October 2003 - sr-users

[Serusers] Message Waiting Indicator
by Josh Newman 06 Oct '03

06 Oct '03

Does anyone know how I can send from ser a NOTIFY (or is perhaps INFO) message to a Cisco ATA 186 or other UA to turn on/off the message waiting indicator for voicemail. The Cisco ATA is capable of playing a stuttered dial tone to indicate voicemail but I cannot find any documentation on how to toggle this tone on/off from the proxy. I also have other sip phones like the Grandstream where I would like to signal the MWI to it as well. Does anyone know how this can be done? I assume via the ser_fifo, but what kind of message and what should it look like? -- Josh

5 5

[Serusers] Meaning of ftag-Parameter
by Franz Edler 06 Oct '03

06 Oct '03

Hello, Can anybody please tell me the meaning of the ftag-Parameter in Record-Route Header which SER uses? e.g.: Record-Route: <sip:409870@192.246.69.223;ftag=180507275;lr=on> Franz

3 2

[Serusers] prob with acc module
by John Foster 06 Oct '03

06 Oct '03

Hi all Here are lines from my ser.cfg modparam("acc", "radius_missed_flag", 3) modparam("acc", "radius_log_flag", 1) # ------------------------- request routing logic ------------------- I m getting Oct 6 00:07:45 voice ser: set_mod_param_regex: parameter <radius_log_flag> not found in module <acc> Oct 6 00:07:45 voice ser: parse error (73,37-38): Can't set module parameter in logs, ser doesnt run, while compiled acc module with radius support ON, ser isnt recognizing radius_log_flag param. Any idea? JF --------------------------------- Do you Yahoo!? The New Yahoo! Shopping - with improved product search

2 1

RE: [Serusers] voicemail question - dial plan example - pstngatewayexample
by GIL, Jaime 06 Oct '03

06 Oct '03

Steve, Have you tried using "append_branch()" after "rewritehostport(<new uri>)"? Jaime From: Steve Dolloff <sdolloff(a)noc.dls.net> on 03/10/2003 15:04 To: Alexander Mayrhofer <axelm(a)nic.at>@SMTP@Exchange Jiri Kuthan <jiri(a)iptel.org>@SMTP@Exchange serusers@lists.iptel.org@SMTP@Exchange cc: Subject: RE: [Serusers] voicemail question - dial plan example - pstngatewayexample Any other suggestions? Subject: Re: [Serusers] voicemail question - dial plan example - pstngateway example On (02.10.03 23:28), Alexander Mayrhofer wrote: > replacing > > rewritehostport("219.242.10.153:5061"); > > with > > append_branch("sip:219.242.10.153:5061"); > > in the fialure_route should do the trick. err, i hate replying to my own mails. The above line will make you loose the user part of the URI, and is therefore not a working solution ... we'd need a function to reset the branch status value here, which afaik does currently not exist ... axelm _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers ******************************************************************************* Important. Confidentiality: This communication is intended for the above-named person and may be confidential and/or legally privileged. Any opinions expressed in this communication are not necessarily those of the company. If it has come to you in error you must take no action based on it, nor must you copy or show it to anyone; please delete/destroy and inform the sender immediately. Monitoring/Viruses Orange may monitor all incoming and outgoing emails in line with current legislation. Although we have taken steps to ensure that this email and attachments are free from any virus, we advise that in keeping with good computing practice the recipient should ensure they are actually virus free. Orange PCS Limited is a subsidiary of Orange SA and is registered in England No 2178917, with its address at St James Court, Great Park Road, Almondsbury Park, Bradley Stoke, Bristol BS32 4QJ. *******************************************************************************

1 0

Re: [Serusers] Message Waiting Indicator
by Jiri Kuthan 05 Oct '03

05 Oct '03

I'm not sure how the "turn-off-lamp" NOTIFY is supposed to look like either. Someone requested us to send Cisco's "reboot" NOTIFY, which is implemented in serctl using ser_fifo. If you learn how the NOTIFY is supposed to look like, aligning serctl to your need should be fairly simple. -jiri At 05:13 AM 10/5/2003, Josh Newman wrote: >Content-Type: multipart/alternative; > boundary="----_=_NextPart_001_01C38AEE.A0208F26" >Content-class: urn:content-classes:message > >Does anyone know how I can send from ser a NOTIFY (or is perhaps INFO) message to a Cisco ATA 186 or other UA to turn on/off the message waiting indicator for voicemail. The Cisco ATA is capable of playing a stuttered dial tone to indicate voicemail but I cannot find any documentation on how to toggle this tone on/off from the proxy. I also have other sip phones like the Grandstream where I would like to signal the MWI to it as well. Does anyone know how this can be done? I assume via the ser_fifo, but what kind of message and what should it look like? > > > >-- Josh >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

1 0

RE: [Serusers] caller-id with raius using sip-rpid
by Steve Dolloff 05 Oct '03

05 Oct '03

I want caller-id to work for a subscriber who has a non-numeric username. Subject: Re: [Serusers] caller-id with raius using sip-rpid There is a Remote-Party-ID header in your message. What else do you want ? Please be more specific and provide some examples, your terminology is hard to follow for me, sorry. Jan. On 03-10 16:05, Steve Dolloff wrote: > Calling from one ata to another, proxied and registered through ser, > here is my ngrep port 5060 output. Remote-party-id is being set but not > the call-id. > > U 219.242.10.153:5060 -> 226.145.234.80:5060 > INVITE sip:256@226.145.234.80:5060;user=phone;transport=udp > SIP/2.0..Max-Fo > rwards: 10..Record-Route: > <sip:256@219.242.10.153;ftag=2441840520;lr=on>..V > ia: SIP/2.0/UDP 219.242.10.153;branch=z9hG4bK41f3.9e2c3976.0..Via: > SIP/2.0/ > UDP 226.145.234.113:5060;rport=5060..From: > sip:test@voip2.test.net;tag=24418 > 40520..To: <sip:256@voip2.test.net;user=phone>..Call-ID: > 2303820380(a)226.145. > 234.113..CSeq: 2 INVITE..Contact: > <sip:test@226.145.234.113:5060;transport= > udp>..User-Agent: Cisco ATA 186 v2.16.2 ata18x > (030909a)..Authorization: D > igest > username="test",realm="voip2.test.net",nonce="3f7de542de99d4e832372e6b > > 812a73562d346e6f",uri="sip:256@voip2.test.net",response="1a4552ce6c65333 > 439b > 6a97672f415a5"..Expires: 300..Content-Length: 271..Content-Type: > applicatio > n/sdp..Remote-Party-ID: > 222;party=calling;id-type=subscriber;screen=no....v > =0..o=test 5648 5648 IN IP4 226.145.234.113..s=ATA186 Call..c=IN IP4 > 226.14 > 5.234.113..t=0 0..m=audio 16384 RTP/AVP 0 4 8 101..a=rtpmap:0 > PCMU/8000/1.. > a=rtpmap:4 G723/8000/1..a=rtpmap:8 PCMA/8000/1..a=rtpmap:101 > telephone-even > t/8000..a=fmtp:101 0-15..a=direction:active.. > # > U 226.145.234.80:5060 -> 219.242.10.153:5060 > SIP/2.0 100 Trying..Via: SIP/2.0/UDP > 219.242.10.153;branch=z9hG4bK41f3.9e2c > 3976.0..Via: SIP/2.0/UDP 226.145.234.113:5060;rport=5060..From: > sip:test@vo > ip2.test.net;tag=2441840520..To: > <sip:256@voip2.test.net;user=phone>;tag=2077 > 559661..Call-ID: 2303820380@226.145.234.113..CSeq: 2 INVITE..Server: > Cisco > ATA 186 v2.16.2 ata18x (030909a)..Content-Length: 0.... > > > Subject: Re: [Serusers] caller-id with raius using sip-rpid > > Is there any Remote-Party-ID header field in outgoing INVITE ? If so > then your gateway/whatever ignores it. > > Jan. > > On 02-10 15:18, Steve Dolloff wrote: > > Any phone that supports caller-id. But I haven't gotten to work. I'm > > seeing the username instead. > > > > > > Subject: RE: [Serusers] caller-id with raius using sip-rpid > > > > Which phone device should I use to see caller ID > > information when using the ATA186? > > > > Alejandro > > > > --- Steve Dolloff <sdolloff(a)noc.test.net> escreveu: > > > At the top of the config I have the following > > > statement.... > > > > > > if (method=="INVITE") { > > > record_route(); > > > if (!radius_www_authorize("")) { > > > log(1,"radius auth > > > failure"); > > > > > > www_challenge("voip2.test.net","0"); > > > break; > > > }; > > > append_rpid_hf(); > > > }; > > > > > > If I call a phone with caller-id and my username is > > > 256, it shows 256 on > > > the phone, if I call with a username of test, it > > > shows 4534 on the > > > handset even though I have the sip-rpid set to 222. > > > > > > Stephen > > > > > > > > > Subject: Re: [Serusers] caller-id with raius using > > > sip-rpid > > > > > > Retrieving caller-id when users register doesn't > > > work because REGISTER > > > messages are processed by the server and the server > > > generates a reply > > > only. > > > > > > What you need is to insert Remote-Party-ID header > > > field into INVITE > > > message, to make it work you must authenticate also > > > INVITE messages. > > > My guess is that you do not authenticate INVITE > > > messages and therefore > > > there is nothing append_rpid_hf can add. > > > > > > Jan. > > > > > > On 02-10 11:35, Steve Dolloff wrote: > > > > I want to retrieve the caller-id of a user from > > > radius when they > > > > register and use it when I redirect an invite > > > request to the voicemail > > > > system so that the voicemail system can route the > > > call based on > > > > caller-id. I also want to be able to send it to > > > the sip gateway when > > > I > > > > am routing calls to the pstn. > > > > > > > > I have this in my config currently and it doesn't > > > appear to set the > > > > caller-id in the invite message. > > > > > > > > > > > rewritehostport("219.242.10.153:5061"); > > > > append_rpid_hf(); > > > > t_relay(); > > > > > > > > > > > > Subject: Re: [Serusers] caller-id with raius using > > > sip-rpid > > > > > > > > append_rpid_hf has no parameters. Version with 2 > > > parameters is in > > > > unstable branch in the CVS only. What exactly do > > > you want to do ? > > > > > > > > Jan. > > > > > > > > On 02-10 11:26, Steve Dolloff wrote: > > > > > I found this example in a previous Serusers > > > message. > > > > > > > > > > append_rpid_hf("<sip:+", > > > > > > > > > > > > > > > > > > > > "@zettou.net>;party=calling;id-type=subscriber;privacy=off;screen=yes"); > > > > > > > > > > I tried calling append_rpid_hf();, but it does > > > nothing. > > > > > > > > > > I also tried > > > > > > > > > > > > > > > append_rpid_hf("party=calling;id-type=subscriber;privacy=off;screen=yes" > > > > > ); but I get an unknown command presumably > > > because I am not using > > > the > > > > > right number of parameters. > > > > > > > > > > I only want to modify the calling-id info. > > > > > > > > > > Can anyone provide an example? > > > > > > > > > > -----Original Message----- > > > > > From: Jan Janak [mailto:jan@iptel.org] > > > > > Sent: Thursday, October 02, 2003 11:09 AM > > > > > To: Steve Dolloff > > > > > Cc: serusers(a)lists.iptel.org > > > > > Subject: Re: [Serusers] caller-id with raius > > > using sip-rpid > > > > > > > > > > If you want to add Remote-Party-ID header field > > > then you have to > > > call > > > > > append_rpid_hf function in your script. > > > > > > > > > > Jan. > > > > > > > > > > On 02-10 11:07, Steve Dolloff wrote: > > > > > > OK, I am setting up a Voicemail system (using > > > asterisk) and I am > > > > > > currently doing a rewritehostport(ip:port) and > > > then trelay() to > > > send > > > > > it > > > > > > to the voicemail system if an invite fails. > > > > > > > > > > > > Should I change something? See my ser.cfg and > > > output from the call > > > > to > > > > > > the vm. > > > > > > > > > > > > Here is the code from ser.cfg > > > > > > > > > > > > > > > > > rewritehostport("219.242.10.153:5061"); > > > > > > t_relay(); > > > > > > > > > > > > Here is the sip info from asterisk. > > > > > > > > > > > > INVITE sip:200@219.242.10.153:5061;user=phone > > > SIP/2.0 > > > > > > Max-Forwards: 10 > > > > > > Record-Route: > > > <sip:200@219.242.10.153;ftag=2236658534;lr=on> > > > > > > Via: SIP/2.0/UDP > > > 219.242.10.153;branch=z9hG4bK13de.31901234.0 > > > > > > Via: SIP/2.0/UDP > > > 226.145.234.113:5060;rport=5060 > > > > > > From: sip:test@voip2.test.net;tag=2236658534 > > > > > > To: <sip:200@voip2.test.net;user=phone> > > > > > > Call-ID: 2218108971(a)226.145.234.113 > > > > > > CSeq: 1 INVITE > > > > > > Contact: > > > <sip:test@226.145.234.113:5060;transport=udp> > > > > > > User-Agent: Cisco ATA 186 v2.16.2 ata18x > > > (030909a) > > > > > > Expires: 300 > > > > > > Content-Length: 271 > > > > > > Content-Type: application/sdp > > > > > > > > > > > > > > > > > > > > > > > > Subject: Re: [Serusers] caller-id with raius > > > using sip-rpid > > > > > > > > > > > > Remote-Party-ID header field is inserted into > > > forwarded requests, > > > > not > > > > > > responses. > > > > > > > > > > > > Jan. > > > > > > > > > > > > On 02-10 10:53, Steve Dolloff wrote: > > > > > > > Ser doesn't appear to be passing the > > > Caller-id to the ata at > > > auth > > > > or > > > > > I > > > > > > > am doing something wrong. Can anyone point > > > me in the right > > > > > direction? > > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > > > Stephen > > > > > > > > > > > > > > I have the following entry in my freeradius > > > users file. > > > > > > > > > > > > > > test(a)voip2.test.net Auth-Type := Digest, > > > User-Password == "test" > > > > > > > Reply-Message = "Hello, test with > > > digest", Sip-Rpid = > > > > > > > "8472222222" > > > > > > > > > > > > > > When I run a radclient test I get the > > > correct info.. > > > > > > > > > > > > > > radclient -f digest.test 219.242.10.153:1812 > > > auth testing > > > > > > > Received response ID 134, code 2, length = > > > 57 > > > > > === message truncated === > > > > Yahoo! Mail - o melhor webmail do Brasil > > http://mail.yahoo.com.br

3 2

[Serusers] login for serweb ?
by H�kan 05 Oct '03

05 Oct '03

Where do I register the login for login on ./www.html/admin/index.php ? I just can not figuer it out:-( I hade a thoute it was al-right. But no.... Regardes Håkan

2 2

[Serusers] rtpproxy updated
by Maxim Sobolev 05 Oct '03

05 Oct '03

Hi folks, I've updated rtpproxy tarball to the latest version. New features include: - support for IPv6, courtesy of Jan Janak <jan(a)iptel.org>. This new feature allows rtpproxy to be used as IPv4/IPv6 RTP bridge. - rtpproxy now allocates only even ports for RTP. This is necessary to ensure that RTCP packets generated by one session will not interfere with another RTP session. Latest version is available for downloading from: http://www.portaone.com/~sobomax/rtpproxy.tar Enjoy! -Maxim

4 4

[Serusers] Problem with Radius Auth, any hint?
by John Foster 04 Oct '03

04 Oct '03

Hi I m using RADIATOR with ser0.8.11, while ser is running it doesnt send req to radius, following are snapd of log generated at ser (ngrep o/p) # U 202.133.64.66:5060 -> 202.133.64.71:5060 REGISTER sip:voice.cooking.com.pk SIP/2.0..Via: SIP/2.0/UDP 202.133.64.66;branch=z9hG4bKnp1730137267-43b5a45e202.133.64.6 6..From: <sip:12321@voice.cooking.com.pk>;tag=671fccba..To: <sip:12321@voice.cooking.com.pk>..Call-ID: 1969536413-43c1d03 a@1969536416-43c1d037..Contact: <sip:12321@202.133.64.66>;expires=600;q=0.500..Expires: 600..CSeq: 22 REGISTER..Content- Length: 0..User-Agent: Ahead SIPPS IP Phone Version 2.0.42.13.... # U 202.133.64.71:5060 -> 202.133.64.66:5060 SIP/2.0 401 Unauthorized..Via: SIP/2.0/UDP 202.133.64.66;branch=z9hG4bKnp1730137267-43b5a45e202.133.64.66..From: <sip:123 ;tag=671fccba..To">21(a)voice.cooking.com.pk>;tag=671fccba..To: <sip:12321@voice.cooking.com.pk>;tag=b27e1a1d33761e85846fc98f5f3a7e58.bdca..Ca ll-ID: 1969536413-43c1d03a@1969536416-43c1d037..CSeq: 22 REGISTER..WWW-Authenticate: Digest realm="cooking.com.pk", nonce ="3f7d19d62902cb25358e2c666df77d1369d90974"..Server: Sip EXpress router (0.8.11 (i386/linux))..Content-Length: 0..Warning : 392 202.133.64.71:5060 "Noisy feedback tells: pid=13339 req_src_ip=202.133.64.66 req_src_port=5060 in_uri=sip:voice.co oking.com.pk out_uri=sip:voice.cooking.com.pk via_cnt==1".... While here is my ser.cfg # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_dbs", "calculate_ha1", yes) modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") modparam("auth_radius", "service_type", 15) : : : : # Uncomment this if you want to use digest authentication if (!radius_www_authorize("cooking.com.pk")) { www_challenge("cooking.com.pk", "0"); break; }; Any hint? JF --------------------------------- Do you Yahoo!? The New Yahoo! Shopping - with improved product search

2 6

[Serusers] Cool thing called Cuphone - be your own longdistance provider!
by Shahriar Chowdhury 04 Oct '03

04 Oct '03

I just found out about this thing called cuphone! http://store.yahoo.com/cuphone/index.html They let you setup a gateway at home where you can call in from anywhere in the world, using their software. I have unlimited long distance service, so I can actually call in from my school using my laptop, and make unlimited long distance calls through my phone line! If the voice quality is really good with their USB phone hardware, I can let my friends call from my laptop to anywhere in the US, provided they buy me lunch. This is a good way to put POTS to work. SIP = Sexy Internet Product ! Shahriar Chowdhury http://freewareCDs.com - The OpenSource Solution Provider.

2 1

[Serusers] packet8 and sipphone compatibility
by Shahriar Chowdhury 04 Oct '03

04 Oct '03

I see from a 2-week old press release that packet8.net and sipphone.com are supposed to be compatible, but what are the updates on that? I have packet8.net (really good service for $20) and wish to get a sipphone for my girlfriend so that we can talk to each other for free, without requiring a separate number from packet8. FWD is also offering the same phone for much cheaper price, so I might just get that. The only reason I would get sipphone.com's phone will be because of packet8 compatibility. Did anyone notice the superb possibilities of sipphone in customer service on VOIP? http://fwd.pulver.com/callme.php?userid=**7474745000 I can use this activeX program to dial FWD or sipphone.com customers. This also means if I have a sipphone, my customers can call me! Since FWD comes with free voicemail now, I think it has really nice future in click-to-talk customer service sector. Shahriar Chowdhury http://freewareCDs.com - The OpenSource Solution Provider.

1 0

RE: [Serusers] caller-id with raius using sip-rpid
by Steve Dolloff 03 Oct '03

03 Oct '03

OK, I think this conversation must have been confused by geographic barriers. In north America, when you call someone your phone number shows up on their phone. The Caller-ID or ANI. Strangely, the username of the from address is showing up in my caller-id window.... if the username is 256(a)test.com, 256 shows up as the caller-id. If the username is test(a)test.com, 4534 shows up as the caller-id. I want it to show up as 1XXXXXXXXXX. Maybe there is a telephony guru on the list that is more familiar with the north American conventions that can help me to explain it better. This field is mandatory for voice services here to identify the caller to emergency services. Subject: Re: [Serusers] caller-id with raius using sip-rpid What is caller-id ? Is is a header field or what ? Example, please.... Jan. On 03-10 16:21, Steve Dolloff wrote: > I want caller-id to work for a subscriber who has a non-numeric > username. > > Subject: Re: [Serusers] caller-id with raius using sip-rpid > > There is a Remote-Party-ID header in your message. What else do you > want ? Please be more specific and provide some examples, your > terminology is > hard to follow for me, sorry. > > Jan. > > On 03-10 16:05, Steve Dolloff wrote: > > Calling from one ata to another, proxied and registered through ser, > > here is my ngrep port 5060 output. Remote-party-id is being set but > not > > the call-id. > > > > U 219.242.10.153:5060 -> 226.145.234.80:5060 > > INVITE sip:256@226.145.234.80:5060;user=phone;transport=udp > > SIP/2.0..Max-Fo > > rwards: 10..Record-Route: > > <sip:256@219.242.10.153;ftag=2441840520;lr=on>..V > > ia: SIP/2.0/UDP 219.242.10.153;branch=z9hG4bK41f3.9e2c3976.0..Via: > > SIP/2.0/ > > UDP 226.145.234.113:5060;rport=5060..From: > > sip:test@voip2.test.net;tag=24418 > > 40520..To: <sip:256@voip2.test.net;user=phone>..Call-ID: > > 2303820380(a)226.145. > > 234.113..CSeq: 2 INVITE..Contact: > > <sip:test@226.145.234.113:5060;transport= > > udp>..User-Agent: Cisco ATA 186 v2.16.2 ata18x > > (030909a)..Authorization: D > > igest > > username="test",realm="voip2.test.net",nonce="3f7de542de99d4e832372e6b > > > > > 812a73562d346e6f",uri="sip:256@voip2.test.net",response="1a4552ce6c65333 > > 439b > > 6a97672f415a5"..Expires: 300..Content-Length: 271..Content-Type: > > applicatio > > n/sdp..Remote-Party-ID: > > 222;party=calling;id-type=subscriber;screen=no....v > > =0..o=test 5648 5648 IN IP4 226.145.234.113..s=ATA186 Call..c=IN IP4 > > 226.14 > > 5.234.113..t=0 0..m=audio 16384 RTP/AVP 0 4 8 101..a=rtpmap:0 > > PCMU/8000/1.. > > a=rtpmap:4 G723/8000/1..a=rtpmap:8 PCMA/8000/1..a=rtpmap:101 > > telephone-even > > t/8000..a=fmtp:101 0-15..a=direction:active.. > > # > > U 226.145.234.80:5060 -> 219.242.10.153:5060 > > SIP/2.0 100 Trying..Via: SIP/2.0/UDP > > 219.242.10.153;branch=z9hG4bK41f3.9e2c > > 3976.0..Via: SIP/2.0/UDP 226.145.234.113:5060;rport=5060..From: > > sip:test@vo > > ip2.test.net;tag=2441840520..To: > > <sip:256@voip2.test.net;user=phone>;tag=2077 > > 559661..Call-ID: 2303820380@226.145.234.113..CSeq: 2 INVITE..Server: > > Cisco > > ATA 186 v2.16.2 ata18x (030909a)..Content-Length: 0.... > > > > > > Subject: Re: [Serusers] caller-id with raius using sip-rpid > > > > Is there any Remote-Party-ID header field in outgoing INVITE ? If so > > then your gateway/whatever ignores it. > > > > Jan. > > > > On 02-10 15:18, Steve Dolloff wrote: > > > Any phone that supports caller-id. But I haven't gotten to work. > I'm > > > seeing the username instead. > > > > > > > > > Subject: RE: [Serusers] caller-id with raius using sip-rpid > > > > > > Which phone device should I use to see caller ID > > > information when using the ATA186? > > > > > > Alejandro > > > > > > --- Steve Dolloff <sdolloff(a)noc.test.net> escreveu: > > > > At the top of the config I have the following > > > > statement.... > > > > > > > > if (method=="INVITE") { > > > > record_route(); > > > > if (!radius_www_authorize("")) { > > > > log(1,"radius auth > > > > failure"); > > > > > > > > www_challenge("voip2.test.net","0"); > > > > break; > > > > }; > > > > append_rpid_hf(); > > > > }; > > > > > > > > If I call a phone with caller-id and my username is > > > > 256, it shows 256 on > > > > the phone, if I call with a username of test, it > > > > shows 4534 on the > > > > handset even though I have the sip-rpid set to 222. > > > > > > > > Stephen > > > > > > > > > > > > Subject: Re: [Serusers] caller-id with raius using > > > > sip-rpid > > > > > > > > Retrieving caller-id when users register doesn't > > > > work because REGISTER > > > > messages are processed by the server and the server > > > > generates a reply > > > > only. > > > > > > > > What you need is to insert Remote-Party-ID header > > > > field into INVITE > > > > message, to make it work you must authenticate also > > > > INVITE messages. > > > > My guess is that you do not authenticate INVITE > > > > messages and therefore > > > > there is nothing append_rpid_hf can add. > > > > > > > > Jan. > > > > > > > > On 02-10 11:35, Steve Dolloff wrote: > > > > > I want to retrieve the caller-id of a user from > > > > radius when they > > > > > register and use it when I redirect an invite > > > > request to the voicemail > > > > > system so that the voicemail system can route the > > > > call based on > > > > > caller-id. I also want to be able to send it to > > > > the sip gateway when > > > > I > > > > > am routing calls to the pstn. > > > > > > > > > > I have this in my config currently and it doesn't > > > > appear to set the > > > > > caller-id in the invite message. > > > > > > > > > > > > > > rewritehostport("219.242.10.153:5061"); > > > > > append_rpid_hf(); > > > > > t_relay(); > > > > > > > > > > > > > > > Subject: Re: [Serusers] caller-id with raius using > > > > sip-rpid > > > > > > > > > > append_rpid_hf has no parameters. Version with 2 > > > > parameters is in > > > > > unstable branch in the CVS only. What exactly do > > > > you want to do ? > > > > > > > > > > Jan. > > > > > > > > > > On 02-10 11:26, Steve Dolloff wrote: > > > > > > I found this example in a previous Serusers > > > > message. > > > > > > > > > > > > append_rpid_hf("<sip:+", > > > > > > > > > > > > > > > > > > > > > > > > > > > "@zettou.net>;party=calling;id-type=subscriber;privacy=off;screen=yes"); > > > > > > > > > > > > I tried calling append_rpid_hf();, but it does > > > > nothing. > > > > > > > > > > > > I also tried > > > > > > > > > > > > > > > > > > > > > append_rpid_hf("party=calling;id-type=subscriber;privacy=off;screen=yes" > > > > > > ); but I get an unknown command presumably > > > > because I am not using > > > > the > > > > > > right number of parameters. > > > > > > > > > > > > I only want to modify the calling-id info. > > > > > > > > > > > > Can anyone provide an example? > > > > > > > > > > > > -----Original Message----- > > > > > > From: Jan Janak [mailto:jan@iptel.org] > > > > > > Sent: Thursday, October 02, 2003 11:09 AM > > > > > > To: Steve Dolloff > > > > > > Cc: serusers(a)lists.iptel.org > > > > > > Subject: Re: [Serusers] caller-id with raius > > > > using sip-rpid > > > > > > > > > > > > If you want to add Remote-Party-ID header field > > > > then you have to > > > > call > > > > > > append_rpid_hf function in your script. > > > > > > > > > > > > Jan. > > > > > > > > > > > > On 02-10 11:07, Steve Dolloff wrote: > > > > > > > OK, I am setting up a Voicemail system (using > > > > asterisk) and I am > > > > > > > currently doing a rewritehostport(ip:port) and > > > > then trelay() to > > > > send > > > > > > it > > > > > > > to the voicemail system if an invite fails. > > > > > > > > > > > > > > Should I change something? See my ser.cfg and > > > > output from the call > > > > > to > > > > > > > the vm. > > > > > > > > > > > > > > Here is the code from ser.cfg > > > > > > > > > > > > > > > > > > > > rewritehostport("219.242.10.153:5061"); > > > > > > > t_relay(); > > > > > > > > > > > > > > Here is the sip info from asterisk. > > > > > > > > > > > > > > INVITE sip:200@219.242.10.153:5061;user=phone > > > > SIP/2.0 > > > > > > > Max-Forwards: 10 > > > > > > > Record-Route: > > > > <sip:200@219.242.10.153;ftag=2236658534;lr=on> > > > > > > > Via: SIP/2.0/UDP > > > > 219.242.10.153;branch=z9hG4bK13de.31901234.0 > > > > > > > Via: SIP/2.0/UDP > > > > 226.145.234.113:5060;rport=5060 > > > > > > > From: sip:test@voip2.test.net;tag=2236658534 > > > > > > > To: <sip:200@voip2.test.net;user=phone> > > > > > > > Call-ID: 2218108971(a)226.145.234.113 > > > > > > > CSeq: 1 INVITE > > > > > > > Contact: > > > > <sip:test@226.145.234.113:5060;transport=udp> > > > > > > > User-Agent: Cisco ATA 186 v2.16.2 ata18x > > > > (030909a) > > > > > > > Expires: 300 > > > > > > > Content-Length: 271 > > > > > > > Content-Type: application/sdp > > > > > > > > > > > > > > > > > > > > > > > > > > > > Subject: Re: [Serusers] caller-id with raius > > > > using sip-rpid > > > > > > > > > > > > > > Remote-Party-ID header field is inserted into > > > > forwarded requests, > > > > > not > > > > > > > responses. > > > > > > > > > > > > > > Jan. > > > > > > > > > > > > > > On 02-10 10:53, Steve Dolloff wrote: > > > > > > > > Ser doesn't appear to be passing the > > > > Caller-id to the ata at > > > > auth > > > > > or > > > > > > I > > > > > > > > am doing something wrong. Can anyone point > > > > me in the right > > > > > > direction? > > > > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > > > > > Stephen > > > > > > > > > > > > > > > > I have the following entry in my freeradius > > > > users file. > > > > > > > > > > > > > > > > test(a)voip2.test.net Auth-Type := Digest, > > > > User-Password == "test" > > > > > > > > Reply-Message = "Hello, test with > > > > digest", Sip-Rpid = > > > > > > > > "8472222222" > > > > > > > > > > > > > > > > When I run a radclient test I get the > > > > correct info.. > > > > > > > > > > > > > > > > radclient -f digest.test 219.242.10.153:1812 > > > > auth testing > > > > > > > > Received response ID 134, code 2, length = > > > > 57 > > > > > > > === message truncated === > > > > > > Yahoo! Mail - o melhor webmail do Brasil > > > http://mail.yahoo.com.br

