sr-users December 2004

sr-users@lists.kamailio.org

184 participants
400 discussions

RE: [Serusers] CDR Issues
by Matt Schulte 30 Dec '04

30 Dec '04

> I don't like the idea of having 2 or 3 programs in my path. Neither do I :-) Asterisk is a stateful *ahem* softswitch/proxy, that always generates a BYE. It communicates directly with whatever it connects to, unless you redirect of course. I wouldn't use Asterisk for this purpose of course for many reasons either, I was just making a point :-) Matt -----Original Message----- From: Erik Versaevel [mailto:erik@infopact.nl] Sent: Thursday, December 30, 2004 9:07 AM To: Matt Schulte Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] CDR Issues Mediaproxy suffers the same problem, just put the call on hold (otherwise it would be idle and terminate after 60 seconds) and pull the plug, i'm not sure if the same goes for asterisk, but I don't like the idea of having 2 or 3 programs in my path. Kind regards, E. Versaevel Matt Schulte wrote: >Yes this is a common problem, you would need a stateful RTP session. >ie: What Asterisk does, I've found no way to do this without some kind >of media proxy. You can however log incomplete calls and take >countermeasures against them, what those would be of course is the >question. > >-----Original Message----- >From: Erik Versaevel [mailto:erik@infopact.nl] >Sent: Thursday, December 30, 2004 8:32 AM >To: serusers(a)lists.iptel.org >Subject: [Serusers] CDR Issues > > >OK, i've run into a problem with the CDR Creation. > >If you have 2 users who call each other, talk a while and then instead >of hanging up decide to pull the plugs from their phones (or terminitate > >their application), no complete CDR is generated, the INVITE and ACK >are > >logged, but since no one realy hangs up there won't be a BYE record, so >no CDR end/total time and no billable time. >Use the / a rtpproxy you would say, to bad it suffers from the same >problem, if both partes put the call on hold and pull the plug the call >keeps existing and once again an incomplete CDR. > >Has anyone ever suffered the same problem? And what is the most >reliable > >way to generate CDRs? > >Kind regards, > >E. Versaevel > > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers > > >

1 0

RE: [Serusers] CDR Issues
by Matt Schulte 30 Dec '04

30 Dec '04

Yes this is a common problem, you would need a stateful RTP session. ie: What Asterisk does, I've found no way to do this without some kind of media proxy. You can however log incomplete calls and take countermeasures against them, what those would be of course is the question. -----Original Message----- From: Erik Versaevel [mailto:erik@infopact.nl] Sent: Thursday, December 30, 2004 8:32 AM To: serusers(a)lists.iptel.org Subject: [Serusers] CDR Issues OK, i've run into a problem with the CDR Creation. If you have 2 users who call each other, talk a while and then instead of hanging up decide to pull the plugs from their phones (or terminitate their application), no complete CDR is generated, the INVITE and ACK are logged, but since no one realy hangs up there won't be a BYE record, so no CDR end/total time and no billable time. Use the / a rtpproxy you would say, to bad it suffers from the same problem, if both partes put the call on hold and pull the plug the call keeps existing and once again an incomplete CDR. Has anyone ever suffered the same problem? And what is the most reliable way to generate CDRs? Kind regards, E. Versaevel _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

2 1

[Serusers] CDR Issues
by Erik Versaevel 30 Dec '04

30 Dec '04

OK, i've run into a problem with the CDR Creation. If you have 2 users who call each other, talk a while and then instead of hanging up decide to pull the plugs from their phones (or terminitate their application), no complete CDR is generated, the INVITE and ACK are logged, but since no one realy hangs up there won't be a BYE record, so no CDR end/total time and no billable time. Use the / a rtpproxy you would say, to bad it suffers from the same problem, if both partes put the call on hold and pull the plug the call keeps existing and once again an incomplete CDR. Has anyone ever suffered the same problem? And what is the most reliable way to generate CDRs? Kind regards, E. Versaevel

1 0

RE: [Serusers] Please help me identify
by Matt Schulte 30 Dec '04

30 Dec '04

We are a PSTN to VOIP provider, we've always made the username the phone number in our case. If they had more than one number then we would use our own alias script that did a table lookup. Ser has a builtin alias database that's simple and based off of the usrloc database. That may be up your alley. -----Original Message----- From: Abid A. Mirza [mailto:amirza_nyc@yahoo.com] Sent: Thursday, December 30, 2004 4:57 AM To: serusers(a)lists.iptel.org Subject: [Serusers] Please help me identify Thanks for your reply, but my question Location DB only contain Usename in the format of User(a)mydomain.com, how do I lookup the numerical number that is assigned to user(a)mydomain.com Let say User@mydoamin is assigned 747122 to him, location DB does not contain these alias at all. Please reply with solution? -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 28/12/04 _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

RE: [Serusers] I am newcome , I can not login my sip server that I build?
by Matt Schulte 30 Dec '04

30 Dec '04

You'll need to be a little more specific. I understand you may not know a lot about SER (or SIP for that matter), but what do you mean you can't login? Are you trying to register? Are you trying to add users to the usrloc (user location) database? It sounds like it's not even running? Please post your ser.cfg .. You can run 'ser -dddd' to get debug info, it may log to /var/log/messages or to the screen you run it on. If you see something like "signal 15" then it's most likely a config file problem or a failure when it tries to load. Matt -----Original Message----- From: Zhaomin [mailto:zhaomin@kingdream.com] Sent: Wednesday, December 29, 2004 7:23 PM To: serusers(a)lists.iptel.org Subject: [Serusers] I am newcome ,I can not login my sip server that I build? I am newcome ,I can not login my sip server(ser0.8.14) that I build? I run the commamd serctl ping localhost echo me 400.Where is failt ?Anyones can help me

