sr-users-es January 2008

sr-users-es@lists.kamailio.org

20 participants
56 discussions

Re: [OpenSER-Users-ES] Problemas Forward de llamadas de openser a Asterisk
by andresdb＠adinet.com.uy 15 Jan '08

15 Jan '08

Adjunto output de ngrep. Saludos, >----Mensaje original---- >De: ibc(a)in.ilimit.es >Fecha: 15/01/2008 13:23 >Para: <users-es(a)lists.openser.org> >Asunto: Re: [OpenSER-Users-ES] Problemas Forward de llamadas de openser a Asterisk > >On Tuesday 15 January 2008 16:49:58 andresdb(a)adinet.com.uy wrote: >> Estimado, >> >> Correcto, desde un teléfono con ip publica me registro al ser que esta >> en una ip publica, el servidor ser tiene dos tarjetas de red una para >> la ip publica y otra para la lan que es donde este el asterisk, no >> puedo llamar desde ese teléfono al asterisk no escucho el ringing, si >> me registro a la ip privada del ser(LAN) puedo llamar al asterisk, se >> escuha el ringing y puedo establecer una comunicación. > > >- Limpia el escenario (apaga teléfonos, etc). > >- Instala "ngrep" en el OpenSer y ejecuta: > ~# ngrep -d any -P ' ' -W byline -T -t "" port 5060 or port 5065 >(puedes volcarlo a un archivo tal vez) > >- Enciende el teléfono con IP pública (o sea, que se registre). > >- Haz la llamada que falla. > >- Y pega la salida del comando anterior con todo lo que ha capturado. > > > >-- >Iñaki Baz Castillo >ibc(a)in.ilimit.es > >_______________________________________________ >Users-es mailing list >Users-es(a)lists.openser.org >http://lists.openser.org/cgi-bin/mailman/listinfo/users-es >

4 3

Re: [OpenSER-Users-ES] Problemas Forward de llamadas de openser a Asterisk
by andresdb＠adinet.com.uy 15 Jan '08