2 1

RE: [Serusers] caller-id with raius using sip-rpid
by Steve Dolloff 03 Oct '03

03 Oct '03

Calling from one ata to another, proxied and registered through ser, here is my ngrep port 5060 output. Remote-party-id is being set but not the call-id. U 219.242.10.153:5060 -> 226.145.234.80:5060 INVITE sip:256@226.145.234.80:5060;user=phone;transport=udp SIP/2.0..Max-Fo rwards: 10..Record-Route: <sip:256@219.242.10.153;ftag=2441840520;lr=on>..V ia: SIP/2.0/UDP 219.242.10.153;branch=z9hG4bK41f3.9e2c3976.0..Via: SIP/2.0/ UDP 226.145.234.113:5060;rport=5060..From: sip:test@voip2.test.net;tag=24418 40520..To: <sip:256@voip2.test.net;user=phone>..Call-ID: 2303820380(a)226.145. 234.113..CSeq: 2 INVITE..Contact: <sip:test@226.145.234.113:5060;transport= udp>..User-Agent: Cisco ATA 186 v2.16.2 ata18x (030909a)..Authorization: D igest username="test",realm="voip2.test.net",nonce="3f7de542de99d4e832372e6b 812a73562d346e6f",uri="sip:256@voip2.test.net",response="1a4552ce6c65333 439b 6a97672f415a5"..Expires: 300..Content-Length: 271..Content-Type: applicatio n/sdp..Remote-Party-ID: 222;party=calling;id-type=subscriber;screen=no....v =0..o=test 5648 5648 IN IP4 226.145.234.113..s=ATA186 Call..c=IN IP4 226.14 5.234.113..t=0 0..m=audio 16384 RTP/AVP 0 4 8 101..a=rtpmap:0 PCMU/8000/1.. a=rtpmap:4 G723/8000/1..a=rtpmap:8 PCMA/8000/1..a=rtpmap:101 telephone-even t/8000..a=fmtp:101 0-15..a=direction:active.. # U 226.145.234.80:5060 -> 219.242.10.153:5060 SIP/2.0 100 Trying..Via: SIP/2.0/UDP 219.242.10.153;branch=z9hG4bK41f3.9e2c 3976.0..Via: SIP/2.0/UDP 226.145.234.113:5060;rport=5060..From: sip:test@vo ip2.test.net;tag=2441840520..To: <sip:256@voip2.test.net;user=phone>;tag=2077 559661..Call-ID: 2303820380@226.145.234.113..CSeq: 2 INVITE..Server: Cisco ATA 186 v2.16.2 ata18x (030909a)..Content-Length: 0.... Subject: Re: [Serusers] caller-id with raius using sip-rpid Is there any Remote-Party-ID header field in outgoing INVITE ? If so then your gateway/whatever ignores it. Jan. On 02-10 15:18, Steve Dolloff wrote: > Any phone that supports caller-id. But I haven't gotten to work. I'm > seeing the username instead. > > > Subject: RE: [Serusers] caller-id with raius using sip-rpid > > Which phone device should I use to see caller ID > information when using the ATA186? > > Alejandro > > --- Steve Dolloff <sdolloff(a)noc.test.net> escreveu: > > At the top of the config I have the following > > statement.... > > > > if (method=="INVITE") { > > record_route(); > > if (!radius_www_authorize("")) { > > log(1,"radius auth > > failure"); > > > > www_challenge("voip2.test.net","0"); > > break; > > }; > > append_rpid_hf(); > > }; > > > > If I call a phone with caller-id and my username is > > 256, it shows 256 on > > the phone, if I call with a username of test, it > > shows 4534 on the > > handset even though I have the sip-rpid set to 222. > > > > Stephen > > > > > > Subject: Re: [Serusers] caller-id with raius using > > sip-rpid > > > > Retrieving caller-id when users register doesn't > > work because REGISTER > > messages are processed by the server and the server > > generates a reply > > only. > > > > What you need is to insert Remote-Party-ID header > > field into INVITE > > message, to make it work you must authenticate also > > INVITE messages. > > My guess is that you do not authenticate INVITE > > messages and therefore > > there is nothing append_rpid_hf can add. > > > > Jan. > > > > On 02-10 11:35, Steve Dolloff wrote: > > > I want to retrieve the caller-id of a user from > > radius when they > > > register and use it when I redirect an invite > > request to the voicemail > > > system so that the voicemail system can route the > > call based on > > > caller-id. I also want to be able to send it to > > the sip gateway when > > I > > > am routing calls to the pstn. > > > > > > I have this in my config currently and it doesn't > > appear to set the > > > caller-id in the invite message. > > > > > > > > rewritehostport("219.242.10.153:5061"); > > > append_rpid_hf(); > > > t_relay(); > > > > > > > > > Subject: Re: [Serusers] caller-id with raius using > > sip-rpid > > > > > > append_rpid_hf has no parameters. Version with 2 > > parameters is in > > > unstable branch in the CVS only. What exactly do > > you want to do ? > > > > > > Jan. > > > > > > On 02-10 11:26, Steve Dolloff wrote: > > > > I found this example in a previous Serusers > > message. > > > > > > > > append_rpid_hf("<sip:+", > > > > > > > > > > > > > > "@zettou.net>;party=calling;id-type=subscriber;privacy=off;screen=yes"); > > > > > > > > I tried calling append_rpid_hf();, but it does > > nothing. > > > > > > > > I also tried > > > > > > > > > > append_rpid_hf("party=calling;id-type=subscriber;privacy=off;screen=yes" > > > > ); but I get an unknown command presumably > > because I am not using > > the > > > > right number of parameters. > > > > > > > > I only want to modify the calling-id info. > > > > > > > > Can anyone provide an example? > > > > > > > > -----Original Message----- > > > > From: Jan Janak [mailto:jan@iptel.org] > > > > Sent: Thursday, October 02, 2003 11:09 AM > > > > To: Steve Dolloff > > > > Cc: serusers(a)lists.iptel.org > > > > Subject: Re: [Serusers] caller-id with raius > > using sip-rpid > > > > > > > > If you want to add Remote-Party-ID header field > > then you have to > > call > > > > append_rpid_hf function in your script. > > > > > > > > Jan. > > > > > > > > On 02-10 11:07, Steve Dolloff wrote: > > > > > OK, I am setting up a Voicemail system (using > > asterisk) and I am > > > > > currently doing a rewritehostport(ip:port) and > > then trelay() to > > send > > > > it > > > > > to the voicemail system if an invite fails. > > > > > > > > > > Should I change something? See my ser.cfg and > > output from the call > > > to > > > > > the vm. > > > > > > > > > > Here is the code from ser.cfg > > > > > > > > > > > > > > rewritehostport("219.242.10.153:5061"); > > > > > t_relay(); > > > > > > > > > > Here is the sip info from asterisk. > > > > > > > > > > INVITE sip:200@219.242.10.153:5061;user=phone > > SIP/2.0 > > > > > Max-Forwards: 10 > > > > > Record-Route: > > <sip:200@219.242.10.153;ftag=2236658534;lr=on> > > > > > Via: SIP/2.0/UDP > > 219.242.10.153;branch=z9hG4bK13de.31901234.0 > > > > > Via: SIP/2.0/UDP > > 226.145.234.113:5060;rport=5060 > > > > > From: sip:test@voip2.test.net;tag=2236658534 > > > > > To: <sip:200@voip2.test.net;user=phone> > > > > > Call-ID: 2218108971(a)226.145.234.113 > > > > > CSeq: 1 INVITE > > > > > Contact: > > <sip:test@226.145.234.113:5060;transport=udp> > > > > > User-Agent: Cisco ATA 186 v2.16.2 ata18x > > (030909a) > > > > > Expires: 300 > > > > > Content-Length: 271 > > > > > Content-Type: application/sdp > > > > > > > > > > > > > > > > > > > > Subject: Re: [Serusers] caller-id with raius > > using sip-rpid > > > > > > > > > > Remote-Party-ID header field is inserted into > > forwarded requests, > > > not > > > > > responses. > > > > > > > > > > Jan. > > > > > > > > > > On 02-10 10:53, Steve Dolloff wrote: > > > > > > Ser doesn't appear to be passing the > > Caller-id to the ata at > > auth > > > or > > > > I > > > > > > am doing something wrong. Can anyone point > > me in the right > > > > direction? > > > > > > > > > > > > Thanks, > > > > > > > > > > > > Stephen > > > > > > > > > > > > I have the following entry in my freeradius > > users file. > > > > > > > > > > > > test(a)voip2.test.net Auth-Type := Digest, > > User-Password == "test" > > > > > > Reply-Message = "Hello, test with > > digest", Sip-Rpid = > > > > > > "8472222222" > > > > > > > > > > > > When I run a radclient test I get the > > correct info.. > > > > > > > > > > > > radclient -f digest.test 219.242.10.153:1812 > > auth testing > > > > > > Received response ID 134, code 2, length = > > 57 > > > === message truncated === > > Yahoo! Mail - o melhor webmail do Brasil > http://mail.yahoo.com.br

