sr-users February 2004

sr-users@lists.kamailio.org

144 participants
382 discussions

Re: [Serusers] SER + SEMS
by Kapil Dhawan 24 Feb '04

24 Feb '04

yeah i updated alll but the problem is still there...after running successfully once...it hangs...don't know why....... i mean it worked successfully once and then hanged hi yes it worked for me thx alot let me check the problems which were coming earlier ok and i got the error also due to bad command i was writing i will work on it and come back >From: "Raphael Coeffic" <rco(a)iptel.org> >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> >Subject: Re: [Serusers] SER + SEMS >Date: Tue, 24 Feb 2004 13:16:52 +0100 > >Hi! > > > CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/sems > > export CVSROOT > > cvs co answer_machine > >you should use instead 'cvs co -r ser_rel_0_8_12 answer_machine'. > > > CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/ser > > export CVSROOT > > cvs co -r rel_0_8_12 sip_router > >Both command work same if you type the CVSROOT as -d parameter as i wrote >to >you. It's then important to type it as ONE line. >(every thing on the same cmd line: >'cvs -d:pserver:anonymous@cvs.berlios.de:/cvsroot/sems co -r ser_rel_0_8_12 >answer_machine') > >-Raphael. > _________________________________________________________________ INDIA TODAY @ Rs. 5 + a free gift ! http://www.indiatoday.com/itoday/intlsubscription/itsubs/it_offer.html Subcribe Now ...

1 0

[Serusers] Rtpproxy
by Shirley Toh 24 Feb '04

24 Feb '04

Hi, Can anyone help me!! I am having this error on my log file when I try to make calls. I have attached my ser.cfg. Please help!! Thanks!! Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20404]: ERROR: send_rtpp_command: can't read reply from a RTP proxy Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20413]: ERROR: extract_body: message body has lenght zero Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20413]: ERROR: force_rtp_proxy: can't extract body from the message Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20413]: ERROR: on_reply processing failed Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20417]: ERROR: extract_body: message body has lenght zero Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20417]: ERROR: force_rtp_proxy: can't extract body from the message Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20417]: ERROR: on_reply processing failed Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20417]: ERROR: extract_body: message body has lenght zero Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20417]: ERROR: force_rtp_proxy: can't extract body from the message Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20417]: ERROR: on_reply processing failed Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20407]: ERROR: extract_body: message body has lenght zero Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20407]: ERROR: fix_nated_sdp: cannot extract body from msg! Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20407]: ERROR: extract_body: message body has lenght zero Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20407]: ERROR: force_rtp_proxy: can't extract body from the message Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20407]: ERROR: on_reply processing failed <<ser.cfg.txt>> regards, shirley

2 1

[Serusers] cisco pix and ser
by Yang Xiang 24 Feb '04

24 Feb '04

Hi Laurent, yes, we have tested Cisco PIX with NAT and SIP. SER works fine with our PIX installation. Since there are always bugs regarding SIP , you should use the newest IOS. We are using 6.3(3)113, which version do you have? Is fixup activated with you? Maybe you could send me your pix config. Regards yang

