are selects documented somewhere?

List overview All Threads
Download

newer

older

[tracker] Assignee added: TLS...

new PV class: $sel(name)

Daniel-Constantin Mierla

20 Aug 2009 20 Aug '09

4:23 p.m.

Hello, is there a list with available selects in ser? I only found short introduction at: http://www.iptel.org/introduction_to_selects_and_attribute_value_pairs_avpa… Thanks, Daniel -- Daniel-Constantin Mierla * http://www.asipto.com/

Show replies by date

Klaus Darilion

20 Aug 20 Aug

4:30 p.m.

Recently posted by Miklos: -------- Original-Nachricht -------- Betreff: Re: [SR-Users] sip-router select Datum: Wed, 12 Aug 2009 10:13:11 +0200 Von: Miklos Tirpak <miklos(a)iptel.org> An: MÉSZÁROS Mihály <misi(a)niif.hu> CC: sr-users(a)lists.sip-router.org Referenzen: <4A817281.4040301(a)niif.hu> Hi, selects come from SER, I found these pages about them: http://www.iptel.org/introduction_to_selects_and_attribute_value_pairs_avpa… http://www.iptel.org/attribute_value_pairs_and_selects For the list of available selects you can use http://www.iptel.org/ser/doc/search (Uncheck F, R, and P) It shows a bit older state though. Miklos On 08/11/2009 03:30 PM, MÉSZÁROS Mihály wrote:

...

Hi! Can any of you explain how select framework is working? Where can i find any documentation about it. I am experiencing problem when i am try using it. Any help highly appreciated! Regards, Misi

Daniel-Constantin Mierla schrieb:

...

Hello, is there a list with available selects in ser? I only found short introduction at: http://www.iptel.org/introduction_to_selects_and_attribute_value_pairs_avpa… Thanks, Daniel

Daniel-Constantin Mierla

4:32 p.m.

On 20.08.2009 16:30 Uhr, Klaus Darilion wrote:

...

Recently posted by Miklos:

ahh, thanks, I did miss this mail... Cheers, Daniel

...

-------- Original-Nachricht -------- Betreff: Re: [SR-Users] sip-router select Datum: Wed, 12 Aug 2009 10:13:11 +0200 Von: Miklos Tirpak <miklos(a)iptel.org> An: MÉSZÁROS Mihály <misi(a)niif.hu> CC: sr-users(a)lists.sip-router.org Referenzen: <4A817281.4040301(a)niif.hu> Hi, selects come from SER, I found these pages about them: http://www.iptel.org/introduction_to_selects_and_attribute_value_pairs_avpa… http://www.iptel.org/attribute_value_pairs_and_selects For the list of available selects you can use http://www.iptel.org/ser/doc/search (Uncheck F, R, and P) It shows a bit older state though. Miklos On 08/11/2009 03:30 PM, MÉSZÁROS Mihály wrote:

Hi! Can any of you explain how select framework is working? Where can i find any documentation about it. I am experiencing problem when i am try using it. Any help highly appreciated! Regards, Misi

Daniel-Constantin Mierla schrieb: > Hello, > > is there a list with available selects in ser? I only found short > introduction at: > > http://www.iptel.org/introduction_to_selects_and_attribute_value_pairs_avpa… > > > Thanks, > Daniel >

-- Daniel-Constantin Mierla * http://www.asipto.com/

Jan Janak

4:47 p.m.

Up-to-date list of implemented selects does not exist, but we once wrote a tool that can generate such list from compiled SER modules (by traversing the data structures in modules). The tool most likely won't work anymore with sip-router code, but we can try to update it if people think would be a good idea and a good think to have. The tool was called ser_objdump and its git import is here: http://git.sip-router.org/cgi-bin/gitweb.cgi?p=ser;a=tree;h=refs/heads/mast… In addition to selects it also produced lists if implemented module functions, module parameters, and rcp commands. The output of that tool is what is being searched by the search tool recommended by Miklos and available on iptel.org site. Jan. On Thu, Aug 20, 2009 at 3:32 PM, Daniel-Constantin Mierla<miconda(a)gmail.com> wrote:

...

On 20.08.2009 16:30 Uhr, Klaus Darilion wrote:

Recently posted by Miklos:

ahh, thanks, I did miss this mail... Cheers, Daniel

Hi! Can any of you explain how select framework is working? Where can i find any documentation about it. I am experiencing problem when i am try using it. Any help highly appreciated! Regards, Misi

Daniel-Constantin Mierla schrieb: > > Hello, > > is there a list with available selects in ser? I only found short > introduction at: > > > http://www.iptel.org/introduction_to_selects_and_attribute_value_pairs_avpa… > > Thanks, > Daniel >

-- Daniel-Constantin Mierla * http://www.asipto.com/ _______________________________________________ sr-dev mailing list sr-dev(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev

Daniel-Constantin Mierla

4:49 p.m.

On 20.08.2009 16:30 Uhr, Klaus Darilion wrote:

...

Recently posted by Miklos:

I started a dedicated wiki page in cookbook format: http://sip-router.org/wiki/cookbooks/selects/devel Anyone having time to dig and contribute, is very welcome. Thanks, Daniel

...

Hi! Can any of you explain how select framework is working? Where can i find any documentation about it. I am experiencing problem when i am try using it. Any help highly appreciated! Regards, Misi

Daniel-Constantin Mierla schrieb:

Hello, is there a list with available selects in ser? I only found short introduction at: http://www.iptel.org/introduction_to_selects_and_attribute_value_pairs_avpa… Thanks, Daniel

_______________________________________________ sr-dev mailing list sr-dev(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev

-- Daniel-Constantin Mierla * http://www.asipto.com/

Jan Janak

5:06 p.m.

On Thu, Aug 20, 2009 at 3:49 PM, Daniel-Constantin Mierla<miconda(a)gmail.com> wrote:

...

On 20.08.2009 16:30 Uhr, Klaus Darilion wrote:

Recently posted by Miklos:

I started a dedicated wiki page in cookbook format: http://sip-router.org/wiki/cookbooks/selects/devel Anyone having time to dig and contribute, is very welcome.

I found a list I generated a while ago. It is not completely up-to-date but it won't be far from it. The list in CSV format is attached in case you wanted to import it in the wiki page. The meaning of comma separated fields is as follows * module name * ser version * function/parameter/select name * Symbol type (0-function, 1-rpc, 2-param, 3-select * Number of parameters (functions) * Flags (failure route, onsend route, ...) * Documentation string (rpc functions) Jan.

Daniel-Constantin Mierla

6:26 p.m.

Thanks Jan, the tool sounds interesting, however, the file you attached does not include the selects ... or I overlooked something. Cheers, Daniel On 20.08.2009 17:06 Uhr, Jan Janak wrote:

...

On Thu, Aug 20, 2009 at 3:49 PM, Daniel-Constantin Mierla<miconda(a)gmail.com> wrote:

On 20.08.2009 16:30 Uhr, Klaus Darilion wrote:

Recently posted by Miklos:

I started a dedicated wiki page in cookbook format: http://sip-router.org/wiki/cookbooks/selects/devel Anyone having time to dig and contribute, is very welcome.

-- Daniel-Constantin Mierla * http://www.asipto.com/

Jan Janak

6:35 p.m.

On Thu, Aug 20, 2009 at 5:26 PM, Daniel-Constantin Mierla<miconda(a)gmail.com> wrote:

...

Thanks Jan, the tool sounds interesting, however, the file you attached does not include the selects ... or I overlooked something.

You are right, I overlooked this. I must have another file with just selects then because I remember generating it, I'll have a look tomorrow and get back to you. Jan.

Jan Janak

24 Aug 24 Aug

11:56 a.m.