15 Jan '08

Va la captura, Jan 15 14:29:24 [32215] DBG:core:parse_headers: flags=ffffffffffffffff Jan 15 14:29:24 [32215] DBG:tm:t_newtran: transaction on entrance=0xffffffff Jan 15 14:29:24 [32215] DBG:core:parse_headers: flags=ffffffffffffffff Jan 15 14:29:24 [32215] DBG:core:parse_headers: flags=78 Jan 15 14:29:24 [32215] DBG:tm:t_lookup_request: start searching: hash=45439, isACK=0 Jan 15 14:29:24 [32215] DBG:tm:matching_3261: RFC3261 transaction matching failed Jan 15 14:29:24 [32215] DBG:tm:t_lookup_request: no transaction found Jan 15 14:29:24 [32215] DBG:core:mk_proxy: doing DNS lookup... Jan 15 14:29:24 [32215] DBG:core:check_via_address: params 190.132.174. xxx, 190.132.174.xxx, 0 Jan 15 14:29:24 [32215] DBG:tm:set_timer: relative timeout is 500000 Jan 15 14:29:24 [32215] DBG:tm:insert_timer_unsafe: [4]: 0xb614313c (98200000) Jan 15 14:29:24 [32215] DBG:tm:set_timer: relative timeout is 30 Jan 15 14:29:24 [32215] DBG:tm:insert_timer_unsafe: [0]: 0xb6143158 (127) Jan 15 14:29:24 [32215] DBG:tm:t_relay_to: new transaction fwd'ed Jan 15 14:29:24 [32215] DBG:tm:t_unref: UNREF_UNSAFE: after is 0 Jan 15 14:29:24 [32215] DBG:core:destroy_avp_list: destroying list (nil) Jan 15 14:29:24 [32215] DBG:core:receive_msg: cleaning up Jan 15 14:29:24 [32218] DBG:core:parse_msg: SIP Reply (status): Jan 15 14:29:24 [32218] DBG:core:parse_msg: version: <SIP/2.0> Jan 15 14:29:24 [32218] DBG:core:parse_msg: status: <489> Jan 15 14:29:24 [32218] DBG:core:parse_msg: reason: <Event Package Not Supported> Jan 15 14:29:24 [32218] DBG:core:parse_headers: flags=2 Jan 15 14:29:24 [32218] DBG:core:parse_via_param: found param type 232, <branch> = <z9hG4bKf71b.f1369954.0>; state=16 Jan 15 14:29:24 [32218] DBG:core:parse_via: end of header reached, state=5 Jan 15 14:29:24 [32218] DBG:core:parse_headers: via found, flags=2 Jan 15 14:29:24 [32218] DBG:core:parse_headers: this is the first via Jan 15 14:29:24 [32218] DBG:core:receive_msg: After parse_msg... Jan 15 14:29:24 [32218] DBG:core:forward_reply: found module tm, passing reply to it Jan 15 14:29:24 [32218] DBG:tm:t_check: start=0xffffffff Jan 15 14:29:24 [32218] DBG:core:parse_headers: flags=22 Jan 15 14:29:24 [32218] DBG:core:parse_via_param: found param type 232, <branch> = <z9hG4bK-d87543-8d7344018518fb1b-1--d87543->; state=6 Jan 15 14:29:24 [32218] DBG:core:parse_via_param: found param type 235, <rport> = <64438>; state=16 Jan 15 14:29:24 [32218] DBG:core:parse_via: end of header reached, state=5 Jan 15 14:29:24 [32218] DBG:core:parse_headers: via found, flags=22 Jan 15 14:29:24 [32218] DBG:core:parse_headers: parse_headers: this is the second via Jan 15 14:29:24 [32218] DBG:core:parse_to_param: tag=d81f7914 Jan 15 14:29:24 [32218] DBG:core:parse_to: end of header reached, state=29 Jan 15 14:29:24 [32218] DBG:core:parse_to: display={"pruebas ser desde adsl"}, ruri={sip:100%40netgate.com@200.40.xxx.xxx} Jan 15 14:29:24 [32218] DBG:core:get_hdr_field: <To> [77]; uri=[sip: 100%40netgate.com(a)200.40.xxx.xxx] Jan 15 14:29:24 [32218] DBG:core:get_hdr_field: to body ["pruebas ser desde adsl"<sip:100%40netgate.com@200.40.xxx.xxx>] Jan 15 14:29:24 [32218] DBG:core:get_hdr_field: cseq <CSeq>: <1> <SUBSCRIBE> Jan 15 14:29:24 [32218] DBG:tm:t_reply_matching: hash 45439 label 1167680287 branch 0 Jan 15 14:29:24 [32218] DBG:tm:t_reply_matching: REF_UNSAFE: after is 1 Jan 15 14:29:24 [32218] DBG:tm:t_reply_matching: reply matched (T=0xb6142ff0)! Jan 15 14:29:24 [32218] DBG:tm:t_check: end=0xb6142ff0 Jan 15 14:29:24 [32218] DBG:tm:reply_received: org. status uas=0, uac [0]=0 local=0 is_invite=0) Jan 15 14:29:24 [32218] DBG:tm:t_should_relay_response: T_code=0, new_code=489 Jan 15 14:29:24 [32218] DBG:tm:t_pick_branch: picked branch 0, code 489 Jan 15 14:29:24 [32218] DBG:tm:is_3263_failure: dns-failover test: branch=0, last_recv=489, flags=2 Jan 15 14:29:24 [32218] DBG:tm:relay_reply: branch=0, save=0, relay=0 Jan 15 14:29:24 [32218] DBG:core:build_res_buf_from_sip_res: old size: 527, new size: 464 Jan 15 14:29:24 [32218] DBG:core:build_res_buf_from_sip_res: copied size: orig:104, new: 41, rest: 423 msg= SIP/2.0 489 Event Package Not Supported Via: SIP/2.0/UDP 190.132.174.235:64438;branch=z9hG4bK-d87543- 8d7344018518fb1b-1--d87543-;rport=64438 To: "pruebas ser desde adsl"<sip:100%40netgate.com@200.40.xxx.xxx>; tag=d81f7914 From: "pruebas ser desde adsl"<sip:100%40netgate.com@200.40.xxx.xxx>; tag=3363de79 Call-ID: ac388b1869603b1bNDdmMWE3Mjk4MTgxZGY3N2I1ODJhNTQwZTE2OWJkMTU. CSeq: 1 SUBSCRIBE User-Agent: X-Lite release 1003l stamp 30942 Content-Length: 0 Jan 15 14:29:24 [32218] DBG:core:_shm_resize: resize(0) called Jan 15 14:29:24 [32218] DBG:tm:insert_timer_unsafe: [2]: 0xb6143038 (102) Jan 15 14:29:24 [32218] DBG:tm:relay_reply: sent buf=0x8185340: SIP/2. 