1 0

Re: [Serusers] SER + SEMS
by Kapil Dhawan 24 Feb '04

24 Feb '04

this is what i was doing CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/sems export CVSROOT cvs co answer_machine and for ser CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/ser export CVSROOT cvs co -r rel_0_8_12 sip_router >From: "Raphael Coeffic" <rco(a)iptel.org> >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> >CC: <serusers(a)lists.iptel.org> >Subject: Re: [Serusers] SER + SEMS >Date: Tue, 24 Feb 2004 12:30:44 +0100 > > >cvs -d:pserver:anonymous@cvs.berlios.de:/cvsroot/ser co -r rel_0_8_12 >sip_router >cvs -d:pserver:anonymous@cvs.berlios.de:/cvsroot/sems co -r ser_rel_0_8_12 >answer_machine > >-Raphael. > >----- Original Message ----- >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> >To: <rco(a)iptel.org> >Cc: <serusers(a)lists.iptel.org> >Sent: Tuesday, February 24, 2004 12:21 PM >Subject: Re: [Serusers] SER + SEMS > > > > thx for the response > > > > but can u pls paste the cvs commands to obtain both the versions...i am >fed > > up with my idiotic commands now.... > > > > > > > > >From: "Raphael Coeffic" <rco(a)iptel.org> > > >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> > > >Subject: Re: [Serusers] SER + SEMS > > >Date: Tue, 24 Feb 2004 12:17:06 +0100 > > > > > >Hi! > > > > > >the current stable Ser+Sems version is 0.8.12. I recommend you to use >that > > >version, as the lastest unstable version (head CVS that you are >currently > > >using) is only for developping purpose, or if you need some special > > >feature... > > > > > >Please checkout SEMS with 'ser_rel_0_8_12' tag and use Ser 0.8.12 (also > > >from > > >CVS, tag: 'rel_0_8_12'). > > > > > >-Raphael. > > >PS: if other problems occurs only related to sems, please drop a mail >at > > >sems(a)lists.iptel.org. > > > > > >----- Original Message ----- > > >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> > > >To: <serusers(a)lists.iptel.org> > > >Sent: Tuesday, February 24, 2004 10:35 AM > > >Subject: RE: [Serusers] SER + SEMS > > > > > > > > > > I have tried to debug all this > > > > > > > > this is what i get] > > > > (1185) DEBUG: run (AmServer.cpp:165): version= <0.2> > > > > (1185) DEBUG: run (AmServer.cpp:170): fct_name= ><sip_request.voicemail> > > > > (1185) DEBUG: execute (AmServer.cpp:229): cmd.method= <INVITE> > > > > (1185) DEBUG: execute (AmServer.cpp:230): cmd.user= <1111> > > > > (1185) DEBUG: execute (AmServer.cpp:231): cmd.email= > > > > <kdhawan(a)primus-direct.com> > > > > (1185) DEBUG: execute (AmServer.cpp:232): cmd.domain= ><203.196.128.126> > > > > (1185) DEBUG: execute (AmServer.cpp:233): cmd.dstip= ><203.196.128.126> > > > > (1185) DEBUG: execute (AmServer.cpp:234): cmd.port= <> > > > > (1185) DEBUG: execute (AmServer.cpp:235): cmd.r_uri= > > > > <sip:1111@203.196.128.126;user=phone> > > > > (1185) DEBUG: execute (AmServer.cpp:236): cmd.from_uri= > > > > <sip:3333@203.196.128.122:5060;user=phone;transport=udp> > > > > (1185) DEBUG: execute (AmServer.cpp:237): cmd.from= > > > > <<sip:3333@203.196.128.126;user=phone> > > > > > (1185) DEBUG: execute (AmServer.cpp:238): cmd.to= > > > > <<sip:1111@203.196.128.126;user=phone>> > > > > (1185) DEBUG: execute (AmServer.cpp:239): cmd.callid= > > > > <04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.122> > > > > (1185) DEBUG: execute (AmServer.cpp:240): cmd.from_tag= <32351> > > > > (1185) DEBUG: execute (AmServer.cpp:241): cmd.to_tag= <> > > > > (1185) DEBUG: execute (AmServer.cpp:244): cseq_str= <8> > > > > (1185) DEBUG: execute (AmServer.cpp:249): cseq= <8>(8) > > > > (1185) DEBUG: execute (AmServer.cpp:251): cmd.key= ><31558:1504541206> > > > > (1185) DEBUG: execute (AmServer.cpp:252): cmd.route= <> > > > > (1185) DEBUG: execute (AmServer.cpp:253): cmd.next_hop= <> > > > > (1185) DEBUG: execute (AmServer.cpp:259): hdrs: `P-MsgFlags: 0 > > > > Session-Expires: 1800 > > > > Min-SE: 1800 > > > > ' > > > > (1185) DEBUG: execute (AmServer.cpp:266): body: `v=0 > > > > o=SS-TA101 23265 23265 IN IP4 203.196.128.122 > > > > s=- > > > > c=IN IP4 203.196.128.122 > > > > t=0 0 > > > > m=audio 54321 RTP/AVP 0 8 18 4 96 > > > > a=rtpmap:0 PCMU/8000 > > > > a=rtpmap:8 PCMA/8000 > > > > a=rtpmap:18 G729/8000 > > > > a=rtpmap:4 G723-63/8000 > > > > a=rtpmap:96 telephone-event/8000 > > > > a=fmtp:96 0-11 > > > > ' > > > > (1185) DEBUG: execute (AmServer.cpp:277): everything is OK ! > > > > (1185) DEBUG: onInvite (AnswerMachine.cpp:133): email address for >user > > > > '1111': kdhawan(a)primus-direct.com > > > > (1185) DEBUG: startSession (AmSession.cpp:435): Starting session... > > > > > > > >(hash=04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.12232351,sess_key=00 >0 > > >004A12F57B1AE) > > > > (1191) DEBUG: parse_sdp_attribute (AmSdp.cpp:596): unknown attribute > > > > definition 'fmtp:96 0-11' > > > > (1191) DEBUG: run (AmSession.cpp:124): dir=0; msg_flags=0 > > > > (1191) DEBUG: sendToFIFO (AmRequest.cpp:199): > > > > msg=<:vm_reply:000004A7166E92A0 > > > > 180 > > > > ringing > > > > 31558:1504541206 > > > > 000004A12F57B1AE > > > > Contact: <sip:1111@203.196.128.126> > > > > . > > > > . > > > > > > > > > > > > > (1191) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: > > >completed > > > > (1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: >200 > > > > fifo_t_reply succeeded > > > > (1191) DEBUG: getReturnCode (AmRequest.cpp:442): n_cmd.from_uri= <> > > > > (1191) DEBUG: getReturnCode (AmRequest.cpp:445): n_cmd.next_hop= <> > > > > (1191) DEBUG: getReturnCode (AmRequest.cpp:448): n_cmd.route= <> > > > > (1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns > > > > ret=getReturnCode=0 > > > > (1191) DEBUG: setLocalPort (AmRtpStream.cpp:129): setting random >local > > >port > > > > (1191) DEBUG: setLocalPort (AmRtpStream.cpp:158): local rtp port set >to > > > > 35226 > > > > (1191) DEBUG: sendToFIFO (AmRequest.cpp:199): > > > > msg=<:vm_reply:000004A756924871 > > > > 200 > > > > OK > > > > 31558:1504541206 > > > > 000004A12F57B1AE > > > > Contact: <sip:1111@203.196.128.126> > > > > Content-Type: application/sdp > > > > . > > > > v=0 > > > > o=username 0 0 IN IP4 203.196.128.126 > > > > s=session > > > > c=IN IP4 203.196.128.126 > > > > t=0 0 > > > > m=audio 35226 RTP/AVP 0 > > > > a=rtpmap:0 PCMU/8000 > > > > . > > > > > > > > > > > > > (1191) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: > > >completed > > > > (1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: >200 > > > > fifo_t_reply succeeded > > > > (1191) DEBUG: getReturnCode (AmRequest.cpp:442): n_cmd.from_uri= <> > > > > (1191) DEBUG: getReturnCode (AmRequest.cpp:445): n_cmd.next_hop= <> > > > > (1191) DEBUG: getReturnCode (AmRequest.cpp:448): n_cmd.route= <> > > > > (1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns > > > > ret=getReturnCode=0 > > > > (1191) DEBUG: setRAddr (AmRtpStream.cpp:321): RTP remote address set >to > > > > 203.196.128.122:54321 > > > > (1191) DEBUG: run (AmSession.cpp:143): Sending Rtp data to > > > > 203.196.128.122/54321 > > > > (1191) DEBUG: onSessionStart (AnswerMachine.cpp:162): starting >sending > > > > announce...