Attached is the select list. Jan. On Thu, Aug 20, 2009 at 5:35 PM, Jan Janak<jan(a)ryngle.com> wrote:

...

On Thu, Aug 20, 2009 at 5:26 PM, Daniel-Constantin Mierla<miconda(a)gmail.com> wrote:

Thanks Jan, the tool sounds interesting, however, the file you attached does not include the selects ... or I overlooked something.

You are right, I overlooked this. I must have another file with just selects then because I remember generating it, I'll have a look tomorrow and get back to you. Jan.

Daniel-Constantin Mierla

1:24 p.m.

Thanks, I used awk to generate listing in dokuwiki: http://sip-router.org/wiki/cookbooks/selects/devel#raw_list Cheers, Daniel On 24.08.2009 11:56 Uhr, Jan Janak wrote:

...

Attached is the select list. Jan. On Thu, Aug 20, 2009 at 5:35 PM, Jan Janak<jan(a)ryngle.com> wrote: > On Thu, Aug 20, 2009 at 5:26 PM, Daniel-Constantin > Mierla<miconda(a)gmail.com> wrote: > >> Thanks Jan, the tool sounds interesting, however, the file you attached does >> not include the selects ... or I overlooked something. >> > You are right, I overlooked this. I must have another file with just > selects then because I remember generating it, I'll have a look > tomorrow and get back to you. > > Jan. > >

-- Daniel-Constantin Mierla * http://www.asipto.com/

Martin Hoffmann

1:37 p.m.

Daniel-Constantin Mierla wrote:

...

Thanks, I used awk to generate listing in dokuwiki: http://sip-router.org/wiki/cookbooks/selects/devel#raw_list

How do we procede from there? Should we keep the page in some format that allows magically adding new selects from ser_objdump output or do we just take it as a starter and happily modify away? Regards, Martin, who consideres spending some time on it

Daniel-Constantin Mierla

1:46 p.m.

Hi Martin, On 24.08.2009 13:37 Uhr, Martin Hoffmann wrote:

...

Daniel-Constantin Mierla wrote:

Thanks, I used awk to generate listing in dokuwiki: http://sip-router.org/wiki/cookbooks/selects/devel#raw_list

How do we procede from there? Should we keep the page in some format that allows magically adding new selects from ser_objdump output or do we just take it as a starter and happily modify away?

imo, would be good to have a read-only section where we can easily update from ser_objdump (or maybe a new dokuwiki page). It is why I wrote that adding details, examples, comments, a.s.o, should create a new entry in the section above: Selects Classes. Or, if developers commit to update the page once they add new selects, we can work directly on the list, merging the two sections. It is what we do in Kamailio side of PV/transformations - but there was no objdump tool for auto-generation, though. Cheers, Daniel -- Daniel-Constantin Mierla * http://www.asipto.com/

Martin Hoffmann

2:01 p.m.

Daniel-Constantin Mierla wrote:

...

Or, if developers commit to update the page once they add new selects, we can work directly on the list, merging the two sections. It is what we do in Kamailio side of PV/transformations - but there was no objdump tool for auto-generation, though.

I think that would be nicer. How about this: I sit down and write a little script that takes the output from ser_objdump and either merges it accordingly or warns about missing selects. Regards, Martin

Daniel-Constantin Mierla

2:14 p.m.

On 24.08.2009 14:01 Uhr, Martin Hoffmann wrote:

...

Daniel-Constantin Mierla wrote:

I think that would be nicer. How about this: I sit down and write a little script that takes the output from ser_objdump and either merges it accordingly or warns about missing selects.

much better. Thanks, Daniel -- Daniel-Constantin Mierla * http://www.asipto.com/

Klaus Darilion

20 Aug 20 Aug

5:11 p.m.

Daniel-Constantin Mierla schrieb:

...

On 20.08.2009 16:30 Uhr, Klaus Darilion wrote:

Recently posted by Miklos:

I started a dedicated wiki page in cookbook format: http://sip-router.org/wiki/cookbooks/selects/devel Anyone having time to dig and contribute, is very welcome.

