sr-users May 2004

sr-users@lists.kamailio.org

154 participants
333 discussions

RE: [Serusers] pc2pc problem
by Kapil Dhawan 21 May '04

21 May '04

Are you having any client behind NAT and have you taken care of NAT >From: "andayesh" <andayesh(a)digitalclone.net> >To: <serusers(a)lists.iptel.org> >Subject: [Serusers] pc2pc problem >Date: Thu, 20 May 2004 14:34:15 +0430 > >Hi all, > >For a PC2PC session to establish properly, the following signaling sequence >should occur between the clients: > >Client1 ---> INVITE ---> Client2 > <--- 200 OK <--- > ----> ACK ----> > >Client2 will get into the CONNECTED state only after it gets the ACK >response from Client1. According to the logs, INVITE/200 OK works fine, >however, the final ACK response sent by Client1 does not make it to the >Client2, i.e. Client2 does not get it. So after about 30 seconds, Client2 >hits a transaction timeout and sends a BYE request back to Client1. >According to the logs, even this BYE request does not make it to Client1, >so >Client1 remains in the CONNECTED state. > >Can you help me on this topic? > > >Thanks >Keyvan > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers _________________________________________________________________ Earn without investing. http://go.msnserver.com/IN/48713.asp Sell anything on www.baazee.com.

1 0

[Serusers] ser.cfg
by Tjapko ITS Consult＠ncy 20 May '04

20 May '04

Hello List, Is there a way to check the integrity of the ser.cfg file in case I made an error in this file? I have an error in my ser.cfg but like to know for example on what line the error is. Is there a way to check this? Tjapko --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.688 / Virus Database: 449 - Release Date: 18/05/2004

4 6

[Serusers] Another question on serweb
by Luis Vazquez 20 May '04

20 May '04

There is a logout.php in the user_interface directory but after logging in I don't find any logout button in my_account.php. Doing a grep I find a reference to logout.php in page.php but It is not displayed in any tab when I'm logged in??. Am I missing something? Best regards Luis

1 0

Re: [Serusers] CDR with ser?
by Daniel-Constantin Mierla 20 May '04

20 May '04

Is likely to be a nat traversal issue. It might be the wrong ser configuration, firewall/nat configuration on dhcp server. I never played with estara phone so I can't say if there are some well-known issues with that phone. That's why you should ALWAYS cc to the mailing list, the knowledge base and the responsiveness is much higher. From your ethereal snippet I see that the dhcp server can't reach the sip server. That is obvious a problem since dhcp server does NAT. You have to check your network configuration. .Daniel On 5/20/2004 3:55 PM, varala ramakanth wrote: >hello danil, > >firstly thanks for the response > >my scenario is > >public ip(softphone) -- public ip (ser)-- >dhcp(nat)--private ip(softphone) > >no ip tables are running > >ser is in linux box and ua s are in windows > > >1) ser of cvs stable version in iptel.org > >compiled and executed > >copied ser.cfg with ser_nat_running.cfg > >in /etc/ser/.. > > >the message came on terminal is when i started ./ser >------------------------------------------------------------ >Listening on > 127.0.0.1 [127.0.0.1]:5060 > public ip of ser [public ip of ser]:5060 >Aliases:<domain name of my ser server>:5060 >localhost:5060 localhost.localdomain:5060 >stateless - initializing >Maxfwd module- initializing >textops - initializing > 0(0) INFO: udp_init: SO_RCVBUF is initially 65535 > 0(0) INFO: udp_init: SO_RCVBUF is finally 131070 > 0(0) INFO: udp_init: SO_RCVBUF is initially 65535 > 0(0) INFO: udp_init: SO_RCVBUF is finally 131070 >[root@server sip_router]# 9(0) INFO: fifo process >starting: 1380 > 9(1380) SER: open_uac_fifo: fifo server up at >/tmp/ser_fifo... >_______________________________________________ > > > >in ethereal report i have seen that while private ip >is registering with ser server >_______________________________________________________ ><ser server ip>-> <dhcp servver ip> UDP Source port: >5060 Destination port: 62402[Malformed Packet] > 30.180686 <dhcp server> -><public ip of ser>ICMP >Destination unreachable >__________________________________________________ > > >after useragents starts conversation( estara >softphone) > >rtp packets are running but i could not able to listen >audio > >iam using rtpproxy and started with ./rtpproxy -f > > >rtpproxy:new session on a port 35000 >rtpproxy:lookup on a prot 35000 >rttpproxy: addr1 filled in:<the first user agentip> >rttpproxy: addr1 filled in :<the second user agent ip> > >__________________________________________________________ > > > >and i could not hear any voice in between any of >softphone > >please guide me >with regards >rama kanth > >--- Daniel-Constantin Mierla <daniel(a)iptel.org> wrote: > > >>Hello, >>to get the CDRs you need the acc module. Searching >>in mailing list >>archive you will find a lot of examples/hints (using >>magic google search >>for 'accounting site:mail.iptel.org'). >> >>The other problems scream for more details to >>troubleshoot. >> >>.Daniel >> >>On 5/20/2004 6:13 AM, varala ramakanth wrote: >> >> >> >>>hello friends, >>> >>>can we get the Call Deatils Records with the ser. >>> >>>i am using the stable version of the ser . >>> >>>has any body got sucess with the ser in private >>> >>> >>ips >> >> >>>i tried with help of a friend call is established >>> >>>but i could not able to here the audio on both >>> >>> >>sides >> >> >>>so can any body guide me >>> >>>with regards >>>rama kanth >>> >>> >>> >>> >>> >>>__________________________________ >>>Do you Yahoo!? >>>Yahoo! Domains – Claim yours for only $14.70/year >>>http://smallbusiness.promotions.yahoo.com/offer >>> >>>_______________________________________________ >>>Serusers mailing list >>>serusers(a)lists.iptel.org >>>http://lists.iptel.org/mailman/listinfo/serusers >>> >>> >>> >>> >>> > > >__________________________________________________ >Do You Yahoo!? >Tired of spam? Yahoo! Mail has the best spam protection around >http://mail.yahoo.com > > >

