[kamailio/kamailio] core.debug value changed via fifo/rpc gets lots after t_suspend()/t_continue() (#708)
13 Jul
2016
13 Jul
'16
12:51 p.m.
in kamailio.cfg I have
``
debug=1
``
setting debug level to 2 in the command line
``
kamctl fifo debug 2
``
or
``
kamcmd proxy cfg.set_now_int core debug 2
``
works fine until the process does t_suspend() after t_continue() logs are debug level 1
only
---
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/kamailio/kamailio/issues/708
13 Jul
13 Jul
1:08 p.m.
using
```
loadmodule "debugger.so"
modparam("debugger", "mod_level_mode", 1)
modparam("debugger", "mod_hash_size", 4)
modparam("debugger", "mod_level", "core=1")
modparam("debugger", "mod_level", "xlog=1")
modparam("debugger", "mod_level", "tm=3")
```
and ``kamcmd dbg.set_mod_level xlog 2`` works fine
---
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/kamailio/kamailio/issues/708#issuecomment-232349202
1:20 p.m.
example using debug=1 and ``kamctl fifo debug 2``
```
2016-07-13T15:15:32.930931+02:00 sp1 proxy[1285]: INFO: <script>: Callee block mode
is 'blacklist' - R=sip:testuser1001@spce.test ID=NGCP%invite%///1-1862(a)127.126.0.1
UA='<null>'
2016-07-13T15:15:32.934331+02:00 sp1 proxy[1285]: NOTICE: <script>: Dispatch LNP
request for a/b-number '4311002/4311001' - R=sip:testuser1001@spce.test
ID=NGCP%invite%///1-1862(a)127.126.0.1 UA='<null>'
2016-07-13T15:15:32.944207+02:00 sp1 proxy[1294]: NOTICE: <script>: LNP routing
number 3481880110 found, replacing called party - R=sip:testuser1001@spce.test
ID=NGCP%invite%///1-1862(a)127.126.0.1 UA='<null>'
```
using debugger.mod_level_mode 1 with tm in debug
```
2016-07-13T15:04:13.327454+02:00 sp1 proxy[9624]: INFO: <script>: Callee block mode
is 'blacklist' - R=sip:testuser1001@spce.test
ID=NGCP%invite%///1-17305(a)127.126.0.1 UA='<null>'
...
2016-07-13T15:04:13.332330+02:00 sp1 proxy[9624]: NOTICE: <script>: Dispatch LNP
request for a/b-number '4311002/4311001' - R=sip:testuser1001@spce.test
ID=NGCP%invite%///1-17305(a)127.126.0.1 UA='<null>'
2016-07-13T15:04:13.332420+02:00 sp1 proxy[9624]: DEBUG: tm [t_lookup.c:1312]:
t_newtran(): DEBUG: t_newtran: msg id=28 , global msg id=28 , T on entrance=(nil)
2016-07-13T15:04:13.332436+02:00 sp1 proxy[9624]: DEBUG: tm [t_lookup.c:466]:
t_lookup_request(): t_lookup_request: start searching: hash=35098, isACK=0
2016-07-13T15:04:13.332440+02:00 sp1 proxy[9624]: DEBUG: tm [t_lookup.c:424]:
matching_3261(): DEBUG: RFC3261 transaction matching failed
2016-07-13T15:04:13.332443+02:00 sp1 proxy[9624]: DEBUG: tm [t_lookup.c:648]:
t_lookup_request(): DEBUG: t_lookup_request: no transaction found
2016-07-13T15:04:13.332451+02:00 sp1 proxy[9624]: DEBUG: tm [t_hooks.c:358]:
run_reqin_callbacks_internal(): DBG: trans=0x7f131db74c78, callback type 1, id 0 entered
2016-07-13T15:04:13.332457+02:00 sp1 proxy[9624]: DEBUG: tm [t_hooks.c:358]:
run_reqin_callbacks_internal(): DBG: trans=0x7f131db74c78, callback type 1, id 0 entered
2016-07-13T15:04:13.332999+02:00 sp1 proxy[9633]: DEBUG: tm [t_lookup.c:1574]:
t_lookup_ident(): DEBUG: t_lookup_ident: transaction found
2016-07-13T15:04:13.333428+02:00 sp1 proxy[9633]: INFO: <script>: *** Result
received: {"result":{"tcap":"62 19 48 00 6c 15 a1 13 02 01 00 02
01 14 30 0b a0 09 04 07 00 00 43 18 88 10 01"}} - R=sip:testuser1001@spce.test
ID=NGCP%invite%///1-17305(a)127.126.0.1 UA='<null>'
```
---
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/kamailio/kamailio/issues/708#issuecomment-232352288
1:43 p.m.
New subject: [kamailio/kamailio] core.debug value changed via fifo/rpc gets lost after t_suspend()/t_continue() (#708)
Where do you call t_continue()? Is it triggered by some particular module? I want to check
if that module initialize properly the cfg framework in the case it creates its own
process.
Otherwise the patch references above should take care of updating cfg framework values
before t_continue() does its job.
---
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/kamailio/kamailio/issues/708#issuecomment-232358852
1:46 p.m.
New subject: [kamailio/kamailio] core.debug value changed via fifo/rpc gets lost after t_suspend()/t_continue() (#708)
Where do you call t_continue()? Is it triggered by
some particular module?
Here I'm ussing janssonrpc-c janssonrpc_request()
---
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/kamailio/kamailio/issues/708#issuecomment-232359585
2:14 p.m.
New subject: [kamailio/kamailio] core.debug value changed via fifo/rpc gets lost after t_suspend()/t_continue() (#708)
If all ok after the last patches you can close and backport as needed.
---
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/kamailio/kamailio/issues/708#issuecomment-232368085
3:30 p.m.
New subject: [kamailio/kamailio] core.debug value changed via fifo/rpc gets lost after t_suspend()/t_continue() (#708)
works! backporting...
Thanks!
---
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/kamailio/kamailio/issues/708#issuecomment-232392697
3:31 p.m.
New subject: [kamailio/kamailio] core.debug value changed via fifo/rpc gets lost after t_suspend()/t_continue() (#708)
Closed #708.
---
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/kamailio/kamailio/issues/708#event-721736179
2925
days inactive
2925
days old
7 comments
2 participants
participants (2)
-
Daniel-Constantin Mierla -
Victor Seva