IMO it should be generated automatically by the tool Jan mentioned. klaus

...

Thanks, Daniel

Hi! Can any of you explain how select framework is working? Where can i find any documentation about it. I am experiencing problem when i am try using it. Any help highly appreciated! Regards, Misi

Daniel-Constantin Mierla schrieb:

Hello, is there a list with available selects in ser? I only found short introduction at: http://www.iptel.org/introduction_to_selects_and_attribute_value_pairs_avpa… Thanks, Daniel

_______________________________________________ sr-dev mailing list sr-dev(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev

Daniel-Constantin Mierla

6:24 p.m.

On 20.08.2009 17:11 Uhr, Klaus Darilion wrote:

...

Daniel-Constantin Mierla schrieb:

On 20.08.2009 16:30 Uhr, Klaus Darilion wrote:

Recently posted by Miklos:

I started a dedicated wiki page in cookbook format: http://sip-router.org/wiki/cookbooks/selects/devel Anyone having time to dig and contribute, is very welcome.

IMO it should be generated automatically by the tool Jan mentioned.

fine with me, I didn't know about it, feel free to do it. However, some description/examples should be added as well. Cheers, Daniel

...

klaus > > Thanks, > Daniel > >> >> -------- Original-Nachricht -------- >> Betreff: Re: [SR-Users] sip-router select >> Datum: Wed, 12 Aug 2009 10:13:11 +0200 >> Von: Miklos Tirpak <miklos(a)iptel.org> >> An: MÉSZÁROS Mihály <misi(a)niif.hu> >> CC: sr-users(a)lists.sip-router.org >> Referenzen: <4A817281.4040301(a)niif.hu> >> >> Hi, >> >> selects come from SER, I found these pages about them: >> http://www.iptel.org/introduction_to_selects_and_attribute_value_pairs_avpa… >> >> http://www.iptel.org/attribute_value_pairs_and_selects >> >> For the list of available selects you can use >> http://www.iptel.org/ser/doc/search >> (Uncheck F, R, and P) >> It shows a bit older state though. >> >> Miklos >> >> On 08/11/2009 03:30 PM, MÉSZÁROS Mihály wrote: >> > Hi! >> > >> > Can any of you explain how select framework is working? >> > Where can i find any documentation about it. >> > I am experiencing problem when i am try using it. >> > Any help highly appreciated! >> > >> > Regards, >> > Misi >> > >> >> Daniel-Constantin Mierla schrieb: >>> Hello, >>> >>> is there a list with available selects in ser? I only found short >>> introduction at: >>> >>> http://www.iptel.org/introduction_to_selects_and_attribute_value_pairs_avpa… >>> >>> >>> Thanks, >>> Daniel >>> >> >> _______________________________________________ >> sr-dev mailing list >> sr-dev(a)lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev >> >

-- Daniel-Constantin Mierla * http://www.asipto.com/

Klaus Darilion

7:01 p.m.

Daniel-Constantin Mierla schrieb:

...

On 20.08.2009 17:11 Uhr, Klaus Darilion wrote:

Daniel-Constantin Mierla schrieb:

On 20.08.2009 16:30 Uhr, Klaus Darilion wrote:

Recently posted by Miklos:

I started a dedicated wiki page in cookbook format: http://sip-router.org/wiki/cookbooks/selects/devel Anyone having time to dig and contribute, is very welcome.

IMO it should be generated automatically by the tool Jan mentioned.

fine with me, I didn't know about it, feel free to do it. However, some description/examples should be added as well.

maybe two lists? - all selects (autogenerated, undocumented) - documented selects I think some selects will be self-explanatory if the basic selects are described klaus

5571

days inactive

5575

days old

sr-dev@lists.kamailio.org

Manage subscription

16 comments

4 participants

tags (0)

participants (4)

Daniel-Constantin Mierla
Jan Janak
Klaus Darilion
Martin Hoffmann