April 2004 - sr-users - kamailio.org

[Serusers] DNS SRV RR : zone file: Help
by Saber Fakih 26 Apr '04

26 Apr '04

Hi, I am have managed to create the zone file, (sipserver.ipaxiom.com) and have tried running the command [root@sipserver saber]# dig -t SRV _sip._udp.sipserver.ipaxiom.com ; <<>> DiG 9.2.1 <<>> -t SRV _sip._udp.sipserver.ipaxiom.com ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 38430 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;_sip._udp.sipserver.ipaxiom.com. IN SRV ;; Query time: 19 msec ;; SERVER: 81.86.193.6#53(81.86.193.6) ;; WHEN: Sun Apr 25 23:08:32 2004 ;; MSG SIZE rcvd: 49 as you can see u I do not get the answer from the server. I am may have done something wrong, I have included the sipserver.ipaxiom.com.zone file You may be able to point me in the right direction. below is the zone file [root@sipserver saber]# more /var/named/sipserver.ipaxiom.com.zone sipserver.ipaxiom.com 86400 IN SOA sipserver.ipaxiom.com. customercare.ipaxiom.com ( 1998111908 ; serial 36000 ; refresh 900 ; retry 36000 ; expire 28800 ; minimum ) IN NS sipserver.ipaxiom.com. IN A 81.86.193.8 ; _sip._udp SRV 0 0 5060 gateway.sipserver.ipaxiom.com. gateway IN A 81.86.193.8 www IN CNAME gateway.sipserver.ipaxiom.com. Hope to hear from you soon. many thanks Best Regards Saber email: saber(a)ipaxiom.com IPaXiom Communications

2 1

[Serusers] Maximum Call Duration
by Peter Rex Drescher 26 Apr '04

26 Apr '04

Due to a known limitation in the Cisco IOS, it is not possible to restrict the duration of a call on a Cisco gateway. Since I have been hit by this a couple of times - one time having 6 timeslots on an E1 open for 3 days - I would like to hear any suggestions on how to remedy this utilizing the SER. Feel free... :-) Sincerely, Peter

3 2

[Serusers] [Question]:module nathelper
by jimmy huang 26 Apr '04

26 Apr '04

Hi : I have download the latest ser and all modules with CVS (2004/04/21) i still testing the same environment with nathelper , rtpproxy UA 1(kphone 3.14) -> NAT -> Ser <- UA 2 (kphone 3.14) UA1 can register to ser with public (after NAT ) correctly , but when UA 2 INVITE UA1 When UA1 reply 200 OK with SDP Ser seems not modify the SDP to public ip and port so when UA2 receive SDP , it still can't know or should say it can't send rtp to correct IP:port it seems my config has some bug , so sdp has not been modify ?? can any one give my any ideas? and in this scenario , is ser modify the sdp to force UA to send rtp to ser then rtpproxy will handle the both UAs' rtp to transport to the both UAs? these are my ser.cfg refered from (http://www.informatik.uni-bremen.de/~prelle/terena/cookbook/main/ch04s07.ht ml ) ============================================================================ # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) #/* Uncomment these lines to enter debugging mode debug=7 #fork=no log_stderror=yes #*/ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" #++++++++++ jimmy added ++++++++++++++++++ loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" #---------------------------------------------------- # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- #++++++++++ jimmy added ++++++++++++++++++ #we will you flag 6 to mark NATed contacts modparam("registrar","nat_flag",6) #Enable NAT pinging modparam("nathelper","natping_interval",3) #ping only contacts that are known to be behind NAT modparam("nathelper","ping_nated_only",1) #---------------------------------------------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ #++++++++++ jimmy added ++++++++++++++++++ if(nat_uac_test("3")) { if((method == "REGISTER") || !(search("^Record-Route:"))) { log("LOG:Someone trying to register from private IP, rewriting\n"); fix_nated_contact(); if(method == "INVITE") { #+++++ log("+++++++++++++++++++++++++++++++++++++\n"); log("method==invite , so fix+nated_sdp\n"); log("+++++++++++++++++++++++++++++++++++++\n"); #----- fix_nated_sdp("1"); }; force_rport(); setflag(6); }; }; #---------------------------------------------------- # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } #++++++++++ jimmy added +++++++++++++++++++++ route[1] { if(uri=~"[@:](192\.168\.|10\.|172\.16)" && !search("^Route:")) { sl_send_reply("479","we don't forward to private IP address"); break; }; if(isflagset(6)) { force_rtp_proxy(); t_on_reply("1"); append_hf("P-Behind-NAT: Yes\r\n"); } if(!t_relay()) { sl_reply_error(); break; } } onreply_route[1] { if(status =~ "(183)|2[0-9][0-9]") { fix_nated_contact(); force_rtp_proxy(); }; } #---------------------------------------------------- ============================================================================ thanks Jimmy

1 0

[Serusers] Bug-report: ser_mysql.sh, Error 1054
by Bernie Hoeneisen 26 Apr '04

26 Apr '04

In the current CVS unstable version there seams to be a bug in the ser_mysql.sh: I have tried to upgrade from my stable 0.8.12 to the CVS unstable and found the following issues: bhoeneis@wil:~/ser/sip_router$ scripts/ser_mysql.sh reinstall MySql password for root: creating backup database dumping table content (ser) dropping table (ser) creating new structures creating database ser ... restoring table content ERROR 1054 at line 42: Unknown column 'usernamename' in 'field list' reinstall: restoring table failed I solved this by commenting out the following line in ser_mysql.sh # sed "s/[uU][sS][eE][rR]/$USERCOL/g" | But then thow following error came as next after running the "fixed" ser_mysql.sh: ERROR 1054 at line 108: Unknown column 'perms' in 'field list' This one I circumvented by inserting a line, which does replace all the strings perms by rpid as follows: sed "s/[uU][sS][eE][rR]_[iI][dD]/user/g" $tmp_file | # sed "s/[uU][sS][eE][rR]/$USERCOL/g" | sed "s/[pP][eE][rR][mM][sS]/rpid/g" | sed "s/[rR][eE][aA][lL][mM]/domain/g"> ${tmp_file}.2 After running it again I executed the following in the mysql client: update subscriber set rpid="NULL" where rpid !="NULL" I hope someone can fix this once... and that my fix really helps...;-) cheers, Bernie PS: Here the diff for a quick and dirty fix: bhoeneis@wil:~/ser/sip_router$ cvs diff -u scripts/ser_mysql.sh Index: scripts/ser_mysql.sh =================================================================== RCS file: /cvsroot/ser/sip_router/scripts/ser_mysql.sh,v retrieving revision 1.52 diff -u -r1.52 ser_mysql.sh --- scripts/ser_mysql.sh 13 Apr 2004 19:14:32 -0000 1.52 +++ scripts/ser_mysql.sh 20 Apr 2004 17:39:49 -0000 @@ -697,7 +697,8 @@ exit 1 fi sed "s/[uU][sS][eE][rR]_[iI][dD]/user/g" $tmp_file | - sed "s/[uU][sS][eE][rR]/$USERCOL/g" | + # sed "s/[uU][sS][eE][rR]/$USERCOL/g" | + sed "s/[pP][eE][rR][mM][sS]/rpid/g" | sed "s/[rR][eE][aA][lL][mM]/domain/g"> ${tmp_file}.2 #3 drop original database echo "dropping table ($DBNAME)"

2 4

[Serusers] SEMS fifo_server errors
by lakmal＠lankacom.net 26 Apr '04

26 Apr '04

Hi, I managed to get rid of the Wrong FIFO Interface version. Now I'm getting these errors on /var/log/messages and in sems debug mod, when making a call with the same configuration. Is it again due to a problem in versrion? The the sems is downloaded from ftp site and is sems_2004_01_04.tar.gz. I tried this with ser downloaded via cvs and the one from the ftp site. Any ideas? Apr 25 09:16:06 compaq2 ser[30320]: ERROR: fifo_server: command vm_reply is not available Apr 25 09:16:06 compaq2 ser[30320]: ERROR: fifo_server: command must have at least 3 chars Apr 25 09:16:06 compaq2 ser[30320]: ERROR: fifo_server: command must begin with :: 000076B70A6C036D Apr 25 09:16:06 compaq2 ser[30320]: ERROR: fifo_server: command must begin with :: Content-Type: application/sdp Apr 25 09:16:06 compaq2 ser[30320]: ERROR: fifo_server: command must begin with :: v=0 Apr 25 09:16:06 compaq2 ser[30320]: ERROR: fifo_server: command must begin with :: s=session Apr 25 09:16:06 compaq2 ser[30320]: ERROR: fifo_server: command must begin with :: t=0 0 Apr 25 09:16:06 compaq2 ser[30320]: ERROR: fifo_server: command must begin with :: a=rtpmap:3 gsm/8000 Apr 25 09:16:06 compaq2 ser[30320]: ERROR: fifo_server: command vm_reply is not available Apr 25 09:16:06 compaq2 ser[30320]: ERROR: fifo_server: command must begin with :: could not send response. Apr 25 09:16:06 compaq2 ser[30320]: ERROR: fifo_server: command must begin with :: 000076B70A6C036D Apr 25 09:16:06 compaq2 ser[30320]: ERROR: fifo_server: command must have at least 3 chars --------------------------------------------------------------------- sems debug mode shows this --------------------------------------------------------------------- v=0 o=username 0 0 IN IP4 24.248.99.200 s=session c=IN IP4 24.248.99.200 t=0 0 m=audio 39340 RTP/AVP 3 a=rtpmap:3 gsm/8000 . > (30452) DEBUG: openReplyFifo (AmRequest.cpp:358): flags=800 (30452) DEBUG: openReplyFifo (AmRequest.cpp:360): flags=0 (30452) DEBUG: write_to_fifo (AmRequest.cpp:702): Write to fifo: completed (30452) DEBUG: getReturnCode (AmRequest.cpp:413): response from Ser: 500 command 'vm_reply' not available (30452) DEBUG: sendToFIFO (AmRequest.cpp:213): sendToFifo returns ret=getReturnCode=0 (30452) ERROR: reply (AmRequest.cpp:309): AmRequestUAS::reply: 500 command 'vm_reply' not available (30452) ERROR: run (AmSession.cpp:155): 500 could not send response. (30452) DEBUG: sendToFIFO (AmRequest.cpp:194): msg=<:vm_reply:000076F4226615DC 500 could not send response. 58537:73151574 000076B70A6C036D Contact: <sip:1001@24.248.99.200:5090> . . > (30452) DEBUG: openReplyFifo (AmRequest.cpp:358): flags=800 (30452) DEBUG: openReplyFifo (AmRequest.cpp:360): flags=0 (30452) DEBUG: write_to_fifo (AmRequest.cpp:702): Write to fifo: completed (30452) DEBUG: getReturnCode (AmRequest.cpp:413): response from Ser: 500 command 'vm_reply' not available (30452) DEBUG: sendToFIFO (AmRequest.cpp:213): sendToFifo returns ret=getReturnCode=0 (30452) ERROR: reply (AmRequest.cpp:309): AmRequestUAS::reply: 500 command 'vm_reply' not available (30452) DEBUG: sadSession (AmSession.cpp:305): searching for session to destroy (hash=AF821C77-9705-11D8-AA55-00A0C9703D22(a)203.143.58.1931664479517,sess_key=000076B70A6C036D) (30452) DEBUG: findSession (AmSession.cpp:369): session found with key (30452) DEBUG: destroySession (AmSession.cpp:327): sess_it != a_sessions.end() (30452) DEBUG: destroySession (AmSession.cpp:330): it != sess_it->second.end() (30452) DEBUG: destroySession (AmSession.cpp:337): session found: stopping session (30452) DEBUG: stopAndQueue (AmSession.cpp:285): session cleaner trying to stop 80c7b30 (30452) DEBUG: postEvent (AmEventQueue.cpp:47): AmEventQueue: trying to post event (30452) DEBUG: postEvent (AmEventQueue.cpp:55): AmEventQueue: event posted (30452) DEBUG: destroySession (AmSession.cpp:339): session stopped and destroyed (#sessions=0) (30394) DEBUG: run (AmSession.cpp:238): Session cleaner starting its work (30394) DEBUG: run (AmSession.cpp:252): session 80c7b30 has been destroyed' (30394) DEBUG: run (AmSession.cpp:275): Session cleaner finished ----------------------------------------------------------------------- Regards, Lakmal Lankacom Services (Pvt) Ltd. 65C, Dharmapala Mawatha, Colombo 07. Sri Lanka. Tel: +94-1-437545 www.lankacom.net

1 0

[Serusers] SUBSCRIBE/NOTIFY and SCS-Client; SER sends wrong To header field
by Axel Böger 25 Apr '04

