29 Jan
2013
29 Jan
'13
8:54 p.m.
Hi,
I'm changing carrierroute module so that it could set into another avp the
ID of the rule that was chosen. I have already adjusted all functions but I
have still one problem when kamailio starts.
tmp_id.s=(char *)row->values[COL_ID].val.string_val;
It gives Segfault at this line. The question is, how can I convert the row
value that is int(10) to char (tmp_id is const str *, it is the same as
comment). Thanks,
Mino
29 Jan
29 Jan
9:20 p.m.
char buf[10];
snprintf(buf, sizeof(buf), "%d", (char *)row->values[COL_ID].val.int_val);
?
2013/1/29 Mino Haluz <mino.haluz(a)gmail.com>
Hi,
I'm changing carrierroute module so that it could set into another avp the
ID of the rule that was chosen. I have already adjusted all functions but I
have still one problem when kamailio starts.
tmp_id.s=(char *)row->values[COL_ID].val.string_val;
It gives Segfault at this line. The question is, how can I convert the row
value that is int(10) to char (tmp_id is const str *, it is the same as
comment). Thanks,
Mino
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
9:32 p.m.
Sorry, a small correction :)
tmp_id.len = 10;
tmp_id.s = (char *)pkg_malloc(tmp_id.len * sizeof(char));
snprintf(tmp_id.s, tmp_id.len, "%d", row->values[COL_ID].val.int_val);
2013/1/29 Konstantin M. <evilzluk(a)gmail.com>
char buf[10];
snprintf(buf, sizeof(buf), "%d", (char *)row->values[COL_ID].val.int_val);
?
2013/1/29 Mino Haluz <mino.haluz(a)gmail.com>
Hi,
I'm changing carrierroute module so that it could set into another avp
the ID of the rule that was chosen. I have already adjusted all functions
but I have still one problem when kamailio starts.
tmp_id.s=(char *)row->values[COL_ID].val.string_val;
It gives Segfault at this line. The question is, how can I convert the
row value that is int(10) to char (tmp_id is const str *, it is the same as
comment). Thanks,
Mino
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
9:53 p.m.
On Jan 29, 2013, at 1:54 PM, Mino Haluz <mino.haluz(a)gmail.com> wrote:
Hi,
I'm changing carrierroute module so that it could set into another avp the ID of the
rule that was chosen. I have already adjusted all functions but I have still one problem
when kamailio starts.
tmp_id.s=(char *)row->values[COL_ID].val.string_val;
It gives Segfault at this line. The question is, how can I convert the row value that is
int(10) to char (tmp_id is const str *, it is the same as comment). Thanks,
Use int2str from ut.h:
tmp_id.s = int2str(row->values[COL_ID].val.int_val, &tmp_id.len)
Note that int2str uses an internal static buffer that's overwritten on each call.
andrew
10:05 p.m.
Thanks, that works. Now kamailio starts, but when I add another avp for
cr_route command, it gives me Too many arguments. I'm sure that I added
everything in every file of the module.. Is there any other directory,
where kamailio stores params count for each call? or should it be really in
module directory?
On Tue, Jan 29, 2013 at 8:53 PM, Andrew Mortensen <admorten(a)isc.upenn.edu>wrote;wrote:
On Jan 29, 2013, at 1:54 PM, Mino Haluz <mino.haluz(a)gmail.com> wrote:
Hi,
I'm changing carrierroute module so that it could set into another avp
the ID
of the rule that was chosen. I have already adjusted all functions
but I have still one problem when kamailio starts.
tmp_id.s=(char *)row->values[COL_ID].val.string_val;
It gives Segfault at this line. The question is, how can I convert the
row value
that is int(10) to char (tmp_id is const str *, it is the same as
comment). Thanks,
Use int2str from ut.h:
tmp_id.s = int2str(row->values[COL_ID].val.int_val, &tmp_id.len)
Note that int2str uses an internal static buffer that's overwritten on
each call.
andrew
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
10:45 p.m.
Is there any limit for arguments count ? I have 7.
On Tue, Jan 29, 2013 at 9:05 PM, Mino Haluz <mino.haluz(a)gmail.com> wrote:
Thanks, that works. Now kamailio starts, but when I
add another avp for
cr_route command, it gives me Too many arguments. I'm sure that I added
everything in every file of the module.. Is there any other directory,
where kamailio stores params count for each call? or should it be really in
module directory?
