sr-users May 2004

sr-users@lists.kamailio.org

154 participants
333 discussions

by Atle Samuelsen

Hey Guys! First, thanks for a great mailinglist! How is it possible to either set maximum Reinvites when there is no "reply" from the device, Im am using RecordRouteing..? The reson why I want to do this is because If a user is temporary offline, I want to push him QUICK to a announcement. Anybody had this scenario before? and got an Idea on how to do this? I had 2 toughts, 1: Count invites, and set a flag, if f.eks some reply from phone etc, it will set counter to 0 again, and start looking for reinvites. This idea died because SER does'nt show me the reinvites it sends. 2: Use modparam("tm", "retr_timer2", 8), Tho this did'nt work for some werid reson. - Atle

20 years, 9 months

[Serusers] Problem in SER 0.8.12 & CPL-C Module

by Avkash

Dear Friends, I am trying to use CPL-C module along with SER 0.8.12. I have compiled 0.8.12 and patched with tm.patch. Now when i try to start SER i get given error: --------------- ERROR --------------------------------------- 0(12455) loading module /usr/local/lib/ser/modules/mysql.so 0(12455) loading module /usr/local/lib/ser/modules/sl.so 0(12455) loading module /usr/local/lib/ser/modules/tm.so 0(12455) ERROR: load_module: could not open module </usr/local/lib/ser/modules/tm.so>: /usr/local/l ib/ser/modules/tm.so: undefined symbol: run_failure_handlers -------------- END ERROR --------------------------- Please help me to solve this problem. I am in urgency to run CPL with SER. Any help would be greatly appreciated!! Thanks, -- Avkash Chauhan

20 years, 9 months

[Serusers] About the SERWEB

by maxsu

Dear Sir I had installed and used the SER for a while.... But I hope that I could use the WEB interface to do some configurations or view some users.... Is this SERWEB doing...? If this is.....could you please provide me the install procedure for the SERWEB....? Thanks

