Like I said, I used: exclude_modules="" modules --no errors, ser is
running but I don't see any mysql.so under modules, I thought that it
wouldn't matter since the mysql's binaries are already installed but
when I tried to include the very first line: loadmodule
"/usr/local/lib/ser/modules/mysql.so" then the configuration complains.
If I am missing something please let me know.
-----Original Message-----
From: Jan Janak [mailto:jan@iptel.org]
Sent: Wednesday, July 02, 2003 11:50 AM
To: Marcelo Schmidt
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] Mysql.so
Did the module compile without errors ? Did you run make install ?
Jan.
On 02-07 11:49, Marcelo Schmidt wrote:
> Yes, I have mysql client libraries installed. I am compiling from the
> sources and under /usr/local/lib/ser/modules is not showing up.
>
> Thanks.
>
> -----Original Message-----
> From: Jan Janak [mailto:jan@iptel.org]
> Sent: Wednesday, July 02, 2003 11:42 AM
> To: Marcelo Schmidt
> Cc: serusers(a)lists.iptel.org
> Subject: Re: [Serusers] Mysql.so
>
>
> Do you have mysql client libraries installed ? If you compile it from
> sources then the modules are in /usr/local/lib/ser/modules
>
> The default configuration file that is included in the distribution
> works with mysql, you just need to uncomment couple of lines in the
> file, the comments in the file tell you which lines to uncomment.
>
> Jan.
>
> On 02-07 11:33, Marcelo Schmidt wrote:
> > I can't get mysql.so under /usr/local/lib/ser/modules. How do you
> > build ser to get it right? My last try: make exclude_modules=""
> > modules
> >
> > Then the ser.cfg, could you provide me with one that it is including
> > all the necessary lines for using mysql?
> >
> > Thanks!
> >
> > -----Original Message-----
> > From: Jan Janak [mailto:jan@iptel.org]
> > Sent: Wednesday, July 02, 2003 11:13 AM
> > To: serusers(a)lists.iptel.org
> > Subject: Re: [Serusers] Mysql.so
> >
> >
> > modprobe "/usr/lib/ser/modules/mysql.so" or wherever is your module
> > installed. Working ser.cfg is included in the distribution of ser.
> >
> > Jan.
> >
> > On 02-07 11:09, Marcelo Schmidt wrote:
> > > Could you please point me how to include the mysql.so, I have
> > > installed 8.11 and mysql and also could you attach a working
> > > ser.cfg
>
> > > for mysql?
> > >
> > > Thanks,
> > > Marcelo.
> > >
> > > _______________________________________________
> > > Serusers mailing list
> > > serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
I'm having a small problem with a phone registration at a customer's
site. The majority of the phones register with no problem. The ones
that register correctly are Snom 200s, while the one I'm having problems
with is a Cisco. The registration request I see in my ngrep log from
the Cisco is:
REGISTER sip:SIP000BBEF2DF4C SIP/2.0..Via: SIP/2.0/UDP
172.21.20.200:5060.. From: sip:Line1@SIP000BBEF2DF4C..To:
sip:Line1@SIP000BBEF2DF4C..Call-ID:
000bbef2-df4c000c-223725a3-671cea85@172.21.20.200..CSeq: 101
REGISTER..Contact: <sip:Line1@172.21.20.200:5060>..Expires:
3600..Content-Length: 0....
While a Snom's request looks like this:
REGISTER sip:172.21.30.50 SIP/2.0..Via: SIP/2.0/UDP
172.21.20.36:5060;branch=z9hG4bK-zqvjm58v73fd;rport..Max-Forwards:
70..From: "IC36" <sip:IC36@172.21.30.50>;tag=26kqteejq4..To: "IC36"
<sip:IC36@172.21.30.50>..Call-ID:
3ef763ebf18c-ga88nc7dymyf@172.21.20.36..User-Agent:
snom200-1.15r..CSeq: 1581 REGISTER..Route:
<sip:172.21.30.50>..Contact:
<sip:IC36@172.21.20.36:5060;line=1>..Expires: 600..Content-Length:
0....
There's never a response of any kind from the SER proxy to the Cisco's
request. I noticed that the Cisco doesn't enlcose the From or To
addresses in <>'s, while the Snom and other SIP devices at the location
do, but I'm not sure that's the problem.
Ideas?
--
Jamin W. Collins
This is the typical unix way of doing things: you string together lots
of very specific tools to accomplish larger tasks. -- Vineet Kumar
Yes, I have mysql client libraries installed. I am compiling from the
sources and under /usr/local/lib/ser/modules is not showing up.
Thanks.
