On 5/30/13 6:17 PM, Peter Dunkley wrote: > When latest Kamailio git master sends a message over WebSocket > (specifically an MSRP reply on my test system) I get the error, > > One or more reserved bits are on: reserved1 = 1, reserved2 = 0, reserved3 = 0 > > in Google Chrome. This happens for WebSockets over TCP and > WebSockets over TLS. It doesn't happen with a build of Kamailio > git master from around two weeks ago. > > Have there been any changes in the network code over the last > couple of weeks that might have had an effect on what Kamailio > puts out on the wire for TCP and TLS? I don't recall any, but if you give the commit id of the version you are running and it is ok, we can check the rest of the commits till today. Cheers, Daniel > > The code to send an MSRP reply over WebSocket is in > modules/msrp/msrp_netio.c:msrp_reply() > if (unlikely((env->srcinfo.proto == PROTO_WS > || env->srcinfo.proto == PROTO_WSS) > && sr_event_enabled(SREV_TCP_WS_FRAME_OUT))) { > struct tcp_connection *con = tcpconn_get(env->srcinfo.id, 0, 0, > 0, 0); > ws_event_info_t wsev; > > if (con == NULL) > { > LM_WARN("TCP/TLS connection for WebSocket could not be" > "found\n"); > return -1; > } > > memset(&wsev, 0, sizeof(ws_event_info_t)); > wsev.type = SREV_TCP_WS_FRAME_OUT; > wsev.buf = rplbuf; > wsev.len = p - rplbuf; > wsev.id = con->id; > return sr_event_exec(SREV_TCP_WS_FRAME_OUT, (void *) &wsev); > } > > The code that handles the SREV_TCP_WS_FRAME_OUT event is in > modules/websocket/ws_frame.c and basically involves: > > * filling in the WebSocket message header > * identifying the correct TCP/TLS connection > * setting some flags (for example, SND_F_FORCE_CON_REUSE) > * calling tcp_send() > > These areas of the code haven't been changed for months. > > Regards, > > Peter > > > > > _______________________________________________ > sr-dev mailing list > sr-dev(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev -- Daniel-Constantin Mierla -http://www.asipto.com http://twitter.com/#!/miconda -http://www.linkedin.com/in/miconda Kamailio Advanced Training, San Francisco, USA - June 24-27, 2013 *http://asipto.com/u/katu * _______________________________________________ sr-dev mailing list sr-dev(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev

On 5/30/13 6:44 PM, Peter Dunkley wrote: > I don't have a commit ID for it working as the system that is > working was installed from RPMs. However, It was compiled at > 18:39:25 (BST) on May 20 2013. > > It will have been a clean pull from Git at the time it was built. After that date, from core perspective, sctp was moved as a module, syn_branch parameter removed and pv cache used for confg vars, but it doesn't look like should be a direct effect on msrp. A bit before was removal of IPv6 define. Maybe is a side effect with some memory overflow. Can you compile with MEMDBG=1 and see if you get some errors from memory manager? Cheers, Daniel > > Peter > > On 30/05/13 17:36, Daniel-Constantin Mierla wrote: >> >> On 5/30/13 6:17 PM, Peter Dunkley wrote: >>> When latest Kamailio git master sends a message over WebSocket >>> (specifically an MSRP reply on my test system) I get the error, >>> >>> One or more reserved bits are on: reserved1 = 1, reserved2 = 0, reserved3 = 0 >>> >>> in Google Chrome. This happens for WebSockets over TCP and >>> WebSockets over TLS. It doesn't happen with a build of Kamailio >>> git master from around two weeks ago. >>> >>> Have there been any changes in the network code over the last >>> couple of weeks that might have had an effect on what Kamailio >>> puts out on the wire for TCP and TLS? >> I don't recall any, but if you give the commit id of the version >> you are running and it is ok, we can check the rest of the >> commits till today. >> >> Cheers, >> Daniel >>> >>> The code to send an MSRP reply over WebSocket is in >>> modules/msrp/msrp_netio.c:msrp_reply() >>> if (unlikely((env->srcinfo.proto == PROTO_WS >>> || env->srcinfo.proto == PROTO_WSS) >>> && sr_event_enabled(SREV_TCP_WS_FRAME_OUT))) { >>> struct tcp_connection *con = tcpconn_get(env->srcinfo.id, 0, 0, >>> 0, 0); >>> ws_event_info_t wsev; >>> >>> if (con == NULL) >>> { >>> LM_WARN("TCP/TLS connection for WebSocket could not be" >>> "found\n"); >>> return -1; >>> } >>> >>> memset(&wsev, 0, sizeof(ws_event_info_t)); >>> wsev.type = SREV_TCP_WS_FRAME_OUT; >>> wsev.buf = rplbuf; >>> wsev.len = p - rplbuf; >>> wsev.id = con->id; >>> return sr_event_exec(SREV_TCP_WS_FRAME_OUT, (void *) &wsev); >>> } >>> >>> The code that handles the SREV_TCP_WS_FRAME_OUT event is in >>> modules/websocket/ws_frame.c and basically involves: >>> >>> * filling in the WebSocket message header >>> * identifying the correct TCP/TLS connection >>> * setting some flags (for example, SND_F_FORCE_CON_REUSE) >>> * calling tcp_send() >>> >>> These areas of the code haven't been changed for months. >>> >>> Regards, >>> >>> Peter >>> >>> >>> >>> >>> _______________________________________________ >>> sr-dev mailing list >>> sr-dev(a)lists.sip-router.org >>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev >> >> -- >> Daniel-Constantin Mierla -http://www.asipto.com >> http://twitter.com/#!/miconda -http://www.linkedin.com/in/miconda >> Kamailio Advanced Training, San Francisco, USA - June 24-27, 2013 >> *http://asipto.com/u/katu * >> >> >> _______________________________________________ >> sr-dev mailing list >> sr-dev(a)lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev > > > > _______________________________________________ > sr-dev mailing list > sr-dev(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev -- Daniel-Constantin Mierla -http://www.asipto.com http://twitter.com/#!/miconda -http://www.linkedin.com/in/miconda Kamailio Advanced Training, San Francisco, USA - June 24-27, 2013 *http://asipto.com/u/katu * _______________________________________________ sr-dev mailing list sr-dev(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev