sr-users December 2004

sr-users@lists.kamailio.org

184 participants
400 discussions

by support

Hi, I have installed the latest rtpproxy and run it with ser-0.8-14. I have also include nathelper modules. When I try to register a siprua gateway with SER, the IP is still 192.168.1.xx. It cannot be translated to NAT public IP. Why is that so? Thanks. Thomas Appendix: my ser.cfg -------------------------------------------------- # # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" alias=mydomain.dyndns.org # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; #inserted by klaus if (method=="INVITE") { record_route(); force_rtp_proxy(); /* set up reply processing */ t_on_reply("1"); }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } #inserted by klaus # all incoming replies for t_onrepli-ed transactions enter here onreply_route[1] { if (status=~"[12][0-9][0-9]") force_rtp_proxy(); }

19 years, 8 months

[Serusers] serweb php scripts could not open ser_fifo for writing ...

by alhezmi＠yahoo.de

Hallo all, I've just installed the serweb interface in a running ser environment. In spite of changing the access mode of the ser_fifo (stored in /tmp) to allow php scripts for reading and writing, php scripts send the following error message to my web browser "sorry -- cannot open write fifo". Since the ser_fifo file location is under the /tmp directory, I didn't change the value of the fifo_server parameter in the config.php script. The question is: is the value path of the ser_fifo relative to the running script (functions.php) or absolute? Best regard, ===== Al-Hezmi, Adel ---------------------------------------------------------------------------------- Home page: www.cs.tu-berlin.de/~adelhazm ___________________________________________________________ Gesendet von Yahoo! Mail - Jetzt mit 250MB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de

19 years, 8 months

[Serusers] outbound proxy defintion

by support

Hi, My understanding on SIP outbound proxy server is that it can solve the NATed clients problem, while typically proxy server cannot do this. Do you agree? However, can outbound proxy server cannot solve the firewall problem? I think it cannot do that. Do you agree? Thomas

19 years, 8 months

[Serusers] monitoring tool

by Raymond Chen

Dear all, What monitoring tools to monitor and restart SER when it stops? We tried daemontools but it only monitor process in the foreground and since SER forks as daemon we are not able to get it to work. So anyone has another tool to perform the task please let us know Ray

19 years, 8 months

[Serusers] SIP-T Support

by Danny Moghnie

Does SER support SIP-T Danny Moghnie, iVoiceLynx

19 years, 8 months

[Serusers] Question about SER and Cisco 5300

by Chan Victor

Hello All, I'm new user of SER. I'm using ser 0.8.14 release and a Cisco 5300 gateway. I would like make call to PSTN from SIP endpoint via SER. What configuration is needed for 5300 gateway in order to make it work? Thanks. Victor _________________________________________________________________ MSN Tool Bar 幫你刪除惱人的廣告 ! http://toolbar.msn.com.hk

19 years, 8 months

[Serusers] SER without STUN server

by support

Hi, I have heard someone say about rtp proxy that allows ser work without installing STUN server. Can anyone tell me how to configure it? Do you I need to recompile the code and enable this function? It would be better if you can post a ser.cfg example. Thank you. Thomas

19 years, 8 months

[Serusers] Error in Ser.cfg - Auth.db

by Felipe Martins

Hi everybody, When I uncomment the above two lines and try to run my ser server, it doesn't run. loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" I've looked for this .so(s) and i've found them at the /usr/local/lib/ser/modules/ directory, the same as my ser.cfg configuration shows me. The same happens when I try to comment the line: modparam("usrloc", "db_mode", 0) and uncomment the line: modparam("usrloc", "db_mode", 2) The same happens, ser server doesn't run. What am I doing wrong ? The files that ser asks for exists exactly at the path of the configuration file (ser.cfg). -- Felipe Martins Linux System Administrator Tep Solution Provider Mundivox Communications Rua Lauro Muller, 116/Sala 505 RJ - Brasil - 22290-906 Tel.: 55 21 3820-8839 Fax.: 55 21 3820-8844

19 years, 8 months

[Serusers] how to forward a request to upper proxy???

by szj

Hi: I have one question to get help from you! If UA call a user by my SER Proxy, and SER can't find the called user in itself location, it will return 404"not found". But this is not What I want. What I want is to let SER forward the request except REGISTER to upper proxy?? How should I configure SER to get the goal ??? Thanks a lot for your help! Best Regards Sun Zongjun

19 years, 8 months

[Serusers] ser fork no as daemon

by Raymond Chen

Dear all, Does anyone know how to configure SER forks but not as daemon? Saw some posting to run ser as -D, we tried that but it didn't work. Any idea? Ray

19 years, 8 months

← Newer
1
...
20
21
22
23
24
25
26
...
40
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users December 2004