25 Apr '04

Hi, I've tried to test the pa module (ser 0.8.12) in conjunction with the SCS Client. The SCS Client appends a special generic param: 'ScsId=ch' at the From: header in the subscribe message. And the NOTIFY answer from ser contains this param but omits the semicolon. So the NOTIFY message will be treated as wrong. The ser config for SUBSCRIBE method is straight forward: if (method=="SUBSCRIBE") { if (t_newtran()) { handle_subscription("registrar"); }; }; # subscribe The ngrep output for this transaction is: # U 195.4.20.71:5060 -> 194.97.99.50:5060 SUBSCRIBE sip:snom@fn-sip.mcbone.net SIP/2.0..Via: SIP/2.0/UDP 195.4.20.71. .To: sip:snom@fn-sip.mcbone.net..From: <sip:aboeger@fn-sip.mcbone.net>;tag =11b78ed1b717552;ScsId=ch..Call-ID: dc8b5b893e68391d9b2dfc807f8e3ba2..CSeq: 1325665313 SUBSCRIBE..Max-Forwards: 70..Contact: sip:195.4.20.71..Event: p resence..Expires: 3600..Content-Length: 0..User-Agent: SCS/v3.1.12.33.... # U 194.97.99.50:5060 -> 195.4.20.71:5060 SIP/2.0 200 OK..Via: SIP/2.0/UDP 195.4.20.71..To: sip:snom@fn-sip.mcbone.ne t;tag=91083b2aa33cb6d5c9260125dc95d5f0-efd4..From: <sip:aboeger@fn-sip.mcb one.net>;tag=11b78ed1b717552;ScsId=ch..Call-ID: dc8b5b893e68391d9b2dfc807f8 e3ba2..CSeq: 1325665313 SUBSCRIBE..Server: Sip EXpress router (0.8.12a (i38 6/linux))..Content-Length: 0..Warning: 392 194.97.99.50:5060 "Noisy feedbac k tells: pid=26439 req_src_ip=195.4.20.71 req_src_port=5060 in_uri=sip:sno m(a)fn-sip.mcbone.net out_uri=sip:snom@fn-sip.mcbone.net via_cnt==1".... # U 194.97.99.50:5060 -> 195.4.20.71:5060 NOTIFY sip:195.4.20.71 SIP/2.0..Via: SIP/2.0/UDP 194.97.99.50;branch=z9hG4b K6d55.e01a2e91.0..To: <sip:aboeger@fn-sip.mcbone.net>ScsId=ch;tag=11b78ed1b 717552..From: sip:snom@fn-sip.mcbone.net;tag=91083b2aa33cb6d5c9260125dc95d5 f0-efd4..CSeq: 1 NOTIFY..Call-ID: dc8b5b893e68391d9b2dfc807f8e3ba2..Content -Length: 302..User-Agent: Sip EXpress router(0.8.12a (i386/linux))..Event: presence..Content-Type: application/xpidf+xml..Subscription-State: active;e xpires=3600....<?xml version="1.0"?>..<!DOCTYPE presence PUBLIC "//IETF//DT D RFCxxxx XPIDF 1.0//EN" "xpidf.dtd">..<presence>..<presentity uri="sip:sno m(a)fn-sip.mcbone.net;method=SUBSCRIBE"/>..<atom id="9r28r49">..<address uri= "sip:snom@fn-sip.mcbone.net">..<status status="closed"/>..</address>..</ato m>..</presence>.. # U 195.4.20.71:5060 -> 194.97.99.50:5060 SIP/2.0 400 Syntax Error..Call-ID: dc8b5b893e68391d9b2dfc807f8e3ba2..CSeq: 1 NOTIFY..From: sip:snom@fn-sip.mcbone.net;tag=91083b2aa33cb6d5c9260125dc95 d5f0-efd4..Via: SIP/2.0/UDP 194.97.99.50;branch=z9hG4bK6d55.e01a2e91.0..Con tent-Length: 136..Content-Type: text/plain....While parsing "To": header ex pected CRLF.. Missing or invalid To header.. Missing or invalid To header.. Missing or invalid To header.. # For me it seems to be an error in ser. Have anyone an idea for a workaround? Regards, Axel

2 1

[Serusers] make prefix=/non/usr/local install
by Dmitry Semyonov 25 Apr '04

25 Apr '04

Hello. There is a mess with 'prefix' argument to 'make install' (as suggested by INSTALL text) in stable CVS version. SER is installed in correct place, but is still trying to search ser.cfg in /usr/local/etc/ser/ by default. This happens due to the fact that the default value of $prefix (/usr/local) is used (CFG_DIR = $cfg-target = $prefix/$cfg-dir) during compilation (when no prefix is given). So, installing to different location with 'make prefix=xxx install' produces the mess. Probably, the described issue affects other pieces of software. Workaround: always use make command with your prefix=xxx argument, i.e. $ make prefix=/my/prefix all; sudo make prefix=/my/prefix install Could anybody fix the problem? (At least in INSTALL file.) ...Bye..Dmitry.

2 1

Re: [Serusers] problems with restarting ser / ser.cfg solved
by 'Jan Janak' 25 Apr '04

25 Apr '04

Please always CC the list, comments inline: On 25-04 18:42, Saber Fakih wrote: > Thanks Jan, > > I traced where the problem was, with regards to the ser.cfg ser restarts > fine thanks. > > I am now trying to work on the zone file, quick question; would I be > editing, the localhost.zone file in /var/named using vi or is there an > easy way of doing it, how would I set this, any ideas. I am looking for > this info. > > _sip._udp SRV 0 0 5060 gateway.mydomain.com > Why don't you read the documentation first ?, See http://iptel.org/ser/doc/ser-howto/ser-Howto.html#AEN132 > Another thing I tried logging in using WM 4.7, does not recognise my > server (sipserver.ipaxiom.com), hence entered the IP and it found the > server, however when enter the user details I get is signing in session > for a while which then times out. Is what I should be expecting?? Any > ideas. This is a known issue with WM, digest realm must be equal to the domain part of From/To URI, this is not the case when you use IP address. Jan.

1 0

[Serusers] SEMS/SER Wrong FIFO Interface version
by lakmal＠lankacom.net 25 Apr '04

25 Apr '04

Hi, I'm trying to implement voicemail with ser_0.8.12 and sems_0.1.0 on the same machine. All servers seem to be running alright, but when I dial a user who's voicemail option is enabled, and is offline, the xlite displays "trying" for a while and then 408 request timeout. The logs in /var/log/messages says Error: ## Wrong FIFO Interface version ## Any idea about this? Configurations are as follows. voicemail.cfg ------------------------------------------------------------------------------------- check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5090 children=4 fifo="/tmp/vm_ser_fifo" fifo_mode=438 alias=eagle.lankacom.net alias=203.143.0.120 # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/vm.so" # ----------------- setting module-specific parameters --------------- modparam("voicemail", "db_url","mysql://ser:heslo@localhost/ser") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len>= max_len) { sl_send_reply("513", "Message too big"); break; }; if (!uri==myself) { sl_send_reply("404", "not reponsible for host in r-uri"); break; }; # Voicemail specific configuration - begin if(method=="ACK" || method=="INVITE" || method=="BYE"){ if (!t_newtran()) { log("could not create new transaction\n"); sl_send_reply("500","could not create new transaction"); break; }; t_reply("100","Trying -- just wait a minute !"); if(method=="INVITE"){ log("**************** vm start - begin ******************\n"); if (uri=~"sip:*@*" || uri=~"sip:*@*") { if (!vm("/tmp/am_fifo", "announcement")) { log("couldn't contact announcement server\n"); t_reply("500", "couldn not contact announcement server"); }; } else { if(!vm("/tmp/am_fifo","voicemail")){ log("could not contact the answer machine\n"); t_reply("500","could not contact the answer machine"); }; }; log("**************** vm start - end ******************\n"); } else if(method=="BYE"){ log("**************** vm end - begin ******************\n"); if(!vm("/tmp/am_fifo","bye")){ log("could not contact the answer machine\n"); t_reply("500","could not contact the answer machine"); }; log("**************** vm end - end ******************\n"); }; break; }; if (method=="CANCEL") { sl_send_reply("200", "cancels are junked here"); break; }; sl_send_reply("501", "method not understood here"); } --------------------------------------------------------------------------------------- vm_proxy.cfg --------------------------------------------------------------------------------------- alias=eagle.lankacom.net alias=203.143.0.120 loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/group.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # time to give up on ringing -- global timer, applies to # all transactions modparam("tm", "fr_inv_timer", 90) # database with user group membership modparam("group", "db_url", "mysql://ser:heslo@localhost/ser") # --------------------- request routing logic ------------------- route { if (!mf_process_maxfwd_header("10")) { log("LOG: Too many hops\n"); sl_send_reply("483", "Alas Too Many Hops"); break; }; if (!(method=="REGISTER")) record_route(); if (loose_route()) { t_relay(); break; }; if (!uri==myself) { t_relay(); break; }; if (method == "REGISTER") { if (!save("location")) { sl_reply_error(); }; break; }; # does the user wish redirection on no availability? (i.e., is he # in the voicemail group?) -- determine it now and store it in # flag 4, before we rewrite the flag using UsrLoc if (is_user_in("Request-URI", "voicemail")) { setflag(4); };# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { # handle user which was not found route(4); break; }; # if user is on-line and is in voicemail group, enable redirection if (method == "INVITE" && isflagset(4)) { t_on_failure("1"); }; t_relay(); } # ------------- handling of unavailable user ------------------ route[4] { # non-Voip -- just send "off-line" if (!(method == "INVITE" || method == "ACK" || method == "CANCEL")) { sl_send_reply("404", "Not Found"); break; }; # not voicemail subscriber if (!isflagset(4)) { sl_send_reply("404", "Not Found and no voicemail turned on"); break; }; # forward to voicemail now # rewritehostport("eagle.lankacom.net:5090"); # t_relay_to_udp("eagle.lt_relay_to_udp( "eagle.lankacom.net", "5090" ); break; } failure_route[1] { revert_uri(); rewritehostport("eagle.lankacom.net:5090"); append_branch(); t_relay_to_udp("eagle.lankacom.net", "5090"); } Regards, Lakmal Lankacom Services (Pvt) Ltd. 65C, Dharmapala Mawatha, Colombo 07. Sri Lanka. Tel: +94-1-437545 www.lankacom.net

2 2

[Serusers] nat and rtpproxy/mediaproxy
by Richard 25 Apr '04

25 Apr '04

Hi, I looked at the archieve and tried to find a solution for natted clients in a carrier environment. I have to say I am clear as mud. In our senario, some clients are behind nat, while others are not. Clients may move between nat and no-nat. What's the best approach to rtpproxy/mediaproxy. In rtpproxy's readme, it uses "search" to find certain client. It has issues to support other clients. Is nat_uac_test/client_nat_test sufficient to test either src or dest is behind nat and should go through media proxy? What if some clients have stun support? What if some are behind symmetric NAT and some are not? Thanks for your help. Richard __________________________________ Do you Yahoo!? Yahoo! Photos: High-quality 4x6 digital prints for 25� http://photos.yahoo.com/ph/print_splash

2 1

[Serusers] problems with restarting ser / ser.cfg
by Saber Fakih 25 Apr '04

25 Apr '04

I have one quick question with regards to ser.cfg I have just uncommented all of these lines below, - loadmodule "/usr/lib/ser/modules/mysql.so" - loadmodule "/usr/lib/ser/modules/auth.so" - loadmodule "/usr/lib/ser/modules/auth_db.so" - modparam("usrloc", "db_mode", 0) - modparam("usrloc", "db_mode", 2) - modparam("auth", "calculate_ha1", yes) - modparam("auth_db", "password_column", "password") - if (!www_authorize("sipserver.ipaxiom.com", "subscriber")) { www_challenge("sipserver.ipaxiom.com", "0"); break; }; After having done the above, I tried restarting ser and get an error message, ser failed ERROR: bad config file (2 errors. In var/log/messages I get error messages sipserver ser: parse error (126,1-1): syntax error sipserver ser: parse error (126,1-1): bad command. Now if I comment these lines in the ser.cfg then everything works well. - if (!www_authorize("sipserver.ipaxiom.com", "subscriber")) { www_challenge("sipserver.ipaxiom.com", "0"); Am I missing out on something or there something I am not doing right, hostname of the linux machine as you can see is sipserver.ipaxiom.com I have been googling for the above error message, with no luck. Would appreciate if the ser folks could point me in the right directions Thanks in Advance Best regards Saber Technical Director GSM Tel(: +44 (0) 7775840875 Email*: saber(a)ipaxiom.com msn: saber(a)ipaxiom.com Mobile Internet is just a click away ======================================================================== ==================================================================== This message is confidential and is for the named recipient (s) only. It may be subject to legal privilege. If you receive this message but are not named recipient or a person responsible for delivering it to a named recipient, please contact us immediately. You must not use, distribute, copy, disclose or take any action in reliance on the e-mail or its contents. ======================================================================== ====================================================================

2 1

[Serusers] bug at serctl
by Ahmed Nihad 25 Apr '04

25 Apr '04

Hi i got some bug at serctl like when i do serctl to see contacts at memory, i don't recieve any output, So how i fix that? Thanks

2 3

[Serusers] Radius Acct-Status-Type = Failed
by Harold Workman 25 Apr '04

25 Apr '04

Hi, How do i go about fixing this so that it shows Start and Stop instead of Failed? Acct-Status-Type = Failed Service-Type = IAPP-Register Attr-102 = 0x00000198 Attr-101 = 0x00000001 User-Name = "1111001000(a)cytelcom.com" Calling-Station-Id = "sip:1111001000@cytelcom.com" Called-Station-Id = "sip:54691@cytelcom.com" -- Harold Workman CCNA, CCNP Cytel Communications hworkman(a)cytelcom.com Ph. 281-449-4000 x3098 ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

2 1

[Serusers] SerWeb login issues
by AJ Grinnell 25 Apr '04

25 Apr '04

I am having nothing but problems with Ser so far. Not sure what Im doing wrong, but I am guessing that someone here can help. First problem is Ser seems to lock up a lot when starting or stoping. I get the message "ser is dead but subsys locked. When I do get it running, I cant login via serweb to either the user interface or the admin interface. I keep getting "Bad user name or password". The users are there, I can see them in the database. I am running serweb on another machine, but the machine is still able to connect to the mysql db. What I am going for here is to use Ser as a sip proxy along with asterisk and a Cisco AS5350 as the PSTN gateway. Anybody have some insight as to what is going on here?