On Tue, Jan 29, 2013 at 8:53 PM, Andrew Mortensen <admorten(a)isc.upenn.edu>wrote;wrote:
On Jan 29, 2013, at 1:54 PM, Mino Haluz <mino.haluz(a)gmail.com> wrote:
Hi,
I'm changing carrierroute module so that it could set into another avp
the ID
of the rule that was chosen. I have already adjusted all functions
but I have still one problem when kamailio starts.
tmp_id.s=(char *)row->values[COL_ID].val.string_val;
It gives Segfault at this line. The question is, how can I convert the
row value
that is int(10) to char (tmp_id is const str *, it is the same as
comment). Thanks,
Use int2str from ut.h:
tmp_id.s = int2str(row->values[COL_ID].val.int_val, &tmp_id.len)
Note that int2str uses an internal static buffer that's overwritten on
each call.
andrew
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
10:50 p.m.
By the way, I have the same question.
2013/1/29 Mino Haluz <mino.haluz(a)gmail.com>
Is there any limit for arguments count ? I have 7.
On Tue, Jan 29, 2013 at 9:05 PM, Mino Haluz <mino.haluz(a)gmail.com> wrote:
Thanks, that works. Now kamailio starts, but when
I add another avp for
cr_route command, it gives me Too many arguments. I'm sure that I added
everything in every file of the module.. Is there any other directory,
where kamailio stores params count for each call? or should it be really in
module directory?
On Tue, Jan 29, 2013 at 8:53 PM, Andrew Mortensen <admorten(a)isc.upenn.edu
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
wrote:
On Jan 29, 2013, at 1:54 PM, Mino Haluz <mino.haluz(a)gmail.com> wrote:
Hi,
I'm changing carrierroute module so that it could set into another avp
the ID
of the rule that was chosen. I have already adjusted all functions
but I have still one problem when kamailio starts.
tmp_id.s=(char *)row->values[COL_ID].val.string_val;
It gives Segfault at this line. The question is, how can I convert the
row value
that is int(10) to char (tmp_id is const str *, it is the same as
comment). Thanks,
Use int2str from ut.h:
tmp_id.s = int2str(row->values[COL_ID].val.int_val, &tmp_id.len)
Note that int2str uses an internal static buffer that's overwritten on
each call.
andrew
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
11:01 p.m.
Because when I set 7 in
{"cr_route", (cmd_function)cr_route, 7,
cr_route_fixup, 0, REQUEST_ROUTE | FAILURE_ROUTE }
It gives me Too many arguments when calling cr_route with 7 arguments, but
when I call it with 6 it gives Unknown command.
When I set param_no to 6, and I call it with exactly 6 arguments, it is ok
..
Maximum arguments count of 7 is only possible reason for this for me :/
On Tue, Jan 29, 2013 at 9:50 PM, Konstantin M. <evilzluk(a)gmail.com> wrote:
By the way, I have the same question.
2013/1/29 Mino Haluz <mino.haluz(a)gmail.com>
Is there any limit for arguments count ? I have
7.
On Tue, Jan 29, 2013 at 9:05 PM, Mino Haluz <mino.haluz(a)gmail.com> wrote:
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
Thanks, that works. Now kamailio starts, but when
I add another avp for
cr_route command, it gives me Too many arguments. I'm sure that I added
everything in every file of the module.. Is there any other directory,
where kamailio stores params count for each call? or should it be really in
module directory?
On Tue, Jan 29, 2013 at 8:53 PM, Andrew Mortensen <
admorten(a)isc.upenn.edu> wrote:
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
On Jan 29, 2013, at 1:54 PM, Mino Haluz <mino.haluz(a)gmail.com> wrote:
> Hi,
>
> I'm changing carrierroute module so that it could set into another
avp the ID of the rule that was chosen. I have already adjusted all
functions but I have still one problem when kamailio starts.
>
> tmp_id.s=(char *)row->values[COL_ID].val.string_val;
>
> It gives Segfault at this line. The question is, how can I convert
the row value that is int(10) to char (tmp_id is const str *, it is the
same as comment). Thanks,
Use int2str from ut.h:
tmp_id.s = int2str(row->values[COL_ID].val.int_val, &tmp_id.len)
Note that int2str uses an internal static buffer that's overwritten on
each call.
andrew
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
4315
days inactive
4315
days old
7 comments
3 participants
participants (3)
-
Andrew Mortensen -
Konstantin M. -
Mino Haluz