0 4..., shmem=0xb6144f18: SIP/2.0 4 Jan 15 14:29:24 [32218] DBG:tm:cleanup_uac_timers: RETR/FR timers reset Jan 15 14:29:24 [32218] DBG:tm:t_unref: UNREF_UNSAFE: after is 0 Jan 15 14:29:24 [32218] DBG:core:destroy_avp_list: destroying list (nil) Jan 15 14:29:24 [32218] DBG:core:receive_msg: cleaning up Jan 15 14:29:25 [32219] DBG:tm:utimer_routine: timer routine:4, tl=0xb614313c next=(nil), timeout=98200000 Jan 15 14:29:28 [32219] DBG:tm:timer_routine: timer routine:2, tl=0xb6143038 next=(nil), timeout=102 Jan 15 14:29:28 [32219] DBG:tm:wait_handler: removing 0xb6142ff0 from table Jan 15 14:29:28 [32219] DBG:tm:delete_cell: delete transaction 0xb6142ff0 Jan 15 14:29:28 [32219] DBG:tm:wait_handler: done Jan 15 14:29:41 [32216] DBG:core:parse_msg: SIP Request: Jan 15 14:29:41 [32216] DBG:core:parse_msg: method: <INVITE> Jan 15 14:29:41 [32216] DBG:core:parse_msg: uri: <sip:751@200.40. xxx.xxx> Jan 15 14:29:41 [32216] DBG:core:parse_msg: version: <SIP/2.0> Jan 15 14:29:41 [32216] DBG:core:parse_headers: flags=2 Jan 15 14:29:41 [32216] DBG:core:parse_via_param: found param type 232, <branch> = <z9hG4bK-d87543-40390549c060936b-1--d87543->; state=6 Jan 15 14:29:41 [32216] DBG:core:parse_via_param: found param type 235, <rport> = <n/a>; state=17 Jan 15 14:29:41 [32216] DBG:core:parse_via: end of header reached, state=5 Jan 15 14:29:41 [32216] DBG:core:parse_headers: via found, flags=2 Jan 15 14:29:41 [32216] DBG:core:parse_headers: this is the first via Jan 15 14:29:41 [32216] DBG:core:receive_msg: After parse_msg... Jan 15 14:29:41 [32216] DBG:core:receive_msg: preparing to run routing scripts... Jan 15 14:29:41 [32216] DBG:core:parse_headers: flags=100 Jan 15 14:29:41 [32216] DBG:maxfwd:is_maxfwd_present: value = 70 Jan 15 14:29:41 [32216] DBG:core:parse_headers: flags=10 Jan 15 14:29:41 [32216] DBG:core:parse_to: end of header reached, state=10 Jan 15 14:29:41 [32216] DBG:core:parse_to: display={"751"}, ruri={sip: 751(a)200.40.xxx.xxx} Jan 15 14:29:41 [32216] DBG:core:get_hdr_field: <To> [31]; uri=[sip: 751(a)200.40.xxx.xxx] Jan 15 14:29:41 [32216] DBG:core:get_hdr_field: to body ["751"<sip: 751(a)200.40.xxx.xxx> ] Jan 15 14:29:41 [32216] DBG:core:parse_to_param: tag=747fa53e Jan 15 14:29:41 [32216] DBG:core:parse_to: end of header reached, state=29 Jan 15 14:29:41 [32216] DBG:core:parse_to: display={"pruebas ser desde adsl"}, ruri={sip:100%40netgate.com@200.40.xxx.xxx} Jan 15 14:29:41 [32216] DBG:core:parse_headers: flags=200 Jan 15 14:29:41 [32216] DBG:core:get_hdr_field: cseq <CSeq>: <1> <INVITE> Jan 15 14:29:41 [32216] DBG:core:get_hdr_field: content_length=438 Jan 15 14:29:41 [32216] DBG:core:get_hdr_field: found end of header Jan 15 14:29:41 [32216] DBG:rr:find_first_route: No Route headers found Jan 15 14:29:41 [32216] DBG:rr:loose_route: There is no Route HF Jan 15 14:29:41 [32216] DBG:core:grep_sock_info: checking if host==us: 14==13 && [200.40.xxx.xxx] == [192.168.1.200] Jan 15 14:29:41 [32216] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 15 14:29:41 [32216] DBG:core:grep_sock_info: checking if host==us: 14==14 && [200.40.xxx.xxx] == [200.40.xxx.xxx] Jan 15 14:29:41 [32216] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 15 14:29:41 [32216] DBG:tm:t_newtran: transaction on entrance=0xffffffff Jan 15 14:29:41 [32216] DBG:core:parse_headers: flags=ffffffffffffffff Jan 15 14:29:41 [32216] DBG:core:parse_headers: flags=78 Jan 15 14:29:41 [32216] DBG:tm:t_lookup_request: start searching: hash=13046, isACK=0 Jan 15 14:29:41 [32216] DBG:tm:matching_3261: RFC3261 transaction matching failed Jan 15 14:29:41 [32216] DBG:tm:t_lookup_request: no transaction found Jan 15 14:29:41 [32216] DBG:core:parse_headers: flags=ffffffffffffffff Jan 15 14:29:41 [32216] DBG:core:check_via_address: params 190.132.174. xxx, 190.132.174.xxx, 0 Jan 15 14:29:41 [32216] DBG:core:_shm_resize: resize(0) called Jan 15 14:29:41 [32216] DBG:tm:_reply_light: reply sent out. buf=0x8185858: SIP/2.0 1..., shmem=0xb6144bc8: SIP/2.0 1 Jan 15 14:29:41 [32216] DBG:tm:_reply_light: finished Jan 15 14:29:41 [32216] DBG:core:mk_proxy: doing DNS lookup... Jan 15 14:29:41 [32216] DBG:core:check_via_address: params 190.132.174. xxx, 190.132.174.xxx, 0 Jan 15 14:29:41 [32216] DBG:tm:set_timer: relative timeout is 500000 Jan 15 14:29:41 [32216] DBG:tm:insert_timer_unsafe: [4]: 0xb614313c (115600000) Jan 15 14:29:41 [32216] DBG:tm:set_timer: relative timeout is 30 Jan 15 14:29:41 [32216] DBG:tm:insert_timer_unsafe: [0]: 0xb6143158 (145) Jan 15 14:29:41 [32216] DBG:tm:t_relay_to: new transaction fwd'ed Jan 15 14:29:41 [32216] DBG:tm:t_unref: UNREF_UNSAFE: after is 0 Jan 15 14:29:41 [32216] DBG:core:destroy_avp_list: destroying list (nil) Jan 15 14:29:41 [32216] DBG:core:receive_msg: cleaning up Jan 15 14:29:42 [32219] DBG:tm:utimer_routine: timer routine:4, tl=0xb614313c next=(nil), timeout=115600000 Jan 15 14:29:42 [32219] DBG:tm:retransmission_handler: retransmission_handler : request resending (t=0xb6142ff0, INVITE si ... ) Jan 15 14:29:42 [32219] DBG:tm:set_timer: relative timeout is 1000000 Jan 15 14:29:42 [32219] DBG:tm:insert_timer_unsafe: [5]: 0xb614313c (116600000) Jan 15 14:29:42 [32219] DBG:tm:retransmission_handler: retransmission_handler : done Jan 15 14:29:43 [32219] DBG:tm:utimer_routine: timer routine:5, tl=0xb614313c next=(nil), timeout=116600000 Jan 15 14:29:43 [32219] DBG:tm:retransmission_handler: retransmission_handler : request resending (t=0xb6142ff0, INVITE si ... ) Jan 15 14:29:43 [32219] DBG:tm:set_timer: relative timeout is 2000000 Jan 15 14:29:43 [32219] DBG:tm:insert_timer_unsafe: [6]: 0xb614313c (118600000) Jan 15 14:29:43 [32219] DBG:tm:retransmission_handler: retransmission_handler : done Jan 15 14:29:45 [32219] DBG:tm:utimer_routine: timer routine:6, tl=0xb614313c next=(nil), timeout=118600000 Jan 15 14:29:45 [32219] DBG:tm:retransmission_handler: retransmission_handler : request resending (t=0xb6142ff0, INVITE si ... ) Jan 15 14:29:45 [32219] DBG:tm:set_timer: relative timeout is 4000000 Jan 15 14:29:45 [32219] DBG:tm:insert_timer_unsafe: [7]: 0xb614313c (122600000) Jan 15 14:29:45 [32219] DBG:tm:retransmission_handler: retransmission_handler : done Jan 15 14:29:46 [32219] DBG:dbtext:dbt_db_get_table: cache or mtime succeeded Jan 15 14:29:46 [32219] DBG:dbtext:dbt_insert: done! Jan 15 14:29:49 [32219] DBG:tm:utimer_routine: timer routine:7, tl=0xb614313c next=(nil), timeout=122600000 Jan 15 14:29:49 [32219] DBG:tm:retransmission_handler: retransmission_handler : request resending (t=0xb6142ff0, INVITE si ... ) Jan 15 14:29:49 [32219] DBG:tm:set_timer: relative timeout is 4000000 Jan 15 14:29:49 [32219] DBG:tm:insert_timer_unsafe: [7]: 0xb614313c (126600000) Jan 15 14:29:49 [32219] DBG:tm:retransmission_handler: retransmission_handler : done Jan 15 14:29:53 [32219] DBG:tm:utimer_routine: timer routine:7, tl=0xb614313c next=(nil), timeout=126600000 Jan 15 14:29:53 [32219] DBG:tm:retransmission_handler: retransmission_handler : request resending (t=0xb6142ff0, INVITE si ... ) Jan 15 14:29:53 [32219] DBG:tm:set_timer: relative timeout is 4000000 Jan 15 14:29:53 [32219] DBG:tm:insert_timer_unsafe: [7]: 0xb614313c (130600000) Jan 15 14:29:53 [32219] DBG:tm:retransmission_handler: retransmission_handler : done Jan 15 14:29:54 [32215] DBG:core:udp_rcv_loop: probing packet received from 190.132.174.xxx 46843 Jan 15 14:29:57 [32219] DBG:tm:utimer_routine: timer routine:7, tl=0xb614313c next=(nil), timeout=130600000 Jan 15 14:29:57 [32219] DBG:tm:retransmission_handler: retransmission_handler : request resending (t=0xb6142ff0, INVITE si ... ) Jan 15 14:29:57 [32219] DBG:tm:set_timer: relative timeout is 4000000 Jan 15 14:29:57 [32219] DBG:tm:insert_timer_unsafe: [7]: 0xb614313c (134600000) Jan 15 14:29:57 [32219] DBG:tm:retransmission_handler: retransmission_handler : done Jan 15 14:30:01 [32219] DBG:tm:utimer_routine: timer routine:7, tl=0xb614313c next=(nil), timeout=134600000 Jan 15 14:30:01 [32219] DBG:tm:retransmission_handler: retransmission_handler : request resending (t=0xb6142ff0, INVITE si ... ) Jan 15 14:30:01 [32219] DBG:tm:set_timer: relative timeout is 4000000 Jan 15 14:30:01 [32219] DBG:tm:insert_timer_unsafe: [7]: 0xb614313c (138600000) Jan 15 14:30:01 [32219] DBG:tm:retransmission_handler: retransmission_handler : done Jan 15 14:30:05 [32219] DBG:tm:utimer_routine: timer routine:7, tl=0xb614313c next=(nil), timeout=138600000 Jan 15 14:30:05 [32219] DBG:tm:retransmission_handler: retransmission_handler : request resending (t=0xb6142ff0, INVITE si ... ) Jan 15 14:30:05 [32219] DBG:tm:set_timer: relative timeout is 4000000 Jan 15 14:30:05 [32219] DBG:tm:insert_timer_unsafe: [7]: 0xb614313c (142600000) Jan 15 14:30:05 [32219] DBG:tm:retransmission_handler: retransmission_handler : done Jan 15 14:30:09 [32219] DBG:tm:utimer_routine: timer routine:7, tl=0xb614313c next=(nil), timeout=142600000 Jan 15 14:30:09 [32219] DBG:tm:retransmission_handler: retransmission_handler : request resending (t=0xb6142ff0, INVITE si ... ) Jan 15 14:30:09 [32219] DBG:tm:set_timer: relative timeout is 4000000 Jan 15 14:30:09 [32219] DBG:tm:insert_timer_unsafe: [7]: 0xb614313c (146600000) Jan 15 14:30:09 [32219] DBG:tm:retransmission_handler: retransmission_handler : done Jan 15 14:30:11 [32219] DBG:tm:timer_routine: timer routine:0, tl=0xb6143158 next=(nil), timeout=145 Jan 15 14:30:11 [32219] DBG:tm:final_response_handler: stop retr. and send CANCEL (0xb6142ff0) Jan 15 14:30:11 [32219] DBG:tm:t_should_relay_response: T_code=100, new_code=408 Jan 15 14:30:11 [32219] DBG:tm:t_pick_branch: picked branch 0, code 408 Jan 15 14:30:11 [32219] DBG:tm:is_3263_failure: dns-failover test: branch=0, last_recv=408, flags=1 Jan 15 14:30:11 [32219] DBG:tm:t_should_relay_response: trying DNS- based failover Jan 15 14:30:11 [32219] DBG:tm:relay_reply: branch=0, save=0, relay=0 Jan 15 14:30:11 [32219] DBG:core:parse_headers: flags=ffffffffffffffff Jan 15 14:30:11 [32219] DBG:core:check_via_address: params 190.132.174. xxx, 190.132.174.xxx, 0 Jan 15 14:30:11 [32219] DBG:tm:set_timer: relative timeout is 500000 Jan 15 14:30:11 [32219] DBG:tm:insert_timer_unsafe: [4]: 0xb61430b8 (145500000) Jan 15 14:30:11 [32219] DBG:tm:set_timer: relative timeout is 30 Jan 15 14:30:11 [32219] DBG:tm:insert_timer_unsafe: [0]: 0xb61430d4 (175) Jan 15 14:30:11 [32219] DBG:tm:relay_reply: sent buf=0x81801f0: SIP/2. 0 4..., shmem=0xb6144bc8: SIP/2.0 4 Jan 15 14:30:11 [32219] DBG:tm:final_response_handler: done Jan 15 14:30:12 [32219] DBG:tm:utimer_routine: timer routine:4, tl=0xb61430b8 next=(nil), timeout=145500000 Jan 15 14:30:12 [32219] DBG:tm:retransmission_handler: retransmission_handler : reply resending (t=0xb6142ff0, SIP/2.0 4 ... ) Jan 15 14:30:12 [32219] DBG:tm:t_retransmit_reply: buf=0x3c4860: SIP/2. 0 4..., shmem=0xb6144bc8: SIP/2.0 4 Jan 15 14:30:12 [32219] DBG:tm:set_timer: relative timeout is 1000000 Jan 15 14:30:12 [32219] DBG:tm:insert_timer_unsafe: [5]: 0xb61430b8 (146500000) Jan 15 14:30:12 [32219] DBG:tm:retransmission_handler: retransmission_handler : done Jan 15 14:30:12 [32217] DBG:core:parse_msg: SIP Request: Jan 15 14:30:12 [32217] DBG:core:parse_msg: method: <ACK> Jan 15 14:30:12 [32217] DBG:core:parse_msg: uri: <sip:751@200.40. xxx.xxx> Jan 15 14:30:12 [32217] DBG:core:parse_msg: version: <SIP/2.0> Jan 15 14:30:12 [32217] DBG:core:parse_headers: flags=2 Jan 15 14:30:12 [32217] DBG:core:parse_via_param: found param type 232, <branch> = <z9hG4bK-d87543-40390549c060936b-1--d87543->; state=6 Jan 15 14:30:12 [32217] DBG:core:parse_via_param: found param type 235, <rport> = <n/a>; state=17 Jan 15 14:30:12 [32217] DBG:core:parse_via: end of header reached, state=5 Jan 15 14:30:12 [32217] DBG:core:parse_headers: via found, flags=2 Jan 15 14:30:12 [32217] DBG:core:parse_headers: this is the first via Jan 15 14:30:12 [32217] DBG:core:receive_msg: After parse_msg... Jan 15 14:30:12 [32217] DBG:core:receive_msg: preparing to run routing scripts... Jan 15 14:30:12 [32217] DBG:sl:sl_filter_ACK: to late to be a local ACK! Jan 15 14:30:12 [32217] DBG:core:parse_headers: flags=100 Jan 15 14:30:12 [32217] DBG:core:parse_to_param: tag=a675395d39bf06a14f949f34d60ba9bb-be39 Jan 15 14:30:12 [32217] DBG:core:parse_to: end of header reached, state=29 Jan 15 14:30:12 [32217] DBG:core:parse_to: display={"751"}, ruri={sip: 751(a)200.40.xxx.xxx} Jan 15 14:30:12 [32217] DBG:core:get_hdr_field: <To> [73]; uri=[sip: 751(a)200.40.xxx.xxx] Jan 15 14:30:12 [32217] DBG:core:get_hdr_field: to body ["751"<sip: 751(a)200.40.xxx.xxx>] Jan 15 14:30:12 [32217] DBG:core:get_hdr_field: cseq <CSeq>: <1> <ACK> Jan 15 14:30:12 [32217] DBG:core:get_hdr_field: content_length=0 Jan 15 14:30:12 [32217] DBG:core:get_hdr_field: found end of header Jan 15 14:30:12 [32217] DBG:maxfwd:is_maxfwd_present: max_forwards header not found! Jan 15 14:30:12 [32217] DBG:core:parse_to_param: tag=747fa53e Jan 15 14:30:12 [32217] DBG:core:parse_to: end of header reached, state=29 Jan 15 14:30:12 [32217] DBG:core:parse_to: display={"pruebas ser desde adsl"}, ruri={sip:100%40netgate.com@200.40.xxx.xxx} Jan 15 14:30:12 [32217] DBG:core:parse_headers: flags=200 Jan 15 14:30:12 [32217] DBG:rr:find_first_route: No Route headers found Jan 15 14:30:12 [32217] DBG:rr:loose_route: There is no Route HF Jan 15 14:30:12 [32217] DBG:core:grep_sock_info: checking if host==us: 14==13 && [200.40.xxx.xxx] == [192.168.1.200] Jan 15 14:30:12 [32217] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 15 14:30:12 [32217] DBG:core:grep_sock_info: checking if host==us: 14==14 && [200.40.xxx.xxx] == [200.40.xxx.xxx] Jan 15 14:30:12 [32217] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 15 14:30:12 [32217] DBG:core:grep_sock_info: checking if host==us: 14==13 && [200.40.xxx.xxx] == [192.168.1.200] Jan 15 14:30:12 [32217] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 15 14:30:12 [32217] DBG:core:grep_sock_info: checking if host==us: 14==14 && [200.40.xxx.xxx] == [200.40.xxx.xxx] Jan 15 14:30:12 [32217] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 15 14:30:12 [32217] DBG:registrar:lookup: '751' Not found in usrloc Jan 15 14:30:12 [32217] DBG:core:grep_sock_info: checking if host==us: 14==13 && [200.40.xxx.xxx] == [192.168.1.200] Jan 15 14:30:12 [32217] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 15 14:30:12 [32217] DBG:core:grep_sock_info: checking if host==us: 14==14 && [200.40.xxx.xxx] == [200.40.xxx.xxx] Jan 15 14:30:12 [32217] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 15 14:30:12 [32217] DBG:registrar:lookup: '751' Not found in usrloc Jan 15 14:30:12 [32217] DBG:core:destroy_avp_list: destroying list (nil) Jan 15 14:30:12 [32217] DBG:core:receive_msg: cleaning up Jan 15 14:30:12 [32215] DBG:core:parse_msg: SIP Request: Jan 15 14:30:12 [32215] DBG:core:parse_msg: method: <ACK> Jan 15 14:30:12 [32215] DBG:core:parse_msg: uri: <sip:751@200.40. xxx.xxx> Jan 15 14:30:12 [32215] DBG:core:parse_msg: version: <SIP/2.0> Jan 15 14:30:12 [32215] DBG:core:parse_headers: flags=2 Jan 15 14:30:12 [32215] DBG:core:parse_via_param: found param type 232, <branch> = <z9hG4bK-d87543-40390549c060936b-1--d87543->; state=6 Jan 15 14:30:12 [32215] DBG:core:parse_via_param: found param type 235, <rport> = <n/a>; state=17 Jan 15 14:30:12 [32215] DBG:core:parse_via: end of header reached, state=5 Jan 15 14:30:12 [32215] DBG:core:parse_headers: via found, flags=2 Jan 15 14:30:12 [32215] DBG:core:parse_headers: this is the first via Jan 15 14:30:12 [32215] DBG:core:receive_msg: After parse_msg... Jan 15 14:30:12 [32215] DBG:core:receive_msg: preparing to run routing scripts... Jan 15 14:30:12 [32215] DBG:sl:sl_filter_ACK: to late to be a local ACK! Jan 15 14:30:12 [32215] DBG:core:parse_headers: flags=100 >----Mensaje original---- >De: ggb(a)tid.es >Fecha: 06/12/2007 11:03 >Para: "Lista de usuarios de OpenSER"<users-es(a)lists.openser.org> >Asunto: Re: [OpenSER-Users-ES] Problemas Forward de llamadas de openser a Asterisk > >Puedes mandar una captura del wireshark en tu SER a ver que pasa con el >INVITE cuando lo mandas desde Internet? > >G. > >On Tue, 2008-01-15 at 05:49 -0800, Andresdb wrote: >> Estimado amigos, >> >> Tengo el siguiente inconveniente y la situación es la siguiente: >> INTERNET----<ippublica SER x.x.x.x:5060>----ServerSER----<iplan SER >> 192.168.1.200:5060>--LAN--<iplan Asterisk 192.168.1.201:5060> >> Lo que queremos hacer es utilizar SER como un proxy para no exponer asterisk >> a una ip publica. >> Si me registro contra el openser con la ip de lan el forward de las llamadas >> al Asterisk se hace correctamente, pero si intento registrarme contra la ip >> publica me registro al ser pero no puedo hacer llamadas, el forward a la ip >> de astrerisk no se hace, te detallo la configuración del cfg de ser, les >> agradezco mucho en lo que me puedan ayudar. >> >> openser.cfg >> # ----------- global configuration parameters ------------------------ >> >> debug=7 # debug level (cmd line: -dddddddddd) >> fork=yes >> log_stderror=yes # (cmd line: -E) >> >> check_via=no # (cmd. line: -v) >> dns=no # (cmd. line: -r) >> rev_dns=no # (cmd. line: -R) >> children=4 >> >> listen=192.168.1.200 >> listen=200.40.119.215 >> port=5060 >> >> # ------------------ module loading ---------------------------------- >> >> # use dbtext database >> mpath="/usr/local/lib/openser/modules/" >> loadmodule "dbtext.so" >> loadmodule "sl.so" >> loadmodule "tm.so" >> loadmodule "rr.so" >> loadmodule "maxfwd.so" >> loadmodule "usrloc.so" >> loadmodule "registrar.so" >> loadmodule "textops.so" >> loadmodule "mi_fifo.so" >> #loadmodule "mediaproxy.so" >> #loadmodule "nathelper.so" >> #loadmodule "acc.so" >> #loadmodule "exec.so" >> #loadmodule "xlog.so" >> >> # modules for digest authentication >> loadmodule "auth.so" >> loadmodule "auth_db.so" >> >> # ----------------- setting module-specific parameters --------------- >> >> # -- mi_fifo params -- >> >> modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") >> >> # -- nathelper >> #modparam("nathelper", "rtpproxy_disable", 1) >> #modparam("nathelper", "natping_interval", 30) >> #modparam("nathelper", "sipping_from", "sip:ping@192.168.0.7") >> >> # -- usrloc params -- >> >> # use dbtext database for persistent storage >> modparam("usrloc", "db_mode", 2) >> modparam("usrloc|auth_db", "db_url", >> "dbtext:///usr/local/etc/openser/dbtext") >> >> # -- auth params -- >> # >> modparam("auth_db", "calculate_ha1", 1) >> modparam("auth_db", "password_column", "password") >> modparam("auth_db", "user_column", "username") >> modparam("auth_db", "domain_column", "domain") >> >> # -- rr params -- >> # add value to ;lr param to make some broken UAs happy >> modparam("rr", "enable_full_lr", 1) >> >> # ------------------------- request routing logic ------------------- >> >> # main routing logic >> >> route{ >> # initial sanity checks -- messages with >> # max_forwards==0, or excessively long requests >> if (!mf_process_maxfwd_header("10")) { >> sl_send_reply("483","Too Many Hops"); >> exit; >> }; >> if (msg:len >= max_len ) { >> sl_send_reply("513", "Message too big"); >> exit; >> }; >> >> # we record-route all messages -- to make sure that >> # subsequent messages will go through our proxy; that's >> # particularly good if upstream and downstream entities >> # use different transport protocol >> if (!method=="REGISTER") record_route(); >> >> # subsequent messages withing a dialog should take the >> # path determined by record-routing >> if (loose_route()) { >> # mark routing logic in request >> append_hf("P-hint: rr-enforced\r\n"); >> route(1); >> exit; >> }; >> >> if (!uri==myself) { >> # mark routing logic in request >> append_hf("P-hint: outbound\r\n"); >> route(1); >> exit; >> }; >> if (is_method("INVITE")) { >> rewritehostport("192.168.1.201:5060"); >> t_relay(); >> exit; >> } >> # if the request is for other domain use UsrLoc >> # (in case, it does not work, use the following command >> # with proper names and addresses in it) >> if (uri==myself) { >> if (method=="REGISTER") { >> # digest authentication >> if (!www_authorize("*", "subscriber")) { >> www_challenge("*", "0"); >> exit; >> }; >> >> save("location"); >> exit; >> }; >> >> lookup("aliases"); >> if (!uri==myself) { >> append_hf("P-hint: outbound alias\r\n"); >> route(1); >> exit; >> }; >> >> # native SIP destinations are handled using our USRLOC DB >> if (!lookup("location")) { >> sl_send_reply("404", "Not Found"); >> exit; >> }; >> }; >> append_hf("P-hint: usrloc applied\r\n"); >> route(1); >> } >> >> route[1] >> { >> # send it out now; use stateful forwarding as it works reliably >> # even for UDP2TCP >> if (!t_relay()) { >> sl_reply_error(); >> }; >> } >> > > > >_______________________________________________ >Users-es mailing list >Users-es(a)lists.openser.org >http://lists.openser.org/cgi-bin/mailman/listinfo/users-es >