(/usr/local/lib/sems/audio/default.wav) > > > > (1191) DEBUG: trying to read WAV file > > > > (1191) DEBUG: tag = <RIFF> > > > > (1191) DEBUG: file size = <129710> > > > > (1191) DEBUG: tag = <WAVE> > > > > (1191) DEBUG: tag = <fmt > > > > > (1191) DEBUG: chunk_size = <18> > > > > (1191) DEBUG: fmt = <01> > > > > (1191) DEBUG: channels = <1> > > > > (1191) DEBUG: rate = <8000> > > > > (1191) DEBUG: bits/sample = <16> > > > > (1191) DEBUG: tag = <fact> > > > > (1191) DEBUG: chunk size = <4> > > > > (1191) DEBUG: tag = <data> > > > > (1191) DEBUG: chunk size = <129660> > > > > > > > > > > > > > > > > ERROR ERROR ERROR > > > > > > > > (1185) DEBUG: run (AmServer.cpp:165): version= <> > > > > (1185) ERROR: run (AmServer.cpp:194): wrong FIFO Interface version. > > > > > > > > > > > > > > > > (1191) DEBUG: streamGet (AmAudio.cpp:479): 0-stuffing packet: adding >260 > > > > bytes (packet size=320) > > > > (1191) DEBUG: convert (AmAudio.cpp:208): end of stream > > > > (1191) DEBUG: onSessionStart (AnswerMachine.cpp:164): ... announce > > >reaches > > > > its end. > > > > (1191) DEBUG: onSessionStart (AnswerMachine.cpp:170): starting >recording > > > > > > > >message...(/tmp/04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.122.wav) > > > > (1191) DEBUG: onSessionStart (AnswerMachine.cpp:173): ... finished > > >recording > > > > message > > > > (1191) DEBUG: sendToFIFO (AmRequest.cpp:199): > > > > msg=<:t_uac_dlg:000004A7326ED90A > > > > BYE > > > > sip:3333@203.196.128.122:5060;user=phone;transport=udp > > > > . > > > > From: <sip:1111@203.196.128.126;user=phone>;tag=000004A12F57B1AE > > > > To: <sip:3333@203.196.128.126;user=phone> ;tag=32351 > > > > CSeq: 9 BYE > > > > Call-ID: 04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.122 > > > > Contact: <sip:1111@203.196.128.126> > > > > . > > > > . > > > > > > > > > > > > > (1191) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: > > >completed > > > > (1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: >481 > > >Call > > > > Leg/Transaction Does Not Exist > > > > (1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns > > > > ret=getReturnCode=0 > > > > (1191) ERROR: bye (AmRequest.cpp:243): AmRequest::bye: 481 Call > > > > Leg/Transaction Does Not Exist > > > > (1191) DEBUG: onSessionStart (AnswerMachine.cpp:179): recorded data > > >size: > > >0 > > > > (1191) DEBUG: sadSession (AmSession.cpp:309): searching for session >to > > > > destroy > > > > > > > >(hash=04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.12232351,sess_key=00 >0 > > >004A12F57B1AE) > > > > (1191) DEBUG: findSession (AmSession.cpp:373): session found with >key > > > > (1191) DEBUG: destroySession (AmSession.cpp:331): sess_it != > > > > a_sessions.end() > > > > (1191) DEBUG: destroySession (AmSession.cpp:334): it != > > > > sess_it->second.end() > > > > (1191) DEBUG: destroySession (AmSession.cpp:341): session found: > > >stopping > > > > session > > > > (1191) DEBUG: stopAndQueue (AmSession.cpp:289): session cleaner >trying > > >to > > > > stop 80c8e18 > > > > (1191) DEBUG: postEvent (AmEventQueue.cpp:47): AmEventQueue: trying >to > > >post > > > > event > > > > (1191) DEBUG: postEvent (AmEventQueue.cpp:55): AmEventQueue: event > > >posted > > > > (1191) DEBUG: destroySession (AmSession.cpp:343): session stopped >and > > > > destroyed (#sessions=0) > > > > (1188) DEBUG: run (AmSession.cpp:242): Session cleaner starting its >work > > > > (1188) DEBUG: run (AmSession.cpp:256): session 80c8e18 has been > > >destroyed' > > > > (1188) DEBUG: run (AmSession.cpp:279): Session cleaner finished > > > > > > > > > > > > > > > > >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> > > > > >To: serusers(a)lists.iptel.org > > > > >Subject: [Serusers] SER + SEMS > > > > >Date: Tue, 24 Feb 2004 07:29:16 +0000 > > > > > > > > > >Hi All... > > > > > > > > > >i am running SER perfectly....Now i am facing problem with running > > >SEMS.... > > > > > > > > > >i have tried SER 0.8.12(current sems cvs update ) and 0.8.11(sems >0.11) > > >i > > > > >am unable to do anything.... > > > > > > > > > > > > > > >whats happening is.... > > > > > > > > > >my SER is already installed.....and working...now i am compiling it > > >with > > >vm > > > > >module and making Multi Domain off (in 0.8.11) and its off in >0.8.12 >as > > >it > > > > >depends upon domain module there....so no problem with multidomain > > > > >support...so it works fine...following is the code of ser.cfg > > > > > > > > > > if(method=="ACK" || method=="INVITE" || >method=="BYE"){ > > > > > if (!t_newtran()) { > > > > > log("could not create new transaction\n"); > > > > > sl_send_reply("500","could not create new > > > > >transaction"); > > > > > break; > > > > > }; > > > > > > > > > > if(!vm("/tmp/am_fifo", "voicemail")){ > > > > > > > > > > lookup("aliases"); > > > > > if (!uri==myself) { > > > > > append_hf("P-hint: outbound alias\r\n"); > > > > > route(1); > > > > > break; > > > > > }; > > > > > > > > > > # native SIP destinations are handled using our >USRLOC > > >DB > > > > > if (!lookup("location")) { > > > > > sl_send_reply("404", "Not Found"); > > > > > break; > > > > > }; > > > > > }; > > > > > }; > > > > > > > > > > > > > > >Next....is i am compiling current version of sems...from cvs with > > >following > > > > >command > > > > > > > > > >CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/sems > > > > >export CVSROOT > > > > >cvs co answer_machine > > > > > > > > > >now it also gets compiled with one or two erros of audio file paths > > > > >etc...which i corrected in /etc/sems/sems.conf and enaled voicemail > > >module > > > > >in it.. > > > > > > > > > >Now when i run it sems -D 3 -E > > > > > > > > > >it shows me sems started successsfully.....but when i try and give >a > > >call > > > > >so that it shud be transfered to voicemail...in sems log i see ## >Wrong > > > > >FIFO Interface version ## > > > > > > > > > >due to which ...my wav file which is getting stored in /tmp folder >is > > > > >having 44 bytes size always...i know there is version >conflict...but >i > > >am > > > > >unable to get proper matching versions of both............. > > > > > > > > > >kidly help me out...if u need i can attach any more info too... > > > > > > > > > >kapil > > > > > > > > > >_________________________________________________________________ > > > > >Contact brides & grooms FREE! > > >http://www.shaadi.com/ptnr.php?ptnr=hmltag > > > > >Only on www.shaadi.com. Register now! > > > > > > > > > >_______________________________________________ > > > > >Serusers mailing list > > > > >serusers(a)lists.iptel.org > > > > >http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > _________________________________________________________________ > > > > Contact brides & grooms FREE! >http://www.shaadi.com/ptnr.php?ptnr=hmltag > > > > Only on www.shaadi.com. Register now! > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > > > serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > _________________________________________________________________ > > INDIA TODAY @ Rs. 5 + a free gift ! > > http://www.indiatoday.com/itoday/intlsubscription/itsubs/it_offer.html > > Subcribe Now ... > > > _________________________________________________________________ Oscar fever is on! It's Hollywood's biggest party. http://server1.msn.co.in/sp04/oscars/index.asp Get all the dope here.