2 1

RE: [Serusers] caller-id with raius using sip-rpid
by Steve Dolloff 03 Oct '03

03 Oct '03

Any phone that supports caller-id. But I haven't gotten to work. I'm seeing the username instead. Subject: RE: [Serusers] caller-id with raius using sip-rpid Which phone device should I use to see caller ID information when using the ATA186? Alejandro --- Steve Dolloff <sdolloff(a)noc.dls.net> escreveu: > At the top of the config I have the following > statement.... > > if (method=="INVITE") { > record_route(); > if (!radius_www_authorize("")) { > log(1,"radius auth > failure"); > > www_challenge("voip2.test.net","0"); > break; > }; > append_rpid_hf(); > }; > > If I call a phone with caller-id and my username is > 256, it shows 256 on > the phone, if I call with a username of test, it > shows 4534 on the > handset even though I have the sip-rpid set to 222. > > Stephen > > > Subject: Re: [Serusers] caller-id with raius using > sip-rpid > > Retrieving caller-id when users register doesn't > work because REGISTER > messages are processed by the server and the server > generates a reply > only. > > What you need is to insert Remote-Party-ID header > field into INVITE > message, to make it work you must authenticate also > INVITE messages. > My guess is that you do not authenticate INVITE > messages and therefore > there is nothing append_rpid_hf can add. > > Jan. > > On 02-10 11:35, Steve Dolloff wrote: > > I want to retrieve the caller-id of a user from > radius when they > > register and use it when I redirect an invite > request to the voicemail > > system so that the voicemail system can route the > call based on > > caller-id. I also want to be able to send it to > the sip gateway when > I > > am routing calls to the pstn. > > > > I have this in my config currently and it doesn't > appear to set the > > caller-id in the invite message. > > > > > rewritehostport("209.242.10.153:5061"); > > append_rpid_hf(); > > t_relay(); > > > > > > Subject: Re: [Serusers] caller-id with raius using > sip-rpid > > > > append_rpid_hf has no parameters. Version with 2 > parameters is in > > unstable branch in the CVS only. What exactly do > you want to do ? > > > > Jan. > > > > On 02-10 11:26, Steve Dolloff wrote: > > > I found this example in a previous Serusers > message. > > > > > > append_rpid_hf("<sip:+", > > > > > > > > > "@zettou.net>;party=calling;id-type=subscriber;privacy=off;screen=yes"); > > > > > > I tried calling append_rpid_hf();, but it does > nothing. > > > > > > I also tried > > > > > > append_rpid_hf("party=calling;id-type=subscriber;privacy=off;screen=yes" > > > ); but I get an unknown command presumably > because I am not using > the > > > right number of parameters. > > > > > > I only want to modify the calling-id info. > > > > > > Can anyone provide an example? > > > > > > -----Original Message----- > > > From: Jan Janak [mailto:jan@iptel.org] > > > Sent: Thursday, October 02, 2003 11:09 AM > > > To: Steve Dolloff > > > Cc: serusers(a)lists.iptel.org > > > Subject: Re: [Serusers] caller-id with raius > using sip-rpid > > > > > > If you want to add Remote-Party-ID header field > then you have to > call > > > append_rpid_hf function in your script. > > > > > > Jan. > > > > > > On 02-10 11:07, Steve Dolloff wrote: > > > > OK, I am setting up a Voicemail system (using > asterisk) and I am > > > > currently doing a rewritehostport(ip:port) and > then trelay() to > send > > > it > > > > to the voicemail system if an invite fails. > > > > > > > > Should I change something? See my ser.cfg and > output from the call > > to > > > > the vm. > > > > > > > > Here is the code from ser.cfg > > > > > > > > > > > rewritehostport("219.242.10.153:5061"); > > > > t_relay(); > > > > > > > > Here is the sip info from asterisk. > > > > > > > > INVITE sip:200@219.242.10.153:5061;user=phone > SIP/2.0 > > > > Max-Forwards: 10 > > > > Record-Route: > <sip:200@219.242.10.153;ftag=2236658534;lr=on> > > > > Via: SIP/2.0/UDP > 219.242.10.153;branch=z9hG4bK13de.31901234.0 > > > > Via: SIP/2.0/UDP > 226.145.234.113:5060;rport=5060 > > > > From: sip:test@voip2.test.net;tag=2236658534 > > > > To: <sip:200@voip2.test.net;user=phone> > > > > Call-ID: 2218108971(a)226.145.234.113 > > > > CSeq: 1 INVITE > > > > Contact: > <sip:test@226.145.234.113:5060;transport=udp> > > > > User-Agent: Cisco ATA 186 v2.16.2 ata18x > (030909a) > > > > Expires: 300 > > > > Content-Length: 271 > > > > Content-Type: application/sdp > > > > > > > > > > > > > > > > Subject: Re: [Serusers] caller-id with raius > using sip-rpid > > > > > > > > Remote-Party-ID header field is inserted into > forwarded requests, > > not > > > > responses. > > > > > > > > Jan. > > > > > > > > On 02-10 10:53, Steve Dolloff wrote: > > > > > Ser doesn't appear to be passing the > Caller-id to the ata at > auth > > or > > > I > > > > > am doing something wrong. Can anyone point > me in the right > > > direction? > > > > > > > > > > Thanks, > > > > > > > > > > Stephen > > > > > > > > > > I have the following entry in my freeradius > users file. > > > > > > > > > > test(a)voip2.test.net Auth-Type := Digest, > User-Password == "test" > > > > > Reply-Message = "Hello, test with > digest", Sip-Rpid = > > > > > "8472222222" > > > > > > > > > > When I run a radclient test I get the > correct info.. > > > > > > > > > > radclient -f digest.test 219.242.10.153:1812 > auth testing > > > > > Received response ID 134, code 2, length = > 57 > === message truncated === Yahoo! Mail - o melhor webmail do Brasil http://mail.yahoo.com.br

2 1

[Serusers] memory error
by Philippe Petit 03 Oct '03

03 Oct '03

Hi all, I get a memory error while starting ser with sems. I'm running a Linux red Hat 9.0 with all updates, I have 512 MB ram, ser 0.8.11 and the latest sems rpm. I'm using the cfg file for voicemail described in the admin guide 0.8.11 Is there other conf to apply? thanks for any help Cordialement Philippe _______________________

2 1

[Serusers] SIP UA that supports PGP
by Wouter Prins 03 Oct '03

03 Oct '03

Hello, Does someone know of a SIP UA that has support for end-to-end encryption by using PGP or some other application for encryption of SIP message body's? Does SER have support for hop-to-hop encryption or some other sort? Would love to hear it! Thanks in advance! Met vriendelijke groet, Q&I Wouter Prins Q&I NEDERLAND BV Delftech Park 35 - 37 P.O. Box 402 - 2600 AK DELFT Phone [+31] 15-8880444 - Fax [+31] 15-8880445 info(a)qi.nl - www.qi.nl

2 1

[Serusers] voicemail on failure_route and user is subscriber questions
by Gavin Bensom 03 Oct '03

03 Oct '03

Jiri wrote: There is other problem though -- the failure_route logic for VM should be different from that in route block -- you can't create transaction state two times (first time with t_relay, second time with t_newtran). SER will certainly complain with some error message in your logs. ----------------------- Can anyone tell me how to set up vm to work on a failure route. I've tried several times and although Jiri says the logic has to be different because you can't create a transaction two times, I can't figure out how to make it work, and I haven't found any documentation detailing this issue. I have seen the errors in the logs that verify what Jiri is saying. Jiri said that he'd introduce new commands to hide tansaction functionality from script writers, but I'd like to know how to make this work without those new commands. Also, is there a command that queries whether or not a sip message is for a user in the subscriber table? I need to know if the user exists regardless of whether or not lookup("location") = true. Thanks, G --------------------------------- Do you Yahoo!? The New Yahoo! Shopping - with improved product search

3 3

[Serusers] 400 fifo_uac: next hop address expected
by jaime.gil＠orange.co.uk 03 Oct '03

03 Oct '03

Hi, When trying to send a SIP message through the fifo server, it comes back with an error: "400 fifo_uac: next hop address expected" What could be causing this and how could we monitor what gets in and out of the fifo? Thanks! Jaime ******************************************************************************* Important. Confidentiality: This communication is intended for the above-named person and may be confidential and/or legally privileged. Any opinions expressed in this communication are not necessarily those of the company. If it has come to you in error you must take no action based on it, nor must you copy or show it to anyone; please delete/destroy and inform the sender immediately. Monitoring/Viruses Orange may monitor all incoming and outgoing emails in line with current legislation. Although we have taken steps to ensure that this email and attachments are free from any virus, we advise that in keeping with good computing practice the recipient should ensure they are actually virus free. Orange PCS Limited is a subsidiary of Orange SA and is registered in England No 2178917, with its address at St James Court, Great Park Road, Almondsbury Park, Bradley Stoke, Bristol BS32 4QJ. *******************************************************************************

3 2

RE: [Serusers] Implementing Voicemail
by Steve Dolloff 03 Oct '03

03 Oct '03

>> I did place this portion inside the myself check >>and it still tries to transfer to vm after the time expires. >I'm puzzled -- did not you want to transfer to vm after the time expires? I will try to make this clearer. I am behind an ATA with a SIP proxy of 209.242.10.153. If I call someone else registered on my domain and they are not available, I want to go to voice mail. If I call 1-800-555-1212 from my phone, I do not want my sip proxy to reroute the call to voicemail after 10 seconds if no one answers(or ever for that matter). Right now if I dial 18005551212 from my handset, I see the destination as sip:18005551212@209.242.10.153 on the server which matches to myself and ser tries to send it to voicemail. Someone calling into the network is not a problem. They will never hit our server unless the destination is local. >>This is the part that I really need help with! When the call timer >>fails, the call goes to the route[1]. How do I get it into voice mail >>from that point? >See bellow, I think that should work. This is what I had originally, and I get the following syslog. Sep 10 16:36:36 voip2 ser: parse error (127,37-38): Command cannot be used in the block Sep 10 16:36:36 voip2 ser: ERROR: bad config file (1 errors) Sep 10 16:36:36 voip2 ser: ser startup failed Is says that vm is not valid in the block. According the admin guide, only certain commands can be used within a failure block. I assume that is the problem here. If not, please let me know as this is exactly what I want to do. >THE SAME STUFF LIKE ABOVE, YOU DON'T WANT TO t_relay ANYTHING >if(!vm("/tmp/am_fifo","voicemail")){ > t_reply("500", "SEMS >error"); > }; > break;

3 3

RE: [Serusers] voicemail question - dial plan example - pstngateway example
by Steve Dolloff 03 Oct '03

03 Oct '03

Any other suggestions? Subject: Re: [Serusers] voicemail question - dial plan example - pstngateway example On (02.10.03 23:28), Alexander Mayrhofer wrote: > replacing > > rewritehostport("219.242.10.153:5061"); > > with > > append_branch("sip:219.242.10.153:5061"); > > in the fialure_route should do the trick. err, i hate replying to my own mails. The above line will make you loose the user part of the URI, and is therefore not a working solution ... we'd need a function to reset the branch status value here, which afaik does currently not exist ... axelm

1 0

[Serusers] Directory Services
by Ng, Soo Sim 03 Oct '03

03 Oct '03

I am looking for the following feature A list of Directory Services is displayed on the serweb, (for example, Hotel List, Emergency List, Airlines List ect). A registered user will subscribe to the intended list (Eg a hotel will subsribe to the hotel list). A normal user will be able to view the selected list. The seleted list show only online members at that time. Off-line members will only be shown when they are login in. Can this feature be done? Thanks

3 2

RE: [Serusers] caller-id with raius using sip-rpid
by Steve Dolloff 03 Oct '03

03 Oct '03

At the top of the config I have the following statement.... if (method=="INVITE") { record_route(); if (!radius_www_authorize("")) { log(1,"radius auth failure"); www_challenge("voip2.test.net","0"); break; }; append_rpid_hf(); }; If I call a phone with caller-id and my username is 256, it shows 256 on the phone, if I call with a username of test, it shows 4534 on the handset even though I have the sip-rpid set to 222. Stephen Subject: Re: [Serusers] caller-id with raius using sip-rpid Retrieving caller-id when users register doesn't work because REGISTER messages are processed by the server and the server generates a reply only. What you need is to insert Remote-Party-ID header field into INVITE message, to make it work you must authenticate also INVITE messages. My guess is that you do not authenticate INVITE messages and therefore there is nothing append_rpid_hf can add. Jan. On 02-10 11:35, Steve Dolloff wrote: > I want to retrieve the caller-id of a user from radius when they > register and use it when I redirect an invite request to the voicemail > system so that the voicemail system can route the call based on > caller-id. I also want to be able to send it to the sip gateway when I > am routing calls to the pstn. > > I have this in my config currently and it doesn't appear to set the > caller-id in the invite message. > > rewritehostport("209.242.10.153:5061"); > append_rpid_hf(); > t_relay(); > > > Subject: Re: [Serusers] caller-id with raius using sip-rpid > > append_rpid_hf has no parameters. Version with 2 parameters is in > unstable branch in the CVS only. What exactly do you want to do ? > > Jan. > > On 02-10 11:26, Steve Dolloff wrote: > > I found this example in a previous Serusers message. > > > > append_rpid_hf("<sip:+", > > > > > "@zettou.net>;party=calling;id-type=subscriber;privacy=off;screen=yes"); > > > > I tried calling append_rpid_hf();, but it does nothing. > > > > I also tried > > > append_rpid_hf("party=calling;id-type=subscriber;privacy=off;screen=yes" > > ); but I get an unknown command presumably because I am not using the > > right number of parameters. > > > > I only want to modify the calling-id info. > > > > Can anyone provide an example? > > > > -----Original Message----- > > From: Jan Janak [mailto:jan@iptel.org] > > Sent: Thursday, October 02, 2003 11:09 AM > > To: Steve Dolloff > > Cc: serusers(a)lists.iptel.org > > Subject: Re: [Serusers] caller-id with raius using sip-rpid > > > > If you want to add Remote-Party-ID header field then you have to call > > append_rpid_hf function in your script. > > > > Jan. > > > > On 02-10 11:07, Steve Dolloff wrote: > > > OK, I am setting up a Voicemail system (using asterisk) and I am > > > currently doing a rewritehostport(ip:port) and then trelay() to send > > it > > > to the voicemail system if an invite fails. > > > > > > Should I change something? See my ser.cfg and output from the call > to > > > the vm. > > > > > > Here is the code from ser.cfg > > > > > > > > rewritehostport("219.242.10.153:5061"); > > > t_relay(); > > > > > > Here is the sip info from asterisk. > > > > > > INVITE sip:200@219.242.10.153:5061;user=phone SIP/2.0 > > > Max-Forwards: 10 > > > Record-Route: <sip:200@219.242.10.153;ftag=2236658534;lr=on> > > > Via: SIP/2.0/UDP 219.242.10.153;branch=z9hG4bK13de.31901234.0 > > > Via: SIP/2.0/UDP 226.145.234.113:5060;rport=5060 > > > From: sip:test@voip2.test.net;tag=2236658534 > > > To: <sip:200@voip2.test.net;user=phone> > > > Call-ID: 2218108971(a)226.145.234.113 > > > CSeq: 1 INVITE > > > Contact: <sip:test@226.145.234.113:5060;transport=udp> > > > User-Agent: Cisco ATA 186 v2.16.2 ata18x (030909a) > > > Expires: 300 > > > Content-Length: 271 > > > Content-Type: application/sdp > > > > > > > > > > > > Subject: Re: [Serusers] caller-id with raius using sip-rpid > > > > > > Remote-Party-ID header field is inserted into forwarded requests, > not > > > responses. > > > > > > Jan. > > > > > > On 02-10 10:53, Steve Dolloff wrote: > > > > Ser doesn't appear to be passing the Caller-id to the ata at auth > or > > I > > > > am doing something wrong. Can anyone point me in the right > > direction? > > > > > > > > Thanks, > > > > > > > > Stephen > > > > > > > > I have the following entry in my freeradius users file. > > > > > > > > test(a)voip2.test.net Auth-Type := Digest, User-Password == "test" > > > > Reply-Message = "Hello, test with digest", Sip-Rpid = > > > > "8472222222" > > > > > > > > When I run a radclient test I get the correct info.. > > > > > > > > radclient -f digest.test 219.242.10.153:1812 auth testing > > > > Received response ID 134, code 2, length = 57 > > > > Reply-Message = "Hello, test with digest" > > > > Sip-Rpid = "8472222222" > > > > > > > > This is the output from ngrep port 5060 > > > > > > > > U 216.222.234.113:5060 -> 219.242.10.153:5060 > > > > REGISTER sip:voip2.test.net SIP/2.0..Via: SIP/2.0/UDP > > > > 216.222.234.113:5060.. > > > > From: sip:test@voip2.test.net;tag=277486986..To: > > > > sip:test@voip2.test.net..Cal > > > > l-ID: 2687235586@216.222.234.113..CSeq: 2 REGISTER..Contact: > > > > <sip:test@216. > > > > 222.234.113:5060;transport=udp>;expires=120..User-Agent: Cisco > ATA > > > 186 > > > > v2. > > > > 16.2 ata18x (030909a)..Authorization: Digest > > > > > > > > > > username="test",realm="voip2.test.net",nonce="3f7c49b40e81572eff05bdf50c > > > > 867a85bbb0da3c",uri="sip:voip2.test > > > > > .net",response="1684410c130d6faa9a3c573365f36ab6"..Content-Length: > > > > 0.... > > > > # > > > > U 219.242.10.153:5060 -> 216.222.234.113:5060 > > > > SIP/2.0 200 OK..Via: SIP/2.0/UDP > > > > 216.222.234.113:5060;rport=5060..From: sip > > > > :test@voip2.test.net;tag=277486986..To: > > > > sip:test@voip2.test.net;tag=b27e1a1d3 > > > > 3761e85846fc98f5f3a7e58.13c2..Call-ID: > > > > 2687235586@216.222.234.113..CSeq: 2 > > > > REGISTER..Contact: > > > > <sip:test@216.222.234.113:5060;transport=udp>;q=0.00;exp > > > > ires=120..Server: Sip EXpress router (0.8.12dev-t16 > > > > (i386/linux))..Content- > > > > Length: 0..Warning: 392 219.242.10.153:5060 "Noisy feedback > tells: > > > > pid=121 > > > > 59 req_src_ip=216.222.234.113 req_src_port=5060 > > > > in_uri=sip:voip2.test.net ou > > > > t_uri=sip:voip2.test.net via_cnt==1".... > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > > > serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers

3 3

[Serusers] Problem with Radius Auth, any hint?
by John Foster 03 Oct '03

03 Oct '03

Hi I m using RADIATOR with ser0.8.11, while ser is running it doesnt send req to radius, following are snapd of log generated at ser (ngrep o/p) # U 202.133.64.66:5060 -> 202.133.64.71:5060 REGISTER sip:voice.cooking.com.pk SIP/2.0..Via: SIP/2.0/UDP 202.133.64.66;branch=z9hG4bKnp1730137267-43b5a45e202.133.64.6 6..From: <sip:12321@voice.cooking.com.pk>;tag=671fccba..To: <sip:12321@voice.cooking.com.pk>..Call-ID: 1969536413-43c1d03 a@1969536416-43c1d037..Contact: <sip:12321@202.133.64.66>;expires=600;q=0.500..Expires: 600..CSeq: 22 REGISTER..Content- Length: 0..User-Agent: Ahead SIPPS IP Phone Version 2.0.42.13.... # U 202.133.64.71:5060 -> 202.133.64.66:5060 SIP/2.0 401 Unauthorized..Via: SIP/2.0/UDP 202.133.64.66;branch=z9hG4bKnp1730137267-43b5a45e202.133.64.66..From: <sip:123 ;tag=671fccba..To">21(a)voice.cooking.com.pk>;tag=671fccba..To: <sip:12321@voice.cooking.com.pk>;tag=b27e1a1d33761e85846fc98f5f3a7e58.bdca..Ca ll-ID: 1969536413-43c1d03a@1969536416-43c1d037..CSeq: 22 REGISTER..WWW-Authenticate: Digest realm="cooking.com.pk", nonce ="3f7d19d62902cb25358e2c666df77d1369d90974"..Server: Sip EXpress router (0.8.11 (i386/linux))..Content-Length: 0..Warning : 392 202.133.64.71:5060 "Noisy feedback tells: pid=13339 req_src_ip=202.133.64.66 req_src_port=5060 in_uri=sip:voice.co oking.com.pk out_uri=sip:voice.cooking.com.pk via_cnt==1".... While here is my ser.cfg # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_dbs", "calculate_ha1", yes) modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") modparam("auth_radius", "service_type", 15) : : : : # Uncomment this if you want to use digest authentication if (!radius_www_authorize("cooking.com.pk")) { www_challenge("cooking.com.pk", "0"); break; }; Any hint? JF --------------------------------- Do you Yahoo!? The New Yahoo! Shopping - with improved product search

1 0

[Serusers] nathelper
by Dovid 03 Oct '03

03 Oct '03

Can I replace nathelper.c from ser-0.8.11 (release) with the latest from dev and recompile? I tried that and recompiled just nathelper.so. What happens now is that for fix_nated_sdp or force_rtp_proxy I get 'ERROR: extract_mediaip: no `c=' in SDP'. What is happening is that in each of those functions it calls extract_mediaip twice. The first time is OK. The 2nd it gives this error. Then when it sends out the request, it has the correct IP AND the proxy IP (e.g. 1.2.3.44.3.2.1) Does it need the full latest CVS to work? I get a mysql error with that. Thanks in advance. Dovid

2 4

RE: [Serusers] voicemail question - dial plan example - pstngateway example
by Steve Dolloff 02 Oct '03

02 Oct '03

I have been fighting with this for a month now and still can't get it work. Can someone please tell me what's wrong? Relevant configs... modparam("tm", "fr_inv_timer", 5 ) modparam("tm", "fr_timer", 10 ) t_on_failure("2"); if (!t_relay()) { sl_reply_error(); break; }; failure_route[2]{ log(1,"call sent to voicemail due to no answer\n"); rewritehostport("219.242.10.153:5061"); t_relay(); break; } I get this error in my logs..... Oct 2 15:16:13 voip2 ser[15512]: ERROR: t_forward_nonack: no branched for fwding Oct 2 15:16:13 voip2 ser[15512]: ERROR: w_t_relay (failure mode): forwarding failed -----Original Message----- From: Jiri Kuthan [mailto:jiri@iptel.org] Sent: Thursday, September 25, 2003 4:49 PM To: Gavin Bensom; serusers(a)lists.iptel.org Subject: Re: [Serusers] voicemail question - dial plan example - pstngateway example At 07:16 PM 9/25/2003, Gavin Bensom wrote: >In the ser admin guide it says > >"You can refer to voicemail example config file to know what your configuration file should include. Note that voicemail uses subsriber database table to determine recepient's email address. Read the README file in the vm module directory for complete description of the functions and variables that are used by voicemail and how they work." > >I can't find any complete descriptions of the functions and variables and how they work. The README file is very short and basic. > >In the example config file there are many calls to vm(/tmp/am_fifo", "*"); where * is "announcement" or "voicemail" or "echo" or "bye" or "conference." Are these all required in a basic voicemail setup? C If you want to setup voicemail, use just vm("/tmp/am_fifo", "voicemail"); the second parameter describes behaviour of the media component. You don't want to deploy the other examples. >an anyone point me to more information on how this works and what each of these modules are doing? > >If I call a user who isn't logged in I can hear the voicemail default greeting, but then the line goes silent. I don't think there is any voice recording happening. See ser.cfg attached. Recorder is silent when it records, that's normal behaviour. What matters is whether you then receive a WAV file by email or not. SEMS is running (you hear announcement), so you should. >Also, if a timer is set to send calls to vm (using failure_route) after a certain timeout, is there a way to prevent that timeout from killing calls routed to the PSTN? If you want failure_route to be evoked only for some calls, then set t_on_failure_route for such. You already do so in your script, don't you? There is other problem though -- the failure_route logic for VM should be different from that in route block -- you can't create transaction state two times (first time with t_relay, second time with t_newtran). SER will certainly complain with some error message in your logs. I will introduce some new command which hides details of transaction processing from script writers and can be used from both route[] and failure_route[]. (I didn't think of it before since I used voicemail on some other machine than proxy server.) -jiri > >Thanks, >G. > > >Do you Yahoo!? ><http://shopping.yahoo.com/?__yltc=s%3A150000443%2Cd%3A22708228%2Cslk%3 Atext%2Csec%3Amail>The New Yahoo! Shopping - with improved product search ># ># $Id: ser.cfg,v 1.20 2003/05/31 21:12:19 jiri Exp $ ># ># simple quick-start config script ># > ># ----------- global configuration parameters ------------------------ > >debug=3 # debug level (cmd line: -dddddddddd) >fork=yes >log_stderror=no # (cmd line: -E) > >/* Uncomment these lines to enter debugging mode >debug=8 >fork=no >log_stderror=yes >*/ > >check_via=no # (cmd. line: -v) >dns=no # (cmd. line: -r) >rev_dns=no # (cmd. line: -R) >port=5060 >children=4 >fifo="/tmp/ser_fifo" >sip_warning=no ># ># ------------------ module loading ---------------------------------- ># ># Uncomment this if you want to use SQL database >loadmodule "/usr/local/lib/ser/modules/mysql.so" ># >loadmodule "/usr/local/lib/ser/modules/sl.so" >loadmodule "/usr/local/lib/ser/modules/tm.so" >loadmodule "/usr/local/lib/ser/modules/rr.so" >loadmodule "/usr/local/lib/ser/modules/maxfwd.so" >loadmodule "/usr/local/lib/ser/modules/usrloc.so" >loadmodule "/usr/local/lib/ser/modules/registrar.so" >loadmodule "/usr/local/lib/ser/modules/vm.so" >loadmodule "/usr/local/lib/ser/modules/pa.so" >loadmodule "/usr/local/lib/ser/modules/msilo.so" >loadmodule "/usr/local/lib/ser/modules/acc.so" >loadmodule "/usr/local/lib/ser/modules/textops.so" ># >#loadmodule "/usr/local/lib/ser/modules/nathelper.so" >#loadmodule "/usr/local/lib/ser/modules/uri.so" >#loadmodule "/usr/local/lib/ser/modules/group.so" ># ># Uncomment this if you want digest authentication ># mysql.so must be loaded ! >loadmodule "/usr/local/lib/ser/modules/auth.so" >loadmodule "/usr/local/lib/ser/modules/auth_db.so" ># ># ----------------- setting module-specific parameters --------------- ># ># -- usrloc params -- ># >#modparam("usrloc", "db_mode", 0) ># ># Uncomment this if you want to use SQL database ># for persistent storage and comment the previous line >modparam("usrloc", "db_mode", 2) ># ># -- auth params -- ># Uncomment if you are using auth module ># >modparam("auth_db", "calculate_ha1", yes) ># ># If you set "calculate_ha1" parameter to yes (which true in this config), ># uncomment also the following parameter) ># >modparam("auth_db", "password_column", "password") ># ># >modparam("acc", "log_level", 1) >modparam("acc", "log_flag", 2) >modparam("acc", "log_missed_flag", 2) >modparam("acc", "log_fmt", "fimos") ># >#modparam("tm", "fr_inv_timer", 35) #INVITE timeout >#modparam("tm", "fr_timer", 30) #negative INVITE replay or no > #final reply for a request for ACK ># >modparam("voicemail", "db_url", "sql://ser:heslo@localhost/ser") ># >#modparam("acc", "db_url", "sql://ser:heslo@localhost/ser") >#modparam("acc", "db_flag", 2) >#modparam("acc", "db_missed_flag", 2) ># ># ------------------------- request routing logic ------------------- ># ># main routing logic ># >alias=10.10.10.49 #sip server IP address >alias=jiffypop #sip server name >alias=mydomain.com #sip domain/realm >alias=jiffypop.mydomain.com #sip server FQDN ># >route{ > log(1,"entering main route"); > #prevent strangers from claiming to belong to our domain; > #if sender claims to be in our domain in From header field, > #better authenticate him > # code not inserted yet :) > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if (len_gt( max_len )) { > sl_send_reply("513", "Message too big"); > break; > }; > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > record_route(); > # loose-route processing > if (loose_route()) { > t_relay(); > break; > }; > > setflag(2); #set flag for accounting > > # if the request is for other domain use UsrLoc > # (in case it does not work, use the following command > # with proper names and addresses in it) > > if (uri==myself) { > if (method=="REGISTER") { > # digest authentication > log(1,"request for registration"); > if (!www_authorize("mydomain.com", "subscriber")) { > www_challenge("mydomain.com", "0"); > break; > }; > save("location"); > break; > }; > >/* ********** Dial out to PSTN logic ************* */ > > #forward numerical 7 digit requests to gateway > if(uri=~"^sip:[0-9]{7}@(mydomain\.com|10\.10\.10\.49)"){ ># append_hf("Remote-Party-ID:<sip:6508466600@mydomain.com>;party=calling;i d-type=subscriber;privacy=off;screen=no;\r\n"); > rewritehostport("10.10.10.5:5060"); > log(1,"7 digit expression match"); > route(2); > break; > > }; > # strip 650 and forward to GW is user dials 650 before phone no. > if(uri=~"^sip:650[0-9]{7}@(mydomain\.com|10\.10\.10\.49)"){ > strip(3); > rewritehostport("10.10.10.5:5060"); > log(1,"650 area code dialed, 650 stripped"); > route(2); > break; > > }; > #forward numerical 10 digit requests to gateway, append a 1 first > if(uri=~"^sip:[0-9]{10}@(mydomain\.com|10\.10\.10\.49)"){ > prefix("1"); > rewritehostport("10.10.10.5:5060"); > log(1,"10 digit expression match, prefix 1"); > route(2); > break; > }; > #forward numerical 11 digit requests that start with a 1 to GW > if(uri=~"^sip:1[0-9]{10}@(mydomain\.com|10\.10\.10\.49)"){ > rewritehostport("10.10.10.5:5060"); > log(1,"10 digit exp match w/leading 1"); > route(2); > break; > }; > #forward international N digit requests to gateway > if(uri=~"^sip:011[0-9]+@(mydomain\.com|10\.10\.10\.49)"){ > rewritehostport("10.10.10.5:5060"); > log(1,"international expression match"); > route(2); > break; > }; > >/* ********** VOICEMAIL logic ************* */ > > if (uri=~"^sip:voicemail\+@"){ > t_newtran(); > t_reply("100", "Trying -- just a second"); > if(!vm("/tmp/am_fifo","announcement")){ > t_reply("500", "SEMS error"); > }; > log(1,"sip:voicemail uri match"); > break; > }; >/* ****** Find Aliases and Locations of users ********* */ > ># It is very important to lookup "aliases" before looking up "locations" > > if(!lookup("aliases")){ > log(1,"Couldn't find any matching alias"); > sl_send_reply("404", "User does not exist"); > break; > }; > > if(!lookup("location")) { > log(1,"unable to locate user"); > route(3); > break; > }; > > }; > > > # forward to current uri now; use stateful forwarding; that > # works reliably even if we forward from TCP to UDP > t_on_failure("1"); > if (!t_relay()) { > sl_reply_error(); > }; > log(1,"eof"); >} > >route[2]{ > log(1,"route[2]:SIP-to-PSTN call routed"); > if(!t_relay()){ > sl_reply_error(); > }; >} > >route[3]{ > log(1,"route[3]: voicemail processing"); > if(method=="INVITE" || method=="ACK"){ > log(1,"1st if entered in route[3] *vm*"); > t_newtran(); > t_reply("100","Trying -- just a second"); > if(!vm("/tmp/am_fifo","voicemail")){ # "announcement" was replaced with "voicemail" > log(1,"vm module called and failed"); > t_reply("500", "SEMS error"); > }; > break; > }; > log(1,"end of route[3], 1st if check not entered"); >} > >failure_route[1]{ > log(1,"failure_route[1]:jump to vm processing"); > route(3); ># break; >} > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/ _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

2 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2003