20 years, 9 months

Re: [Serusers] Fork

by Kapil Dhawan

Yeah first is solved... Second is if i have three users 111 222 333...111 called up 222 and they are talking with the beloew mentioned NAT file (as ser.cfg) if i make a call from 333 to 111 or 333 to 222.....both parties get RING.......if 333 called up 111 then 333 and 111 will get ring as if 111 is not busy...... >From: Jiri Kuthan <jiri(a)iptel.org> >To: "Kapil Dhawan" <sersavvy(a)hotmail.com>, serusers(a)lists.iptel.org >Subject: Re: [Serusers] Fork >Date: Tue, 04 May 2004 09:32:01 +0200 > >At 09:29 AM 5/4/2004, Kapil Dhawan wrote: > >Hi > > > >I am using the stable version of SER and rtpproxy....it is working fine >as such and i am able to get phones registered.....and can make >calls....Now....if i use fork=no with the same file....SER is unable to >process Register Requests... > >so set fork=yes > > >it does nothin for a register request...it just doesn't respond but for >fork=yes it works correctly....i know fork is used to fork the request to >more than one locations.. > >the config option 'fork' is unrelated to SIP forking, it is a debugging >mode in which >children processes are nto forked. > >-jiri > > > >Could u pls clarify it.... > > > > > >Second...i am using two grandstream phones and i can talk....but if i >make a call from third phone to any of two..instead of busy tone...i get >Ring...on the caller as well as callee side.... > >following is my ser.cfg > > > ># > ># $Id: nathelper.cfg,v 1.1.2.1 2003/11/24 14:47:18 janakj Exp $ > ># > ># simple quick-start config script including nathelper support > > > ># This default script includes nathelper support. To make it work > ># you will also have to install Maxim's RTP proxy. The proxy is enforced > ># if one of the parties is behind a NAT. > ># > ># If you have an endpoing in the public internet which is known to > ># support symmetric RTP (Cisco PSTN gateway or voicemail, for example), > ># then you don't have to force RTP proxy. If you don't want to enforce > ># RTP proxy for some destinations than simply use t_relay() instead of > ># route(1) > ># > ># Sections marked with !! Nathelper contain modifications for nathelper > ># > ># NOTE !! This config is EXPERIMENTAL ! > ># > ># ----------- global configuration parameters ------------------------ > > > >debug=3 # debug level (cmd line: -dddddddddd) > >fork=yes > >log_stderror=no # (cmd line: -E) > > > >/* Uncomment these lines to enter debugging mode > >fork=no > >log_stderror=yes > >*/ > > > >check_via=no # (cmd. line: -v) > >dns=no # (cmd. line: -r) > >rev_dns=no # (cmd. line: -R) > >port=5060 > >children=4 > >fifo="/tmp/ser_fifo" > > > ># ------------------ module loading ---------------------------------- > > > ># Uncomment this if you want to use SQL database > >#loadmodule "/usr/local/lib/ser/modules/mysql.so" > > > >loadmodule "/usr/local/lib/ser/modules/sl.so" > >loadmodule "/usr/local/lib/ser/modules/tm.so" > >loadmodule "/usr/local/lib/ser/modules/rr.so" > >loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > >loadmodule "/usr/local/lib/ser/modules/usrloc.so" > >loadmodule "/usr/local/lib/ser/modules/registrar.so" > >loadmodule "/usr/local/lib/ser/modules/textops.so" > > > ># Uncomment this if you want digest authentication > ># mysql.so must be loaded ! > >#loadmodule "/usr/local/lib/ser/modules/auth.so" > >#loadmodule "/usr/local/lib/ser/modules/auth_db.so" > > > ># !! Nathelper > >loadmodule "/usr/local/lib/ser/modules/nathelper.so" > > > ># ----------------- setting module-specific parameters --------------- > > > ># -- usrloc params -- > > > >modparam("usrloc", "db_mode", 0) > > > ># Uncomment this if you want to use SQL database > ># for persistent storage and comment the previous line > >#modparam("usrloc", "db_mode", 2) > > > ># -- auth params -- > ># Uncomment if you are using auth module > ># > >#modparam("auth_db", "calculate_ha1", yes) > ># > ># If you set "calculate_ha1" parameter to yes (which true in this >config), > ># uncomment also the following parameter) > ># > >#modparam("auth_db", "password_column", "password") > > > ># -- rr params -- > ># add value to ;lr param to make some broken UAs happy > >modparam("rr", "enable_full_lr", 1) > > > ># !! Nathelper > >modparam("registrar", "nat_flag", 6) > >modparam("nathelper", "natping_interval", 30) # Ping interval 30 s > >modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind >NAT > > > ># ------------------------- request routing logic ------------------- > > > ># main routing logic > > > >route{ > > > > # initial sanity checks -- messages with > > # max_forwards==0, or excessively long requests > > if (!mf_process_maxfwd_header("10")) { > > sl_send_reply("483","Too Many Hops"); > > break; > > }; > > if (msg:len >= max_len ) { > > sl_send_reply("513", "Message too big"); > > break; > > }; > > > > # !! Nathelper > > # Special handling for NATed clients; first, NAT test is > > # executed: it looks for via!=received and RFC1918 addresses > > # in Contact (may fail if line-folding is used); also, > > # the received test should, if completed, should check all > > # vias for rpesence of received > > if (nat_uac_test("3")) { > > # Allow RR-ed requests, as these may indicate that > > # a NAT-enabled proxy takes care of it; unless it is > > # a REGISTER > > > > if (method == "REGISTER" || ! search("^Record-Route:")) { > > log("LOG: Someone trying to register from private IP, >rewriting\n"); > > > > # This will work only for user agents that support >symmetric > > # communication. We tested quite many of them and >majority is > > # smart enough to be symmetric. In some phones it >takes a configuration > > # option. With Cisco 7960, it is called >NAT_Enable=Yes, with kphone it is > > # called "symmetric media" and "symmetric >signalling". > > > > fix_nated_contact(); # Rewrite contact with source IP >of signalling > > if (method == "INVITE") { > > fix_nated_sdp("1"); # Add direction=active to SDP > > }; > > force_rport(); # Add rport parameter to topmost Via > > setflag(6); # Mark as NATed > > }; > > }; > > > > # we record-route all messages -- to make sure that > > # subsequent messages will go through our proxy; that's > > # particularly good if upstream and downstream entities > > # use different transport protocol > > if (!method=="REGISTER") record_route(); > > > > # subsequent messages withing a dialog should take the > > # path determined by record-routing > > if (loose_route()) { > > # mark routing logic in request > > append_hf("P-hint: rr-enforced\r\n"); > > route(1); > > break; > > }; > > > > if (!uri==myself) { > > # mark routing logic in request > > append_hf("P-hint: outbound\r\n"); > > route(1); > > break; > > }; > > > > # if the request is for other domain use UsrLoc > > # (in case, it does not work, use the following command > > # with proper names and addresses in it) > > if (uri==myself) { > > > > if (method=="REGISTER") { > > > ># Uncomment this if you want to use digest authentication > ># if (!www_authorize("iptel.org", "subscriber")) { > ># www_challenge("iptel.org", "0"); > ># break; > ># }; > > > > save("location"); > > break; > > }; > > > > lookup("aliases"); > > if (!uri==myself) { > > append_hf("P-hint: outbound alias\r\n"); > > route(1); > > break; > > }; > > > > # native SIP destinations are handled using our USRLOC DB > > if (!lookup("location")) { > > sl_send_reply("404", "Not Found"); > > break; > > }; > > }; > > append_hf("P-hint: usrloc applied\r\n"); > > route(1); > >} > > > >route[1] > >{ > > # !! Nathelper > > if (uri=~"[@:](192\.168\.|10\.|172\.(1[6-9]|2[0-9]|3[0-1])\.)" && >!search("^Route:")){ > > sl_send_reply("479", "We don't forward to private IP >addresses"); > > break; > > }; > > > > # if client or server know to be behind a NAT, enable relay > > if (isflagset(6)) { > > force_rtp_proxy(); > > }; > > > > # NAT processing of replies; apply to all transactions (for >example, > > # re-INVITEs from public to private UA are hard to identify as > > # NATed at the moment of request processing); look at replies > > t_on_reply("1"); > > > > # send it out now; use stateful forwarding as it works reliably > > # even for UDP2TCP > > if (!t_relay()) { > > sl_reply_error(); > > }; > >} > > > ># !! Nathelper > >onreply_route[1] { > > # NATed transaction ? > > if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") { > > fix_nated_contact(); > > force_rtp_proxy(); > > # otherwise, is it a transaction behind a NAT and we did not > > # know at time of request processing ? (RFC1918 contacts) > > } else if (nat_uac_test("1")) { > > fix_nated_contact(); > > }; > >} > > > >_________________________________________________________________ > >Send flowers in 24 hours! > >http://www.fabmall.com/affiliatehtml/redir/nl7.asp At MSN Shopping. > > > >_______________________________________________ > >Serusers mailing list > >serusers(a)lists.iptel.org > >http://lists.iptel.org/mailman/listinfo/serusers > >-- >Jiri Kuthan http://iptel.org/~jiri/ > _________________________________________________________________ Sports, sports and more sports! Keep up with all thats happening! http://www.msn.co.in/sports/ Stay connected with MSN Sports!