1 0

Re: [OpenSER-Users-ES] Problemas Forward de llamadas de openser a Asterisk
by andresdb＠adinet.com.uy 15 Jan '08

15 Jan '08

Estimado, Correcto, desde un teléfono con ip publica me registro al ser que esta en una ip publica, el servidor ser tiene dos tarjetas de red una para la ip publica y otra para la lan que es donde este el asterisk, no puedo llamar desde ese teléfono al asterisk no escucho el ringing, si me registro a la ip privada del ser(LAN) puedo llamar al asterisk, se escuha el ringing y puedo establecer una comunicación. Saludos, >----Mensaje original---- >De: ibc(a)in.ilimit.es >Fecha: 15/01/2008 10:57 >Para: <users-es(a)lists.openser.org> >Asunto: Re: [OpenSER-Users-ES] Problemas Forward de llamadas de openser a Asterisk > >On Tuesday 15 January 2008 14:49:04 Andresdb wrote: >> Si me registro contra el openser con la ip de lan el forward de las >> llamadas al Asterisk se hace correctamente, pero si intento registrarme >> contra la ip publica me registro al ser pero no puedo hacer llamadas, el >> forward a la ip de astrerisk no se hace > >A ver si he entendido: > >Si te registras en Openser desde un tfno en una IP pública externa, entonces >no puedes llamar desde ese tfno al Asterisk, ¿es eso? > >En caso afirmativo: > >- Pon una extensión en Asterisk tal que así: > exten => test,1,Ringing > exten => test,n,Wait(4) > exten => test,n,Answer > exten => test,n,Echo > >- Llama desde el tfno externo a esa extensión. > >¿Escuchas el ringing en el tfno? > > >-- >Iñaki Baz Castillo >ibc(a)in.ilimit.es > >_______________________________________________ >Users-es mailing list >Users-es(a)lists.openser.org >http://lists.openser.org/cgi-bin/mailman/listinfo/users-es >

2 1

[OpenSER-Users-ES] Problemas Forward de llamadas de openser a Asterisk
by Andresdb 15 Jan '08

15 Jan '08

Estimado amigos, Tengo el siguiente inconveniente y la situación es la siguiente: INTERNET----<ippublica SER x.x.x.x:5060>----ServerSER----<iplan SER 192.168.1.200:5060>--LAN--<iplan Asterisk 192.168.1.201:5060> Lo que queremos hacer es utilizar SER como un proxy para no exponer asterisk a una ip publica. Si me registro contra el openser con la ip de lan el forward de las llamadas al Asterisk se hace correctamente, pero si intento registrarme contra la ip publica me registro al ser pero no puedo hacer llamadas, el forward a la ip de astrerisk no se hace, te detallo la configuración del cfg de ser, les agradezco mucho en lo que me puedan ayudar. openser.cfg # ----------- global configuration parameters ------------------------ debug=7 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) children=4 listen=192.168.1.200 listen=200.40.119.215 port=5060 # ------------------ module loading ---------------------------------- # use dbtext database mpath="/usr/local/lib/openser/modules/" loadmodule "dbtext.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" #loadmodule "mediaproxy.so" #loadmodule "nathelper.so" #loadmodule "acc.so" #loadmodule "exec.so" #loadmodule "xlog.so" # modules for digest authentication loadmodule "auth.so" loadmodule "auth_db.so" # ----------------- setting module-specific parameters --------------- # -- mi_fifo params -- modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") # -- nathelper #modparam("nathelper", "rtpproxy_disable", 1) #modparam("nathelper", "natping_interval", 30) #modparam("nathelper", "sipping_from", "sip:ping@192.168.0.7") # -- usrloc params -- # use dbtext database for persistent storage modparam("usrloc", "db_mode", 2) modparam("usrloc|auth_db", "db_url", "dbtext:///usr/local/etc/openser/dbtext") # -- auth params -- # modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("auth_db", "user_column", "username") modparam("auth_db", "domain_column", "domain") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); exit; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); exit; }; if (is_method("INVITE")) { rewritehostport("192.168.1.201:5060"); t_relay(); exit; } # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # digest authentication if (!www_authorize("*", "subscriber")) { www_challenge("*", "0"); exit; }; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); exit; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } -- View this message in context: http://www.nabble.com/Problemas-Forward-de-llamadas-de-openser-a-Asterisk-t… Sent from the OpenSER Users - ES mailing list archive at Nabble.com.