1 0

Re: [Serusers] SER + SEMS
by Kapil Dhawan 24 Feb '04

24 Feb '04

thx for the response but can u pls paste the cvs commands to obtain both the versions...i am fed up with my idiotic commands now.... >From: "Raphael Coeffic" <rco(a)iptel.org> >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> >Subject: Re: [Serusers] SER + SEMS >Date: Tue, 24 Feb 2004 12:17:06 +0100 > >Hi! > >the current stable Ser+Sems version is 0.8.12. I recommend you to use that >version, as the lastest unstable version (head CVS that you are currently >using) is only for developping purpose, or if you need some special >feature... > >Please checkout SEMS with 'ser_rel_0_8_12' tag and use Ser 0.8.12 (also >from >CVS, tag: 'rel_0_8_12'). > >-Raphael. >PS: if other problems occurs only related to sems, please drop a mail at >sems(a)lists.iptel.org. > >----- Original Message ----- >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> >To: <serusers(a)lists.iptel.org> >Sent: Tuesday, February 24, 2004 10:35 AM >Subject: RE: [Serusers] SER + SEMS > > > > I have tried to debug all this > > > > this is what i get] > > (1185) DEBUG: run (AmServer.cpp:165): version= <0.2> > > (1185) DEBUG: run (AmServer.cpp:170): fct_name= <sip_request.voicemail> > > (1185) DEBUG: execute (AmServer.cpp:229): cmd.method= <INVITE> > > (1185) DEBUG: execute (AmServer.cpp:230): cmd.user= <1111> > > (1185) DEBUG: execute (AmServer.cpp:231): cmd.email= > > <kdhawan(a)primus-direct.com> > > (1185) DEBUG: execute (AmServer.cpp:232): cmd.domain= <203.196.128.126> > > (1185) DEBUG: execute (AmServer.cpp:233): cmd.dstip= <203.196.128.126> > > (1185) DEBUG: execute (AmServer.cpp:234): cmd.port= <> > > (1185) DEBUG: execute (AmServer.cpp:235): cmd.r_uri= > > <sip:1111@203.196.128.126;user=phone> > > (1185) DEBUG: execute (AmServer.cpp:236): cmd.from_uri= > > <sip:3333@203.196.128.122:5060;user=phone;transport=udp> > > (1185) DEBUG: execute (AmServer.cpp:237): cmd.from= > > <<sip:3333@203.196.128.126;user=phone> > > > (1185) DEBUG: execute (AmServer.cpp:238): cmd.to= > > <<sip:1111@203.196.128.126;user=phone>> > > (1185) DEBUG: execute (AmServer.cpp:239): cmd.callid= > > <04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.122> > > (1185) DEBUG: execute (AmServer.cpp:240): cmd.from_tag= <32351> > > (1185) DEBUG: execute (AmServer.cpp:241): cmd.to_tag= <> > > (1185) DEBUG: execute (AmServer.cpp:244): cseq_str= <8> > > (1185) DEBUG: execute (AmServer.cpp:249): cseq= <8>(8) > > (1185) DEBUG: execute (AmServer.cpp:251): cmd.key= <31558:1504541206> > > (1185) DEBUG: execute (AmServer.cpp:252): cmd.route= <> > > (1185) DEBUG: execute (AmServer.cpp:253): cmd.next_hop= <> > > (1185) DEBUG: execute (AmServer.cpp:259): hdrs: `P-MsgFlags: 0 > > Session-Expires: 1800 > > Min-SE: 1800 > > ' > > (1185) DEBUG: execute (AmServer.cpp:266): body: `v=0 > > o=SS-TA101 23265 23265 IN IP4 203.196.128.122 > > s=- > > c=IN IP4 203.196.128.122 > > t=0 0 > > m=audio 54321 RTP/AVP 0 8 18 4 96 > > a=rtpmap:0 PCMU/8000 > > a=rtpmap:8 PCMA/8000 > > a=rtpmap:18 G729/8000 > > a=rtpmap:4 G723-63/8000 > > a=rtpmap:96 telephone-event/8000 > > a=fmtp:96 0-11 > > ' > > (1185) DEBUG: execute (AmServer.cpp:277): everything is OK ! > > (1185) DEBUG: onInvite (AnswerMachine.cpp:133): email address for user > > '1111': kdhawan(a)primus-direct.com > > (1185) DEBUG: startSession (AmSession.cpp:435): Starting session... > > >(hash=04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.12232351,sess_key=000 >004A12F57B1AE) > > (1191) DEBUG: parse_sdp_attribute (AmSdp.cpp:596): unknown attribute > > definition 'fmtp:96 0-11' > > (1191) DEBUG: run (AmSession.cpp:124): dir=0; msg_flags=0 > > (1191) DEBUG: sendToFIFO (AmRequest.cpp:199): > > msg=<:vm_reply:000004A7166E92A0 > > 180 > > ringing > > 31558:1504541206 > > 000004A12F57B1AE > > Contact: <sip:1111@203.196.128.126> > > . > > . > > > > > > > (1191) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: >completed > > (1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200 > > fifo_t_reply succeeded > > (1191) DEBUG: getReturnCode (AmRequest.cpp:442): n_cmd.from_uri= <> > > (1191) DEBUG: getReturnCode (AmRequest.cpp:445): n_cmd.next_hop= <> > > (1191) DEBUG: getReturnCode (AmRequest.cpp:448): n_cmd.route= <> > > (1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns > > ret=getReturnCode=0 > > (1191) DEBUG: setLocalPort (AmRtpStream.cpp:129): setting random local >port > > (1191) DEBUG: setLocalPort (AmRtpStream.cpp:158): local rtp port set to > > 35226 > > (1191) DEBUG: sendToFIFO (AmRequest.cpp:199): > > msg=<:vm_reply:000004A756924871 > > 200 > > OK > > 31558:1504541206 > > 000004A12F57B1AE > > Contact: <sip:1111@203.196.128.126> > > Content-Type: application/sdp > > . > > v=0 > > o=username 0 0 IN IP4 203.196.128.126 > > s=session > > c=IN IP4 203.196.128.126 > > t=0 0 > > m=audio 35226 RTP/AVP 0 > > a=rtpmap:0 PCMU/8000 > > . > > > > > > > (1191) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: >completed > > (1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200 > > fifo_t_reply succeeded > > (1191) DEBUG: getReturnCode (AmRequest.cpp:442): n_cmd.from_uri= <> > > (1191) DEBUG: getReturnCode (AmRequest.cpp:445): n_cmd.next_hop= <> > > (1191) DEBUG: getReturnCode (AmRequest.cpp:448): n_cmd.route= <> > > (1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns > > ret=getReturnCode=0 > > (1191) DEBUG: setRAddr (AmRtpStream.cpp:321): RTP remote address set to > > 203.196.128.122:54321 > > (1191) DEBUG: run (AmSession.cpp:143): Sending Rtp data to > > 203.196.128.122/54321 > > (1191) DEBUG: onSessionStart (AnswerMachine.cpp:162): starting sending > > announce...