reply_no_connect();

# if ($Rp != MY_WS_PORT && $Rp != MY_WSS_PORT) {

# xlog("L_WARN", "HTTP request received on $Rp\n");

# xhttp_reply("403", "Forbidden", "", "");

# exit;

# }

xlog("L_ALERT", "HTTP Request Received\n");

if ($hdr(Upgrade)=~"websocket"

&& $hdr(Connection)=~"Upgrade"

&& $rm=~"GET") {

xlog("L_DBG", "WebSocket\n");

xlog("L_DBG", " Host: $hdr(Host)\n");

xlog("L_DBG", " Origin: $hdr(Origin)\n");

# if ($hdr(Host) == $null || !is_myself($hdr(Host))) {

# xlog("L_WARN", "Bad host $hdr(Host)\n");

# xhttp_reply("403", "Forbidden", "", "");

# exit;

# }

# Optional... validate Origin

# Optional... perform HTTP authentication

# ws_handle_handshake() exits (no further configuration file

# processing of the request) when complete.

if (ws_handle_handshake())

return;

}

xhttp_reply("404", "Not found", "", "");

}

On Tue, Aug 14, 2012 at 6:13 PM, Juan Castro <jcastro@instant.com.br> wrote:

Well, not the simpl5.org site itself, since it uses its own
Websocket-SIP gateway to make calls. I downloaded their code and
changed the gateway address from "sipml5.org" to "192.168.0.148" which
is the VM where I'm testing. Also, Apache is using ports 8000 and 4443
since Kamailio uses 80 and 443.

But when I try to make a call, filling 192.168.0.48 as the realm, I
get "Disconnected: Failed to connet to the server" from the call.htm
page. I monitored packets with Wireshark and I see no traffic that
would make sense between the machine with the browser and the one with
Kamailio. I suspect I have to make more changes in the sipml5.org
Javascript, am I correct?

Kamailio itself (Dev version) is up and running and normal SIP from
normal UAs works. Here's the config I'm using. It's the example in the
websocket module directory, just changed to use my db and the default
TLS cert that was installed:

----------------------------------------------------------------------
#!KAMAILIO
#
# Simple/sample kamailio.cfg for running a proxy/registrar with TLS and
# WebSockets support.

#!substdef "!DBURL!mysql://ser:heslo@localhost/ser!g"
#!substdef "!MY_IP_ADDR!192.168.0.148!g"
#!substdef "!MY_WS_PORT!80!g"
#!substdef "!MY_WSS_PORT!443!g"
#!substdef "!MY_WS_ADDR!tcp:MY_IP_ADDR:MY_WS_PORT!g"
#!substdef "!MY_WSS_ADDR!tls:MY_IP_ADDR:MY_WSS_PORT!g"

##!define LOCAL_TEST_RUN
#!define WITH_TLS
#!define WITH_WEBSOCKETS

####### Global Parameters #########

fork=yes
children=4

#alias="example.com"

#!ifdef WITH_TLS
enable_tls=1
#!endif

listen=MY_IP_ADDR
#!ifdef WITH_WEBSOCKETS
listen=MY_WS_ADDR
#!ifdef WITH_TLS
listen=MY_WSS_ADDR
#!endif
#!endif

tcp_connection_lifetime=3604
tcp_accept_no_cl=yes
tcp_rd_buf_size=16384

syn_branch=0
debug=2

# set paths to location of modules (to sources or installation folders)
#!ifdef WITH_SRCPATH
mpath="modules_k:modules"
#!else
mpath="/usr/local/kamailio/lib/kamailio/modules_k/:/usr/local/kamailio/lib/kamailio/modules/"
#!endif

loadmodule "db_mysql.so"
loadmodule "tm.so"
loadmodule "sl.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "sanity.so"
loadmodule "ctl.so"
loadmodule "auth.so"
loadmodule "auth_db.so"
loadmodule "kex.so"
loadmodule "mi_rpc.so"
#!ifdef WITH_TLS
loadmodule "tls.so"
#!endif
#!ifdef WITH_WEBSOCKETS
loadmodule "xhttp.so"
loadmodule "websocket.so"
loadmodule "nathelper.so"
#!endif

# ----------------- setting module-specific parameters ---------------

# ----- tm params -----
# auto-discard branches from previous serial forking leg
modparam("tm", "failure_reply_mode", 3)
# default retransmission timeout: 30sec
modparam("tm", "fr_timer", 30000)
# default invite retransmission timeout after 1xx: 120sec
modparam("tm", "fr_inv_timer", 120000)

# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)

# ----- registrar params -----
modparam("registrar", "method_filtering", 1)
modparam("registrar", "max_expires", 3600)
modparam("registrar", "gruu_enabled", 0)

# ----- usrloc params -----
modparam("usrloc", "db_url", "DBURL")
modparam("usrloc", "db_mode", 0)

# ----- auth_db params -----
modparam("auth_db", "db_url", "DBURL")
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "load_credentials", "")

#!ifdef WITH_TLS
# ----- tls params -----
modparam("tls", "config", "/usr/local/kamailio/etc/kamailio/tls.cfg")
#!endif