1 0

[Serusers] Ser, Radius and unique Id problems
by Alessandro 30 Dec '04

30 Dec '04

Hi all I have been experiment few problems with radius and ser runs together as follow: Problem number one: “unique_id” is not ever “unique_id” . Sometimes I get the unique_id and the acct_session_id repeating. In consequence I can’t get call duration precisely. Problem number two: when I get a pstn call the “called_id” get place the “calling_id” when “called_id” hang-up. Problem number tree: how can I change the “accounting_stop_query = update” instruction by another one that uses “accounting_stop_query = insert” instruction. Thank for your help, attention and kindness Alessandro Pereira -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 28/12/2004

1 0

[Serusers] Problem Logging Serweb
by Abid A. Mirza 30 Dec '04

30 Dec '04

I had similar problem I followed the Tutorial and did Chmod 777 /tmp/ser_fifo http://www.aarnet.edu.au/events/conferences/2004/apan-questnet/sipworkshop/s er-install.html Hope this works -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 28/12/04

1 0

[Serusers] Please help me identify
by Abid A. Mirza 30 Dec '04

30 Dec '04

Thanks for your reply, but my question Location DB only contain Usename in the format of User(a)mydomain.com, how do I lookup the numerical number that is assigned to user(a)mydomain.com Let say User@mydoamin is assigned 747122 to him, location DB does not contain these alias at all. Please reply with solution? -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 28/12/04

1 0

[Serusers] RADIUS - This is what happen to me...
by O-Zone 30 Dec '04

30 Dec '04

0(16010) find_export: found <ul_update_ucontact> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(16010) DEBUG: init_mod: auth 0(16010) auth module - initializing 0(16010) find_export: found <sl_send_reply> in module sl_module [/usr/local/lib/ser/modules/sl.so] 0(16010) DEBUG: init_mod: auth_radius 0(16010) auth_radius - Initializing Segmentation fault root@cerberus:~# anyone can help me ? Oz -- ------ O-Zone ! www.zerozone.it

3 6

[Serusers] Ser dead+mediaproxy
by Bui Thai Thinh 30 Dec '04

30 Dec '04

Hi All. I have a problem with SER when i use mediaproxy. I install SER in a computer(Linux Fedora 2) with ip 192.168.1.37. System run properly. I install more mediaproxy into system SER because i want to solve problem NAT.I had configured my config file. I begin test system mediaproxy : I have 2 GranStream BT100: BT1 :192.168.1.33 Phone :111 BT2 :192.168.1.35 Phone :333 When i make a call from 333 to 111 then display following: [root@dhcppc4 root]# tail -f /var/log/messages Dec 30 11:59:55 dhcppc4 proxydispatcher[3292]: command delete 57d2c31487b829d9(a)192.168.1.33 info= Dec 30 11:59:55 dhcppc4 proxydispatcher[3292]: command execution time: 0.77 ms Dec 30 11:59:55 dhcppc4 proxydispatcher[3292]: command request 57d2c31487b829d9(a)192.168.1.33 192.168.1.33:5004:audio 192.168.1.33 192.168.1.37 local 192.168.1.35 remote Grandstream=20BT100=201.0.5.16 info=from:111@192.168.1.37:5060,to:333@192.168.1.37:5060,fromtag:41cbda14a0e4af53,totag: Dec 30 11:59:55 dhcppc4 proxydispatcher[3292]: domain 192.168.1.37 doesn't define any mediaproxy. Dec 30 11:59:55 dhcppc4 proxydispatcher[3292]: will use default mediaproxy for this call. Dec 30 11:59:55 dhcppc4 mediaproxy[3296]: command request 57d2c31487b829d9(a)192.168.1.33 192.168.1.33:5004:audio 192.168.1.33 192.168.1.37 local 192.168.1.35 remote Grandstream=20BT100=201.0.5.16 info=from:111@192.168.1.37:5060,to:333@192.168.1.37:5060,fromtag:41cbda14a0e4af53,totag:,dispatcher Dec 30 11:59:55 dhcppc4 mediaproxy[3296]: session 57d2c31487b829d9(a)192.168.1.33: started. listening on 192.168.1.37:35022 Dec 30 11:59:55 dhcppc4 mediaproxy[3296]: command execution time: 4.85 ms Dec 30 11:59:55 dhcppc4 proxydispatcher[3292]: forwarding to mediaproxy on /var/run/mediaproxy.sock: got: '192.168.1.37 35022' Dec 30 11:59:55 dhcppc4 proxydispatcher[3292]: command execution time: 246.63 ms Dec 30 12:00:17 dhcppc4 mediaproxy[3296]: command status Dec 30 12:00:17 dhcppc4 mediaproxy[3296]: command execution time: 0.48 ms Dec 30 12:00:55 dhcppc4 mediaproxy[3296]: session 57d2c31487b829d9(a)192.168.1.33: 0/0/0 packets, 0/0/0 bytes (caller/called/relayed) Dec 30 12:00:55 dhcppc4 mediaproxy[3296]: session 57d2c31487b829d9(a)192.168.1.33: ended (did timeout). I see no packets throught mediaproxy and Ser dead.And when i do statement ./sessions.py then display : Caller Via Called Status Duration Codec Type Traffic --------------------------------------------------------------------------------------- ?.?.?.?:? - 192.168.1.37:35022 - ?.?.?.?:? inactive 0'22" Unknown Audio 0/0/0 I don't know to solve it. Can anybody help me. Thanks a lot. __________________________________ Do you Yahoo!? Take Yahoo! Mail with you! Get it on your mobile phone. http://mobile.yahoo.com/maildemo

1 0

← Newer
1
2
3
4
5
6
7
...
40
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users December 2004