sr-users February 2004

sr-users@lists.kamailio.org

144 participants
382 discussions

[Serusers] Call Divert
by Alan Litster 20 Feb '04

20 Feb '04

Hi, Is it possible to setup call divert on no answer facility on SIP accounts, so that they ring serveral times on the SIP phones and then divert to another number? Could be a SIP or PSTN number and unique to that SIP account. Regards, Alan ------------------------------------------------------------------------------------------------------- This email, and any files transmitted with it, is copyright and may contain confidential information. The contents are intended for the use of the addressee(s) only. Unauthorized use may be unlawful. If you receive this email by mistake, please advise sender immediately. The views of the author may not necessarily constitute the views of Telco Electronics Limited. Nothing in this mail shall bind Telco Electronics Limited in any contract or obligation. Telco Electronics Limited 6-8 Oxford Court Brackley Northants NN13 7XY Tel 07000 701999 Fax 07000 701777

2 1

[Serusers] Question on acc-parameter "log_level"
by Franz Edler 20 Feb '04

20 Feb '04

Hi, I have successfully activated accounting to syslog. The "log_flag" parameter and action work fine. I can set the log_flag action with different flag-values into various parts of my config-file and depending on the log_flag-parameter, I get different set of transactions logged. But what is log_level parameter meant for? I could not verify any impact on the logs by setting log_level to different values. Thanks Franz

1 0

[Serusers] msn presence
by 郝明亮 20 Feb '04

20 Feb '04

Hi, Friend: Have you solved the MSN presence problem under iptel? If that, can you tell me how to do it? Best

1 0

[Serusers] help for presence server (PA) setup
by 郝明亮 20 Feb '04

20 Feb '04

I can not make PA module work right. Please help me to setup it. Our problem is when one of windows messenger user go offline then go online, his friends can not know his online status. the attachment is our ser.cfg file. Best Regards

1 0

[Serusers] Re: permissions module
by Eduard San Anselmo Mateu 20 Feb '04

20 Feb '04

Hi again, Jan. Well, at least it compiles without any problems now, but I can't start the service. The log I'm getting is: Feb 20 10:50:42 sistemas2 ser: set_mod_param_regex: parameter <deny_file> not found in module <permissions> Feb 20 10:50:42 sistemas2 ser: parse error (99,62-63): Can't set module parameter Feb 20 10:50:42 sistemas2 ser: parse error (99,63-64): parse error Feb 20 10:50:42 sistemas2 ser: parse error (99,63-64): Feb 20 10:50:42 sistemas2 ser: ERROR: bad config file (3 errors) In my config file, I have: modparam("permissions", "allow_file", "/etc/ser/register.allow"); modparam("permissions", "deny_file", "/etc/ser/register.deny"); Eduard San Anselmo

2 1

[Serusers] ser and Cisco Call Manager 4.0
by Gerhard Zweimueller 20 Feb '04

20 Feb '04

Hi all, the latest release of Cisco Call Manager is Version 4.0 and it is supposed to support SIP: http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_data_sheet091… Has anyone already tried whether Cisco's implementation on Call Manager is compatible with the Sip Express Router? I want to connect Call Manager controlled in-house networks to a ser-based system with Cisco 2611XM as PSTN gatways. Any ideas whether this will work? Best regards, Gerhard __________________________________________________________________________________ Dieses Mail wurde vom Infotech SecureMail Service ueberprueft und fuer sicher befunden. Fuer weitere Informationen zu Infotech SecureMail Service waehlen Sie bitte: www.infotech.at/securemail/ This email has been scanned by Infotech SecureMail Service and it has been classified as secure. For more information on Infotech SecureMail direct your web browser to: www.infotech.at/securemail/

