Hi everybody,
I am unable to login after creating user using serctl when I type the
path and try to login it is not showing any error.let me know to do
any changes to be done.
Regards,
nihar.
_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!
Ok I finally got the right rtpproxy running and SER is seeing it and is
enabling the support for rtpproxy. I just placed a call from my computer
using xlite to another computer on a different network behind a nat. We are
still having the problem of not being able to hear each other.
Is there any configuring I need to do on the server side? Would it help if I
pasted the contents of my ser.cfg file?
Thank you.
Sher
-----Original Message-----
From: Bruno Lopes F. Cabral [mailto:bruno@openline.com.br]
Sent: Monday, November 15, 2004 4:26 PM
To: S Shah
Subject: Re: [Serusers] xlite voice session
/usr/sbin is fine, but the rtpproxy.tar which is linked
from www.voip-info.org site is for older version of
SER. SER 0.8.14 needs the CVS rtpproxy (I made that mistake)
S Shah wrote:
> Thanks anyway Bruno. I actually found the rtpproxy at portaone's site and
> have built it. Do you know which directory the executable should reside
in?
Thanks anyway Bruno. I found it at portaone's site. Here's the link if
anyone else needs it: http://www.portaone.com/~sobomax/rtpproxy.tar
I downloaded the rtpproxy from portaone and created the executable from the
makefile provided. How do I have SER utilize the rtpproxy now? When I run
SER I get the following messages:
1(32703) ERROR: send_rtpp_command: can't read reply from a RTP proxy
1(32703) WARNING: rtpp_test: can't get version of the RTP proxy
1(32703) WARNING: rtpp_test: support for RTP proxyhas been disabled
temporarily
Thank you
-----Original Message-----
From: Bruno Lopes F. Cabral [mailto:bruno@openline.com.br]
Sent: Monday, November 15, 2004 3:06 PM
To: S Shah
Subject: Re: [Serusers] xlite voice session
Hi
berlios problably have a tar on rtpproxy project page,
but I don't have an URL handy to give to you, sorry
Cheers
!3runo
S Shah wrote:
> Hi Bruno. I tried to log in to the cvs server but I'm getting "no such
user"
> from the cvs login script when I use "anonymous" as the user name. Is
there
> a tar file that I can grab from an ftp site?
Hi. Has anyone compiled CPLed? I have downloaded the source, extracted it
and I'm using Eclipse in windows. When I try to compile it cannot find the
CPL packages for example, package CPLEd.tree;
If anyone knows what I've done wrong please reply
Graham Forsyth
--
The University of Stirling is a university established in Scotland by
charter at Stirling, FK9 4LA. Privileged/Confidential Information may
be contained in this message. If you are not the addressee indicated
in this message (or responsible for delivery of the message to such
person), you may not disclose, copy or deliver this message to anyone
and any action taken or omitted to be taken in reliance on it, is
prohibited and may be unlawful. In such case, you should destroy this
message and kindly notify the sender by reply email. Please advise
immediately if you or your employer do not consent to Internet email
for messages of this kind.
I'm having a problem making the mysql module for ser. When I type make
modules everything compiles fine except for the mysql.so, it returns an
error saying:
" /usr/bin/ld: cannot find -lz
collect2: ld returned 1 exit status"
If I remove the -lz it makes but can't be loaded correctly by ser. Any
help would be greatly appreciated.
Below is the makefile I'm using:
# $Id: Makefile,v 1.22 2003/09/16 18:55:07 janakj Exp $
#
# WARNING: do not run this directly, it should be run by the master
Makefile
include ../../Makefile.defs
auto_gen=
NAME=mysql.so
# mysql.h locations (freebsd,openbsd solaris)
DEFS +=-I$(LOCALBASE)/include -I$(LOCALBASE)/include/mysql \
-I$(LOCALBASE)/mysql/include -I/usr/pkg/include
# libmysqlclient locations on RH/Suse, Solaris /OpenBSD, FreeBSD
# (Debian does the right thing and puts it in /usr/lib)
LIBS=-L/usr/lib/mysql -L$(LOCALBASE)/lib -L$(LOCALBASE)/lib/mysql \
-L$(LOCALBASE)/mysql/lib/mysql/ -L/usr/pkg/lib/mysql \
-L$(LOCALBASE)/mysql/lib \
-lmysqlclient -lz
include ../../Makefile.modules
Thanks for any help,
Zack Medlin
Hi Bruno. I tried to log in to the cvs server but I'm getting "no such user"
from the cvs login script when I use "anonymous" as the user name. Is there
a tar file that I can grab from an ftp site?
Thanks
Sher
-----Original Message-----
From: Bruno Lopes F. Cabral [mailto:bruno@openline.com.br]
Sent: Monday, November 15, 2004 2:18 PM
To: S Shah
Subject: Re: [Serusers] xlite voice session
Hi
get rtpproxy from CVS and set it up and it will work.
I'm doing the same way you are right now
a couple of days ago I post a message on the list
with the CVS command to download rtpproxy and the
URL of SER config to use it with nathelper
Hope this helps
!3runo
S Shah wrote:
> The remote computer does not have a public ip address. That computer is
> behind a netgear router. The router itself has the public ip address. My
> computer is on a lan as well. I'm behind linksys router. This router has a
> separate public ip address. My SER server is located in a separate
location
> from the two computers. The SER server has a public ip address.
>
> I've configured my ser.cfg file to use nathelper but I'm not using
> mediaproxy or rtpproxy. I agree that the RTP packets are getting blocked
> somewhere along the way. I'm guessing I can rectify the problem by using a
> mediaproxy or a rtpproxy. I'm still new to SER and sip so I'm not sure how
> to install and setup the mediaproxy and the rtpproxy.
>
> Thanks for your response Bruno.
Hi,everyone
why i cannot use "serctl moni"?I have run the command :export
SIP_DOMAIN="voipv6.edu.cn".
And the error is :
# serctl moni
Error opening ser's FIFO /tmp/ser_fifo
Make sure you have line fifo=/tmp/ser_fifo in your config
And I did have the line :
check_via=yes # (cmd. line: -v)
dns=yes # (cmd. line: -r)
rev_dns=yes # (cmd. line: -R)
port=5060
#children=4
fifo="/tmp/ser_fifo"
what should i do to solve the problem?
These are some informations related to my setting and problem:
1、operating system:Linux 7.0
2、SER distribution: ser-0.8.14_linux_i386.tar.gz
_________________________________________________________________
免费下载 MSN Explorer: http://explorer.msn.com/lccn/
The remote computer does not have a public ip address. That computer is
behind a netgear router. The router itself has the public ip address. My
computer is on a lan as well. I'm behind linksys router. This router has a
separate public ip address. My SER server is located in a separate location
from the two computers. The SER server has a public ip address.
I've configured my ser.cfg file to use nathelper but I'm not using
mediaproxy or rtpproxy. I agree that the RTP packets are getting blocked
somewhere along the way. I'm guessing I can rectify the problem by using a
mediaproxy or a rtpproxy. I'm still new to SER and sip so I'm not sure how
to install and setup the mediaproxy and the rtpproxy.
Thanks for your response Bruno.
===================
-----Original Message-----
From: Bruno Lopes F. Cabral [mailto:bruno@openline.com.br]
Sent: Monday, November 15, 2004 11:34 AM
To: S Shah
Subject: Re: [Serusers] xlite voice session
Do the remote computer have a public IP address?
if not, are you using some sort of NAT between
your SIP client and the internet/to your SER server?
your SER server is using mediaproxy or rtpproxy?
usually lack of hearing between one peer or the
other means RTP packets are getting blocked somewhere
S Shah wrote:
> I finally got xlite to somewhat work with my SER server. On my lan, I'm
> able to get a voice session going between two xlite user agents running
> on two different computers. I then tried to gt a voice conversation on
> an xlite useragent running on a computer outside of the local network. I
> was able to establish a connection w/ the outside computer, but neither
> of us could hear each other.
> Does anyone have a clue what could be the problem here?
Hi list,
I'm new with SER and the first problem I got was with NAT.
Does anybody could help me sending a example of this configuration?
Vitor Brasileiro.
I finally got xlite to somewhat work with my SER server. On my lan, I'm able
to get a voice session going between two xlite user agents running on two
different computers. I then tried to gt a voice conversation on an xlite
useragent running on a computer outside of the local network. I was able to
establish a connection w/ the outside computer, but neither of us could hear
each other.
Does anyone have a clue what could be the problem here?
Thanks in advance.
Sher
