Module: sip-router Branch: master Commit: f1449adfb91727112e2a44f406e7de63965595d6 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=f1449adf...
Author: Juha Heinanen jh@tutpro.com Committer: Juha Heinanen jh@tutpro.com Date: Wed Dec 19 12:17:19 2012 +0200
modules/mediaproxy: README fix and edits
- AVPs are available in Kamailio reply routes without setting any tm param.
---
modules/mediaproxy/README | 33 ++++++++++++-------------- modules/mediaproxy/doc/mediaproxy_admin.xml | 22 +++++++---------- 2 files changed, 24 insertions(+), 31 deletions(-)
diff --git a/modules/mediaproxy/README b/modules/mediaproxy/README index 728e66d..122de08 100644 --- a/modules/mediaproxy/README +++ b/modules/mediaproxy/README @@ -10,7 +10,7 @@ Dan Pascu
- Copyright � 2004 Dan Pascu + Copyright © 2004 Dan Pascu __________________________________________________________________
Table of Contents @@ -178,7 +178,7 @@ Chapter 1. Admin Guide mediaproxy is disabled, calls to its functions will have no effect, allowing you to use the same configuration without changes.
- Default value is "0". + Default value is “0”.
Example 1.1. Setting the disable parameter ... @@ -190,7 +190,7 @@ modparam("mediaproxy", "disable", 1) It is the path to the filesystem socket where the mediaproxy dispatcher listens for commands from the module.
- Default value is "/var/run/mediaproxy/dispatcher.sock". + Default value is “/var/run/mediaproxy/dispatcher.sock”.
Example 1.2. Setting the mediaproxy_socket parameter ... @@ -203,7 +203,7 @@ modparam("mediaproxy", "mediaproxy_socket", "/var/run/mediaproxy/dispatcher.sock How much time (in milliseconds) to wait for an answer from the mediaproxy dispatcher.
- Default value is "500". + Default value is “500”.
Example 1.3. Setting the mediaproxy_timeout parameter ... @@ -225,11 +225,11 @@ modparam("mediaproxy", "mediaproxy_timeout", 500) to get the correct NAT IP address from where the SIP signaling originated.
- Default value is "$avp(s:signaling_ip)". + Default value is “$avp(signaling_ip)”.
Example 1.4. Setting the signaling_ip_avp parameter ... -modparam("mediaproxy", "signaling_ip_avp", "$avp(s:nat_ip)") +modparam("mediaproxy", "signaling_ip_avp", "$avp(nat_ip)") ...
5.5. media_relay_avp (string) @@ -240,11 +240,11 @@ modparam("mediaproxy", "signaling_ip_avp", "$avp(s:nat_ip)") before calling use_media_proxy(), it will be preferred by the dispatcher over the normal selection algorithm.
- Default value is "$avp(s:media_relay)". + Default value is “$avp(media_relay)”.
Example 1.5. Setting the media_relay_avp parameter ... -modparam("mediaproxy", "media_relay_avp", "$avp(s:media_relay)") +modparam("mediaproxy", "media_relay_avp", "$avp(media_relay)") ...
5.6. ice_candidate (string) @@ -255,7 +255,7 @@ modparam("mediaproxy", "media_relay_avp", "$avp(s:media_relay)") selected then a low priority candidate will be added and if 'high-priority' is selected a high priority one.
- Default value is "none". + Default value is “none”.
Example 1.6. Setting the ice_candidate parameter ... @@ -266,17 +266,14 @@ modparam("mediaproxy", "ice_candidate", "low-priority")
Specification of the AVP which holds the ICE candidate that will be inserted in the SDP. The value specified in this AVP will override the - value in ice_candidate module parameter. Note that if use_media_proxy() - and end_media_session() functions are being used, the AVP will not be - available in the reply route unless you set onreply_avp_mode from the - tm module to '1', and if the AVP is not set, the default value will be - used. + value in ice_candidate module parameter. If the AVP is not set, the + default value will be used.
- Default value is "$avp(s:ice_candidate)". + Default value is “$avp(ice_candidate)”.
Example 1.7. Setting the ice_candidate_avp parameter ... -modparam("mediaproxy", "ice_candidate_avp", "$avp(s:ice_candidate)") +modparam("mediaproxy", "ice_candidate_avp", "$avp(ice_candidate)") ...
6. Functions @@ -315,7 +312,7 @@ modparam("mediaproxy", "ice_candidate_avp", "$avp(s:ice_candidate)") ... if (method==INVITE && !has_totag()) { # We can also use a specific media relay if we need to - #$avp(s:media_relay) = "1.2.3.4"; + #$avp(media_relay) = "1.2.3.4"; engage_media_proxy(); } ... @@ -344,7 +341,7 @@ if (method==INVITE && !has_totag()) { ... if (method==INVITE) { # We can also use a specific media relay if we need to - #$avp(s:media_relay) = "1.2.3.4"; + #$avp(media_relay) = "1.2.3.4"; use_media_proxy(); } ... diff --git a/modules/mediaproxy/doc/mediaproxy_admin.xml b/modules/mediaproxy/doc/mediaproxy_admin.xml index 09c9bbf..25f84e8 100644 --- a/modules/mediaproxy/doc/mediaproxy_admin.xml +++ b/modules/mediaproxy/doc/mediaproxy_admin.xml @@ -241,7 +241,7 @@ modparam("mediaproxy", "mediaproxy_timeout", 500)
<para> <emphasis> - Default value is <quote>$avp(s:signaling_ip)</quote>. + Default value is <quote>$avp(signaling_ip)</quote>. </emphasis> </para>
@@ -249,7 +249,7 @@ modparam("mediaproxy", "mediaproxy_timeout", 500) <title>Setting the <varname>signaling_ip_avp</varname> parameter</title> <programlisting format="linespecific"> ... -modparam("mediaproxy", "signaling_ip_avp", "$avp(s:nat_ip)") +modparam("mediaproxy", "signaling_ip_avp", "$avp(nat_ip)") ... </programlisting> </example> @@ -268,7 +268,7 @@ modparam("mediaproxy", "signaling_ip_avp", "$avp(s:nat_ip)")
<para> <emphasis> - Default value is <quote>$avp(s:media_relay)</quote>. + Default value is <quote>$avp(media_relay)</quote>. </emphasis> </para>
@@ -276,7 +276,7 @@ modparam("mediaproxy", "signaling_ip_avp", "$avp(s:nat_ip)") <title>Setting the <varname>media_relay_avp</varname> parameter</title> <programlisting format="linespecific"> ... -modparam("mediaproxy", "media_relay_avp", "$avp(s:media_relay)") +modparam("mediaproxy", "media_relay_avp", "$avp(media_relay)") ... </programlisting> </example> @@ -313,17 +313,13 @@ modparam("mediaproxy", "ice_candidate", "low-priority") <para> Specification of the AVP which holds the ICE candidate that will be inserted in the SDP. The value specified in this AVP will override - the value in ice_candidate module parameter. - - Note that if use_media_proxy() and end_media_session() functions are - being used, the AVP will not be available in the reply route unless - you set onreply_avp_mode from the tm module to '1', and if the AVP + the value in ice_candidate module parameter. If the AVP is not set, the default value will be used. </para>
<para> <emphasis> - Default value is <quote>$avp(s:ice_candidate)</quote>. + Default value is <quote>$avp(ice_candidate)</quote>. </emphasis> </para>
@@ -331,7 +327,7 @@ modparam("mediaproxy", "ice_candidate", "low-priority") <title>Setting the <varname>ice_candidate_avp</varname> parameter</title> <programlisting format="linespecific"> ... -modparam("mediaproxy", "ice_candidate_avp", "$avp(s:ice_candidate)") +modparam("mediaproxy", "ice_candidate_avp", "$avp(ice_candidate)") ... </programlisting> </example> @@ -381,7 +377,7 @@ modparam("mediaproxy", "ice_candidate_avp", "$avp(s:ice_candidate)") ... if (method==INVITE && !has_totag()) { # We can also use a specific media relay if we need to - #$avp(s:media_relay) = "1.2.3.4"; + #$avp(media_relay) = "1.2.3.4"; engage_media_proxy(); } ... @@ -430,7 +426,7 @@ if (method==INVITE && !has_totag()) { ... if (method==INVITE) { # We can also use a specific media relay if we need to - #$avp(s:media_relay) = "1.2.3.4"; + #$avp(media_relay) = "1.2.3.4"; use_media_proxy(); } ...
-
Juha Heinanen