2 1

[Serusers] ser under windows
by zhou jie 25 Apr '04

25 Apr '04

Hi, has anyboby installed and run SER under Windows successfully? zhou

5 4

Re: [Serusers] NAT Solution
by Kapil Dhawan 25 Apr '04

25 Apr '04

Hi i checked it and implemented rtpproxy also.... now what i am doing is.....if i take sample conf for rtpproxy it works but if i put it in my ser.cfg it doens't. ring goes for device behind NAT but can't hear. i am pasting my ser.cg for your reference... i have written one call module also and its function is to work on call allow function, call deny, forward etc and it is working without including NAT moduel....but if i include NAT...public ip's can still talk but private can't only ring goes for them log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" #added by kapil loadmodule "/usr/local/lib/ser/modules/call.so" loadmodule "/usr/local/lib/ser/modules/vm.so" # !! Nathelper loadmodule "/usr/local/lib/ser/modules/nathelper.so" #added by kapil # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # !! Nathelper modparam("registrar", "nat_flag", 6) modparam("nathelper", "natping_interval", 30) # Ping interval 30 s modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # !! Nathelper # Special handling for NATed clients; first, NAT test is # executed: it looks for via!=received and RFC1918 addresses # in Contact (may fail if line-folding is used); also, # the received test should, if completed, should check all # vias for rpesence of received if (nat_uac_test("3")) { # Allow RR-ed requests, as these may indicate that # a NAT-enabled proxy takes care of it; unless it is # a REGISTER if (method == "REGISTER" || ! search("^Record-Route:")) { log("LOG: Someone trying to register from private IP, rewriting\n"); # This will work only for user agents that support symmetric # communication. We tested quite many of them and majority is # smart enough to be symmetric. In some phones it takes a configuration # option. With Cisco 7960, it is called NAT_Enable=Yes, with kphone it is # called "symmetric media" and "symmetric signalling". fix_nated_contact(); # Rewrite contact with source IP of signalling if (method == "INVITE") { fix_nated_sdp("1"); # Add direction=active to SDP }; force_rport(); # Add rport parameter to topmost Via setflag(6); # Mark as NATed }; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # loose-route processing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("", "subscriber")) { www_challenge("", "0"); break; }; save("location"); break; }; if (method=="INVITE" || method=="ACK" || method=="BYE" || method=="CANCEL") { if(call_feature()){ if(uri=~"sip:7@") { if(!call_redial()) { sl_send_reply("404", "Not Found"); break; }; } else if(uri=~"sip:00*") { if(call_pstn()) { break; }; } else { if(!call_speeddial()) { sl_send_reply("404", "Not Found"); break; }; }; } else { if(!call_sip()){ sl_send_reply("404", "Not Found"); break; }; }; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # !! Nathelper if (uri=~"[@:](192\.168\.|10\.|172\.(1[6-9]|2[0-9]|3[0-1])\.)" && !search("^Route:")){ sl_send_reply("479", "We don't forward to private IP addresses"); break; }; # if client or server know to be behind a NAT, enable relay if (isflagset(6)) { force_rtp_proxy(); }; # NAT processing of replies; apply to all transactions (for example, # re-INVITEs from public to private UA are hard to identify as # NATed at the moment of request processing); look at replies t_on_reply("1"); # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if(call_flag("1")) { if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; if (!t_relay()) { sl_reply_error(); }; break; }; if(call_flag("2")) { break; }; if(call_flag("3")) { if (!t_newtran()) { log("could not create new transaction\n"); sl_send_reply("500","could not create new transaction"); break; }; t_reply("100","Trying -- just wait a minute !"); if(!vm("/tmp/am_fifo","voicemail")){ log("could not contact the answer machine\n"); t_reply("500","could not contact the answer machine"); }; break; }; } # !! Nathelper onreply_route[1] { # NATed transaction ? if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") { fix_nated_contact(); force_rtp_proxy(); # otherwise, is it a transaction behind a NAT and we did not # know at time of request processing ? (RFC1918 contacts) } else if (nat_uac_test("1")) { fix_nated_contact(); }; } >From: Atle Samuelsen <clona(a)camaro.no> >To: Kapil Dhawan <sersavvy(a)hotmail.com> >CC: serusers(a)lists.iptel.org >Subject: Re: [Serusers] NAT Solution >Date: Sat, 24 Apr 2004 12:18:55 +0200 > > >Hi! > >www.google.com and search for "ser +nat :host mail.iptel.org" > >otherstuff, rtpproxy, mediaproxy etc. > >btw. Check the list for common queristions :-) > > >-Atle > > >* Kapil Dhawan <sersavvy(a)hotmail.com> [040424 07:07]: > > Hi > > > > Could you pls suggest me some solution for implementing NAT. I have >almost > > all the devices behind NAT. Pls suggest me that where can i get the > > documentation for that too... > > > > Regards > > > > _________________________________________________________________ > > Deals can't get any better. Products at Lowest Prices. > > http://go.msnserver.com/IN/47508.asp Only on baazee.com > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > _________________________________________________________________ Ready cash in just 72 hours. Apply Now !!! http://go.msnserver.com/IN/46922.asp

2 1

[Serusers] HELP starting Application Agent
by Danny Faingezicht 25 Apr '04

25 Apr '04

I found at www.iptel.org/aa example of writing simple implementation using the AA application server. I wonder if any one can help where I can find how to install the application server and where I can find all the source for writing the python implementation. In the example for SimplePrepaid.py , the module aa was import , Where I can find it Danny Faingezicht Kagoor Networks Ltd. Tel: 972-9-9717339

2 1

[Serusers] Corrected TRABAS--------->SER
by Humberto Atristain 25 Apr '04

25 Apr '04

Dear Guys, Since I am a newbie I request profesional services to the TRABAS Billing company, but note ven reply to my request, I Wonder first of all: Can it be posible to put TRABAS to work with ser? Does somebody has good luck with TRABAS? Any other Open-Source Voip billing with quality? Someone can help me with this issue (install fee to setup a TRABAS or any other "affordable" voip billing) HA

1 0

Re: [Serusers] Accounting directly sent to mysql
by Klaus Darilion 25 Apr '04

25 Apr '04

If you have ser isntalled via RPMs, then you can't account to mysql. You have to compile it yourself. btw: forget agout the rpm version and uninstall it completly before installing ser from source. klaus PS: please always cc: to the list Nhadie wrote: > Hi, > > What if installed it via RPM? Isn't the mysql accounting compiled? What > do I need to configure on the ser.cfg to activate mysql accounting? > Thank You > > Ronald > > --------- Original Message -------- > From: "Klaus Darilion" <klaus.mailinglists(a)pernau.at> > To: "ron(a)silverbackasp.com" <ron(a)silverbackasp.com> > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] Accounting directly sent to mysql > Date: 24/04/04 11:55 > > > yes, turn on accounting for mysql. Take a look into the Makefile in > modules/acc, uncommment the line and re-compile. > > klaus > > Ronald Ramos wrote: > > > Hi, > > > > Can I automatically redirect all the time of call and end of call > to mysql > > server instead of the syslog? > > > > Thank you > > > > Ronald > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org <mailto:serusers@lists.iptel.org> > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > ________________________________________________ > Message sent using UebiMiau 2.7

1 0

[Serusers] SIP+B2BUA
by Mook 25 Apr '04

25 Apr '04

Hi all, I installs vovida B2BUA on linux with proxy server SER. B2BUA and SER work fine.Here has a problem. I uses messenger 4.7 and kphone as sip client. I establishs session by B2BUA and SER.But why can't I see UDP packet pass through B2BUA. (1) (4) messenger 4.7 ---------------------> SER ---------------------------> kphone | | (2) | | (3) | | B2BUA Thanks.

2 2

[Serusers] SIP <-> H.323
by Esteban D. Benavides 25 Apr '04

25 Apr '04

I'm looking for a gateway for SER to translate and work between SIP and H.323. Is there any software for this... Daniel

3 2

[Serusers] SER+SERWEB help!!!!
by gaillac harry 24 Apr '04

24 Apr '04

Hi all, Here is my ser.cg file. I try to configure send IM, Missed calls, Voicemail. I just can configure Send IM. Now I can call isdngw, ivr I need help to configure lookup location logic for missed calls and voicemail (offline users) Anybody could help me to configure the others functions (problem with logic !!). harry Regards # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # -- global configuration parameters -- #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=192.168.0.1 port=5060 children=4 fifo="/tmp/ser_fifo" fifo_mode=0666 # -- module loading -- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/msilo.so" loadmodule "/usr/lib/ser/modules/acc.so" loadmodule "/usr/lib/ser/modules/vm.so" loadmodule "/usr/lib/ser/modules/uri.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # -- setting module-specific parameters -- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", 1) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # --registrar params-- modparam("registrar", "use_domain", 1) # --domain params-- modparam("domain", "db_url", "mysql://ser:heslo@localhost/ser") modparam("domain", "db_mode", 1) # Use chaching # --acc params-- modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("acc", "db_missed_flag", 3) # --msilo params-- modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser") modparam("msilo", "db_table", "silo") modparam("msilo","registrar","sip:registrar@192.168.0.1") # --uri params-- modparam("uri", "db_url", "mysql://ser:heslo@localhost/ser") modparam("uri", "subscriber_table", "subscriber") # --vm params-- modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser") # -- request routing logic -- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # isdn gateway if(method=="INVITE" || method=="BYE" || method=="CANCEL"){ if (uri=~"sip:[0-9]{10}@.*") { route(2); break; }; }; # ivr conf if(method=="INVITE" || method=="BYE" || method=="CANCEL"){ if (uri=~"sip:5000@.*") { route(4); break; }; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (is_from_local()) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("", "subscriber")) { www_challenge("", "0"); break; }; save("location"); # MSILO - dumping user's offline messages if (m_dump()) { log("MSILO: offline messages dumped - if they were\n"); }else{ log("MSILO: no offline messages dumped\n"); }; break; }; # native SIP destinations are handled using our USRLOC DB lookup("aliases"); if (!lookup("location")) { if (! t_newtran()) { sl_reply_error(); break; }; # we do not care about anything else but MESSAGEs if (!method=="MESSAGE") { if (!t_reply("404", "Not found")) { sl_reply_error(); }; break; }; log("MESSAGE received -> storing using MSILO\n"); # MSILO - storing as offline message if (m_store("0")) { log("MSILO: offline message stored\n"); if (!t_reply("202", "Accepted")) { sl_reply_error(); }; }else{ log("MSILO: offline message NOT stored\n"); if (!t_reply("503", "Service Unavailable")) { sl_reply_error(); }; }; break; }; # if the downstream UA does not support MESSAGE requests # go to failure_route[1] t_on_failure("1"); t_relay(); break; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } failure_route[1] { # forwarding failed -- check if the request was a MESSAGE if (!method=="MESSAGE") { break; }; log(1,"MSILO: the downstream UA does not support MESSAGE requests ...\n"); # we have changed the R-URI with the contact address -- ignore it now if (m_store("1")) { log("MSILO: offline message stored\n"); t_reply("202", "Accepted for delivery"); }else{ log("MSILO: offline message NOT stored\n"); t_reply("503", "Service Unavailable"); }; } route[2] { # ############################## # # isdngw specific configuration # # ############################## # if(t_newtran()){ if(method=="INVITE" || method=="BYE" || method=="CANCEL"){ # send a response right at the start to avoid retransmissions t_reply("100","Trying -- just wait a minute !"); # isdngw only gets activated on invite requests if(method=="INVITE"){ # filename is defined in sems.conf. if(uri=~"sip:[0-9]{10}@.*"){ if(!vm("/tmp/am_fifo","isdngw")){ log("could not contact isdngw\n"); t_reply("500","could not contact isdngw"); }; # Allow the announcement module of sems to be used as well. # This can be useful for testing the isdngw. } else if(uri=~"sip:announcement@.*"){ if(!vm("/tmp/am_fifo","announcement")){ log("could not contact announcement\n"); t_reply("500","could not contact announcement"); }; # we dont feel responsible for sip addresses of any other kind, # so send the right error code. } else { t_reply("404","Not Found"); }; # stop routing here, the message is now processed by the media server break; }; # The following handles the call termination, we must pass these requests # to the media server as follows. Again make shure the fifo name and permissions # are set correctly (like im sems.conf). if((method=="BYE")||(method=="CANCEL")){ if(!vm("/tmp/am_fifo","bye")){ log("could not contact the media server\n"); t_reply("500","could not contact the media server"); }; break; }; # other methods than INVITE, BYE and CANCEL are not handled by this SIP Server # so we sent an error message } else { log("ERROR: method not supported\n"); t_reply("500", "sorry, method not supported"); }; } else { # for any reason the transaction could not be created, send error code log("could not create new transaction\n"); sl_send_reply("500","could not create new transaction"); }; # in isdngw.conf. Don't change this setting. t_relay(); # end of routing. } route[3] { # Voicemail specific configuration - begin if(method=="ACK" || method=="INVITE" || method=="BYE"){ if (!t_newtran()) { log("could not create new transaction\n"); sl_send_reply("500","could not create new transaction"); break; }; t_reply("100","Trying -- just wait a minute !"); if(method=="INVITE"){ log("**************** vm start - begin ******************\n"); if (uri=~"sip:*@example.com" || uri=~"sip:*@support.example.com") { if (!vm("/tmp/am_fifo", "announcement")) { log("couldn't contact announcement server\n"); t_reply("500", "couldn not contact announcement server"); }; } else { if(!vm("/tmp/am_fifo","voicemail")){ log("could not contact the answer machine\n"); t_reply("500","could not contact the answer machine"); }; }; log("**************** vm start - end ******************\n"); } else if(method=="BYE"){ log("**************** vm end - begin ******************\n"); if(!vm("/tmp/am_fifo","bye")){ log("could not contact the answer machine\n"); t_reply("500","could not contact the answer machine"); }; log("**************** vm end - end ******************\n"); }; break; }; if (method=="CANCEL") { sl_send_reply("200", "cancels are junked here"); break; }; sl_send_reply("501", "method not understood here"); } route[4] { # ivr specific configuration - begin if(method=="ACK" || method=="INVITE" || method=="BYE"){ if (!t_newtran()) { log("could not create new transaction\n"); sl_send_reply("500","could not create new transaction"); break; }; t_reply("100","Trying -- just wait a minute !"); if(method=="INVITE"){ log("**************** vm start - begin ******************\n"); if (uri=~"sip:5000@.*") { if (!vm("/tmp/am_fifo", "ivr")) { log("couldn't contact ivr server\n"); t_reply("500", "couldn not contact ivr server"); }; }; log("**************** vm start - end ******************\n"); } else if(method=="BYE"){ log("**************** vm end - begin ******************\n"); if(!vm("/tmp/am_fifo","bye")){ log("could not contact ivr\n"); t_reply("500","could not contact ivr"); }; log("**************** vm end - end ******************\n"); }; break; }; if (method=="CANCEL") { sl_send_reply("200", "cancels are junked here"); break; }; sl_send_reply("501", "method not understood here"); }

3 2

[Serusers] Getting mysql into the stable version
by Peter Boot 24 Apr '04

24 Apr '04

Is there a trick to getting the mysql.so to compile and install as part of the stable source from CVS ? --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.667 / Virus Database: 429 - Release Date: 4/23/2004

4 4

[Serusers] correct way to start
by Peter Boot 24 Apr '04

24 Apr '04

After compling the stable version from CVS with make clean make all make install Can anyone please tell me the correct way to start SER ? --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.667 / Virus Database: 429 - Release Date: 4/23/2004

3 2

[Serusers] fifo_db_url
by Andy Pyles 24 Apr '04

24 Apr '04

Hi I've gotten this error from the latest version from CVS. Can someone explain what this is, and give an example on how it can be used? /usr/local/sbin/ser[7560]: WARNING: no fifo_db_url given - fifo DB commands disabled Thanks, Andy

2 4

[Serusers] SER+SERWEB
by gaillac harry 24 Apr '04

24 Apr '04

Hi all, Here is my ser.cg file. I try to configure send IM, Missed calls, Voicemail. I just can configure Send IM. Anybody could help me to configure the others functions (problem with logic !!). harry Regards # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=192.168.0.1 port=5060 children=4 fifo="/tmp/ser_fifo" fifo_mode=0666 # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/msilo.so" loadmodule "/usr/lib/ser/modules/acc.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", 1) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # --registrar params-- modparam("registrar", "use_domain", 1) # --domain params-- modparam("domain", "db_url", "mysql://ser:heslo@localhost/ser") modparam("domain", "db_mode", 1) # Use chaching # --acc params-- #modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") #modparam("acc", "db_missed_flag", 3) # --msilo params-- modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser") modparam("msilo", "db_table", "silo") modparam("msilo","registrar","sip:registrar@192.168.0.1") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; setflag(3); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (is_from_local()) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("", "subscriber")) { www_challenge("", "0"); break; }; save("location"); # MSILO - dumping user's offline messages if (m_dump()) { log("MSILO: offline messages dumped - if they were\n"); }else{ log("MSILO: no offline messages dumped\n"); }; break; }; # native SIP destinations are handled using our USRLOC DB lookup("aliases"); if (!lookup("location")) { if (! t_newtran()) { sl_reply_error(); break; }; # we do not care about anything else but MESSAGEs if (!(method=="MESSAGE")) { if (!t_reply("404", "Not found")) { sl_reply_error(); }; break; }; log("MESSAGE received -> storing using MSILO\n"); # MSILO - storing as offline message if (m_store("0")) { log("MSILO: offline message stored\n"); if (!t_reply("202", "Accepted")) { sl_reply_error(); }; }else{ log("MSILO: offline message NOT stored\n"); if (!t_reply("503", "Service Unavailable")) { sl_reply_error(); }; }; break; }; # if the downstream UA does not support MESSAGE requests # go to failure_route[1] t_on_failure("1"); t_relay(); break; }; if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { route(2); t_relay(); break; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } failure_route[1] { # forwarding failed -- check if the request was a MESSAGE if (!method=="MESSAGE") { break; }; log(1,"MSILO: the downstream UA does not support MESSAGE requests ...\n"); # we have changed the R-URI with the contact address -- ignore it now if (m_store("1")) { log("MSILO: offline message stored\n"); t_reply("202", "Accepted for delivery"); }else{ log("MSILO: offline message NOT stored\n"); t_reply("503", "Service Unavailable"); }; } route[2] { # non-Voip -- just send "off-line" if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { sl_send_reply("404", "Not Found"); break; }; if (t_newtran()) { t_reply("404", "Not Found"); acc_db_request("404 missed call", "missed_calls"); }; }

1 0

[Serusers] SER+SERWEB
by gaillac harry 24 Apr '04

24 Apr '04

Hi all, Here is my ser.cg file. I try to configure send IM, Missed calls, Voicemail. I just can configure Send IM. Anybody could help me to configure the others functions (problem with logic !!). harry Regards # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=192.168.0.1 port=5060 children=4 fifo="/tmp/ser_fifo" fifo_mode=0666 # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/msilo.so" loadmodule "/usr/lib/ser/modules/acc.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", 1) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # --registrar params-- modparam("registrar", "use_domain", 1) # --domain params-- modparam("domain", "db_url", "mysql://ser:heslo@localhost/ser") modparam("domain", "db_mode", 1) # Use chaching # --acc params-- #modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") #modparam("acc", "db_missed_flag", 3) # --msilo params-- modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser") modparam("msilo", "db_table", "silo") modparam("msilo","registrar","sip:registrar@192.168.0.1") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; setflag(3); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (is_from_local()) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("", "subscriber")) { www_challenge("", "0"); break; }; save("location"); # MSILO - dumping user's offline messages if (m_dump()) { log("MSILO: offline messages dumped - if they were\n"); }else{ log("MSILO: no offline messages dumped\n"); }; break; }; # native SIP destinations are handled using our USRLOC DB lookup("aliases"); if (!lookup("location")) { if (! t_newtran()) { sl_reply_error(); break; }; # we do not care about anything else but MESSAGEs if (!(method=="MESSAGE")) { if (!t_reply("404", "Not found")) { sl_reply_error(); }; break; }; log("MESSAGE received -> storing using MSILO\n"); # MSILO - storing as offline message if (m_store("0")) { log("MSILO: offline message stored\n"); if (!t_reply("202", "Accepted")) { sl_reply_error(); }; }else{ log("MSILO: offline message NOT stored\n"); if (!t_reply("503", "Service Unavailable")) { sl_reply_error(); }; }; break; }; # if the downstream UA does not support MESSAGE requests # go to failure_route[1] t_on_failure("1"); t_relay(); break; }; if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { route(2); t_relay(); break; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } failure_route[1] { # forwarding failed -- check if the request was a MESSAGE if (!method=="MESSAGE") { break; }; log(1,"MSILO: the downstream UA does not support MESSAGE requests ...\n"); # we have changed the R-URI with the contact address -- ignore it now if (m_store("1")) { log("MSILO: offline message stored\n"); t_reply("202", "Accepted for delivery"); }else{ log("MSILO: offline message NOT stored\n"); t_reply("503", "Service Unavailable"); }; } route[2] { # non-Voip -- just send "off-line" if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { sl_send_reply("404", "Not Found"); break; }; if (t_newtran()) { t_reply("404", "Not Found"); acc_db_request("404 missed call", "missed_calls"); }; }

1 0

[Serusers] Accounting directly sent to mysql
by Ronald Ramos 24 Apr '04

24 Apr '04

Hi, Can I automatically redirect all the time of call and end of call to mysql server instead of the syslog? Thank you Ronald

2 1

[Serusers] SER+SERWEB
by gaillac harry 24 Apr '04

24 Apr '04

Hi all, Here is my ser.cg file. I try to configure send IM, Missed calls, Voicemail. I just can configure Send IM. Anybody could help me to configure the others functions (problem with logic !!). harry Regards # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=192.168.0.1 port=5060 children=4 fifo="/tmp/ser_fifo" fifo_mode=0666 # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/msilo.so" loadmodule "/usr/lib/ser/modules/acc.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", 1) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # --registrar params-- modparam("registrar", "use_domain", 1) # --domain params-- modparam("domain", "db_url", "mysql://ser:heslo@localhost/ser") modparam("domain", "db_mode", 1) # Use chaching # --acc params-- #modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") #modparam("acc", "db_missed_flag", 3) # --msilo params-- modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser") modparam("msilo", "db_table", "silo") modparam("msilo","registrar","sip:registrar@192.168.0.1") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; setflag(3); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (is_from_local()) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("", "subscriber")) { www_challenge("", "0"); break; }; save("location"); # MSILO - dumping user's offline messages if (m_dump()) { log("MSILO: offline messages dumped - if they were\n"); }else{ log("MSILO: no offline messages dumped\n"); }; break; }; # native SIP destinations are handled using our USRLOC DB lookup("aliases"); if (!lookup("location")) { if (! t_newtran()) { sl_reply_error(); break; }; # we do not care about anything else but MESSAGEs if (!(method=="MESSAGE")) { if (!t_reply("404", "Not found")) { sl_reply_error(); }; break; }; log("MESSAGE received -> storing using MSILO\n"); # MSILO - storing as offline message if (m_store("0")) { log("MSILO: offline message stored\n"); if (!t_reply("202", "Accepted")) { sl_reply_error(); }; }else{ log("MSILO: offline message NOT stored\n"); if (!t_reply("503", "Service Unavailable")) { sl_reply_error(); }; }; break; }; # if the downstream UA does not support MESSAGE requests # go to failure_route[1] t_on_failure("1"); t_relay(); break; }; if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { route(2); t_relay(); break; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } failure_route[1] { # forwarding failed -- check if the request was a MESSAGE if (!method=="MESSAGE") { break; }; log(1,"MSILO: the downstream UA does not support MESSAGE requests ...\n"); # we have changed the R-URI with the contact address -- ignore it now if (m_store("1")) { log("MSILO: offline message stored\n"); t_reply("202", "Accepted for delivery"); }else{ log("MSILO: offline message NOT stored\n"); t_reply("503", "Service Unavailable"); }; } route[2] { # non-Voip -- just send "off-line" if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { sl_send_reply("404", "Not Found"); break; }; if (t_newtran()) { t_reply("404", "Not Found"); acc_db_request("404 missed call", "missed_calls"); }; }

1 0

[Serusers] NAT Solution
by Kapil Dhawan 24 Apr '04

24 Apr '04

Hi Could you pls suggest me some solution for implementing NAT. I have almost all the devices behind NAT. Pls suggest me that where can i get the documentation for that too... Regards _________________________________________________________________ Deals can't get any better. Products at Lowest Prices. http://go.msnserver.com/IN/47508.asp Only on baazee.com

2 1

Re: [Serusers] Another Question....
by lakmal＠lankacom.net 24 Apr '04

24 Apr '04

I tried it as well. The GUI appears but when it tries to make a connection with it's sever looks like it hangs up... > I would not bet on it too much -- it does not seem to be actively > maintained and the last version I tried was not exactly meeting > my expectations. > > -jiri > > At 10:13 PM 4/23/2004, Sergio Diaz wrote: > >>Anybody work with SerAdmin (xten) last version and Ser 0.8.12 ? >> >>I try to install but not make to work.... >> >>Any Ideas ? >> >>Regards! >> >>-- >>Sergio DÃaz Escobar. CCNA >><sdiaz at comnet dot net dot mx> >>Network Engineer - Information Technology >>COMNET, S.A. DE C.V. >>Patriotismo 889 7o. Piso Col. Mixcoac >>Mexico, 039100, D.F. >>(52) 55 12539230 <> 121 Fax. (52) 55 12539240 >> >> >> >>Computers are unreliable, but humans are even more unreliable. >>Any system which depends on human reliability is unreliable. >> Murphy`s Law. >> >> >> >>___________________________________________________________________ >> >>This email may be confidential and/or privileged. Only the intended >>recipient may access or use it. Any dissemination, distribution or >>copying of this email is strictly prohibited. If you are not the >>intended recipient please notify us immediately by return email and >>then erase the email. >> >>We use virus scanning software but exclude all liability for viruses >>or similar in any attachment or message...,..,..,. >> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers > > -- > Jiri Kuthan http://iptel.org/~jiri/ > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > Regards, Lakmal Lankacom Services (Pvt) Ltd. 65C, Dharmapala Mawatha, Colombo 07. Sri Lanka. Tel: +94-1-437545 www.lankacom.net

1 0

[Serusers] Re: SERWEB+SER
by Atle Samuelsen 23 Apr '04

23 Apr '04

I recomend using CVS for your config file, So you always can @hack@ on it, and see if you get stuff to work, if not.. just checkout the last working version :-) / Atle * gaillac harry <gaillacharry(a)yahoo.fr> [040423 15:04]: > I still agree you some examples for voicemail,msilo,... the problem is > to put these functions in ser.cfg in order to keep SER running. > > Le ven 23/04/2004 ?? 14:47, Atle Samuelsen a ??crit : > > I think there is a couple of working examples now.. my cfg file is per > > now running nothing. since my server is just used as a dumb proxy. > > > > -Atle > > > > * gaillac harry <gaillacharry(a)yahoo.fr> [040423 14:31]: > > > I agree you but could you send me back a ser.cfg file with missed calls, > > > send IM, voicemail capacities ? > > > > > > you would help me !! > > > > > > Harry > > > > > > Le ven 23/04/2004 ?? 07:53, Atle Samuelsen a ??crit : > > > > I'm not a developer myself.. but google is my friend :) > > > > I think alot of the questions you have adde here is alreaddy answerd > > > > before on the mailing-lists. > > > > > > > > > > > > -Atle > > > > > > > > * gaillac harry <gaillacharry(a)yahoo.fr> [040423 01:53]: > > > > > hello atle, > > > > > > > > > > I waste to much time with SER+SEMS+SERWEB I'm not a delopper, I've tried > > > > > my best to configure SER without a great success. > > > > > I'm about to look at Snom products. > > > > > > > > > > Many thanks all > > > > > Harry > > > > > > > > > > > > > > > Le jeu 22/04/2004 ?? 21:40, Atle Samuelsen a ??crit : > > > > > > www.google.com > > > > > > acc +mysql :host mail.iptel.org > > > > > > > > > > > > have'nt testet it.. but I know that you are not the first one who has > > > > > > had that problem. > > > > > > > > > > > > -atle > > > > > > > > > > > > * gaillac harry <gaillacharry(a)yahoo.fr> [040422 17:06]: > > > > > > > your're right > > > > > > > "DEFS+=-DSQL_ACC" in the modules/acc/Makefile. > > > > > > > Where Could I find that information? > > > > > > > Regards > > > > > > > > > > > > > > Le jeu 22/04/2004 ?? 16:45, Atle Samuelsen a ??crit : > > > > > > > > If I dont rember TOO wrong, I think there is a option you have forgot'n > > > > > > > > in the Makefile for the acc.module that says if it uses a database or > > > > > > > > not. > > > > > > > > > > > > > > > > > > > > > > > > - Atle > > > > > > > > > > > > > > > > > > > > > > > > * gaillac harry <gaillacharry(a)yahoo.fr> [040422 16:29]: > > > > > > > > > Here is my ser.cfg.SER don't start because of acc module > > > > > > > > > anybody could help me to solved this problem before an other ? > > > > > > > > > > > > > > > > > > ser -c => > > > > > > > > > 0(6238) set_mod_param_regex: parameter <db_url> not found in module > > > > > > > > > <acc> > > > > > > > > > 0(6238) parse error (96,60-61): Can't set module parameter > > > > > > > > > 0(6238) set_mod_param_regex: parameter <db_missed_flag> not found in > > > > > > > > > module <acc> > > > > > > > > > 0(6238) parse error (97,36-37): Can't set module parameter > > > > > > > > > 0(6238) parse error (195,63-64): unknown command, missing loadmodule? > > > > > > > > > > > > > > > > > > ERROR: bad config file (3 errors) > > > > > > > > > > > > > > > > > > regards > > > > > > > > > > > > > > > > > > > > > > > > > > > # > > > > > > > > > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ > > > > > > > > > # > > > > > > > > > # simple quick-start config script > > > > > > > > > # > > > > > > > > > > > > > > > > > > # ----------- global configuration parameters ------------------------ > > > > > > > > > > > > > > > > > > #debug=3 # debug level (cmd line: -dddddddddd) > > > > > > > > > #fork=yes > > > > > > > > > #log_stderror=no # (cmd line: -E) > > > > > > > > > > > > > > > > > > /* Uncomment these lines to enter debugging mode > > > > > > > > > debug=9 > > > > > > > > > fork=yes > > > > > > > > > log_stderror=yes > > > > > > > > > */ > > > > > > > > > > > > > > > > > > check_via=no # (cmd. line: -v) > > > > > > > > > dns=no # (cmd. line: -r) > > > > > > > > > rev_dns=no # (cmd. line: -R) > > > > > > > > > port=5060 > > > > > > > > > listen=192.168.0.1 > > > > > > > > > children=4 > > > > > > > > > fifo="/tmp/ser_fifo" > > > > > > > > > fifo_mode=0666 > > > > > > > > > #alias="example.com" > > > > > > > > > # ------------------ module:wq loading > > > > > > > > > ---------------------------------- > > > > > > > > > > > > > > > > > > # Uncomment this if you want to use SQL database > > > > > > > > > loadmodule "/usr/lib/ser/modules/mysql.so" > > > > > > > > > > > > > > > > > > loadmodule "/usr/lib/ser/modules/sl.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/tm.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/rr.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/maxfwd.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/domain.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/usrloc.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/registrar.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/msilo.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/vm.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/acc.so" > > > > > > > > > > > > > > > > > > # Uncomment this if you want digest authentication > > > > > > > > > # mysql.so must be loaded ! > > > > > > > > > loadmodule "/usr/lib/ser/modules/auth.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/auth_db.so" > > > > > > > > > > > > > > > > > > # ----------------- setting module-specific parameters --------------- > > > > > > > > > > > > > > > > > > # -- usrloc params -- > > > > > > > > > > > > > > > > > > #modparam("usrloc", "db_mode", 0) > > > > > > > > > > > > > > > > > > # Uncomment this if you want to use SQL database > > > > > > > > > # for persistent storage and comment the previous line > > > > > > > > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > > > > modparam("usrloc", "db_mode", 1) > > > > > > > > > #modparam("usrloc", "use_domain", 1) > > > > > > > > > > > > > > > > > > # --register params-- > > > > > > > > > modparam("registrar", "use_domain", 1) > > > > > > > > > > > > > > > > > > # -- auth params -- > > > > > > > > > # Uncomment if you are using auth module > > > > > > > > > # > > > > > > > > > modparam("auth_db", "calculate_ha1", yes) > > > > > > > > > # > > > > > > > > > # If you set "calculate_ha1" parameter to yes (which true in this > > > > > > > > > config), > > > > > > > > > # uncomment also the following parameter) > > > > > > > > > # > > > > > > > > > modparam("auth_db", "password_column", "password") > > > > > > > > > > > > > > > > > > # -- rr params -- > > > > > > > > > # add value to ;lr param to make some broken UAs happy > > > > > > > > > modparam("rr", "enable_full_lr", 1) > > > > > > > > > > > > > > > > > > # --domain module-- > > > > > > > > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > > > > modparam("domain", "db_mode", 1) > > > > > > > > > modparam("domain", "domain_table", "domain") > > > > > > > > > modparam("domain", "domain_col", "domain") > > > > > > > > > > > > > > > > > > # --msilo params-- > > > > > > > > > modparam("msilo", "registrar", "sip:registrar@example.com") > > > > > > > > > modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > > > > > > > > > > > > > # --vm params-- > > > > > > > > > modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > > > > > > > > > > > > > # --acc params-- > > > > > > > > > modparam("acc", "log_level", 1) > > > > > > > > > modparam("acc", "log_flag", 2) > > > > > > > > > modparam("acc", "log_missed_flag", 2) > > > > > > > > > modparam("acc", "log_fmt", "fimos") > > > > > > > > > modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > > > > modparam("acc", "db_missed_flag", 2) > > > > > > > > > > > > > > > > > > # ------------------------- request routing logic ------------------- > > > > > > > > > > > > > > > > > > # main routing logic > > > > > > > > > > > > > > > > > > route{ > > > > > > > > > > > > > > > > > > # initial sanity checks -- messages with > > > > > > > > > # max_forwards==0, or excessively long requests > > > > > > > > > if (!mf_process_maxfwd_header("10")) { > > > > > > > > > sl_send_reply("483","Too Many Hops"); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > if ( msg:len > max_len ) { > > > > > > > > > sl_send_reply("513", "Message too big"); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > > > > > > > > > > # we record-route all messages -- to make sure that > > > > > > > > > # subsequent messages will go through our proxy; that's > > > > > > > > > # particularly good if upstream and downstream entities > > > > > > > > > # use different transport protocol > > > > > > > > > record_route(); > > > > > > > > > # loose-route processing > > > > > > > > > if (loose_route()) { > > > > > > > > > t_relay(); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > > > > > > > > > > # if the request is for other domain use UsrLoc > > > > > > > > > # (in case, it does not work, use the following command > > > > > > > > > # with proper names and addresses in it) > > > > > > > > > if (is_from_local()) { > > > > > > > > > > > > > > > > > > if (method=="REGISTER") { > > > > > > > > > > > > > > > > > > # Uncomment this if you want to use digest authentication > > > > > > > > > if (!www_authorize("", "subscriber")) { > > > > > > > > > www_challenge("", "0"); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > > > > > > > > > > save("location"); > > > > > > > > > m_dump(); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > > > > > > > > > > # native SIP destinations are handled using our USRLOC DB > > > > > > > > > lookup("aliases"); > > > > > > > > > if (!lookup("location")) { > > > > > > > > > > > > > > > > > > if (method == "MESSAGE") { > > > > > > > > > if (!t_newtran()) { > > > > > > > > > sl_reply_error(); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > > > > > > > > > > if (m_store("0")) { > > > > > > > > > t_reply("202", "Accepted for Later Delivery"); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > > > > > > > > > > t_reply("503", "Service Unavailable"); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > }; > > > > > > > > > > > > > > > > > > if ((method=="INVITE" || method=="ACK") && t_newtran() ) { > > > > > > > > > t_reply("404", "Not Found"); > > > > > > > > > route(3); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > > > > > > > > > > }; > > > > > > > > > > > > > > > > > > setflag(2); > > > > > > > > > # forward to current uri now; use stateful forwarding; that > > > > > > > > > # works reliably even if we forward from TCP to UDP > > > > > > > > > t_on_failure("1"); > > > > > > > > > # forward to current uri now; use stateful forwarding; that > > > > > > > > > # works reliably even if we forward from TCP to UDP > > > > > > > > > if (!t_relay()) { > > > > > > > > > sl_reply_error(); > > > > > > > > > }; > > > > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > route[3] { > > > > > > > > > > > > > > > > > > # non-Voip -- just send "off-line" > > > > > > > > > if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { > > > > > > > > > sl_send_reply("404", "Not Found"); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > if (t_newtran()) { > > > > > > > > > t_reply("404", "Not Found"); > > > > > > > > > acc_db_request("404 missed call", "missed_calls"); > > > > > > > > > > > > > > > > > > }; > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

1 0

Re: [Serusers] SIP <-> H.323
by Gregory Sandul 23 Apr '04

23 Apr '04

Hi all, It is expected to be cisco solution for sip<->H.323 in 2004 http://www.cisco.com/en/US/products/sw/voicesw/ps5640/products_qanda_item09… Arnd, could you explain, why you think sipquest.com sucks? Thanks. Esteban D. Benavides wrote: > I'm looking for a gateway for SER to translate and work between SIP and > H.323. Is there any software for this... No Open-Source solution available except Asterisk. It is said that asterisk would be capable of this but i havent seen it at work or any example config. Dont try "sipquest.com" products cause the company IMO sucks. If you only need H323 -> sip-proxy -> sipua communication you can use siph323csgw which is part of Vovidas "Vocal" distribution. You cant use siph323csgw for for SIP <> H323 GK/GW communications. best regards, :: Arnd :: _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers __________________________________ Do you Yahoo!? Yahoo! Photos: High-quality 4x6 digital prints for 25� http://photos.yahoo.com/ph/print_splash

2 1

[Serusers] TRABAS ----> SER
by Humberto Atristain 23 Apr '04

23 Apr '04

1 0

[Serusers] Re: SERWEB+SER
by Atle Samuelsen 23 Apr '04

23 Apr '04

www.google.com acc +mysql :host mail.iptel.org have'nt testet it.. but I know that you are not the first one who has had that problem. -atle * gaillac harry <gaillacharry(a)yahoo.fr> [040422 17:06]: > your're right > "DEFS+=-DSQL_ACC" in the modules/acc/Makefile. > Where Could I find that information? > Regards > > Le jeu 22/04/2004 ?? 16:45, Atle Samuelsen a ??crit : > > If I dont rember TOO wrong, I think there is a option you have forgot'n > > in the Makefile for the acc.module that says if it uses a database or > > not. > > > > > > - Atle > > > > > > * gaillac harry <gaillacharry(a)yahoo.fr> [040422 16:29]: > > > Here is my ser.cfg.SER don't start because of acc module > > > anybody could help me to solved this problem before an other ? > > > > > > ser -c => > > > 0(6238) set_mod_param_regex: parameter <db_url> not found in module > > > <acc> > > > 0(6238) parse error (96,60-61): Can't set module parameter > > > 0(6238) set_mod_param_regex: parameter <db_missed_flag> not found in > > > module <acc> > > > 0(6238) parse error (97,36-37): Can't set module parameter > > > 0(6238) parse error (195,63-64): unknown command, missing loadmodule? > > > > > > ERROR: bad config file (3 errors) > > > > > > regards > > > > > > > > > # > > > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ > > > # > > > # simple quick-start config script > > > # > > > > > > # ----------- global configuration parameters ------------------------ > > > > > > #debug=3 # debug level (cmd line: -dddddddddd) > > > #fork=yes > > > #log_stderror=no # (cmd line: -E) > > > > > > /* Uncomment these lines to enter debugging mode > > > debug=9 > > > fork=yes > > > log_stderror=yes > > > */ > > > > > > check_via=no # (cmd. line: -v) > > > dns=no # (cmd. line: -r) > > > rev_dns=no # (cmd. line: -R) > > > port=5060 > > > listen=192.168.0.1 > > > children=4 > > > fifo="/tmp/ser_fifo" > > > fifo_mode=0666 > > > #alias="example.com" > > > # ------------------ module:wq loading > > > ---------------------------------- > > > > > > # Uncomment this if you want to use SQL database > > > loadmodule "/usr/lib/ser/modules/mysql.so" > > > > > > loadmodule "/usr/lib/ser/modules/sl.so" > > > loadmodule "/usr/lib/ser/modules/tm.so" > > > loadmodule "/usr/lib/ser/modules/rr.so" > > > loadmodule "/usr/lib/ser/modules/maxfwd.so" > > > loadmodule "/usr/lib/ser/modules/domain.so" > > > loadmodule "/usr/lib/ser/modules/usrloc.so" > > > loadmodule "/usr/lib/ser/modules/registrar.so" > > > loadmodule "/usr/lib/ser/modules/msilo.so" > > > loadmodule "/usr/lib/ser/modules/vm.so" > > > loadmodule "/usr/lib/ser/modules/acc.so" > > > > > > # Uncomment this if you want digest authentication > > > # mysql.so must be loaded ! > > > loadmodule "/usr/lib/ser/modules/auth.so" > > > loadmodule "/usr/lib/ser/modules/auth_db.so" > > > > > > # ----------------- setting module-specific parameters --------------- > > > > > > # -- usrloc params -- > > > > > > #modparam("usrloc", "db_mode", 0) > > > > > > # Uncomment this if you want to use SQL database > > > # for persistent storage and comment the previous line > > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") > > > modparam("usrloc", "db_mode", 1) > > > #modparam("usrloc", "use_domain", 1) > > > > > > # --register params-- > > > modparam("registrar", "use_domain", 1) > > > > > > # -- auth params -- > > > # Uncomment if you are using auth module > > > # > > > modparam("auth_db", "calculate_ha1", yes) > > > # > > > # If you set "calculate_ha1" parameter to yes (which true in this > > > config), > > > # uncomment also the following parameter) > > > # > > > modparam("auth_db", "password_column", "password") > > > > > > # -- rr params -- > > > # add value to ;lr param to make some broken UAs happy > > > modparam("rr", "enable_full_lr", 1) > > > > > > # --domain module-- > > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") > > > modparam("domain", "db_mode", 1) > > > modparam("domain", "domain_table", "domain") > > > modparam("domain", "domain_col", "domain") > > > > > > # --msilo params-- > > > modparam("msilo", "registrar", "sip:registrar@example.com") > > > modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > # --vm params-- > > > modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > # --acc params-- > > > modparam("acc", "log_level", 1) > > > modparam("acc", "log_flag", 2) > > > modparam("acc", "log_missed_flag", 2) > > > modparam("acc", "log_fmt", "fimos") > > > modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") > > > modparam("acc", "db_missed_flag", 2) > > > > > > # ------------------------- request routing logic ------------------- > > > > > > # main routing logic > > > > > > route{ > > > > > > # initial sanity checks -- messages with > > > # max_forwards==0, or excessively long requests > > > if (!mf_process_maxfwd_header("10")) { > > > sl_send_reply("483","Too Many Hops"); > > > break; > > > }; > > > if ( msg:len > max_len ) { > > > sl_send_reply("513", "Message too big"); > > > break; > > > }; > > > > > > # we record-route all messages -- to make sure that > > > # subsequent messages will go through our proxy; that's > > > # particularly good if upstream and downstream entities > > > # use different transport protocol > > > record_route(); > > > # loose-route processing > > > if (loose_route()) { > > > t_relay(); > > > break; > > > }; > > > > > > # if the request is for other domain use UsrLoc > > > # (in case, it does not work, use the following command > > > # with proper names and addresses in it) > > > if (is_from_local()) { > > > > > > if (method=="REGISTER") { > > > > > > # Uncomment this if you want to use digest authentication > > > if (!www_authorize("", "subscriber")) { > > > www_challenge("", "0"); > > > break; > > > }; > > > > > > save("location"); > > > m_dump(); > > > break; > > > }; > > > > > > # native SIP destinations are handled using our USRLOC DB > > > lookup("aliases"); > > > if (!lookup("location")) { > > > > > > if (method == "MESSAGE") { > > > if (!t_newtran()) { > > > sl_reply_error(); > > > break; > > > }; > > > > > > if (m_store("0")) { > > > t_reply("202", "Accepted for Later Delivery"); > > > break; > > > }; > > > > > > t_reply("503", "Service Unavailable"); > > > break; > > > }; > > > }; > > > > > > if ((method=="INVITE" || method=="ACK") && t_newtran() ) { > > > t_reply("404", "Not Found"); > > > route(3); > > > break; > > > }; > > > > > > }; > > > > > > setflag(2); > > > # forward to current uri now; use stateful forwarding; that > > > # works reliably even if we forward from TCP to UDP > > > t_on_failure("1"); > > > # forward to current uri now; use stateful forwarding; that > > > # works reliably even if we forward from TCP to UDP > > > if (!t_relay()) { > > > sl_reply_error(); > > > }; > > > > > > } > > > > > > > > > route[3] { > > > > > > # non-Voip -- just send "off-line" > > > if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { > > > sl_send_reply("404", "Not Found"); > > > break; > > > }; > > > if (t_newtran()) { > > > t_reply("404", "Not Found"); > > > acc_db_request("404 missed call", "missed_calls"); > > > > > > }; > > > } > > > > > > > > > > >

2 4

[Serusers] Audio Problem
by GR S 23 Apr '04

23 Apr '04

Hi all, I started using SER a few weeks back. It's working pretty good, but i am having some issues with audio. This is the scenario: softphone <-> NAT <-> SER/Public IP <-> NAT <-> softphone I have a softphone in our local network trying to call another softphone in another network. This works perfectly, I am having no issues. But when I try to call a softphone in the same local network, the connection establishes, softphone says audio active, but there is no sound. I think this is because of NAT, but how can i make it work for phones connected in the same network? Can anyone help me in figuring out the problem, or any pointers or links from where i can find some useful information? Any help on this regard would be greately appreciated. Regards, Girish __________________________________ Do you Yahoo!? Yahoo! Photos: High-quality 4x6 digital prints for 25� http://photos.yahoo.com/ph/print_splash

1 0

[Serusers] Re: [Sems] current cvs ser version and isdngw
by Ulrich Abend 23 Apr '04

23 Apr '04

Yes, it would be good if you captured all the SIP messages and send a error description to serusers(a)lists.iptel.org. I am afraid, this is not really a isdngw problem, but more a SER routing problem. Uli. On Friday 23 April 2004 13:06, Ulrich Holeschak wrote: > Hello again, > would it help if i create an log file with etherreal? I expect it's getting > very big, but it contains more information. I expect, that i can only log > on the windows side, so if there are telegrams going to the wrong > destionation you can't see them ... > > Ulrich > > -----Ursprüngliche Nachricht----- > Von: "Ulrich Abend" <ullstar(a)iptel.org> > An: "Ulrich Holeschak" <ulrich(a)holeschak.de> > Gesendet: Freitag, 23. April 2004 11:57 > Betreff: Re: [Sems] current cvs ser version and isdngw > > > Hi Ulrich, > > > > sorry for asking for the logfiles again, my hosting provider delayed your > > mail > > > from 14:01. I received it yesterday at 23:00 :-(( > > > > Anyway, now after I reviewed the complete log files, I still cannot find > > a reason for the strange behaviour. > > > > Please tell me again, what exactly happens, from your last log files I > > see, > > > that the connection is established for ~30sec. What causes your Messenger > > to > > > send BYE then? > > > > Apr 22 23:24:46 router ser[29099]: method: <BYE> > > > > Do you manually stop the connection? Is Audio working allright while the > > 30sec? > > > > What version of Messenger do you use? There have been some problems with > > the > > > standards compliance (esp. version 5.0, recommended version is 4.7)... > > Do you have any other SIP client, you could use for testing? E.g. kphone? > > > > Uli. > >

1 0

Re[2]: [Serusers] SER + Asterisk
by Alessio Focardi 23 Apr '04

23 Apr '04

Hello Laurent, Tuesday, April 20, 2004, 6:21:07 PM, you wrote: LB> I think i follow the instructions ... but should i "route" ( so modify LB> the ser.cfg file) some messages to my gateway to use the answering LB> machine or services provided by my gateway ... LB> And what about autocreatepeer=yes? surely later you will have to route in ser.cfg for outbound calls, checking first for user auth and grp assignement. Using the extention method you can direct sip addresses to services in asterisk like voicemail or voice prompts. that's my ser routing for outside calls record_route(); if (uri=~"sip:0[0-9]+@"){ if (!proxy_authorize("mydomain.com", "subscriber")) {proxy_challenge("mydomain.com", "0");sl_send_reply("403", "That's not your home");break;}; #fine proxy challenge if (!is_user_in("credentials", "local")){sl_send_reply("403", "No permission for local calls");break;}; #fine invite rewritehostport("sip.mydomain.com:5090"); t_relay(); break; }; #fine if uri sip:0 inside asterisk calls forwarded by ser are treated by this extention exten => _0.,1,Dial,Zap/g1/${EXTEN:1}|45|r exten => _0.,2,Congestion its important to notice that you have to block port 5090 for incoming ip requests .... Only ser will be allowed to talk to asterisk and forward calls, after user checking. Hope it helps LB> thx LB> Alessio Focardi wrote: >>Hello Laurent, >> >>Tuesday, April 20, 2004, 4:45:41 PM, you wrote: >> >>LB> But my clients should register on SER or on Asterisk? >> >>On ser, then you will need to protect asterisk from unallowed pstn >>call, but that will come later on. >> >> >>LB> thx >> >>LB> Alessio Focardi wrote: >> >> >> >>>>Hello Laurent, >>>> >>>>Tuesday, April 20, 2004, 1:50:37 PM, you wrote: >>>> >>>>LB> In fact, my ser installation works fine... >>>>LB> I can pass call through asterisk in standalone... >>>>LB> The problem is to interconnect the 2, to register ( i don't know if it's >>>>LB> a right solution) the sipphones on SER and to go outside thanks to >>>>LB> asterisk... >>>> >>>>make asterisk use port 5090 for sip, then as a first step make >>>>asterisk register in ser as an extention. >>>> >>>>you can do this in asterisk's sip.conf >>>> >>>>example >>>> >>>>register => 10:password@sip.yourdomanin.com/10 >>>> >>>>this tells asterisk to register extention 10 as address 109(a)yourdomain.com >>>> >>>>dial 10 with a sip phone and you are in asterisk ... note that you >>>>should have an extention 10 defined, or it will not work. >>>> >>>>B> Thx >>>> >>>>LB> Alessio Focardi wrote: >>>> >>>> >>>> >>>> >>>> >>>>>>Hello Laurent, >>>>>> >>>>>>What you want to accomplish could be done, my advice is to setup a >>>>>>working installation of ser then you will continue with asterisk. >>>>>> >>>>>>At first make a simple installation of ser (no auth, no db maybe) and make >>>>>>your phones call each other. >>>>>> >>>>>>If you encounter specific problems and you want to have some help this >>>>>>is the right place. >>>>>> >>>>>>Good luck ! >>>>>> >>>>>> >>>>>> >>>>>>Tuesday, April 20, 2004, 1:29:41 PM, you wrote: >>>>>> >>>>>>LB> Hi, >>>>>>LB> I want to use SER as a sip Proxy and asterisk as a gateway to the PSTN >>>>>>LB> network ... >>>>>>LB> My sipphones are BudgetTone101 and i'm having trouble trying configure >>>>>>LB> them.... >>>>>>LB> Indeed, i don't know if they should register on SER or not... I don't >>>>>>LB> know what kind of sip messages should be passed to my machine running >>>>>>LB> asterisk. >>>>>>LB> I don't know what must be in ser.cfg ( if you've an example it could >>>>>>LB> help me a lot...)... >>>>>>LB> I wasn't able to find documentations about using Ser and Asterisk in >>>>>>LB> this configuration ( messages in the archives are not explicit >>>>>>LB> enough....) , so if you've a pointer or so.... >>>>>> >>>>>> >>>>>>LB> Help... >>>>>> >>>>>>LB> thx, >>>>>>LB> Laurent >>>>>> >>>>>>LB> _______________________________________________ >>>>>>LB> Serusers mailing list >>>>>>LB> serusers(a)lists.iptel.org >>>>>>LB> http://lists.iptel.org/mailman/listinfo/serusers >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>LB> _______________________________________________ >>>>LB> Serusers mailing list >>>>LB> serusers(a)lists.iptel.org >>>>LB> http://lists.iptel.org/mailman/listinfo/serusers >>>> >>>> >>>> >>>> >>>> >>>> >>>> >> >> >> >> >> -- Best regards, Alessio mailto:afoc@interconnessioni.it

2 2

[Serusers] Fwd: SIP Client g723.1
by Ulrich Abend 23 Apr '04

23 Apr '04

Hi, does anyone have a hint for a good windows software for Marcello including the g723.1 codec? Thanks, Uli. ----- Weitergeleitete Nachricht von Marcello Lupo <lupo(a)itspecialist.it> ----- Datum: Wed, 21 Apr 2004 23:46:35 +0200 Von: Marcello Lupo <lupo(a)itspecialist.it> Antwort an: Marcello Lupo <lupo(a)itspecialist.it> Betreff: SIP Client g723.1 An: ullstar(a)iptel.org Hi Ulrich, i hope you remember me... I hope all is good with you. We are using very happily your SER in our offices in production environment right now. Thanks a lot for all you past help. I have a question, do you know any very good client SIP Phone software running on Windows that support the G723.1 codec?? I think that it will be almost sure a commercial product but it doesn't matter. Thank you again, Bye, MArcello ----- Ende der weitergeleiteten Nachricht ----- ---------------------------------------------------------------- Diese Mail wurde über das ADM Internet Mailsystem verschickt.

4 4

[Serusers] compiling the stable rtpproxy
by Peter Boot 23 Apr '04

23 Apr '04

Is the latest stable version of the the rtpproxy still v20040105 ? I am struggling to compile it on RedHat 9 with make-3.79.1-17 I downloaded sorce files using cvs co -r v20040105 rtpproxy when I use the make install command the following error message is returned. "Makefile:33: *** missing separator. Stop. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.661 / Virus Database: 424 - Release Date: 4/19/2004

2 1

[Serusers] search in ser.conf - unknown command ??
by jimmy huang 23 Apr '04

23 Apr '04

Hi all: I am trying nathelper module refer to (http://www.informatik.uni-bremen.de/~prelle/terena/cookbook/main/ch04s07.ht…) but when run ser , it say unknown command , missing load module? and the error is if (method == "REGISTER" || ! search("^Record-Route:")) { and each line when use "search" , always says it has errors can anyone give me any idea what was wrong ? thanks jimmy

2 1

[Serusers] nathelper fix_nated_* question
by Andy Pyles 22 Apr '04

22 Apr '04

In the overly simplified version below, assuming I have 2 ip's: 192.168.0.1 , and 1.2.3.4 How do I specify which IP will be replaced? In this particular case I want it to always replace with 1.2.3.4 on packets going out, and 192.168.0.1 on the way in. From my example it's always replacing it with the internal ip. For example the following would be nice: EIP=1.2.3.4 IIP=192.168.0.1 fix_nated_contact(EIP); fix_nated_sdp(EIP); etc. if (method == "INVITE") { fix_nated_contact(); fix_nated_sdp("3") if (force_rtp_proxy("FAEE")) t_on_reply("1"); } onreply_route[1] { if (!(status=~"183" || status=~"200")) break; fix_nated_contact(); fix_nated_sdp("3"); force_rtp_proxy("FA"); }

2 3

[Serusers] rtp proxy recommendations?
by Adrian Georgescu 22 Apr '04

22 Apr '04

Hello Andy, SER MediaProxy has fail-over mechanism and achieve what you want. Using DNS SRV records you may distribute the load among any number of boxes you have. http://www.ag-projects.com/SER_Media_Proxy.html -- Adrian Hi Jan, thanks for your answer. however, How does this solution scale? I may have a large number of users behind NAT. Is it possible to have a failover.. i.e. send to to rtpproxy1, if it is down/busy send to rtpproxy2, rtpproxy3, etc? From what I can see in the source code there can only be one rtpproxy at a time. Is this correct? Or am I missing something. Is anyone deploying a large number of users using rtpproxy? What have you found? regards, Andy

1 0

[Serusers] rtp proxy recommendations?
by AG Projects support 22 Apr '04

22 Apr '04

Hello Andy, SER MediaProxy has fail-over mechanism and achieve what you want. Using DNS SRV records you may distribute the load among any number of boxes you have. http://www.ag-projects.com/SER_Media_Proxy.html -- Adrian Hi Jan, thanks for your answer. however, How does this solution scale? I may have a large number of users behind NAT. Is it possible to have a failover.. i.e. send to to rtpproxy1, if it is down/busy send to rtpproxy2, rtpproxy3, etc? From what I can see in the source code there can only be one rtpproxy at a time. Is this correct? Or am I missing something. Is anyone deploying a large number of users using rtpproxy? What have you found? regards, Andy

1 0

[Serusers] Question about SerWeb
by Sergio Diaz 22 Apr '04

22 Apr '04

I recompiled and install ser-0.8.12 in WhiteBox Linux 3. Everything its ok. I installed SerWeb-2004-01-04, but i cant create users, the page show me the users, find users, but i can't create users, no button, no tab for this. Reading the list many users can do this. Whats its the problem, any ideas ? Regards! -- Sergio Díaz Escobar. CCNA <sdiaz at comnet dot net dot mx> Network Engineer - Information Technology COMNET, S.A. DE C.V. Patriotismo 889 7o. Piso Col. Mixcoac Mexico, 039100, D.F. (52) 55 12539230 <> 121 Fax. (52) 55 12539240 Computers are unreliable, but humans are even more unreliable. Any system which depends on human reliability is unreliable. Murphy`s Law. ___________________________________________________________________ This email may be confidential and/or privileged. Only the intended recipient may access or use it. Any dissemination, distribution or copying of this email is strictly prohibited. If you are not the intended recipient please notify us immediately by return email and then erase the email. We use virus scanning software but exclude all liability for viruses or similar in any attachment or message...,..,..,.