#!ifdef WITH_WEBSOCKETS
# ----- nathelper params -----
modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)")
# Note: leaving NAT pings turned off here as nathelper is _only_ being used for
# WebSocket connections. NAT pings are not needed as WebSockets have
# their own keep-alives.
#!endif

####### Routing Logic ########

# Main SIP request routing logic
# - processing of any incoming SIP request starts with this route
# - note: this is the same as route { ... }
request_route {

# per request initial checks
route(REQINIT);

#!ifdef WITH_WEBSOCKETS
if (nat_uac_test(64)) {
# Do NAT traversal stuff for requests from a WebSocket
# connection - even if it is not behind a NAT!
# This won't be needed in the future if Kamailio and the
# WebSocket client support Outbound and Path.
force_rport();
if (is_method("REGISTER"))
fix_nated_register();
else {
if (!add_contact_alias()) {
xlog("L_ERR", "Error aliasing contact <$ct>\n");
sl_send_reply("400", "Bad Request");
exit;
}
}
}
#!endif

# handle requests within SIP dialogs
route(WITHINDLG);

### only initial requests (no To tag)

# CANCEL processing
if (is_method("CANCEL")) {
if (t_check_trans())
t_relay();
exit;
}

t_check_trans();

# authentication
route(AUTH);

# record routing for dialog forming requests (in case they are routed)
# - remove preloaded route headers
remove_hf("Route");
if (is_method("INVITE"))
record_route();

# handle registrations
route(REGISTRAR);

if ($rU==$null) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}

# user location service
route(LOCATION);

route(RELAY);
}

route[RELAY] {
if (!t_relay()) {
sl_reply_error();
}
exit;
}

# Per SIP request initial checks
route[REQINIT] {
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}

if(!sanity_check("1511", "7")) {
xlog("Malformed SIP message from $si:$sp\n");
exit;
}
}

# Handle requests within SIP dialogs
route[WITHINDLG] {
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
#!ifdef WITH_WEBSOCKETS
if ($du == "") {
if (!handle_ruri_alias()) {
xlog("L_ERR", "Bad alias <$ru>\n");
sl_send_reply("400", "Bad Request");
exit;
}
}
#!endif
route(RELAY);
} else {
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# no loose-route, but stateful ACK;
# must be an ACK after a 487
# or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction...
# ignore and discard
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
}

# Handle SIP registrations
route[REGISTRAR] {
if (is_method("REGISTER")) {
if (!save("location"))
sl_reply_error();

exit;
}
}

# USER location service
route[LOCATION] {
if (!lookup("location")) {
$var(rc) = $rc;
t_newtran();
switch ($var(rc)) {
case -1:
case -3:
send_reply("404", "Not Found");
exit;
case -2:
send_reply("405", "Method Not Allowed");
exit;
}
}
}

# Authentication route
route[AUTH] {
if (is_method("REGISTER") || from_uri==myself) {
# authenticate requests
if (!auth_check("$fd", "subscriber", "1")) {
auth_challenge("$fd", "0");
exit;
}
# user authenticated - remove auth header
if(!is_method("REGISTER"))
consume_credentials();
}
# if caller is not local subscriber, then check if it calls
# a local destination, otherwise deny, not an open relay here
if (from_uri!=myself && uri!=myself) {
sl_send_reply("403","Not relaying");
exit;
}
}

#!ifdef WITH_WEBSOCKETS
onreply_route {
if (nat_uac_test(64)) {
# Do NAT traversal stuff for replies to a WebSocket connection
# - even if it is not behind a NAT!
# This won't be needed in the future if Kamailio and the
# WebSocket client support Outbound and Path.
add_contact_alias();
}
}

event_route[xhttp:request] {
set_reply_close();
set_reply_no_connect();

if ($Rp != MY_WS_PORT && $Rp != MY_WSS_PORT) {
xlog("L_WARN", "HTTP request received on $Rp\n");
xhttp_reply("403", "Forbidden", "", "");
exit;
}

xlog("L_DBG", "HTTP Request Received\n");

if ($hdr(Upgrade)=~"websocket"
&& $hdr(Connection)=~"Upgrade"
&& $rm=~"GET") {
xlog("L_DBG", "WebSocket\n");
xlog("L_DBG", " Host: $hdr(Host)\n");
xlog("L_DBG", " Origin: $hdr(Origin)\n");

if ($hdr(Host) == $null || !is_myself($hdr(Host))) {
xlog("L_WARN", "Bad host $hdr(Host)\n");
xhttp_reply("403", "Forbidden", "", "");
exit;
}

# Optional... validate Origin
# Optional... perform HTTP authentication

# ws_handle_handshake() exits (no further configuration file
# processing of the request) when complete.
if (ws_handle_handshake())
{
# Optional... cache some information abou the
# successful connection
exit;
}
}

xhttp_reply("404", "Not found", "", "");
}

event_route[websocket:closed] {
xlog("L_INFO", "WebSocket connection from $si:$sp has closed\n");
}
#!endif
----------------------------------------------------------------------

--
Juan Carlos Castro y Castro
Instant Solutions - Telefonia Gerando Resultado
http://www.instant.com.br
Principais capitais: 4063-6100
Demais regiões: (11)4063-6100

_______________________________________________
sr-dev mailing list
sr-dev@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev