April 2004 - sr-users - kamailio.org

[Serusers] Cisco ATA 186 adapter Firmware (SIP)
by Ashok Patel 15 Apr '04

15 Apr '04

Hi SER folks. I want to upgrade firmware on my cisco ATA 186 adapter from current version SIP v3.0 to v3.1 (or any latest SIP version available as of today). Does anybody know which web site provides ATA cisco 186 adapter firmware updrade version 3.1 (SIP). Currently I have SIP version 3.0 and I want to upgdare it to 3.1 or whatever is most recent version available. Please provide me some information about firmware version 3.1. at my e-mail address: ashokpatel(a)yahoo.com . Thanks in advance. -Ashok Patel ashokpatel(a)yahoo.com __________________________________ Do you Yahoo!? Yahoo! Tax Center - File online by April 15th http://taxes.yahoo.com/filing.html

2 1

[Serusers] how to found SER server works like two local exchanges
by wangji 15 Apr '04

15 Apr '04

Hi all, The SIP phones on the Ser server have two different define: Exchange 1: number is like 61691xxx as caller: when it calls to PSTN, dialing 0+PSTN number when it calls to 6169xxxx(expect 61691xxx), dialing 0+6169xxxx when it calls to 61691xxx, dialing only 1xxx as callee: wher PSTN and 6169xxxx(expect 61691xxx) calls, dialing 61691xxx when 61691xxx calls, dialing 1xxx Exchange 2: number is like 6169xxxx(expect 61691xxx) as caller: call callee's number as callee: wher PSTN and 6169xxxx(expect 61691xxx) calls, dialing 6169xxxx when 61691xxx calls, dialing 0+6169xxxx Using prefix() and rewriteuser() to make call mabye cause call-leg can not find. How to do that? Br, Wangji

1 0

[Serusers] LoadBalancer Script/Module
by Rose, John 14 Apr '04

14 Apr '04

Hi, Does anyone have some loadbalancer script/module code that I could take a look at? I know that you can load balance at the DNS level but I need to do it at the SER proxy level - as in: 1) INVITE arrives 2) route call to minimum call-count location 3) increment call-count data entry for that location 4) route call to that location 5) call progresses 6) BYE arrives 7) decrement call-count for location Sounds simple but all the intricacies and peculiarities of SIP/VoIP could cause the call-counter to get fubarred. John

1 0

[Serusers] New bugfix version of radiusclient library (0.4.2)
by Maxim Sobolev 14 Apr '04

14 Apr '04

Hi, I've just released the 0.4.2 version of radiusclient library. Main changes since 0.4.1 include: - Some changes from Debian have been merged in (suggested by Sergei Golod <rover(a)tob.ru>): + IPv6 attributes added into generic dictionary and radiusclient.h; + fixed a bug preventing from using more than one Radius server in fall-back scenario. - Restored historoc behaviour when in the absence of explicit bindaddr option in the config file operating system is trusted to assign source IP address to outgoing UDP packets according to its routing table. Previously in 0.4.x series address rerutned by gethostbyhane(hostname()) was forced as source IP address for all outgoing UDP packets. The same behaviour can be ontained by specifying `bindaddr: *' (Problem reported by Juha Heinanen <jh(a)tutpro.com>, patch by sobomax). - Added new API function: rc_avpair_log, which allows to create pretty-print representation of full radius request or response (sobomax). - Extended dictionary parser so that now it is possible to use comments at the end of the configuration lines (Jan Janak <jan(a)iptel.org>). The new version is 100% API/ABI compatible with the old one. It can be downloaded at http://developer.berlios.de/project/showfiles.php?group_id=1208. As usually bug reports and suggestions are highly appreciated. Enjoy! -Maxim

1 0

[Serusers] number reader
by R 14 Apr '04

14 Apr '04

Hi, I have ser 0.8.12 with sems 2004/01/04 on Fedora core 1. The number reader only reads the calling number, not the caller's number. Anyone had this problem before? Thanks, Richard __________________________________ Do you Yahoo!? Yahoo! Tax Center - File online by April 15th http://taxes.yahoo.com/filing.html

2 2

[Serusers] Check From-User against To-User
by Andreas Granig 14 Apr '04

14 Apr '04

Hi, I was wondering if there is a simple possibility inside ser.cfg to check if someone is trying to call herself. Or is it only possible with exec_msg where I could match SIP_HF_FROM against SIP_HF_TO or something like this? I'd need it for the vm-module to determine if someone is trying to reach his own voice box. Regards, Andy

2 1

[Serusers] rtp proxy problem
by santhosh 14 Apr '04

14 Apr '04

Hi , I am testing two cisco ATA behind NAT(using rtpproxy). Sometimes the call goes perfect but suddenly it stops.Sometimes it rings but the voice does't pass through. The logs show error connecting to the rtpproxy. I'm using RTPPROXY (1.19.2.10) and ser ( 0.8.12-tcp_nonb ). My configuration file is loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) route{ # compulsory processing of Route header fields and adding RR loose_route(); # ATA's are symmetric but don't advertise it -- force use of rport force_rport(); fix_nated_contact(); /* registration (uses rewritten contacts) */ if (method=="REGISTER") { save("location"); break; }; if (method=="INVITE") { record_route(); force_rtp_proxy(); /* set up reply processing */ t_on_reply("1"); if (method == "INVITE" || method == "CANCEL") { if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; /* set up reply processing and forward statefuly */ t_relay(); } # all incoming replies for t_onrepli-ed transactions enter here onreply_route[1] { if (status=~"2[0-9][0-9]") { fix_nated_contact(); force_rtp_proxy(); }; } Pls help me out ! thanks in advance santhosh

1 0

[Serusers] serweb doesn't send mail
by Teppo Lunnas 14 Apr '04

14 Apr '04

Hello, I have installed latest ser and serweb. Now when I try to register a new user from serweb's subscribe page by filling the form I get the following message: " Sorry, there was an error when sending mail. Please try again later." So what went wrong? Does the serweb have a built in e-mail client and how does it know the address of the smtp-server?

1 0

[Serusers] sl_send_reply warning
by Harold Workman 13 Apr '04

13 Apr '04

Hi, Im connecting to a cisco gateway, and the call looks fine, until the SER has to send an ACK. to bring the status of the call to active. When i look on my messages in the log, i am getting a message Warning: sl_sed_reply: I wont send a reply for ACK!!! what does this mean? ----------------------- Harold Workman CCNA, CCNP Cytel Communications hworkman(a)cytelcom.com Ph. 281-449-4000 x3098

2 2

[Serusers] username numeric routing
by Harold Workman 13 Apr '04

13 Apr '04

Just a quick question....I am using numerics as the username (ex. 111000001) of my hosts. I am able to make pstn calls through my pstn gateway. My question is how do i configure the routing request lock to allow ip to ip calls between two hosts. if i dial 111000002 it routes the call to the pstn instead of to the other host. here is my config so far. # ------------------------- request routing logic ------------------- route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # is it a PSTN destination? (is username nummerical and does not begin with 8?) if (uri=~"^sip:[0-79][0-9]*@") { # ... forward to gateways then; # check first to which PSTN destination the requests goes; # if it is US (prefix "1"), use the gateway 64.72.107.2... if (uri=~"^sip:1") { forward(64.72.107.2, 5060); } if (uri=~"^sip:011") { forward(64.72.107.2, 5060); } else { if (!lookup("location")) { sl_send_reply("404", "User Not Found"); log("SER: Dest User Not in location table.\n"); break; }; if (!t_relay()) { sl_reply_error(); }; break; }; } # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("sipua.cytelcom.com", "subscriber")) { www_challenge("sipua.cytelcom.com", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } -- Harold Workman CCNA, CCNP Cytel Communications hworkman(a)cytelcom.com Ph. 281-449-4000 x3098 ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

3 2

[Serusers] serweb
by John LI 13 Apr '04

13 Apr '04

Hi, When you proceeding the login, the it will also check admin user's domain name. if the domain name you set is different with the domain name of you machine, it will be failed. Suggestion: 1. check the domain name field in the subscriber table, for example, it is "my.domain.com" 2. edit /etc/ add an entry: your_IP_address my.domain.com my then reboot your machine, this problem should be resolved. good luck. BTW, I have a question: did you get the error messages like this? it seemed like can not found "prolog.html". I wonder how can i resolve this problem Warning: virtual(): Unable to include '/prolog.html' - request execution failed in /var/www/html/serweb_2004-01-04/html/page.php on line 77 ny1.signalc.com User Management Warning: virtual(): Unable to include '/separator.html' - request execution failed in /var/www/html/serweb_2004-01-04/html/page.php on line 79

3 4

Re: [Serusers] Radius ser.cfg
by William Farrgon 13 Apr '04

13 Apr '04

Hello Jan, I have solved the problems I was experiencing, basically I have started the installation and configuration from scratch. In the mean time I am expericing some problems the radius accounting. I am receiving the stop acc packet as described in http://iptel.org/ser/ser_radius.html, however I would like to receive the Acct-Session-Time in my stop packet. Is this possible ? I have installed radiusclient-0.3.2-0.rhel2.1.dag. Thank you, Regards, Wilhelm >From: Jan Janak <jan(a)iptel.org> >To: William Farrgon<wgfarr(a)hotmail.com> >CC: serusers(a)lists.iptel.org >Subject: Re: [Serusers] Radius ser.cfg >Date: Mon, 12 Apr 2004 22:25:11 +0200 > >The problem is on line 66 of the configuration file. Try to replace >if (len_gt(max_len)) >with >if (msg:len > max_len) > >Note the following line in ser output: >parse error (66,21-28): syntax error > >It tells you that the error is on line 66, columns 21-28. > > Jan. > >On 12-04 08:33, Wilhelm Farrugia wrote: > > Hello, > > > > I am trying to install ser with radius support and i have followed the > > instructions on: > > > > http://iptel.org/ser/ser_radius.html > > > > and this is my ser.cfg. > > > > > > # > > # ----------- global configuration parameters ------------------------ > > debug=3 # debug level (cmd line: -dddddddddd) > > fork=no > > log_stderror=yes # (cmd line: -E) > > #/* Uncomment these lines to enter debugging mode > > debug=7 > > fork=no > > log_stderror=yes > > #*/ > > > > check_via=no # (cmd. line: -v) > > dns=no # (cmd. line: -r) > > rev_dns=no # (cmd. line: -R) > > port=5060 > > children=4 > > fifo="/tmp/ser_fifo" > > > > # ------------------ module loading ---------------------------------- > > > > # Uncomment this if you want to use SQL database > > loadmodule "/usr/lib/ser/modules/mysql.so" > > loadmodule "/usr/local/lib/ser/modules/sl.so" > > loadmodule "/usr/local/lib/ser/modules/tm.so" > > loadmodule "/usr/local/lib/ser/modules/rr.so" > > loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > > loadmodule "/usr/local/lib/ser/modules/usrloc.so" > > loadmodule "/usr/local/lib/ser/modules/registrar.so" > > > > # Uncomment this if you want digest authentication > > # mysql.so must be loaded ! > > loadmodule "/usr/local/lib/ser/modules/auth.so" > > #loadmodule "/usr/local/lib/ser/modules/auth_db.so" > > loadmodule "/usr/local/lib/ser/modules/acc.so" > > loadmodule "/usr/local/lib/ser/modules/auth_radius.so" > > loadmodule "/usr/local/lib/ser/modules/uri_radius.so" > > > > > > # ----------------- setting module-specific parameters --------------- > > > > # -- usrloc params -- > > > > modparam("usrloc", "db_mode", 2) > > modparam("auth_radius", > > "radius_config","/usr/local/etc/radiusclient/radiusclient.conf") > > modparam("auth_radius", "service_type", 15) > > > > # -- rr params -- > > # add value to ;lr param to make some broken UAs happy > > modparam("rr", "enable_full_lr", 1) > > modparam("acc", "log_level", 1) > > #modparam("acc", "radius_flag", 1) > > > > # ------------------------- request routing logic ------------------- > > > > # main routing logic > > > > route{ > > # initial sanity checks -- messages with > > # max_forwards==0, or excessively long requests > > if (!mf_process_maxfwd_header("10")) { > > sl_send_reply("483","Too Many Hops"); > > break; > > }; > > if (len_gt( max_len )) { > > sl_send_reply("513", "Message too big"); > > break; > > }; > > > > > > > > # we record-route all messages -- to make sure that > > # subsequent messages will go through our proxy; that's > > # particularly good if upstream and downstream entities > > # use different transport protocol > > record_route(); > > # loose-route processing > > if (loose_route()) { > > t_relay(); > > break; > > }; > > > > # if the request is for other domain use UsrLoc > > # (in case, it does not work, use the following command > > # with proper names and addresses in it) > > > > if (method=="REGISTER") { > > > > log(1, "REGISTER: Authenticating user\n"); > > > > if (!radius_www_authorize("")) { > > log(1, "REGISTER: challenging user\n"); > > www_challenge("", "0"); > > break; > > }; > > save("location"); > > break; > > }; > > > > > > if (method=="INVITE") { > > > > log(1, "INVITE\n"); > > setflag(1); /* set for accounting (the same value as in > > log_flag!) */ > > }; > > > > if (method=="MESSAGE") { > > log(1, "MESSAGE\n"); > > setflag(1); /* set for accounting (the same value as in > > log_flag!) */ > > }; > > > > if (method=="BYE" || method=="CANCEL") { > > log (1, "BYE or CANCEL\n"); > > setflag(1); > > }; > > > > > > } > > > > > > > > however when I start the ser server I receive this logging: > > > > 0(959) loading module /usr/lib/ser/modules/mysql.so > > 0(959) loading module /usr/local/lib/ser/modules/sl.so > > 0(959) loading module /usr/local/lib/ser/modules/tm.so > > 0(959) loading module /usr/local/lib/ser/modules/rr.so > > 0(959) loading module /usr/local/lib/ser/modules/maxfwd.so > > 0(959) loading module /usr/local/lib/ser/modules/usrloc.so > > 0(959) loading module /usr/local/lib/ser/modules/registrar.so > > 0(959) loading module /usr/local/lib/ser/modules/auth.so > > 0(959) loading module /usr/local/lib/ser/modules/acc.so > > 0(959) loading module /usr/local/lib/ser/modules/auth_radius.so > > 0(959) loading module /usr/local/lib/ser/modules/uri_radius.so > > 0(959) set_mod_param_regex: usrloc matches module usrloc > > 0(959) set_mod_param_regex: found <db_mode> in module usrloc > > [/usr/local/lib/ser/modules/usrloc.so] > > 0(959) set_mod_param_regex: auth_radius matches module auth_radius > > 0(959) set_mod_param_regex: found <radius_config> in module auth_radius > > [/usr/local/lib/ser/modules/auth_radius.so] > > 0(959) set_mod_param_regex: auth_radius matches module auth_radius > > 0(959) set_mod_param_regex: found <service_type> in module auth_radius > > [/usr/local/lib/ser/modules/auth_radius.so] > > 0(959) set_mod_param_regex: rr matches module rr > > 0(959) set_mod_param_regex: found <enable_full_lr> in module rr > > [/usr/local/lib/ser/modules/rr.so] > > 0(959) set_mod_param_regex: acc matches module acc > > 0(959) set_mod_param_regex: found <log_level> in module acc > > [/usr/local/lib/ser/modules/acc.so] > > 0(959) find_export: found <mf_process_maxfwd_header> in module > > maxfwd_module [/usr/local/lib/ser/modules/maxfwd.so] > > 0(959) find_export: found <sl_send_reply> in module sl_module > > [/usr/local/lib/ser/modules/sl.so] > > 0(959) parse error (66,21-28): syntax error > > 0(959) parse error (66,29-30): bad arguments > > 0(959) find_export: found <sl_send_reply> in module sl_module > > [/usr/local/lib/ser/modules/sl.so] > > 0(959) find_export: found <record_route> in module rr > > [/usr/local/lib/ser/modules/rr.so] > > 0(959) find_export: found <loose_route> in module rr > > [/usr/local/lib/ser/modules/rr.so] > > 0(959) find_export: found <t_relay> in module tm > > [/usr/local/lib/ser/modules/tm.so] > > 0(959) find_export: found <radius_www_authorize> in module auth_radius > > [/usr/local/lib/ser/modules/auth_radius.so] > > 0(959) find_export: found <www_challenge> in module auth > > [/usr/local/lib/ser/modules/auth.so] > > 0(959) find_export: found <save> in module registrar > > [/usr/local/lib/ser/modules/registrar.so] > > ERROR: bad config file (2 errors) > > 0(959) DEBUG: tm_shutdown : start > > 0(959) DEBUG: tm_shutdown : empting hash table > > 0(959) DEBUG: tm_shutdown: releasing timers > > 0(959) DEBUG: tm_shutdown : removing semaphores > > 0(959) DEBUG: tm_shutdown : done > > 0(959) shm_mem_destroy > > 0(959) destroying the shared memory lock > > > > Is there a good ser.cfg file available ? > > > > Thank you, > > Regards, > > > > Wgfarr > > > > _________________________________________________________________ > > Protect your PC - get McAfee.com VirusScan Online > > http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers _________________________________________________________________ It's fast, it's easy and it's free. Get MSN Messenger today! http://www.msn.co.uk/messenger

1 0

[Serusers] ser help for config
by Shahzad Sadiq 13 Apr '04

13 Apr '04

hi, i ve installed ser and mysql on linux 6... and also made the tables and entered new users .. but the time i try to make calls i get error 408... can any one please send me the configuration of ser.cfg file ... because i think i m making a mistake there.. thanks shahzad

1 0

[Serusers] instatnt messaging and windows messenger
by alireza＠panaisp.net 12 Apr '04

12 Apr '04

Hi Everybody I installed SER and it work great but i have a little problem. i want to use windows messenger as a client.But when i login with it to SER and add another users to my friend list i do not see them online,they are realy online but user status show them offline and on another box they see me offline too, it seems there is a problem between SER and windows messenger. so users cannot send instant messege to eachother (because they are always offline). I tested both windows messenger 4.7 & 5, version 5 has another problem to delivering the messages ( i saw the SER mailinglist archive before ant found it)but on both of them users always show offline. any suggestion?what is the soloution? do you any client that can act as windows messenger and compatible with SER? Please advice Alireza

2 3

[Serusers] SER 0.8.12 and RFC
by CURRO_DOMINGUEZ 12 Apr '04

12 Apr '04

Hello all the list I'm looking some information about SER at www.iptel.org but I've found nothing. I would like to know the list of RFC that SER implements (related to SIP or SIP extensions), besides RFC3261. I think it could be interesting to add this information at the product sheet. Can you help me? Thank you very much Curro

3 2

[Serusers] Radius ser.cfg
by Wilhelm Farrugia 12 Apr '04

12 Apr '04

Hello, I am trying to install ser with radius support and i have followed the instructions on: http://iptel.org/ser/ser_radius.html and this is my ser.cfg. # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E) #/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes #*/ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/uri_radius.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 2) modparam("auth_radius", "radius_config","/usr/local/etc/radiusclient/radiusclient.conf") modparam("auth_radius", "service_type", 15) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("acc", "log_level", 1) #modparam("acc", "radius_flag", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (method=="REGISTER") { log(1, "REGISTER: Authenticating user\n"); if (!radius_www_authorize("")) { log(1, "REGISTER: challenging user\n"); www_challenge("", "0"); break; }; save("location"); break; }; if (method=="INVITE") { log(1, "INVITE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; if (method=="MESSAGE") { log(1, "MESSAGE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; if (method=="BYE" || method=="CANCEL") { log (1, "BYE or CANCEL\n"); setflag(1); }; } however when I start the ser server I receive this logging: 0(959) loading module /usr/lib/ser/modules/mysql.so 0(959) loading module /usr/local/lib/ser/modules/sl.so 0(959) loading module /usr/local/lib/ser/modules/tm.so 0(959) loading module /usr/local/lib/ser/modules/rr.so 0(959) loading module /usr/local/lib/ser/modules/maxfwd.so 0(959) loading module /usr/local/lib/ser/modules/usrloc.so 0(959) loading module /usr/local/lib/ser/modules/registrar.so 0(959) loading module /usr/local/lib/ser/modules/auth.so 0(959) loading module /usr/local/lib/ser/modules/acc.so 0(959) loading module /usr/local/lib/ser/modules/auth_radius.so 0(959) loading module /usr/local/lib/ser/modules/uri_radius.so 0(959) set_mod_param_regex: usrloc matches module usrloc 0(959) set_mod_param_regex: found <db_mode> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(959) set_mod_param_regex: auth_radius matches module auth_radius 0(959) set_mod_param_regex: found <radius_config> in module auth_radius [/usr/local/lib/ser/modules/auth_radius.so] 0(959) set_mod_param_regex: auth_radius matches module auth_radius 0(959) set_mod_param_regex: found <service_type> in module auth_radius [/usr/local/lib/ser/modules/auth_radius.so] 0(959) set_mod_param_regex: rr matches module rr 0(959) set_mod_param_regex: found <enable_full_lr> in module rr [/usr/local/lib/ser/modules/rr.so] 0(959) set_mod_param_regex: acc matches module acc 0(959) set_mod_param_regex: found <log_level> in module acc [/usr/local/lib/ser/modules/acc.so] 0(959) find_export: found <mf_process_maxfwd_header> in module maxfwd_module [/usr/local/lib/ser/modules/maxfwd.so] 0(959) find_export: found <sl_send_reply> in module sl_module [/usr/local/lib/ser/modules/sl.so] 0(959) parse error (66,21-28): syntax error 0(959) parse error (66,29-30): bad arguments 0(959) find_export: found <sl_send_reply> in module sl_module [/usr/local/lib/ser/modules/sl.so] 0(959) find_export: found <record_route> in module rr [/usr/local/lib/ser/modules/rr.so] 0(959) find_export: found <loose_route> in module rr [/usr/local/lib/ser/modules/rr.so] 0(959) find_export: found <t_relay> in module tm [/usr/local/lib/ser/modules/tm.so] 0(959) find_export: found <radius_www_authorize> in module auth_radius [/usr/local/lib/ser/modules/auth_radius.so] 0(959) find_export: found <www_challenge> in module auth [/usr/local/lib/ser/modules/auth.so] 0(959) find_export: found <save> in module registrar [/usr/local/lib/ser/modules/registrar.so] ERROR: bad config file (2 errors) 0(959) DEBUG: tm_shutdown : start 0(959) DEBUG: tm_shutdown : empting hash table 0(959) DEBUG: tm_shutdown: releasing timers 0(959) DEBUG: tm_shutdown : removing semaphores 0(959) DEBUG: tm_shutdown : done 0(959) shm_mem_destroy 0(959) destroying the shared memory lock Is there a good ser.cfg file available ? Thank you, Regards, Wgfarr _________________________________________________________________ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963

2 1

[Serusers] Authentication Problem(s)
by Chris Bookholt 12 Apr '04

12 Apr '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Greetings, My goal is to configure MSN clients to login to my SER setup such that all users are required to enter a password. I have three computers on the same LAN: two clients running MSN and a third running SER. The box running SER is also running a DNS server, defining the fictitious TLD 'team3.' In that domain I've defined several hosts, the SER server being mouse.team3. DNS appears to be working properly from all clients on the LAN because I can ping mouse.team3 from anywhere in the LAN. I've tried defining the SER domain to be either mouse.team3 or team3. (I still don't know which one is correct) I used serctl to add a few users to the domain. Then, when I try to login using said users, MSN gives the following message: "Signing in to Communications Service failed because the service is temporarily unavailable. Please try again later." However, if I comment out the following lines from ser.cfg, no authentication is done and all clients can login: if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("mouse.team3", "subscriber")) { www_challenge("mouse.team3", "0"); break; }; save("location"); break; }; I need authentication to be enabled, so this latter approach will not work. I Googled for the MSN message, but that was no help. I'm at a loss for what's wrong with those few lines. Any help would be *greatly* appreciated. Best Regards - -Chris - ----begin ser.cfg---- # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" alias="mouse.team3" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri == myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("mouse.team3", "subscriber")) { www_challenge("mouse.team3", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } - ----end ser.cfg---- - -- Chris Bookholt cgbookho(a)ncsu.edu PGP Key: http://chris.kavefish.net/pubkey.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFAdxSsaLlODofBji4RAhM0AJ4rEgEgMJtVPoDkb5uCL3SaFsD/fgCgiQLC tLwnxFz18iYu9Rv6qapnHZs= =+FMi -----END PGP SIGNATURE-----

3 2

[Serusers] nathelper module
by Graham Turner 12 Apr '04

12 Apr '04

am experiencing same issue as number of other SER users with the nathelper module - module errors on startup - parameter <ping_nated_only> not found in module nathelper previous articles suggests issue of version of nathelper.so to this end i have tried the ser-0.8.12.tbz packages (for FreeBSD 5.1) from these locations; ftp://ftp.berlios.de/pub/ser/0.8.12/packages/freebsd/5.1/i386/ ftp://ftp.berlios.de/pub/ser/latest/packages/freebsd/5.1/i386/ both with same results - can anyone provide location of updated package ?? not too sure if this is just a question of patching the nathelper.so module or does this have other dependencies ? GT

3 3

[Serusers] Re: [Serdev] SER pstn routing
by Jan Janak 12 Apr '04

12 Apr '04

If you rewrite the Request-URI of INVITE then you have to rewrite it in CANCEL as well, this is imho correct in the sample config file. Regarding t_on_failure, call t_on_failure only if the method is INVITE. Transaction module takes care of propagating the CANCEL properly, there is nothing special you need to do in the config file. Jan. On 10-04 18:16, Raymond Chen wrote: > Dear all > > > > I??ve found a problem with PSTN forwarding in the example onr.config. if a > CANCEL message is send before a call is setup to a gateway, CANCEL message > will not go through and delete the call in progress, so the callee still > rings but caller already disconnected. We can add > > > > if (method == "CANCEL") { > > setflag(1); > > t_relay(); > > break; > > }; > > > > Then it work properly. But in a t_on_failure configuration, the call still > goes to the second route even the CANCEL message is route and forwarded. Is > there any thing that we can make the CANCEL message work like it designed? > > > > Regards > > > > Ray > > _______________________________________________ > Serdev mailing list > serdev(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serdev

1 0

Re: [Serusers] ser to pstn
by Klaus Darilion 12 Apr '04

12 Apr '04

Put log() statements in your ser.cfg file and watch /var/log/messages to analyze to routing of the incoming messages. klaus james je wrote: > Hi Klaus thanks for responding, when i try the below > route{ > >>>if (uri=~"^sip:[0-9]*@192.168.1.11") { >>>forward( 192.168.1.1, 5060 ); >>>}; > > > i have attached my ser.cfg i am not sure where in the > conif i am suppose to place the route info. but > basically i get error either 404 or unknown error when > i just dial lets say 12127773456 but when i dial > 12127773456(a)192.168.2.1 then it goes through ok. > > so i am not sure if this is how it is supposed to be. > > thanks so much for your help > jim > > > --- Klaus Darilion <klaus.mailinglists(a)pernau.at> > wrote: > >>What was the problem? >> >>Klaus >> >>james je wrote: >> >>>Hello all, i configured my ser and can make sip >> >>ua--> >> >>>ua calls now need to make calls to sip gateway. >>>if someone can please provide a sample config how >> >>i >> >>>can send my calls to a cisco gateway >>>for instance 1+ calls to be sent to gateway >>>192.168.1.1 >>>and where in ser.cfg would i put that. i have >> >>tried >> >>>the below w/o luck >>># main routing logic >>> >>>route{ >>> >>>if (uri=~"^sip:[0-9]*@192.168.1.2") { >>>forward( 192.168.1.1, 5060 ); >>>}; >>>thanks >>>for your help >>> >>>__________________________________________________ >>>Do You Yahoo!? >>>Tired of spam? Yahoo! Mail has the best spam >> >>protection around >> >>>http://mail.yahoo.com >>> >>>_______________________________________________ >>>Serusers mailing list >>>serusers(a)lists.iptel.org >>>http://lists.iptel.org/mailman/listinfo/serusers >>> >>> >> > > > > > > __________________________________ > Do you Yahoo!? > Yahoo! Small Business $15K Web Design Giveaway > http://promotions.yahoo.com/design_giveaway/ > > > ------------------------------------------------------------------------ > > # > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ > # > # simple quick-start config script > # > > # ----------- global configuration parameters ------------------------ > > #debug=3 # debug level (cmd line: -dddddddddd) > #fork=yes > #log_stderror=no # (cmd line: -E) > > /* Uncomment these lines to enter debugging mode > debug=7 > fork=no > log_stderror=yes > */ > > check_via=no # (cmd. line: -v) > dns=no # (cmd. line: -r) > rev_dns=no # (cmd. line: -R) > #port=5060 > #children=4 > fifo="/tmp/ser_fifo" > > # ------------------ module loading ---------------------------------- > > # Uncomment this if you want to use SQL database > loadmodule "/usr/lib/ser/modules/mysql.so" > > loadmodule "/usr/lib/ser/modules/sl.so" > loadmodule "/usr/lib/ser/modules/tm.so" > loadmodule "/usr/lib/ser/modules/rr.so" > loadmodule "/usr/lib/ser/modules/maxfwd.so" > loadmodule "/usr/lib/ser/modules/usrloc.so" > loadmodule "/usr/lib/ser/modules/registrar.so" > loadmodule "/usr/lib/ser/modules/uri.so" > > # Uncomment this if you want digest authentication > # mysql.so must be loaded ! > loadmodule "/usr/lib/ser/modules/auth.so" > loadmodule "/usr/lib/ser/modules/auth_db.so" > > # ----------------- setting module-specific parameters --------------- > > # -- usrloc params -- > > # modparam("usrloc", "db_mode", 0) > > # Uncomment this if you want to use SQL database > # for persistent storage and comment the previous line > modparam("usrloc", "db_mode", 2) > > # -- auth params -- > # Uncomment if you are using auth module > # > modparam("auth_db", "calculate_ha1", yes) > # > # If you set "calculate_ha1" parameter to yes (which true in this config), > # uncomment also the following parameter) > # > modparam("auth_db", "password_column", "password") > > # -- rr params -- > # add value to ;lr param to make some broken UAs happy > modparam("rr", "enable_full_lr", 1) > > # ------------------------- request routing logic ------------------- > > # main routing logic > > route{ > > if (uri=~"^sip:1[0-9]*@*") { > forward( 192.168.2.1, 5060 ); > }; > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > > if ( msg:len > max_len ) { > #if (len_gt( max_len )) { > sl_send_reply("513", "Message too big"); > break; > }; > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > record_route(); > # loose-route processing > if (loose_route()) { > t_relay(); > break; > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (uri==myself) { > > if (method=="REGISTER") { > > # Uncomment this if you want to use digest authentication > if (!www_authorize("192.168.2.11", "subscriber")) { > www_challenge("192.168.2.11", "0"); > break; > }; > > save("location"); > break; > }; > > # native SIP destinations are handled using our USRLOC DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > # forward to current uri now; use stateful forwarding; that > # works reliably even if we forward from TCP to UDP > if (!t_relay()) { > sl_reply_error(); > }; > > }

1 0

[Serusers] dial plan
by gaillac harry 12 Apr '04

12 Apr '04

Hello, Anybody could explain me how to build a dial plan? For example I suscribe isdn channels with Dids numbers 0 123 456 *** a incoming call from my sip/pstn; 0 123 456 001 is forwarded to Ser sip proxy. What's the right account configuration in order to ear the telephone ringing ? Could you send me back ser.cfg examples? Regards Harry

1 0

Re: [Serusers] Assistance in Building SER ( Any help is appreciated)
by alireza＠panaisp.net 11 Apr '04

11 Apr '04

put your RH cd to your cdrom and upgrade it and install all the packages that you want like php mysql gcc,... from RH cds. > > Hi, > > > I am trying to build an SER, and have installed Linux RedHat 9 on a > Toshiba Intel Celeron Laptop. After installing Linux I went to HOWTO > Install SER, where it sets the requirements of SER. For someone who is > extremely very new to Linux, below is all new, however I have downloaded > everything upto PHP, MySQL-PHP, have tried looking for libmysqlclient, > not sure where I can find this. > > > The problem I am facing is with installation of the requirements below, > I have tried to install GCC for last three days, and I really have not > been able to get my head round it. > > > I really would appreciate it if you could spare some time and point me > in the right direction, of how t proceed further. I am more of a > wireless person with very basic UNIX/Linux skills. > > > Any assistance will be highly appreciated. > > > Many Thanks > > > Requirements > > > * gcc or icc : gcc >= 2.9x; >=3.1 recommended (it will work with > older version but it might require some options tweaking for best > performance) > > * bison or yacc (Berkley yacc) > > * flex > > * GNU make (on Linux this is the standard "make", on FreeBSD and > Solaris is called "gmake") > > * sed and tr (used in the make files) > > * GNU tar ("gtar" on Solaris) and gzip if you want "make tar" to > work. > > * GNU install or BSD install (on Solaris "ginstall") if you want > "make install", "make bin", "make sunpkg" to work. > > * "mysql" if you need MySQL support. > > * "Apache (httpd)" if you want serweb support > > * "PHP, MySQL-PHP" for serweb support > > * libmysqlclient & libz (zlib) if you want mysql support (the > mysql module) > > * libexpat if you want the jabber gateway support (the jabber > module) > > Best regards > > > > Saber Fakih > > Simple Clear Communicate > > GSM Tel(: +44 (0) 7775840875 > > SIP Tel (: +44 (0) 7059202419 > > Email*: saber(a)ipaxiom.com > > msn: saber(a)ipaxiom.com > > Mobile Internet is just a click away > ======================================================================== > ==================================================================== > This message is confidential and is for the named recipient (s) only. It > may be subject to legal privilege. If you receive this message but are > not named recipient or a person responsible for delivering it to a named > recipient, please contact us immediately. You must not use, distribute, > copy, disclose or take any action in reliance on the e-mail or its > contents. > ======================================================================== > ==================================================================== > > > > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

[Serusers] ser to pstn
by james je 11 Apr '04

11 Apr '04

Hello all, i configured my ser and can make sip ua--> ua calls now need to make calls to sip gateway. if someone can please provide a sample config how i can send my calls to a cisco gateway for instance 1+ calls to be sent to gateway 192.168.1.1 and where in ser.cfg would i put that. i have tried the below w/o luck # main routing logic route{ if (uri=~"^sip:[0-9]*@192.168.1.2") { forward( 192.168.1.1, 5060 ); }; thanks for your help __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

3 2

[Serusers] sl_send_reply not allowed in failure_route
by Juha Heinanen 11 Apr '04

11 Apr '04

i tried something like this: failure_route [1] { if (t_check_status("486")) { # busy rewriteuri("sip:foo@bar.com"); sl_send_reply("302", "Moved Temporarily"); break; }; } and got parse error (sl_send_reply line,xx-yy): Command cannot be used in the block what is the proper way of doing redirect on busy? -- juha

1 1

[Serusers] SER pstn routing
by Raymond Chen 10 Apr '04

10 Apr '04

Dear all I’ve found a problem with PSTN forwarding in the example onr.config. if a CANCEL message is send before a call is setup to a gateway, CANCEL message will not go through and delete the call in progress, so the callee still rings but caller already disconnected. We can add if (method == "CANCEL") { setflag(1); t_relay(); break; }; Then it work properly. But in a t_on_failure configuration, the call still goes to the second route even the CANCEL message is route and forwarded. Is there any thing that we can make the CANCEL message work like it designed? Regards Ray

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2004