-----Original Message-----
From: Jan Janak [mailto:jan@iptel.org]
Sent: Wednesday, July 02, 2003 11:42 AM
To: Marcelo Schmidt
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] Mysql.so
Do you have mysql client libraries installed ? If you compile it from
sources then the modules are in /usr/local/lib/ser/modules
The default configuration file that is included in the distribution
works with mysql, you just need to uncomment couple of lines in the
file, the comments in the file tell you which lines to uncomment.
Jan.
On 02-07 11:33, Marcelo Schmidt wrote:
> I can't get mysql.so under /usr/local/lib/ser/modules. How do you
> build ser to get it right? My last try: make exclude_modules=""
> modules
>
> Then the ser.cfg, could you provide me with one that it is including
> all the necessary lines for using mysql?
>
> Thanks!
>
> -----Original Message-----
> From: Jan Janak [mailto:jan@iptel.org]
> Sent: Wednesday, July 02, 2003 11:13 AM
> To: serusers(a)lists.iptel.org
> Subject: Re: [Serusers] Mysql.so
>
>
> modprobe "/usr/lib/ser/modules/mysql.so" or wherever is your module
> installed. Working ser.cfg is included in the distribution of ser.
>
> Jan.
>
> On 02-07 11:09, Marcelo Schmidt wrote:
> > Could you please point me how to include the mysql.so, I have
> > installed 8.11 and mysql and also could you attach a working ser.cfg
> > for mysql?
> >
> > Thanks,
> > Marcelo.
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Do you have mysql client libraries installed ? If you compile it from
sources then the modules are in /usr/local/lib/ser/modules
The default configuration file that is included in the distribution
works with mysql, you just need to uncomment couple of lines in the
file, the comments in the file tell you which lines to uncomment.
Jan.
On 02-07 11:33, Marcelo Schmidt wrote:
> I can't get mysql.so under /usr/local/lib/ser/modules. How do you build
> ser to get it right? My last try: make exclude_modules="" modules
>
> Then the ser.cfg, could you provide me with one that it is including all
> the necessary lines for using mysql?
>
> Thanks!
>
> -----Original Message-----
> From: Jan Janak [mailto:jan@iptel.org]
> Sent: Wednesday, July 02, 2003 11:13 AM
> To: serusers(a)lists.iptel.org
> Subject: Re: [Serusers] Mysql.so
>
>
> modprobe "/usr/lib/ser/modules/mysql.so" or wherever is your module
> installed. Working ser.cfg is included in the distribution of ser.
>
> Jan.
>
> On 02-07 11:09, Marcelo Schmidt wrote:
> > Could you please point me how to include the mysql.so, I have
> > installed 8.11 and mysql and also could you attach a working ser.cfg
> > for mysql?
> >
> > Thanks,
> > Marcelo.
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Could you please point me how to include the mysql.so, I have installed
8.11 and mysql and also could you attach a working ser.cfg for mysql?
Thanks,
Marcelo.
Hello,
your problem is clearly caused by an improper version of Ser's vm module.
I would suggest that you download the last CVS version of this module and
try it again.
Module's download address:
http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/modules/vm/vm.tar.g
z?tarball=1
Then, unpack this package in Ser's module directory (ser/modules) and
recompile Ser.
You should also download the last CVS version of Sems.
If you updates your Sems version, should you always update Ser also.
Regards,
Raphael.
----- Original Message -----
From: "Claudio Thorell dos Santos" <cthorell(a)telenova.net>
To: "Raphael Coeffic" <raphael.coeffic(a)iptel.org>
Sent: Wednesday, July 02, 2003 3:46 PM
Subject: Re: [Serusers] Question about SEMS voicemail
> Hello Raphael,
>
> I have collected the debugs you requested me. On the the debus I have made
2
> calls, on both of them I got a busy tone on the Ata and a message 400
> session description failed.
>
> Please, let me know if you find out what the problem is.
>
> Thanks and regards,
> Claudio
>
> ----- Original Message -----
> From: "Raphael Coeffic" <raphael.coeffic(a)iptel.org>
> To: "Claudio Thorell dos Santos" <cthorell(a)telenova.net>
> Cc: <serusers(a)lists.iptel.org>
> Sent: Wednesday, June 25, 2003 7:46 AM
> Subject: Fw: [Serusers] Question about SEMS voicemail
>
>
> > Hello,
> >
> > i forgot to answer some of the questions:
> >
> > >Any ideas why is this happening?
> > I think it is a compatibility problem between Ser & Sems FIFO interface.
I
> > would be able to tell you more if i see the ans_machine's debug logs.
> Start
> > it with '-D 3 -E' and send me the complete output. Do the same with Ser
> (in
> > ser.cfg: debug=7, fork=no, log_stderror=yes).
> >
> > >I also would like to know what codecs does this voicemail supports?
> > Mu-Law, A-Law, GSM. Futher codecs are planned.
> > If you want to add codec support on your own, Sems has an easy-to-use
> > plug-in interface/Sdk & for this purpose. Just have a look at the
> existing
> > ones in the plug-in directory (gsm & wav). If you have any question
> > regarding the implementation/integration of new codecs, feel free to
mail
> me
> > personally (raphael.coeffic(a)iptel.org).
> >
> > >Is there a way to retrieve the messages by phone or just by email?
> > At the moment, just by email. There are some plans to develop some
> web-based
> > solution. A phone-based solution would suppose to implement an IVR,
which
> is
> > not yet on the roadmap, as we think that it belongs to the past. If you
> need
> > this for commercial use, contact Jiri Kuthan (jiri(a)iptel.org) for more
> > information.
> >
> > Regards,
> > Raphael.
> >
>
I'm playing with Ser in a lab environment and have it running as a bare
bones implementation. Can someone refer me to an implementation guide
that might provide an uninformed person some hints on installing and using
important plugins, typical configs, etc?
I'd like to interface with one/two representative commerical IP phones,
maybe a Cisco router voice card, possibly an open source voice mail system,
and a few other items to increase my knowledge/exerience with voice-over
and the system. (Lots of experience in the POTS and protocol analysis areas
but none with Ser, plugins, or voice-over.) Any suggestions for
hardware/software to try, key web sites, etc, would be greatly appreciated.
Rich
Hi,all,
Has anyone connect KPhone located behind NAT
successfully to SER? Thanks for help.
kaiduan
______________________________________________________________________
Post your free ad now! http://personals.yahoo.ca
Hi, jiri,
Would you tell me which module implements ENUM service
in SER 0.8.10? I have MyDNS to support NAPTR query. It
is better if you would point out the source file name.
Thanks for help.
kaiduan
______________________________________________________________________
Post your free ad now! http://personals.yahoo.ca
Actually it happened to be a build error:
SunOS www-test101 5.8 Generic_108528-20 sun4u sparc SUNW,Ultra-5_10
cd utils/gen_ha1; /usr/local/bin/make all
make[1]: Entering directory
`/export/home/mschmidt/build-dir/sip_router/utils/gen_ha1'
gcc -o gen_ha1 gen_ha1.o calc.o ../../md5.o
../../md5.o: In function `MD5Init':
/export/home/mschmidt/build-dir/sip_router/md5.c:113: undefined
reference to `_mcount'
../../md5.o: In function `MD5Update':
/export/home/mschmidt/build-dir/sip_router/md5.c:131: undefined
reference to `_mcount'
../../md5.o: In function `MD5Final':
/export/home/mschmidt/build-dir/sip_router/md5.c:173: undefined
reference to `_mcount'
../../md5.o: In function `MD5Transform':
/export/home/mschmidt/build-dir/sip_router/md5.c:202: undefined
reference to `_mcount'
../../md5.o: In function `Encode':
/export/home/mschmidt/build-dir/sip_router/md5.c:296: undefined
reference to `_mcount'
../../md5.o:/export/home/mschmidt/build-dir/sip_router/md5.c:314: more
undefined references to `_mcount' follow
collect2: ld returned 1 exit status
make[1]: *** [gen_ha1] Error 1
make[1]: Leaving directory
`/export/home/mschmidt/build-dir/sip_router/utils/gen_ha1'
make: *** [utils/gen_ha1/gen_ha1] Error 2
> make --version
GNU Make 3.80
Copyright (C) 2002 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is
NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE.
> ld --version
GNU ld 2.11.2
Copyright 2001 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms
of the GNU General Public License. This program has absolutely no
warranty.
Supported emulations:
elf32_sparc
elf64_sparc
-----Original Message-----
From: Jiri Kuthan [mailto:jiri@iptel.org]
Sent: Monday, June 30, 2003 2:35 PM
To: Marcelo Schmidt; serusers(a)lists.iptel.org
Subject: RE: [Serusers] Problem with fifo cmds.
At 11:29 PM 6/30/2003, Marcelo Schmidt wrote:
>This 8.11 version it doesn't run in solaris at all.
Can you be please more specific?
Thank you,
-jiri
>I am running out of
>time here so I guess I will move to Linux... what Linux (kernel) you're
>using with 8.10/8.11?
jiri@fox:~$ uname -a
Linux fox 2.4.20-xfs #1 SMP Fri Mar 28 17:04:13 CET 2003 i686 GNU/Linux