(/usr/local/lib/sems/audio/default.wav) > > (1191) DEBUG: trying to read WAV file > > (1191) DEBUG: tag = <RIFF> > > (1191) DEBUG: file size = <129710> > > (1191) DEBUG: tag = <WAVE> > > (1191) DEBUG: tag = <fmt > > > (1191) DEBUG: chunk_size = <18> > > (1191) DEBUG: fmt = <01> > > (1191) DEBUG: channels = <1> > > (1191) DEBUG: rate = <8000> > > (1191) DEBUG: bits/sample = <16> > > (1191) DEBUG: tag = <fact> > > (1191) DEBUG: chunk size = <4> > > (1191) DEBUG: tag = <data> > > (1191) DEBUG: chunk size = <129660> > > > > > > > > ERROR ERROR ERROR > > > > (1185) DEBUG: run (AmServer.cpp:165): version= <> > > (1185) ERROR: run (AmServer.cpp:194): wrong FIFO Interface version. > > > > > > > > (1191) DEBUG: streamGet (AmAudio.cpp:479): 0-stuffing packet: adding 260 > > bytes (packet size=320) > > (1191) DEBUG: convert (AmAudio.cpp:208): end of stream > > (1191) DEBUG: onSessionStart (AnswerMachine.cpp:164): ... announce >reaches > > its end. > > (1191) DEBUG: onSessionStart (AnswerMachine.cpp:170): starting recording > > >message...(/tmp/04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.122.wav) > > (1191) DEBUG: onSessionStart (AnswerMachine.cpp:173): ... finished >recording > > message > > (1191) DEBUG: sendToFIFO (AmRequest.cpp:199): > > msg=<:t_uac_dlg:000004A7326ED90A > > BYE > > sip:3333@203.196.128.122:5060;user=phone;transport=udp > > . > > From: <sip:1111@203.196.128.126;user=phone>;tag=000004A12F57B1AE > > To: <sip:3333@203.196.128.126;user=phone> ;tag=32351 > > CSeq: 9 BYE > > Call-ID: 04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.122 > > Contact: <sip:1111@203.196.128.126> > > . > > . > > > > > > > (1191) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: >completed > > (1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 481 >Call > > Leg/Transaction Does Not Exist > > (1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns > > ret=getReturnCode=0 > > (1191) ERROR: bye (AmRequest.cpp:243): AmRequest::bye: 481 Call > > Leg/Transaction Does Not Exist > > (1191) DEBUG: onSessionStart (AnswerMachine.cpp:179): recorded data >size: >0 > > (1191) DEBUG: sadSession (AmSession.cpp:309): searching for session to > > destroy > > >(hash=04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.12232351,sess_key=000 >004A12F57B1AE) > > (1191) DEBUG: findSession (AmSession.cpp:373): session found with key > > (1191) DEBUG: destroySession (AmSession.cpp:331): sess_it != > > a_sessions.end() > > (1191) DEBUG: destroySession (AmSession.cpp:334): it != > > sess_it->second.end() > > (1191) DEBUG: destroySession (AmSession.cpp:341): session found: >stopping > > session > > (1191) DEBUG: stopAndQueue (AmSession.cpp:289): session cleaner trying >to > > stop 80c8e18 > > (1191) DEBUG: postEvent (AmEventQueue.cpp:47): AmEventQueue: trying to >post > > event > > (1191) DEBUG: postEvent (AmEventQueue.cpp:55): AmEventQueue: event >posted > > (1191) DEBUG: destroySession (AmSession.cpp:343): session stopped and > > destroyed (#sessions=0) > > (1188) DEBUG: run (AmSession.cpp:242): Session cleaner starting its work > > (1188) DEBUG: run (AmSession.cpp:256): session 80c8e18 has been >destroyed' > > (1188) DEBUG: run (AmSession.cpp:279): Session cleaner finished > > > > > > > > >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> > > >To: serusers(a)lists.iptel.org > > >Subject: [Serusers] SER + SEMS > > >Date: Tue, 24 Feb 2004 07:29:16 +0000 > > > > > >Hi All... > > > > > >i am running SER perfectly....Now i am facing problem with running >SEMS.... > > > > > >i have tried SER 0.8.12(current sems cvs update ) and 0.8.11(sems 0.11) >i > > >am unable to do anything.... > > > > > > > > >whats happening is.... > > > > > >my SER is already installed.....and working...now i am compiling it >with >vm > > >module and making Multi Domain off (in 0.8.11) and its off in 0.8.12 as >it > > >depends upon domain module there....so no problem with multidomain > > >support...so it works fine...following is the code of ser.cfg > > > > > > if(method=="ACK" || method=="INVITE" || method=="BYE"){ > > > if (!t_newtran()) { > > > log("could not create new transaction\n"); > > > sl_send_reply("500","could not create new > > >transaction"); > > > break; > > > }; > > > > > > if(!vm("/tmp/am_fifo", "voicemail")){ > > > > > > lookup("aliases"); > > > if (!uri==myself) { > > > append_hf("P-hint: outbound alias\r\n"); > > > route(1); > > > break; > > > }; > > > > > > # native SIP destinations are handled using our USRLOC >DB > > > if (!lookup("location")) { > > > sl_send_reply("404", "Not Found"); > > > break; > > > }; > > > }; > > > }; > > > > > > > > >Next....is i am compiling current version of sems...from cvs with >following > > >command > > > > > >CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/sems > > >export CVSROOT > > >cvs co answer_machine > > > > > >now it also gets compiled with one or two erros of audio file paths > > >etc...which i corrected in /etc/sems/sems.conf and enaled voicemail >module > > >in it.. > > > > > >Now when i run it sems -D 3 -E > > > > > >it shows me sems started successsfully.....but when i try and give a >call > > >so that it shud be transfered to voicemail...in sems log i see ## Wrong > > >FIFO Interface version ## > > > > > >due to which ...my wav file which is getting stored in /tmp folder is > > >having 44 bytes size always...i know there is version conflict...but i >am > > >unable to get proper matching versions of both............. > > > > > >kidly help me out...if u need i can attach any more info too... > > > > > >kapil > > > > > >_________________________________________________________________ > > >Contact brides & grooms FREE! >http://www.shaadi.com/ptnr.php?ptnr=hmltag > > >Only on www.shaadi.com. Register now! > > > > > >_______________________________________________ > > >Serusers mailing list > > >serusers(a)lists.iptel.org > > >http://lists.iptel.org/mailman/listinfo/serusers > > > > _________________________________________________________________ > > Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag > > Only on www.shaadi.com. Register now! > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > _________________________________________________________________ INDIA TODAY @ Rs. 5 + a free gift ! http://www.indiatoday.com/itoday/intlsubscription/itsubs/it_offer.html Subcribe Now ...