3 2

[OpenSER-Users-ES] Problemas de Auithentication
by David Villasmil 14 Jan '08

14 Jan '08

Chicos, Como es normal, no quiero que nadie llame si estar registrado... tengo lo siguiente en mi conf: if (uri==myself) { if (method=="REGISTER") { if (!www_authorize("sip.midom.com", "subscriber")) { www_challenge("sip.midom.com", "0"); exit; }; if (isflagset(5)) { setbflag(6); # if you want OPTIONS natpings uncomment next # setflag(7); }; save("location"); exit; }; if (method=="INVITE") { if (!proxy_authorize("sip.midom.com","subscriber")) { proxy_challenge("sip.midom..com","0"); exit; }else{ if($si=="GW1"||$si=="GW2"){ xlog("L_NOTICE", "\n************** ALLOWING INCOMING CALL AS IT COMES FROM $si ************\n"); } } if (uri=~"^sip:001"){ route(4); } . . . pero ahora tengo problemas de DECLINED con muchos clientes cuando hacen llamadas... qué hay de malo arriba?? Un saludo David

2 4

[OpenSER-Users-ES] Problemas de Auithentication
by David Villasmil 14 Jan '08

14 Jan '08

Perdonad, El problema es cuando una llamada viene de GW1/GW2... que les da DECLINED Ideas? David

1 0

[OpenSER-Users-ES] ¿Es adecuado alterar el "From" en llamadas con "peering" o dentro del mismo proveedor?
by Iñaki Baz Castillo 14 Jan '08

14 Jan '08

Hola, supongamos que un cliente_A de un proveedor SIP llama a un número PSTN ajeno al proveedor. Entonces el proveedor le añade alguna cabecera (RPID y/o PAI) y la manda al gateway PSTN, que acepta dicha cabecera y la muestra como callerid. Pero ahora supongamos que el cliente_A llama a un número PSTN que se corresponde con otro cliente_B del mismo proveedor. Es decir, la llamada no sale del proveedor. Ahora bien, si no tocamos nada raro, el INVITE llegará finalmente a un teléfono SIP que mostrará como callerid el "From" original, cuando era de esperar (por los usuarios) que el callerid fuese el número PSTN asociado al cliente_A. En este caso de nada vale la cabecera PAI o RPID puesto que los teléfonos SIP generalmente muestran el From. En este caso sólo se me ocurre alterar el From, bien a nivel de proxy o al pasar la llamada por algún B2BUA del sistema. ¿Es "legítimo" hacerlo en este caso? ¿qué otra alternativa nos queda sino? PD: Otro escenario similar sería el de una llamada entre proveedores SIP con acuerdos de peering. ¿Sería lógico requerir de una cabecera "RPID" o "PAI" en el acuerdo y modificar el From con dicha cabecera antes de entregar la llamada a nuestros usuarios? En fin, la PSTN siempre poniendo trabas... incluso cuando la esquivas XD Gracias por cualquier aclaración. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

2 8

[OpenSER-Users-ES] Seguridad en cabeceras y parámetros
by Iñaki Baz Castillo 14 Jan '08

14 Jan '08

Hola, si llega un INVITE con la cabecera: Call-Info:;answer-after=0 algunos UAS descolgarán automáticamente la llamada. Pues hombre, está bien pero representa a todas luces un posible problema de seguridad y privacidad (¿¿espionaje?? XD). Tal vez el proxy sólo debería permitirse este tipo de cabeceras en ciertas condiciones (llamada desde el B2BUA y cosas así). De hecho así lo prevee el RFC 3261 respecto de las cabeceras Call-Info y Alert-Info. El caso es que en Asterisk éste problema no existe puesto que del INVITE que le llega al que Asterisk genera no se parece ni el "From" (y no es coña). Pero sé que otros B2BUA actúan de manera más transparente replicando las cabeceras desconocidas. En este último caso me pregunto si existe algún listado de cabeceras o parámetros que deba vigilar a parte de los mencionados. Se me ocurren: - Call-Info - Alert-Info - RPID - PAI ¿Alguno más? Gracias. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

3 3

[OpenSER-Users-ES] ¿Se puede enviar DTMF durante el Early Media?
by Iñaki Baz Castillo 14 Jan '08

14 Jan '08

Hola, algo que fastidia a todo el mundo es el tema de que te cobren una llamada nada más salir el buzón de voz. Lo lógico y deseable (al margen de la actitud avariciosa de las grandes operadoras) es que al llamar a un número y salir el buzón de voz no se cobre la llamada y se ofrezca la posibilidad de dejar un mensaje pulsando algún dígito. El impedimento técnico que veo es que parece ser no se permite el envío de DTMF durante el EarlyMedia. Pero no encuentro documentación sobre ello. El caso es que durante el EarlyMedia el audio es bidireccional, o sea, el SDP del "183 Session Progress" dice: a=sendrecv (de hecho esto lo he verificado también a nivel de gateway PSTN: una llamada desde la PSTN a un gateway y éste la dirige a un SIP UAS que responde con 183, y el gateway envía y recibe audio desde el UAS). A todo esto una duda que tengo es precisamente esto de poder enviar y recibir audio durante un EarlyMedia, ¿se puede o no se puede? ¿se hace? Por otra parte, mi Twinkle no me permite enviar DTMF durante el EarlyMedia, pero vamos, que ni lo intenta por lo que no sé qué pasaría si sí me dejase. Y por las pruebas que he hecho llamando desde la PSTN (fijo y móvil) y respondiendo con un EarlyMedia, tampoco parece que se permita el envío de DTMF. En fin, que la única opción honesta que he encontrado es la de reproducir el mensaje del buzón en EarlyMedia, y sólo tras el mensaje responder la llamada para que el llamante deje su mensaje (y sólo en ese caso provocar que tenga que pagar su llamada). Con lo fácil que es... lo cab***as que son las compañías. Bueno, sin más, que no sé exactamente cuál es mi pregunta pero tal vez alguien me ayude a definirla XD Saludos. -- Iñaki Baz Castillo

4 8

[OpenSER-Users-ES] Modificar el cuerpo de los responses (200 OK + SDP)
by Gustavo Sutil Vega 11 Jan '08

11 Jan '08

Hola a tod@s. Alguien sabe como modificar el cuerpo de los replys? Para enviar un response en modo stateless se que se emplea sl_send_reply, pero solo toma como argumentos el codigo de error y la causa. Sabe alguien si se puede añadir un body a la respuesta? Lo que necesito es devolver mensajes 200 OK que porteen un SDP elegido por mi en el body. Se puede hacer esto con algun modulo disponible o habria que toquetear el codigo del modulo SL? Muchas gracias a todos!

3 4

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

sr-users-es January 2008