1 0

[Serusers] pc2pc problem
by andayesh 20 May '04

20 May '04

Hi, In the case of following script in configuration file, client1's ack would not reach the client1, but if I comment "record_route();" everything will works fine. if (method=="INVITE") { log(1, "INVITE\n"); record_route(); }; What's the problem with my config file: # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes debug=2 log_stderror=yes */ debug=255 check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/print.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/group_radius.so" loadmodule "/usr/local/lib/ser/modules/uri_radius.so" loadmodule "/usr/local/lib/ser/modules/pa.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/xlog.so" #loadmodule "/usr/local/lib/ser/modules/jabber.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- modparam("auth_radius", "radius_config","/usr/local/etc/radiusclient/radiusclient.conf") modparam("registrar", "default_expires", 120) modparam("registrar", "use_domain", 1) # -- usrloc params -- modparam("usrloc", "use_domain", 1) modparam("usrloc", "db_mode", 0) # -- jabber params -- #modparam("jabber", "db_url", "sql://ser:dclone@217.11.17.36/ser") #modparam("jabber", "jaddress", "localhost") #modparam("jabber", "jport", 5222) #modparam("jabber","workers",2) #modparam("jabber","max_jobs",10) #modparam("jabber","cache_time",200) #modparam("jabber","delay_time",60) #modparam("jabber","jdomain","wcpserver.digitalclone.net=*") #modparam("jabber", "jdomain", "wcpserver.digitalclone.net=*") #modparam("jabber","aliases","4;yahoo.wcpserver.digitalclone.net") #modparam("jabber","aliases","4;aim.wcpserver.digitalclone.net;icq.wcpserver .digitalclone.net;msn.wcpserver.digitalclone.net=%;yahoo.wcpserver.digitalcl one.net;") # -- usrloc params -- modparam("auth_db", "db_url","sql://ser:dclone@217.11.17.36/ser") modparam("usrloc", "db_url","sql://ser:dclone@217.11.17.36/ser") #modparam("acc", "db_url","sql://ser:dclone@217.11.17.36/ser") #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # -- acc params -- modparam("acc", "log_level", 1) # that is the flag for which we will account -- don't forget to # set the same one :-) #modparam("acc", "log_flag", 1 ) modparam("acc", "radius_flag", 1 ) modparam("xlog", "buf_size", 8192) # ------------------------- request routing logic ------------------- # main routing logic route { xlog("L_WARN ", "\n\n time [%Tf]\n method <%rm>\n r-uri <%ru>\n call-id <%ci >\n cseq <%cs>\n contact header <%ct>\n From uri <%fu>\n From tag <%ft>\n"); xlog("L_WARN ", "To uri <%tu>\n To tag <%tt>\n SIP message id <%mi>\n IP source address <%is>\n\n"); if ( !mf_process_maxfwd_header("10") ) { sl_send_reply("483","To Many Hops"); drop(); }; /* record-route INVITEs -- all subsequent requests must visit us */ if (method=="INVITE") { log(1, "INVITE\n"); # record_route(); }; # for testing purposes, simply okay all REGISTERs if (method=="REGISTER") { log(1, "Register\n"); if (t_newtran()) { save("location"); log("REGISTER received -> reply okay\n"); }; if(search("egistration")) { log(1, "egistration\n"); sl_send_reply("200", "Accepted"); } else { log(1, "not egisteration\n"); sl_send_reply("200", "Accepted"); }; break; }; if (method=="SUBSCRIBE") { log(1, "Subscribe\n"); if (t_newtran()) { log(1, "Registrar\n"); handle_subscription("registrar"); }; break; }; if (method=="ACK") { log(1, "ACK\n"); break; }; if (method=="BYE") { log(1, "BYE\n"); break; }; if (method=="CANCEL") { log(1, "CANCEL\n"); break; }; if (method=="INFO") { log(1, "INFO\n"); break; }; if (method=="MESSAGE") { log(1, "MESSAGE\n"); break; }; if (method=="NOTIFY") { log(1, "NOTIFY\n"); break; }; if (method=="UNSUBSCRIBE") { log(1, "UNSubscribe\n"); break; }; #forward international N digit requests to gateway if(uri=~"^sip:[0-9]*@") { rewritehostport("217.218.68.12:5060"); log(1,">>>>>>>>>>>>international expression match\n"); #addRecordRoute(); route(2); break; }; if(!lookup("location")) { sl_send_reply("404","Not found"); break; }; if (!t_relay()) { log(1, "t_relay\n"); sl_reply_error(); }; setflag(1); } route[2] { forward(uri:host, uri:port); log(1,"route[2]:SIP-to-PSTN call routed\n"); if(!t_relay()) { sl_reply_error(); }; }

1 0

[Serusers] CDR with ser?
by varala ramakanth 20 May '04

20 May '04

hello friends, can we get the Call Deatils Records with the ser. i am using the stable version of the ser . has any body got sucess with the ser in private ips i tried with help of a friend call is established but i could not able to here the audio on both sides so can any body guide me with regards rama kanth __________________________________ Do you Yahoo!? Yahoo! Domains � Claim yours for only $14.70/year http://smallbusiness.promotions.yahoo.com/offer

2 1

[Serusers] jabber help!
by lihongbin 20 May '04

20 May '04

hi at ser.cfg and jabbergateway ,how do a action of the search("egistration") exec?what message includes "egistration" section? I am configuring a ser server with a jabber gataway,jabber server is a public server :jabber.com.cn ,but when starting ser ,how to jump this code exec jab_go_online() and register to jabber server.I capture the package with a ethereal tool,but I did not find any packeges including a egistration part.l please help me!! ....................... if (method=="REGISTER") { if (t_newtran()) { save("location"); log("REGISTER received -> reply okay\n"); }; if(search("egistration")) { log("XJAB: Going ONline in Jabber network!!!\n"); if(jab_go_online()) { sl_send_reply("200", "Accepted"); } else { sl_send_reply("404","Not found"); }; } else { log("XJAB: Going OFFline in Jabber network!!!\n"); if(jab_go_offline()) { sl_send_reply("200", "Accepted"); } else { sl_send_reply("404","Not found"); }; }; break; }; if (method=="SUBSCRIBE") { if (t_newtran()) { handle_subscription("registrar"); }; break; }; ......................................... best regards!! Thanks a lot!!

2 1

[Serusers] help£¡about SER and NAT (RTPPROXY)
by sky0912＠vip.sina.com 20 May '04

20 May '04

Hello list: i run rtpproxy and ser.i use command ./rtppoxy ? run the command.UA --NAT--SER--UA it no problem. ua1--ua2--nat--ser(behind one NAT callee and caller)it no voice . how is transmit across one ip address?thanks May 16 19:50:31 DemoGK_BackupDB /usr/local/sbin/ser[19318]: ERROR: send_rtpp_command: can't connect to RTP proxy May 16 19:50:31 DemoGK_BackupDB /usr/local/sbin/ser[19337]: WARNING: rtpp_test: can't get version of the RTP proxy May 16 19:50:32 DemoGK_BackupDB /usr/local/sbin/ser[19337]: WARNING: rtpp_test: support for RTP proxyhas been disabled tempora rily May 20 01:06:45 DemoGK_BackupDB /usr/local/sbin/ser[1102]: ERROR: parse_msg: message=<> May 20 01:06:45 DemoGK_BackupDB /usr/local/sbin/ser[1102]: ERROR: receive_msg: parse_msg failed May 20 01:07:16 DemoGK_BackupDB /usr/local/sbin/ser[1101]: WARNING: upstream bug - 0-terminated packet ______________________________________ ===================================================================

1 0

[Serusers] Question regarding Transaction
by Zeus Ng 20 May '04

20 May '04

When is a transaction created? Is it when any of t_relay(), t_newtran(), t_forward* functions run. If yes, then what method should we use t_newtran()? I'm assuming REGISTER should not get t_newtran() unless it is forwarded from a proxy to a location server, right? Zeus Ng

2 1

[Serusers] how to retrieve voicemail
by wiggler 20 May '04

20 May '04

Hi everyone, I have a question. I have a working voicemail now using sems+voicemail. If I called an offline user it I could record a voice message and sems sends an email to his email account successfully. If I am the user, How can I retrieve the voice message(wav) that was sent on my email? I have a serweb running but when I access the voicemail tab, there's no voicemail mail file display, what configuration should I need to so I could retrieve my voicemail. Thanks a lot. -- www.bembang.com

1 0

← Newer
1
...
11
12
13
14
15
16
17
...
34
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2004