2 1

RE: [Serusers] SER + SEMS
by Kapil Dhawan 24 Feb '04

24 Feb '04

Hi I have got some improvement...now i am getting voicemail in my email but after sending one email...i again get Wrong FIFO and then if i restart my sems and ser...it works for one more time.......same case always >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> >To: serusers(a)lists.iptel.org >Subject: RE: [Serusers] SER + SEMS >Date: Tue, 24 Feb 2004 09:35:39 +0000 > >I have tried to debug all this > >this is what i get] >(1185) DEBUG: run (AmServer.cpp:165): version= <0.2> >(1185) DEBUG: run (AmServer.cpp:170): fct_name= <sip_request.voicemail> >(1185) DEBUG: execute (AmServer.cpp:229): cmd.method= <INVITE> >(1185) DEBUG: execute (AmServer.cpp:230): cmd.user= <1111> >(1185) DEBUG: execute (AmServer.cpp:231): cmd.email= ><kdhawan(a)primus-direct.com> >(1185) DEBUG: execute (AmServer.cpp:232): cmd.domain= <203.196.128.126> >(1185) DEBUG: execute (AmServer.cpp:233): cmd.dstip= <203.196.128.126> >(1185) DEBUG: execute (AmServer.cpp:234): cmd.port= <> >(1185) DEBUG: execute (AmServer.cpp:235): cmd.r_uri= ><sip:1111@203.196.128.126;user=phone> >(1185) DEBUG: execute (AmServer.cpp:236): cmd.from_uri= ><sip:3333@203.196.128.122:5060;user=phone;transport=udp> >(1185) DEBUG: execute (AmServer.cpp:237): cmd.from= ><<sip:3333@203.196.128.126;user=phone> > >(1185) DEBUG: execute (AmServer.cpp:238): cmd.to= ><<sip:1111@203.196.128.126;user=phone>> >(1185) DEBUG: execute (AmServer.cpp:239): cmd.callid= ><04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.122> >(1185) DEBUG: execute (AmServer.cpp:240): cmd.from_tag= <32351> >(1185) DEBUG: execute (AmServer.cpp:241): cmd.to_tag= <> >(1185) DEBUG: execute (AmServer.cpp:244): cseq_str= <8> >(1185) DEBUG: execute (AmServer.cpp:249): cseq= <8>(8) >(1185) DEBUG: execute (AmServer.cpp:251): cmd.key= <31558:1504541206> >(1185) DEBUG: execute (AmServer.cpp:252): cmd.route= <> >(1185) DEBUG: execute (AmServer.cpp:253): cmd.next_hop= <> >(1185) DEBUG: execute (AmServer.cpp:259): hdrs: `P-MsgFlags: 0 >Session-Expires: 1800 >Min-SE: 1800 >' >(1185) DEBUG: execute (AmServer.cpp:266): body: `v=0 >o=SS-TA101 23265 23265 IN IP4 203.196.128.122 >s=- >c=IN IP4 203.196.128.122 >t=0 0 >m=audio 54321 RTP/AVP 0 8 18 4 96 >a=rtpmap:0 PCMU/8000 >a=rtpmap:8 PCMA/8000 >a=rtpmap:18 G729/8000 >a=rtpmap:4 G723-63/8000 >a=rtpmap:96 telephone-event/8000 >a=fmtp:96 0-11 >' >(1185) DEBUG: execute (AmServer.cpp:277): everything is OK ! >(1185) DEBUG: onInvite (AnswerMachine.cpp:133): email address for user >'1111': kdhawan(a)primus-direct.com >(1185) DEBUG: startSession (AmSession.cpp:435): Starting session... >(hash=04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.12232351,sess_key=000004A12F57B1AE) >(1191) DEBUG: parse_sdp_attribute (AmSdp.cpp:596): unknown attribute >definition 'fmtp:96 0-11' >(1191) DEBUG: run (AmSession.cpp:124): dir=0; msg_flags=0 >(1191) DEBUG: sendToFIFO (AmRequest.cpp:199): >msg=<:vm_reply:000004A7166E92A0 >180 >ringing >31558:1504541206 >000004A12F57B1AE >Contact: <sip:1111@203.196.128.126> >. >. > >> >(1191) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: completed >(1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200 >fifo_t_reply succeeded >(1191) DEBUG: getReturnCode (AmRequest.cpp:442): n_cmd.from_uri= <> >(1191) DEBUG: getReturnCode (AmRequest.cpp:445): n_cmd.next_hop= <> >(1191) DEBUG: getReturnCode (AmRequest.cpp:448): n_cmd.route= <> >(1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns >ret=getReturnCode=0 >(1191) DEBUG: setLocalPort (AmRtpStream.cpp:129): setting random local port >(1191) DEBUG: setLocalPort (AmRtpStream.cpp:158): local rtp port set to >35226 >(1191) DEBUG: sendToFIFO (AmRequest.cpp:199): >msg=<:vm_reply:000004A756924871 >200 >OK >31558:1504541206 >000004A12F57B1AE >Contact: <sip:1111@203.196.128.126> >Content-Type: application/sdp >. >v=0 >o=username 0 0 IN IP4 203.196.128.126 >s=session >c=IN IP4 203.196.128.126 >t=0 0 >m=audio 35226 RTP/AVP 0 >a=rtpmap:0 PCMU/8000 >. > >> >(1191) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: completed >(1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200 >fifo_t_reply succeeded >(1191) DEBUG: getReturnCode (AmRequest.cpp:442): n_cmd.from_uri= <> >(1191) DEBUG: getReturnCode (AmRequest.cpp:445): n_cmd.next_hop= <> >(1191) DEBUG: getReturnCode (AmRequest.cpp:448): n_cmd.route= <> >(1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns >ret=getReturnCode=0 >(1191) DEBUG: setRAddr (AmRtpStream.cpp:321): RTP remote address set to >203.196.128.122:54321 >(1191) DEBUG: run (AmSession.cpp:143): Sending Rtp data to >203.196.128.122/54321 >(1191) DEBUG: onSessionStart (AnswerMachine.cpp:162): starting sending >announce...(/usr/local/lib/sems/audio/default.wav) >(1191) DEBUG: trying to read WAV file >(1191) DEBUG: tag = <RIFF> >(1191) DEBUG: file size = <129710> >(1191) DEBUG: tag = <WAVE> >(1191) DEBUG: tag = <fmt > >(1191) DEBUG: chunk_size = <18> >(1191) DEBUG: fmt = <01> >(1191) DEBUG: channels = <1> >(1191) DEBUG: rate = <8000> >(1191) DEBUG: bits/sample = <16> >(1191) DEBUG: tag = <fact> >(1191) DEBUG: chunk size = <4> >(1191) DEBUG: tag = <data> >(1191) DEBUG: chunk size = <129660> > > > >ERROR ERROR ERROR > >(1185) DEBUG: run (AmServer.cpp:165): version= <> >(1185) ERROR: run (AmServer.cpp:194): wrong FIFO Interface version. > > > >(1191) DEBUG: streamGet (AmAudio.cpp:479): 0-stuffing packet: adding 260 >bytes (packet size=320) >(1191) DEBUG: convert (AmAudio.cpp:208): end of stream >(1191) DEBUG: onSessionStart (AnswerMachine.cpp:164): ... announce reaches >its end. >(1191) DEBUG: onSessionStart (AnswerMachine.cpp:170): starting recording >message...(/tmp/04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.122.wav) >(1191) DEBUG: onSessionStart (AnswerMachine.cpp:173): ... finished >recording message >(1191) DEBUG: sendToFIFO (AmRequest.cpp:199): >msg=<:t_uac_dlg:000004A7326ED90A >BYE >sip:3333@203.196.128.122:5060;user=phone;transport=udp >. >From: <sip:1111@203.196.128.126;user=phone>;tag=000004A12F57B1AE >To: <sip:3333@203.196.128.126;user=phone> ;tag=32351 >CSeq: 9 BYE >Call-ID: 04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.122 >Contact: <sip:1111@203.196.128.126> >. >. > >> >(1191) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: completed >(1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 481 >Call Leg/Transaction Does Not Exist >(1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns >ret=getReturnCode=0 >(1191) ERROR: bye (AmRequest.cpp:243): AmRequest::bye: 481 Call >Leg/Transaction Does Not Exist >(1191) DEBUG: onSessionStart (AnswerMachine.cpp:179): recorded data size: 0 >(1191) DEBUG: sadSession (AmSession.cpp:309): searching for session to >destroy >(hash=04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.12232351,sess_key=000004A12F57B1AE) >(1191) DEBUG: findSession (AmSession.cpp:373): session found with key >(1191) DEBUG: destroySession (AmSession.cpp:331): sess_it != >a_sessions.end() >(1191) DEBUG: destroySession (AmSession.cpp:334): it != >sess_it->second.end() >(1191) DEBUG: destroySession (AmSession.cpp:341): session found: stopping >session >(1191) DEBUG: stopAndQueue (AmSession.cpp:289): session cleaner trying to >stop 80c8e18 >(1191) DEBUG: postEvent (AmEventQueue.cpp:47): AmEventQueue: trying to post >event >(1191) DEBUG: postEvent (AmEventQueue.cpp:55): AmEventQueue: event posted >(1191) DEBUG: destroySession (AmSession.cpp:343): session stopped and >destroyed (#sessions=0) >(1188) DEBUG: run (AmSession.cpp:242): Session cleaner starting its work >(1188) DEBUG: run (AmSession.cpp:256): session 80c8e18 has been destroyed' >(1188) DEBUG: run (AmSession.cpp:279): Session cleaner finished > > > >>From: "Kapil Dhawan" <sersavvy(a)hotmail.com> >>To: serusers(a)lists.iptel.org >>Subject: [Serusers] SER + SEMS >>Date: Tue, 24 Feb 2004 07:29:16 +0000 >> >>Hi All... >> >>i am running SER perfectly....Now i am facing problem with running >>SEMS.... >> >>i have tried SER 0.8.12(current sems cvs update ) and 0.8.11(sems 0.11) i >>am unable to do anything.... >> >> >>whats happening is.... >> >>my SER is already installed.....and working...now i am compiling it with >>vm module and making Multi Domain off (in 0.8.11) and its off in 0.8.12 as >>it depends upon domain module there....so no problem with multidomain >>support...so it works fine...following is the code of ser.cfg >> >> if(method=="ACK" || method=="INVITE" || method=="BYE"){ >> if (!t_newtran()) { >> log("could not create new transaction\n"); >> sl_send_reply("500","could not create new >>transaction"); >> break; >> }; >> >> if(!vm("/tmp/am_fifo", "voicemail")){ >> >> lookup("aliases"); >> if (!uri==myself) { >> append_hf("P-hint: outbound alias\r\n"); >> route(1); >> break; >> }; >> >> # native SIP destinations are handled using our USRLOC DB >> if (!lookup("location")) { >> sl_send_reply("404", "Not Found"); >> break; >> }; >> }; >> }; >> >> >>Next....is i am compiling current version of sems...from cvs with >>following command >> >>CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/sems >>export CVSROOT >>cvs co answer_machine >> >>now it also gets compiled with one or two erros of audio file paths >>etc...which i corrected in /etc/sems/sems.conf and enaled voicemail module >>in it.. >> >>Now when i run it sems -D 3 -E >> >>it shows me sems started successsfully.....but when i try and give a call >>so that it shud be transfered to voicemail...in sems log i see ## Wrong >>FIFO Interface version ## >> >>due to which ...my wav file which is getting stored in /tmp folder is >>having 44 bytes size always...i know there is version conflict...but i am >>unable to get proper matching versions of both............. >> >>kidly help me out...if u need i can attach any more info too... >> >>kapil >> >>_________________________________________________________________ >>Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag >>Only on www.shaadi.com. Register now! >> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers > >_________________________________________________________________ >Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag >Only on www.shaadi.com. Register now! > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers _________________________________________________________________ INDIA TODAY @ Rs. 5 + a free gift ! http://www.indiatoday.com/itoday/intlsubscription/itsubs/it_offer.html Subcribe Now ...