20 years, 9 months

[Serusers] Fork

by Kapil Dhawan

Hi I am using the stable version of SER and rtpproxy....it is working fine as such and i am able to get phones registered.....and can make calls....Now....if i use fork=no with the same file....SER is unable to process Register Requests...it does nothin for a register request...it just doesn't respond but for fork=yes it works correctly....i know fork is used to fork the request to more than one locations.. Could u pls clarify it.... Second...i am using two grandstream phones and i can talk....but if i make a call from third phone to any of two..instead of busy tone...i get Ring...on the caller as well as callee side.... following is my ser.cfg # # $Id: nathelper.cfg,v 1.1.2.1 2003/11/24 14:47:18 janakj Exp $ # # simple quick-start config script including nathelper support # This default script includes nathelper support. To make it work # you will also have to install Maxim's RTP proxy. The proxy is enforced # if one of the parties is behind a NAT. # # If you have an endpoing in the public internet which is known to # support symmetric RTP (Cisco PSTN gateway or voicemail, for example), # then you don't have to force RTP proxy. If you don't want to enforce # RTP proxy for some destinations than simply use t_relay() instead of # route(1) # # Sections marked with !! Nathelper contain modifications for nathelper # # NOTE !! This config is EXPERIMENTAL ! # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" # !! Nathelper loadmodule "/usr/local/lib/ser/modules/nathelper.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # !! Nathelper modparam("registrar", "nat_flag", 6) modparam("nathelper", "natping_interval", 30) # Ping interval 30 s modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; }; # !! Nathelper # Special handling for NATed clients; first, NAT test is # executed: it looks for via!=received and RFC1918 addresses # in Contact (may fail if line-folding is used); also, # the received test should, if completed, should check all # vias for rpesence of received if (nat_uac_test("3")) { # Allow RR-ed requests, as these may indicate that # a NAT-enabled proxy takes care of it; unless it is # a REGISTER if (method == "REGISTER" || ! search("^Record-Route:")) { log("LOG: Someone trying to register from private IP, rewriting\n"); # This will work only for user agents that support symmetric # communication. We tested quite many of them and majority is # smart enough to be symmetric. In some phones it takes a configuration # option. With Cisco 7960, it is called NAT_Enable=Yes, with kphone it is # called "symmetric media" and "symmetric signalling". fix_nated_contact(); # Rewrite contact with source IP of signalling if (method == "INVITE") { fix_nated_sdp("1"); # Add direction=active to SDP }; force_rport(); # Add rport parameter to topmost Via setflag(6); # Mark as NATed }; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # !! Nathelper if (uri=~"[@:](192\.168\.|10\.|172\.(1[6-9]|2[0-9]|3[0-1])\.)" && !search("^Route:")){ sl_send_reply("479", "We don't forward to private IP addresses"); break; }; # if client or server know to be behind a NAT, enable relay if (isflagset(6)) { force_rtp_proxy(); }; # NAT processing of replies; apply to all transactions (for example, # re-INVITEs from public to private UA are hard to identify as # NATed at the moment of request processing); look at replies t_on_reply("1"); # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } # !! Nathelper onreply_route[1] { # NATed transaction ? if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") { fix_nated_contact(); force_rtp_proxy(); # otherwise, is it a transaction behind a NAT and we did not # know at time of request processing ? (RFC1918 contacts) } else if (nat_uac_test("1")) { fix_nated_contact(); }; } _________________________________________________________________ Send flowers in 24 hours! http://www.fabmall.com/affiliatehtml/redir/nl7.asp At MSN Shopping.