2 1

Re: [Serusers] Error compiling Radius and ACC
by Klaus Darilion 22 Apr '04

22 Apr '04

With this command you checkout the the current (unstable) release. Maybe you have mixed ab unstable and stable versions of the modules. Delete everything ser related rm -rf /usr/local/lib/ser rm /usr/local/sbin/ser* also remove any ser-rpms if you have installed them prior. and try make, make install again klaus Harold Workman wrote: > Klaus, > > Maybe im doing something wrong...isnt > cvs -d:pserver:anonymous@cvs.ser.berlios.de:/cvsroot/ser co sip_server > > supposed to update the core as well? When I try starting ser it gives me a > 0.8.12 core not compatible error with the modules. all the modules are in > the correct path on the config.... > > -----Original Message----- > From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] > Sent: Thursday, April 22, 2004 10:32 AM > To: hworkman(a)cytelcom.com > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] Error compiling Radius and ACC > > > I did it on monday with unstable cvs and everything was fine. > > Do you have manually set the path to > /usr/local/sip_router/modules/acc/acc.so ? > > Default is /usr/local/sip_router/modules/ > and all modules are in this directory. > > klaus > > Harold Workman wrote: > >>Klaus, >> >>Thanks so much.....Using radiusclient-ng fixed the compiling > > problem....but > >>now that i have it installed im getting this when i try to start SER. I >>read the previous emails, and have already updated everything (using >>0.8.13-dev-28), make clean, and recompiled everything....still got this >>error... >> >>Apr 22 10:12:20 hstntxsipua ser: ERROR: load_module: could not open module >></usr/local/sip_router/modules/acc/acc.so>: >>/usr/local/sip_router/modules/acc/acc.so: undefined symbol: log_facility >>Apr 22 10:12:20 hstntxsipua ser: parse error (80,13-54): failed to load >>module >>Apr 22 10:12:20 hstntxsipua ser: ERROR: load_module: could not open module >></usr/local/sip_router/modules/auth_radius/auth_radius.so>: >>/usr/local/sip_router/modules/auth_radius/auth_radius.so: undefined > > symbol: > >>log_facility >> >> >> >>----------------------- >>Harold Workman >>CCNA, CCNP >>Cytel Communications >>hworkman(a)cytelcom.com >>Ph. 281-449-4000 x3098 >> >> >>-----Original Message----- >>From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] >>Sent: Thursday, April 22, 2004 9:33 AM >>To: Harold Workman >>Cc: serusers(a)lists.iptel.org >>Subject: Re: [Serusers] Error compiling Radius and ACC >> >> >>You have to use the radiusclient-ng for usntable ser: >>http://developer.berlios.de/projects/radiusclient-ng/ >> >>klaus >> >>Harold Workman wrote: >> >> >>>Hi, >>> >>>Ive got the latest ser from cvs, and cannot compile acc or radius. I have >>>already installed radius server, radius client_0-3-2 I edited the make >> >>files >> >> >>>and here is what i get when i attempt to compile them. >>> >>> >>>make[1]: Entering directory `/usr/local/sip_router/modules/acc' >>>gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall >>>-minline-all-stringops -malign-double -falign-loops -mcpu=athlon >>>-DNAME='"ser"' -DVERSION='"0.8.13-dev-28"' -DARCH='"i386"' -DOS='"linux"' >>>-DCOMPILER='"gcc 3.3"' -D__CPU_i386 -D__OS_linux >>>-DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP >>>-DDNS_IP_HACK -DUSE_IPV6 -DUSE_TCP -DDISABLE_NAGLE -DF_MALLOC -DFAST_LOCK >>>-DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 >>>-DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL >>>-DHAVE_MSGHDR_MSG_CONTROL -DRAD_ACC -I/usr/local/include -c acc.c -o acc.o >>>acc.c: In function `acc_rad_request': >>>acc.c:597: warning: passing arg 2 of `rc_avpair_add' makes integer from >> >>pointer >> >> >>>without a cast >>>acc.c:597: warning: passing arg 3 of `rc_avpair_add' makes pointer from >> >>integer >> >> >>>without a cast >>>acc.c:597: warning: passing arg 4 of `rc_avpair_add' makes integer from >> >>pointer >> >> >>>without a cast >>>acc.c:597: error: too many arguments to function `rc_avpair_add' >>>acc.c:602: warning: passing arg 2 of `rc_avpair_add' makes integer from >> >>pointer >> >> >>>without a cast >>>acc.c:602: warning: passing arg 3 of `rc_avpair_add' makes pointer from >> >>integer >> >> >>>without a cast >>>acc.c:602: warning: passing arg 4 of `rc_avpair_add' makes integer from >> >>pointer >> >> >>>without a cast >>>acc.c:602: error: too many arguments to function `rc_avpair_add' >>>acc.c:609: warning: passing arg 2 of `rc_avpair_add' makes integer from >> >>pointer >> >> >>>without a cast >>>acc.c:609: warning: passing arg 3 of `rc_avpair_add' makes pointer from >> >>integer >> >> >>>without a cast >>>acc.c:609: warning: passing arg 4 of `rc_avpair_add' makes integer from >> >>pointer >> >> >>>without a cast >>>acc.c:609: error: too many arguments to function `rc_avpair_add' >>>acc.c:614: warning: passing arg 2 of `rc_avpair_add' makes integer from >> >>pointer >> >> >>>without a cast >>>acc.c:614: warning: passing arg 3 of `rc_avpair_add' makes pointer from >> >>integer >> >> >>>without a cast >>>acc.c:614: warning: passing arg 4 of `rc_avpair_add' makes integer from >> >>pointer >> >> >>>without a cast >>>acc.c:614: error: too many arguments to function `rc_avpair_add' >>>acc.c:633: warning: passing arg 2 of `rc_avpair_add' makes integer from >> >>pointer >> >> >>>without a cast >>>acc.c:633: warning: passing arg 3 of `rc_avpair_add' makes pointer from >> >>integer >> >> >>>without a cast >>>acc.c:633: warning: passing arg 4 of `rc_avpair_add' makes integer from >> >>pointer >> >> >>>without a cast >>>acc.c:633: error: too many arguments to function `rc_avpair_add' >>>acc.c:644: warning: passing arg 2 of `rc_avpair_add' makes integer from >> >>pointer >> >> >>>without a cast >>>acc.c:644: warning: passing arg 3 of `rc_avpair_add' makes pointer from >> >>integer >> >> >>>without a cast >>>acc.c:644: warning: passing arg 4 of `rc_avpair_add' makes integer from >> >>pointer >> >> >>>without a cast >>>acc.c:644: error: too many arguments to function `rc_avpair_add' >>>acc.c:666: warning: passing arg 2 of `rc_avpair_add' makes integer from >> >>pointer >> >> >>>without a cast >>>acc.c:666: warning: passing arg 3 of `rc_avpair_add' makes pointer from >> >>integer >> >> >>>without a cast >>>acc.c:666: warning: passing arg 4 of `rc_avpair_add' makes integer from >> >>pointer >> >> >>>without a cast >>>acc.c:666: error: too many arguments to function `rc_avpair_add' >>>acc.c:677: warning: passing arg 2 of `rc_avpair_add' makes integer from >> >>pointer >> >> >>>without a cast >>>acc.c:677: warning: passing arg 3 of `rc_avpair_add' makes pointer from >> >>integer >> >> >>>without a cast >>>acc.c:677: warning: passing arg 4 of `rc_avpair_add' makes integer from >> >>pointer >> >> >>>without a cast >>>acc.c:677: error: too many arguments to function `rc_avpair_add' >>>acc.c:687: warning: passing arg 2 of `rc_avpair_add' makes integer from >> >>pointer >> >> >>>without a cast >>>acc.c:687: warning: passing arg 3 of `rc_avpair_add' makes pointer from >> >>integer >> >> >>>without a cast >>>acc.c:687: warning: passing arg 4 of `rc_avpair_add' makes integer from >> >>pointer >> >> >>>without a cast >>>acc.c:687: error: too many arguments to function `rc_avpair_add' >>>acc.c:694: warning: passing arg 1 of `rc_acct' makes integer from pointer >>>without a cast >>>acc.c:694: warning: passing arg 2 of `rc_acct' makes pointer from integer >>>without a cast >>>acc.c:694: error: too many arguments to function `rc_acct' >>>make[1]: *** [acc.o] Error 1 >>>make[1]: Leaving directory `/usr/local/sip_router/modules/acc >>> >>> >>> >>> >>>Harold Workman >>>CCNA, CCNP >>>Cytel Communications >>>hworkman(a)cytelcom.com >>>Ph. 281-449-4000 x3098 >>> >>> >>> >>> >>> >>>---------------------------------------------------------------- >>>This message was sent using IMP, the Internet Messaging Program. >>> >>>_______________________________________________ >>>Serusers mailing list >>>serusers(a)lists.iptel.org >>>http://lists.iptel.org/mailman/listinfo/serusers >>> >>> >> >> >> > >

1 0

[Serusers] Error compiling Radius and ACC
by Harold Workman 22 Apr '04

22 Apr '04

Hi, Ive got the latest ser from cvs, and cannot compile acc or radius. I have already installed radius server, radius client_0-3-2 I edited the make files and here is what i get when i attempt to compile them. make[1]: Entering directory `/usr/local/sip_router/modules/acc' gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall -minline-all-stringops -malign-double -falign-loops -mcpu=athlon -DNAME='"ser"' -DVERSION='"0.8.13-dev-28"' -DARCH='"i386"' -DOS='"linux"' -DCOMPILER='"gcc 3.3"' -D__CPU_i386 -D__OS_linux -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_TCP -DDISABLE_NAGLE -DF_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DRAD_ACC -I/usr/local/include -c acc.c -o acc.o acc.c: In function `acc_rad_request': acc.c:597: warning: passing arg 2 of `rc_avpair_add' makes integer from pointer without a cast acc.c:597: warning: passing arg 3 of `rc_avpair_add' makes pointer from integer without a cast acc.c:597: warning: passing arg 4 of `rc_avpair_add' makes integer from pointer without a cast acc.c:597: error: too many arguments to function `rc_avpair_add' acc.c:602: warning: passing arg 2 of `rc_avpair_add' makes integer from pointer without a cast acc.c:602: warning: passing arg 3 of `rc_avpair_add' makes pointer from integer without a cast acc.c:602: warning: passing arg 4 of `rc_avpair_add' makes integer from pointer without a cast acc.c:602: error: too many arguments to function `rc_avpair_add' acc.c:609: warning: passing arg 2 of `rc_avpair_add' makes integer from pointer without a cast acc.c:609: warning: passing arg 3 of `rc_avpair_add' makes pointer from integer without a cast acc.c:609: warning: passing arg 4 of `rc_avpair_add' makes integer from pointer without a cast acc.c:609: error: too many arguments to function `rc_avpair_add' acc.c:614: warning: passing arg 2 of `rc_avpair_add' makes integer from pointer without a cast acc.c:614: warning: passing arg 3 of `rc_avpair_add' makes pointer from integer without a cast acc.c:614: warning: passing arg 4 of `rc_avpair_add' makes integer from pointer without a cast acc.c:614: error: too many arguments to function `rc_avpair_add' acc.c:633: warning: passing arg 2 of `rc_avpair_add' makes integer from pointer without a cast acc.c:633: warning: passing arg 3 of `rc_avpair_add' makes pointer from integer without a cast acc.c:633: warning: passing arg 4 of `rc_avpair_add' makes integer from pointer without a cast acc.c:633: error: too many arguments to function `rc_avpair_add' acc.c:644: warning: passing arg 2 of `rc_avpair_add' makes integer from pointer without a cast acc.c:644: warning: passing arg 3 of `rc_avpair_add' makes pointer from integer without a cast acc.c:644: warning: passing arg 4 of `rc_avpair_add' makes integer from pointer without a cast acc.c:644: error: too many arguments to function `rc_avpair_add' acc.c:666: warning: passing arg 2 of `rc_avpair_add' makes integer from pointer without a cast acc.c:666: warning: passing arg 3 of `rc_avpair_add' makes pointer from integer without a cast acc.c:666: warning: passing arg 4 of `rc_avpair_add' makes integer from pointer without a cast acc.c:666: error: too many arguments to function `rc_avpair_add' acc.c:677: warning: passing arg 2 of `rc_avpair_add' makes integer from pointer without a cast acc.c:677: warning: passing arg 3 of `rc_avpair_add' makes pointer from integer without a cast acc.c:677: warning: passing arg 4 of `rc_avpair_add' makes integer from pointer without a cast acc.c:677: error: too many arguments to function `rc_avpair_add' acc.c:687: warning: passing arg 2 of `rc_avpair_add' makes integer from pointer without a cast acc.c:687: warning: passing arg 3 of `rc_avpair_add' makes pointer from integer without a cast acc.c:687: warning: passing arg 4 of `rc_avpair_add' makes integer from pointer without a cast acc.c:687: error: too many arguments to function `rc_avpair_add' acc.c:694: warning: passing arg 1 of `rc_acct' makes integer from pointer without a cast acc.c:694: warning: passing arg 2 of `rc_acct' makes pointer from integer without a cast acc.c:694: error: too many arguments to function `rc_acct' make[1]: *** [acc.o] Error 1 make[1]: Leaving directory `/usr/local/sip_router/modules/acc Harold Workman CCNA, CCNP Cytel Communications hworkman(a)cytelcom.com Ph. 281-449-4000 x3098 ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

2 3

[Serusers] ser- b2bua config/scenario question
by a.pletli＠euromacc.hu 22 Apr '04

22 Apr '04

> Hello! > > Plese help me, if possible! > I have a SER server and Vocal b2bua on my linux server. I would like make > a simple prepaid > application whith these components. > I'm beginner in SIP, therefore excuse me for stupid questions. > SER works fine without b2bua, sends accounting messages to the freeradius > server, but can't hang up > conversation depend on user balance amount. > Therefore i need a b2ua, that watches the sessions, and starts a timer > (vocal 2b2ua be able to do it ) > > How works b2bua in this plan? Need i one b2bua between two SER servers for > calltime controll? > > Are there any other simple free solutions for prepaid billing with SER? > > Is there anyone who use b2bua with SER server? If yes, please send a > configuration hint for me! > > Thank you. > > Regards, > > Antal Pletli > > email: a.pletli(a)euromacc.hu

1 0

[Serusers] sectl
by gaillac harry 22 Apr '04

22 Apr '04

Hi, I've still ap problem with serctl domain show. here is the response"500 command 'domain_dump' not available". What may i do ????? Harry

3 2

[Serusers] SERWEB+SER
by gaillac harry 22 Apr '04

22 Apr '04

Here is my ser.cfg.SER don't start because of acc module anybody could help me to solved this problem before an other ? ser -c => 0(6238) set_mod_param_regex: parameter <db_url> not found in module <acc> 0(6238) parse error (96,60-61): Can't set module parameter 0(6238) set_mod_param_regex: parameter <db_missed_flag> not found in module <acc> 0(6238) parse error (97,36-37): Can't set module parameter 0(6238) parse error (195,63-64): unknown command, missing loadmodule? ERROR: bad config file (3 errors) regards # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=9 fork=yes log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 listen=192.168.0.1 children=4 fifo="/tmp/ser_fifo" fifo_mode=0666 #alias="example.com" # ------------------ module:wq loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/msilo.so" loadmodule "/usr/lib/ser/modules/vm.so" loadmodule "/usr/lib/ser/modules/acc.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("usrloc", "db_mode", 1) #modparam("usrloc", "use_domain", 1) # --register params-- modparam("registrar", "use_domain", 1) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # --domain module-- modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("domain", "db_mode", 1) modparam("domain", "domain_table", "domain") modparam("domain", "domain_col", "domain") # --msilo params-- modparam("msilo", "registrar", "sip:registrar@example.com") modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser") # --vm params-- modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser") # --acc params-- modparam("acc", "log_level", 1) modparam("acc", "log_flag", 2) modparam("acc", "log_missed_flag", 2) modparam("acc", "log_fmt", "fimos") modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("acc", "db_missed_flag", 2) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (is_from_local()) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("", "subscriber")) { www_challenge("", "0"); break; }; save("location"); m_dump(); break; }; # native SIP destinations are handled using our USRLOC DB lookup("aliases"); if (!lookup("location")) { if (method == "MESSAGE") { if (!t_newtran()) { sl_reply_error(); break; }; if (m_store("0")) { t_reply("202", "Accepted for Later Delivery"); break; }; t_reply("503", "Service Unavailable"); break; }; }; if ((method=="INVITE" || method=="ACK") && t_newtran() ) { t_reply("404", "Not Found"); route(3); break; }; }; setflag(2); # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP t_on_failure("1"); # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } route[3] { # non-Voip -- just send "off-line" if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { sl_send_reply("404", "Not Found"); break; }; if (t_newtran()) { t_reply("404", "Not Found"); acc_db_request("404 missed call", "missed_calls"); }; }

3 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2004