2 1

[Serusers] FW: Rtpproxy
by Shirley Toh 24 Feb '04

24 Feb '04

> -----Original Message----- > From: Shirley Toh > Sent: Tuesday, February 24, 2004 11:37 AM > To: SER Users (E-mail) > Subject: Rtpproxy > > Hi, > > Can anyone help me!! I am having this error on my log file when I try to > make calls. I have attached my ser.cfg. Please help!! Thanks!! > > Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20404]: ERROR: > send_rtpp_command: can't read reply from a RTP proxy > Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20413]: ERROR: > extract_body: message body has lenght zero > Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20413]: ERROR: > force_rtp_proxy: can't extract body from the message > Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20413]: ERROR: on_reply > processing failed > Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20417]: ERROR: > extract_body: message body has lenght zero > Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20417]: ERROR: > force_rtp_proxy: can't extract body from the message > Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20417]: ERROR: on_reply > processing failed > Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20417]: ERROR: > extract_body: message body has lenght zero > Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20417]: ERROR: > force_rtp_proxy: can't extract body from the message > Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20417]: ERROR: on_reply > processing failed > Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20407]: ERROR: > extract_body: message body has lenght zero > Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20407]: ERROR: > fix_nated_sdp: cannot extract body from msg! > Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20407]: ERROR: > extract_body: message body has lenght zero > Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20407]: ERROR: > force_rtp_proxy: can't extract body from the message > Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20407]: ERROR: on_reply > processing failed > > <<ser.cfg.txt>> > > regards, > shirley >

1 0

[Serusers] Accounting question
by Mike Fallows 24 Feb '04

24 Feb '04

I have installed the ser rpm under Redhat 9 and Mysql, which seems to work very well. I do have a small problem with accounting. When I modparam("acc", "db_url", "mysql://user:password@localhost/ser"), I get the following from syslog: Feb 24 10:18:03 ns-nby-ser1 ser: set_mod_param_regex: parameter <db_url> not found in module <acc> Feb 24 10:18:03 ns-nby-ser1 ser: parse error (79,64-65): Can't set module parameter Feb 24 10:18:03 ns-nby-ser1 ser: ERROR: bad config file (1 errors) Feb 24 10:18:03 ns-nby-ser1 ser: ser startup failed Any ideas? Michael Fallows

2 1

RE: [Serusers] SER + SEMS
by Kapil Dhawan 24 Feb '04

24 Feb '04

I have tried to debug all this this is what i get] (1185) DEBUG: run (AmServer.cpp:165): version= <0.2> (1185) DEBUG: run (AmServer.cpp:170): fct_name= <sip_request.voicemail> (1185) DEBUG: execute (AmServer.cpp:229): cmd.method= <INVITE> (1185) DEBUG: execute (AmServer.cpp:230): cmd.user= <1111> (1185) DEBUG: execute (AmServer.cpp:231): cmd.email= <kdhawan(a)primus-direct.com> (1185) DEBUG: execute (AmServer.cpp:232): cmd.domain= <203.196.128.126> (1185) DEBUG: execute (AmServer.cpp:233): cmd.dstip= <203.196.128.126> (1185) DEBUG: execute (AmServer.cpp:234): cmd.port= <> (1185) DEBUG: execute (AmServer.cpp:235): cmd.r_uri= <sip:1111@203.196.128.126;user=phone> (1185) DEBUG: execute (AmServer.cpp:236): cmd.from_uri= <sip:3333@203.196.128.122:5060;user=phone;transport=udp> (1185) DEBUG: execute (AmServer.cpp:237): cmd.from= <<sip:3333@203.196.128.126;user=phone> > (1185) DEBUG: execute (AmServer.cpp:238): cmd.to= <<sip:1111@203.196.128.126;user=phone>> (1185) DEBUG: execute (AmServer.cpp:239): cmd.callid= <04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.122> (1185) DEBUG: execute (AmServer.cpp:240): cmd.from_tag= <32351> (1185) DEBUG: execute (AmServer.cpp:241): cmd.to_tag= <> (1185) DEBUG: execute (AmServer.cpp:244): cseq_str= <8> (1185) DEBUG: execute (AmServer.cpp:249): cseq= <8>(8) (1185) DEBUG: execute (AmServer.cpp:251): cmd.key= <31558:1504541206> (1185) DEBUG: execute (AmServer.cpp:252): cmd.route= <> (1185) DEBUG: execute (AmServer.cpp:253): cmd.next_hop= <> (1185) DEBUG: execute (AmServer.cpp:259): hdrs: `P-MsgFlags: 0 Session-Expires: 1800 Min-SE: 1800 ' (1185) DEBUG: execute (AmServer.cpp:266): body: `v=0 o=SS-TA101 23265 23265 IN IP4 203.196.128.122 s=- c=IN IP4 203.196.128.122 t=0 0 m=audio 54321 RTP/AVP 0 8 18 4 96 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:18 G729/8000 a=rtpmap:4 G723-63/8000 a=rtpmap:96 telephone-event/8000 a=fmtp:96 0-11 ' (1185) DEBUG: execute (AmServer.cpp:277): everything is OK ! (1185) DEBUG: onInvite (AnswerMachine.cpp:133): email address for user '1111': kdhawan(a)primus-direct.com (1185) DEBUG: startSession (AmSession.cpp:435): Starting session... (hash=04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.12232351,sess_key=000004A12F57B1AE) (1191) DEBUG: parse_sdp_attribute (AmSdp.cpp:596): unknown attribute definition 'fmtp:96 0-11' (1191) DEBUG: run (AmSession.cpp:124): dir=0; msg_flags=0 (1191) DEBUG: sendToFIFO (AmRequest.cpp:199): msg=<:vm_reply:000004A7166E92A0 180 ringing 31558:1504541206 000004A12F57B1AE Contact: <sip:1111@203.196.128.126> . . > (1191) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: completed (1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200 fifo_t_reply succeeded (1191) DEBUG: getReturnCode (AmRequest.cpp:442): n_cmd.from_uri= <> (1191) DEBUG: getReturnCode (AmRequest.cpp:445): n_cmd.next_hop= <> (1191) DEBUG: getReturnCode (AmRequest.cpp:448): n_cmd.route= <> (1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns ret=getReturnCode=0 (1191) DEBUG: setLocalPort (AmRtpStream.cpp:129): setting random local port (1191) DEBUG: setLocalPort (AmRtpStream.cpp:158): local rtp port set to 35226 (1191) DEBUG: sendToFIFO (AmRequest.cpp:199): msg=<:vm_reply:000004A756924871 200 OK 31558:1504541206 000004A12F57B1AE Contact: <sip:1111@203.196.128.126> Content-Type: application/sdp . v=0 o=username 0 0 IN IP4 203.196.128.126 s=session c=IN IP4 203.196.128.126 t=0 0 m=audio 35226 RTP/AVP 0 a=rtpmap:0 PCMU/8000 . > (1191) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: completed (1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200 fifo_t_reply succeeded (1191) DEBUG: getReturnCode (AmRequest.cpp:442): n_cmd.from_uri= <> (1191) DEBUG: getReturnCode (AmRequest.cpp:445): n_cmd.next_hop= <> (1191) DEBUG: getReturnCode (AmRequest.cpp:448): n_cmd.route= <> (1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns ret=getReturnCode=0 (1191) DEBUG: setRAddr (AmRtpStream.cpp:321): RTP remote address set to 203.196.128.122:54321 (1191) DEBUG: run (AmSession.cpp:143): Sending Rtp data to 203.196.128.122/54321 (1191) DEBUG: onSessionStart (AnswerMachine.cpp:162): starting sending announce...(/usr/local/lib/sems/audio/default.wav) (1191) DEBUG: trying to read WAV file (1191) DEBUG: tag = <RIFF> (1191) DEBUG: file size = <129710> (1191) DEBUG: tag = <WAVE> (1191) DEBUG: tag = <fmt > (1191) DEBUG: chunk_size = <18> (1191) DEBUG: fmt = <01> (1191) DEBUG: channels = <1> (1191) DEBUG: rate = <8000> (1191) DEBUG: bits/sample = <16> (1191) DEBUG: tag = <fact> (1191) DEBUG: chunk size = <4> (1191) DEBUG: tag = <data> (1191) DEBUG: chunk size = <129660> ERROR ERROR ERROR (1185) DEBUG: run (AmServer.cpp:165): version= <> (1185) ERROR: run (AmServer.cpp:194): wrong FIFO Interface version. (1191) DEBUG: streamGet (AmAudio.cpp:479): 0-stuffing packet: adding 260 bytes (packet size=320) (1191) DEBUG: convert (AmAudio.cpp:208): end of stream (1191) DEBUG: onSessionStart (AnswerMachine.cpp:164): ... announce reaches its end. (1191) DEBUG: onSessionStart (AnswerMachine.cpp:170): starting recording message...(/tmp/04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.122.wav) (1191) DEBUG: onSessionStart (AnswerMachine.cpp:173): ... finished recording message (1191) DEBUG: sendToFIFO (AmRequest.cpp:199): msg=<:t_uac_dlg:000004A7326ED90A BYE sip:3333@203.196.128.122:5060;user=phone;transport=udp . From: <sip:1111@203.196.128.126;user=phone>;tag=000004A12F57B1AE To: <sip:3333@203.196.128.126;user=phone> ;tag=32351 CSeq: 9 BYE Call-ID: 04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.122 Contact: <sip:1111@203.196.128.126> . . > (1191) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: completed (1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 481 Call Leg/Transaction Does Not Exist (1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns ret=getReturnCode=0 (1191) ERROR: bye (AmRequest.cpp:243): AmRequest::bye: 481 Call Leg/Transaction Does Not Exist (1191) DEBUG: onSessionStart (AnswerMachine.cpp:179): recorded data size: 0 (1191) DEBUG: sadSession (AmSession.cpp:309): searching for session to destroy (hash=04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.12232351,sess_key=000004A12F57B1AE) (1191) DEBUG: findSession (AmSession.cpp:373): session found with key (1191) DEBUG: destroySession (AmSession.cpp:331): sess_it != a_sessions.end() (1191) DEBUG: destroySession (AmSession.cpp:334): it != sess_it->second.end() (1191) DEBUG: destroySession (AmSession.cpp:341): session found: stopping session (1191) DEBUG: stopAndQueue (AmSession.cpp:289): session cleaner trying to stop 80c8e18 (1191) DEBUG: postEvent (AmEventQueue.cpp:47): AmEventQueue: trying to post event (1191) DEBUG: postEvent (AmEventQueue.cpp:55): AmEventQueue: event posted (1191) DEBUG: destroySession (AmSession.cpp:343): session stopped and destroyed (#sessions=0) (1188) DEBUG: run (AmSession.cpp:242): Session cleaner starting its work (1188) DEBUG: run (AmSession.cpp:256): session 80c8e18 has been destroyed' (1188) DEBUG: run (AmSession.cpp:279): Session cleaner finished >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> >To: serusers(a)lists.iptel.org >Subject: [Serusers] SER + SEMS >Date: Tue, 24 Feb 2004 07:29:16 +0000 > >Hi All... > >i am running SER perfectly....Now i am facing problem with running SEMS.... > >i have tried SER 0.8.12(current sems cvs update ) and 0.8.11(sems 0.11) i >am unable to do anything.... > > >whats happening is.... > >my SER is already installed.....and working...now i am compiling it with vm >module and making Multi Domain off (in 0.8.11) and its off in 0.8.12 as it >depends upon domain module there....so no problem with multidomain >support...so it works fine...following is the code of ser.cfg > > if(method=="ACK" || method=="INVITE" || method=="BYE"){ > if (!t_newtran()) { > log("could not create new transaction\n"); > sl_send_reply("500","could not create new >transaction"); > break; > }; > > if(!vm("/tmp/am_fifo", "voicemail")){ > > lookup("aliases"); > if (!uri==myself) { > append_hf("P-hint: outbound alias\r\n"); > route(1); > break; > }; > > # native SIP destinations are handled using our USRLOC DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > }; > > >Next....is i am compiling current version of sems...from cvs with following >command > >CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/sems >export CVSROOT >cvs co answer_machine > >now it also gets compiled with one or two erros of audio file paths >etc...which i corrected in /etc/sems/sems.conf and enaled voicemail module >in it.. > >Now when i run it sems -D 3 -E > >it shows me sems started successsfully.....but when i try and give a call >so that it shud be transfered to voicemail...in sems log i see ## Wrong >FIFO Interface version ## > >due to which ...my wav file which is getting stored in /tmp folder is >having 44 bytes size always...i know there is version conflict...but i am >unable to get proper matching versions of both............. > >kidly help me out...if u need i can attach any more info too... > >kapil > >_________________________________________________________________ >Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag >Only on www.shaadi.com. Register now! > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers _________________________________________________________________ Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag Only on www.shaadi.com. Register now!