20 years, 9 months

[Serusers] PLEASE HELP very simple Dial plan (hotline feature)

by Humberto Atristain

Hello Guys Please help me with this issue I have 1 fxo gateway with each port registerd as a SIP user IP: 192.168.10.253 Port 1 : 201(a)192.168.10.253 Port 2 : 202(a)192.168.10.253 So on I have in the other side a Fxs gateways (eg 1 port each) Gateway 192.168.10.200 Port 1 : 101(a)192.168.10.200 Gateway 192.168.10.210 Port 1 : 102(a)192.168.10.200 I need a "hotline" feature if someone call to the por 2 in the FXO automatically calls port 1 in gateway 192.168.10.210 And if someone calls to the port 1 in the FXO automatically calls to 192.168.10.200 And also Viceversa If I pickup the phone automatically the gateway goes directly to the port 1 in FXO and that only port not port 2 BTW, please incluye where to put this block into the ser.cfg file Regards HA

20 years, 9 months

[Serusers] using voicemail

by Andrea Bondavalli

Hi all, I am configuring SER in order to use the SEMS's voicemail when one of my subscribed users is not avaiable or when all the INVITEs to their contacts fail (fork). I'am using the following configuration: route { .... if (isflagset(4)) { /*voicemail enabled*/ t_on_failure("1"); } if (!t_relay()) { sl_reply_error(); break; } } failure_route[1] { t_reply("100","Trying -- going to voicemail"); if (method=="INVITE" || method=="REFER") { log("**************** vm start - begin ******************\n"); log("**************** voicemail ******************\n"); if(!vm("/tmp/am_fifo","voicemail")){ log("could not contact the answer machine\n"); t_reply("500","could not contact the answer machine"); }; log("**************** vm start - end ******************\n"); } else if (method=="BYE") { log("**************** vm end - begin ******************\n"); log("**************** voicemail ******************\n"); if(!vm("/tmp/am_fifo","bye")){ log("could not contact the answer machine\n"); t_reply("500","could not contact the answer machine"); }; log("**************** vm end - end ******************\n"); }; } ... This works fine when the system calls a user's contact whose username part matches the subscribed user name. Unfortunately, if the system tries to reach such a contact at a phone number (using a gateway) the result is that SEMS reports: "Error: 404 voicemail: no email address for user 034823213213." Can you help me ? Best regards, Andrea

20 years, 9 months

[Serusers] SER and Vovida B2BUA

by Curro

Hello I want to test a scenario with SER and Vovida B2BUA, but I'm having some problems. If someone has tested this before, I would like to ask you the config files to help me. I'm having problems when Vovida b2bua sends second INVITE to SER and SER doesn't find UA2 (which is correctly registered) (step 3). UA2 ^ | | 4 1 2 UA1 ----> SER ------> B2BUA <----- 3 Thanks for your help Curro

20 years, 9 months

[Serusers] presence xml format and SER

by Curro

Hello all I have a question about presence xml document in SER. I would like to know whether this xml is based on any RFC or draft. I've been reading Presence Information Data Format <draft-ietf-impp-cpim-pidf-08.txt> and I have found nothing about <atom> element. Should UA support this element? Could you give some information? Thank you very much Curro

20 years, 9 months

[Serusers] ERROR 1017

by Axel

Hi, I am getting the following error: ERROR 1017 at line 1: Can't find file: './ser/subscriber.frm' (errno: 13) when I run: serctl add axel 123 axel(a)avenue500.com It was first complaining about /etc/my.cnf at line: 1, and I changed that file to: ------ start file ----- [mysqld] socket=/var/lib/mysql/mysql.sock ------ end file ----- and now I am getting the above error. Any clues what the error means and what I should do? Best regards, Axel

20 years, 9 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2004