1 0

[Serusers] rtpproxy syntax error
by - zaki - 20 Feb '04

20 Feb '04

Hi, I've tried to use portaone rtpproxy with nathelper, but it looks there is interoperability problem. # export CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/ser # cvs co -r rel_0_8_12 sip_router # (cd sip_router; make install) # cvs co rtpproxy # (cd rtpproxy; ./configure; make install) # cp sip_router/etc/nathelper.cfg /usr/local/etc/ser/ser.cfg After editing ser.cfg to fit my site and starting ser and rtpproxy, when I tried to make a call from an endpoint A behind NAT to endpoint B behind NAT, signaling was OK(endpoint was ringing), but no media. In my /var/log/messages, following message appeared. "ERROR: send_rtpp_command: can't connect to RTP Proxy" So I traced rtpproxy process by "strace -p <rtpproxy's PID> -f -F", then I saw "rtpproxy: command syntax error:" message. I think there are no message format compatibility between sip_router (branch rel_0_8_12) and rtpproxy(latest). Should I use another version to work them together? Regards, -- zaki

2 2

[Serusers] Serweb no online user
by Laurent BURGY 20 Feb '04

20 Feb '04

Hi, when i untar the serweb distribution, i can't see the 'user' directory, which is requested when you click on 'account' in the admin user management page... is it normal ? Right now, i've just symlinked user and user_interface... On the other hand, i can't see the on-line user ... i need to take a look at the code?? ... thx laurent

2 2

Re: RES: [Serusers] radacc do not generate log files
by Daniel-Constantin Mierla 20 Feb '04

20 Feb '04

Hello, never send mails only to private address, please use the mailing list. No, you have to set the flag before relaying the message. If you want to account all calls you can put it before record_route(); .Daniel On 2/19/2004 10:13 PM, Jadylson Bomfim wrote: >Daniel > >Some like this ? > ># ># $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ ># ># simple quick-start config script ># > ># ----------- global configuration parameters ------------------------ > >#debug=3 # debug level (cmd line: -dddddddddd) >#fork=yes >#log_stderror=no # (cmd line: -E) > >#/* Uncomment these lines to enter debugging mode >debug=7 >fork=no >log_stderror=yes >#*/ > >check_via=no # (cmd. line: -v) >dns=no # (cmd. line: -r) >rev_dns=no # (cmd. line: -R) >#port=5060 >#children=4 >fifo="/tmp/ser_fifo" > ># ------------------ module loading ---------------------------------- > ># Uncomment this if you want to use SQL database >loadmodule "/usr/local/lib/ser/modules/mysql.so" > >loadmodule "/usr/local/lib/ser/modules/sl.so" >loadmodule "/usr/local/lib/ser/modules/tm.so" >loadmodule "/usr/local/lib/ser/modules/rr.so" >loadmodule "/usr/local/lib/ser/modules/maxfwd.so" >loadmodule "/usr/local/lib/ser/modules/usrloc.so" >loadmodule "/usr/local/lib/ser/modules/registrar.so" >loadmodule "/usr/local/lib/ser/modules/acc.so" ># Uncomment this if you want digest authentication ># mysql.so must be loaded ! >loadmodule "/usr/local/lib/ser/modules/auth.so" >loadmodule "/usr/local/lib/ser/modules/auth_db.so" >loadmodule "/usr/local/lib/ser/modules/auth_radius.so" ># ----------------- setting module-specific parameters --------------- > ># -- usrloc params -- > >#modparam("usrloc", "db_mode", 0) > ># Uncomment this if you want to use SQL database ># for persistent storage and comment the previous line >modparam("usrloc", "db_mode", 2) > ># -- auth params -- ># Uncomment if you are using auth module ># >#modparam("auth_db", "calculate_ha1", yes) ># ># If you set "calculate_ha1" parameter to yes (which true in this >config), ># uncomment also the following parameter) ># >#modparam("auth_db", "password_column", "kknd22") >modparam("auth_radius","radius_config","/usr/local/etc/radiusclient/radi >usclient.conf") >modparam("auth_radius","service_type",15) >modparam("acc","radius_config","/usr/local/etc/radiusclient/radiusclient >.conf") >modparam("acc", "service_type", 15) >modparam("acc", "radius_flag", 1) >modparam("acc", "radius_missed_flag", 3) >modparam("acc","radius_flag",2) > > > ># -- rr params -- ># add value to ;lr param to make some broken UAs happy >modparam("rr", "enable_full_lr", 1) > ># ------------------------- request routing logic ------------------- > ># main routing logic > >route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if ( msg:len > max_len ) { > sl_send_reply("513", "Message too big"); > break; > }; > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > record_route(); > # loose-route processing > if (loose_route()) { > t_relay(); > break; > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (uri==myself) { > > if (method=="REGISTER") { > ># Uncomment this if you want to use digest authentication > if (!radius_www_authorize("")) { > www_challenge("", "1"); > break; > }; > > save("location"); > break; > }; > > # native SIP destinations are handled using our USRLOC >DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > # forward to current uri now; use stateful forwarding; that > # works reliably even if we forward from TCP to UDP > if (!t_relay()) { > sl_reply_error(); > }; > >if (method=="INVITE" || method=="BYE" || method=="CANCEL") { > setflag(1); >}; > >} > > >Tks Jadylson > >-----Mensagem original----- >De: Daniel-Constantin Mierla [mailto:daniel@iptel.org] >Enviada em: quinta-feira, 19 de fevereiro de 2004 17:54 >Para: Jadylson Bomfim >Cc: serusers(a)lists.iptel.org >Assunto: Re: [Serusers] radacc do not generate log files > > >I dont know what happened with my email client, but you have to ignore >all slashes in my example. So, it would look like > >if (method=="INVITE" || method=="BYE" || method=="CANCEL") { > setflag(1); >}; > > >.Daniel > >On 2/19/2004 9:08 PM, Daniel-Constantin Mierla wrote: > > > >>Hello, >>you have to set the flag to 1 for those request you want to account, >>with setflag("1"). >>For example >> >>/if (//method=="INVITE" || //method=="BYE" || method=="CANCEL") { / / >>setflag(1); //}; / >> >>If