1 0

RE: [Serusers] SER + SEMS
by Kapil Dhawan 24 Feb '04

24 Feb '04

one more thing i am using this also LD_ASSUME_KERNEL=2.4.1 as i am linux 9.0 so read it in sems REDME that this variable shud be exported still same >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> >To: serusers(a)lists.iptel.org >Subject: [Serusers] SER + SEMS >Date: Tue, 24 Feb 2004 07:29:16 +0000 > >Hi All... > >i am running SER perfectly....Now i am facing problem with running SEMS.... > >i have tried SER 0.8.12(current sems cvs update ) and 0.8.11(sems 0.11) i >am unable to do anything.... > > >whats happening is.... > >my SER is already installed.....and working...now i am compiling it with vm >module and making Multi Domain off (in 0.8.11) and its off in 0.8.12 as it >depends upon domain module there....so no problem with multidomain >support...so it works fine...following is the code of ser.cfg > > if(method=="ACK" || method=="INVITE" || method=="BYE"){ > if (!t_newtran()) { > log("could not create new transaction\n"); > sl_send_reply("500","could not create new >transaction"); > break; > }; > > if(!vm("/tmp/am_fifo", "voicemail")){ > > lookup("aliases"); > if (!uri==myself) { > append_hf("P-hint: outbound alias\r\n"); > route(1); > break; > }; > > # native SIP destinations are handled using our USRLOC DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > }; > > >Next....is i am compiling current version of sems...from cvs with following >command > >CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/sems >export CVSROOT >cvs co answer_machine > >now it also gets compiled with one or two erros of audio file paths >etc...which i corrected in /etc/sems/sems.conf and enaled voicemail module >in it.. > >Now when i run it sems -D 3 -E > >it shows me sems started successsfully.....but when i try and give a call >so that it shud be transfered to voicemail...in sems log i see ## Wrong >FIFO Interface version ## > >due to which ...my wav file which is getting stored in /tmp folder is >having 44 bytes size always...i know there is version conflict...but i am >unable to get proper matching versions of both............. > >kidly help me out...if u need i can attach any more info too... > >kapil > >_________________________________________________________________ >Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag >Only on www.shaadi.com. Register now! > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers _________________________________________________________________ Oscar fever is on! It's Hollywood's biggest party. http://server1.msn.co.in/sp04/oscars/index.asp Get all the dope here.

1 0

← Newer
1
...
6
7
8
9
10
11
12
...
39
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users February 2004