you search into mailing list archive you will find many examples. >> >>.Daniel >> >>On 2/19/2004 8:21 PM, Jadylson Bomfim wrote: >> >> >> >>>Folks, >>> >>>I´m trying to use SER 0.8.12 with FreeRadius 0.9.3 and RadiusClient >>>0.3.2 >>>So, I get authentication but the radacc do not generate log neither >>>details directory either "details file" >>> >>>Could someone help me to fix this ? >>> >>>I hope that information bellow help you >>> >>>============== radiusd -X command =============== >>> >>> >>> >>>rad_recv: Access-Request packet from host 127.0.0.1:32867, id=111, >>>length=236 >>> >>>User-Name = "16008(a)192.168.0.252" >>> >>>Digest-Attributes = "\n\00716008" >>> >>>Digest-Attributes = "\001\017192.168.0.252" >>> >>>Digest-Attributes = "\002*4035094b8e9d86159d3443828c5dd602835c91d9" >>> >>>Digest-Attributes = "\004\023sip:192.168.0.252" >>> >>>Digest-Attributes = "\003\nREGISTER" >>> >>>Digest-Attributes = "\005\006auth" >>> >>>Digest-Attributes = "\t\n00000001" >>> >>>Digest-Attributes = "\010\013abcdefghi" >>> >>>Digest-Response = "76ec656e18c4e282ae8318f1a1ede8d8" >>> >>>Service-Type = Sip-Session >>> >>>Sip-Uri-User = "16008" >>> >>>NAS-IP-Address = 127.0.0.1 >>> >>>NAS-Port = 5060 >>> >>>modcall: entering group authorize for request 0 >>> >>>modcall[authorize]: module "preprocess" returns ok for request 0 >>> >>>modcall[authorize]: module "chap" returns noop for request 0 >>> >>>modcall[authorize]: module "eap" returns noop for request 0 >>> >>>rlm_digest: Converting Digest-Attributes to something sane... >>> >>>Digest-User-Name = "16008" >>> >>>Digest-Realm = "192.168.0.252" >>> >>>Digest-Nonce = "4035094b8e9d86159d3443828c5dd602835c91d9" >>> >>>Digest-Uri = "sip:192.168.0.252" >>> >>>Digest-Method = "REGISTER" >>> >>>Digest-Qop = "auth" >>> >>>Digest-Nonce-Count = "00000001" >>> >>>Digest-Cnonce = "abcdefghi" >>> >>>rlm_digest: Adding Auth-Type = DIGEST >>> >>>modcall[authorize]: module "digest" returns ok for request 0 >>> >>>rlm_realm: Looking up realm "192.168.0.252" for User-Name = >>>"16008(a)192.168.0.252" >>> >>>rlm_realm: No such realm "192.168.0.252" >>> >>>modcall[authorize]: module "suffix" returns noop for request 0 >>> >>>users: Matched DEFAULT at 152 >>> >>>users: Matched 16008(a)192.168.0.252 at 218 >>> >>>modcall[authorize]: module "files" returns ok for request 0 >>> >>>modcall[authorize]: module "mschap" returns noop for request 0 >>> >>>modcall: group authorize returns ok for request 0 >>> >>>rad_check_password: Found Auth-Type Digest >>> >>>auth: type "digest" >>> >>>modcall: entering group authenticate for request 0 >>> >>>A1 = 16008:192.168.0.252:teste >>> >>>A2 = REGISTER:sip:192.168.0.252 >>> >>>KD = >>> >>> >>> >ced97c4bdc31efb9e87d518cbf7199de:4035094b8e9d86159d3443828c5dd602835c91d >9:00000001:abcdefghi:auth:157f8b98cafef48ffc426fbd0e38c842 > > >>>modcall[authenticate]: module "digest" returns ok for request 0 >>> >>>modcall: group authenticate returns ok for request 0 >>> >>>radius_xlat: 'Authenticated' >>> >>>Login OK: [16008(a)192.168.0.252/<no User-Password attribute>] (from >>>client localhost port 5060) Sending Access-Accept of id 111 to >>>127.0.0.1:32867 >>> >>>Reply-Message = "Authenticated" >>> >>>Finished request 0 >>> >>> >>> >>> >>> >>>========= ser.cfg file ================ >>> >>># >>> >>># $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ >>> >>># >>> >>># simple quick-start config script >>> >>># >>> >>># ----------- global configuration parameters >>>------------------------ >>> >>>#debug=3 # debug level (cmd line: -dddddddddd) >>> >>>#fork=yes >>> >>>#log_stderror=no # (cmd line: -E) >>> >>>#/* Uncomment these lines to enter debugging mode >>> >>>debug=7 >>> >>>fork=no >>> >>>log_stderror=yes >>> >>>#*/ >>> >>>check_via=no # (cmd. line: -v) >>> >>>dns=no # (cmd. line: -r) >>> >>>rev_dns=no # (cmd. line: -R) >>> >>>#port=5060 >>> >>>#children=4 >>> >>>fifo="/tmp/ser_fifo" >>> >>># ------------------ module loading >>>---------------------------------- >>> >>># Uncomment this if you want to use SQL database >>> >>>loadmodule "/usr/local/lib/ser/modules/mysql.so" >>> >>>loadmodule "/usr/local/lib/ser/modules/sl.so" >>> >>>loadmodule "/usr/local/lib/ser/modules/tm.so" >>> >>>loadmodule "/usr/local/lib/ser/modules/rr.so" >>> >>>loadmodule "/usr/local/lib/ser/modules/maxfwd.so" >>> >>>loadmodule "/usr/local/lib/ser/modules/usrloc.so" >>> >>>loadmodule "/usr/local/lib/ser/modules/registrar.so" >>> >>>loadmodule "/usr/local/lib/ser/modules/acc.so" >>> >>># Uncomment this if you want digest authentication >>> >>># mysql.so must be loaded ! >>> >>>loadmodule "/usr/local/lib/ser/modules/auth.so" >>> >>>loadmodule "/usr/local/lib/ser/modules/auth_db.so" >>> >>>loadmodule "/usr/local/lib/ser/modules/auth_radius.so" >>> >>># ----------------- setting module-specific parameters >>>--------------- >>> >>># -- usrloc params -- >>> >>>#modparam("usrloc", "db_mode", 0) >>> >>># Uncomment this if you want to use SQL database >>> >>># for persistent storage and comment the previous line >>> >>>modparam("usrloc", "db_mode", 2) >>> >>># -- auth params -- >>> >>># Uncomment if you are using auth module >>> >>># >>> >>>#modparam("auth_db", "calculate_ha1", yes) >>> >>># >>> >>># If you set "calculate_ha1" parameter to yes (which true in this >>>config), >>> >>># uncomment also the following parameter) >>> >>># >>> >>>#modparam("auth_db", "password_column", "kknd22") >>> >>>modparam("auth_radius","radius_config","/usr/local/etc/radiusclient/r >>>adiusclient.conf") >>> >>> >>>modparam("auth_radius","service_type",15) >>> >>>modparam("acc","radius_config","/usr/local/etc/radiusclient/radiuscli >>>ent.conf") >>> >>> >>>modparam("acc", "service_type", 15) >>> >>>modparam("acc", "radius_flag", 1) >>> >>>modparam("acc", "radius_missed_flag", 2) >>> >>>modparam("acc","radius_flag",1) >>> >>> >>> >>> >>> >>># -- rr params -- >>> >>># add value to ;lr param to make some broken UAs happy >>> >>>modparam("rr", "enable_full_lr", 1) >>> >>># ------------------------- request routing logic ------------------- >>> >>># main routing logic >>> >>>route{ >>> >>># initial sanity checks -- messages with >>> >>># max_forwards==0, or excessively long requests >>> >>>if (!mf_process_maxfwd_header("10")) { >>> >>>sl_send_reply("483","Too Many Hops"); >>> >>>break; >>> >>>}; >>> >>>if ( msg:len > max_len ) { >>> >>>sl_send_reply("513", "Message too big"); >>> >>>break; >>> >>>}; >>> >>># we record-route all messages -- to make sure that >>> >>># subsequent messages will go through our proxy; that's >>> >>># particularly good if upstream and downstream entities >>> >>># use different transport protocol >>> >>>record_route(); >>> >>># loose-route processing >>> >>>if (loose_route()) { >>> >>>t_relay(); >>> >>>break; >>> >>>}; >>> >>># if the request is for other domain use UsrLoc >>> >>># (in case, it does not work, use the following command >>> >>># with proper names and addresses in it) >>> >>>if (uri==myself) { >>> >>>if (method=="REGISTER") { >>> >>># Uncomment this if you want to use digest authentication >>> >>>if (!radius_www_authorize("")) { >>> >>>www_challenge("", "1"); >>> >>>break; >>> >>>}; >>> >>>save("location"); >>> >>>break; >>> >>>}; >>> >>># native SIP destinations are handled using our USRLOC DB >>> >>>if (!lookup("location")) { >>> >>>sl_send_reply("404", "Not Found"); >>> >>>break; >>> >>>}; >>> >>>}; >>> >>># forward to current uri now; use stateful forwarding; that >>> >>># works reliably even if we forward from TCP to UDP >>> >>>if (!t_relay()) { >>> >>>sl_reply_error(); >>> >>>}; >>> >>>} >>> >>>Thanks in advance >>> >>>Jadylson Bomfim >>>Redevox Telecom >>>+55 34 32347813 >>>www.redevox.com.br >>> >>>--- >>>Outgoing mail is certified Virus Free. >>>Checked by AVG anti-virus system (http://www.grisoft.com). >>>Version: 6.0.592 / Virus Database: 375 - Release Date: 18/2/2004 >>> >>>--------------------------------------------------------------------- >>>--- >>> >>>_______________________________________________ >>>Serusers mailing list >>>serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers >>> >>> >>> >>> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers >> >> >> > >--- >Incoming mail is certified Virus Free. >Checked by AVG anti-virus system (http://www.grisoft.com). >Version: 6.0.592 / Virus Database: 375 - Release Date: 18/2/2004 > > >--- >Outgoing mail is certified Virus Free. >Checked by AVG anti-virus system (http://www.grisoft.com). >Version: 6.0.592 / Virus Database: 375 - Release Date: 18/2/2004 > > > > >

1 0

[Serusers] rtpproxy syntax error
by - zaki - 20 Feb '04

20 Feb '04

1 0

← Newer
1
...
10
11
12
13
14
15
16
...
39
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users February 2004