sr-users February 2005

sr-users@lists.kamailio.org

215 participants
467 discussions

by Walter Willis

serusers(a)lists.iptel.org the b2bua http://www.vovida.org/applications/downloads/b2bua/ the source code is compatible with SER sources? or is en prototipe?

19 years, 9 months

[Serusers] Asterisk & SER

by Ronald Wiplinger

I am new to SER! I have installed Asterisk successfully and got a hint, if I get more users I should also install SER. I have not found out what is the advantage for that and what I have to do exactly for that! Is there a (good) document out to read about SER more (instead of bothering you guys)? bye Ronald

19 years, 9 months

[Serusers] problem to up service

by ivan falcon

Sir, I a new user for sip server, I've install the sip server but I start service I've a error for load database module I need help for this problem!. regards, Ivan

19 years, 9 months

[Serusers] On-Reply Processing

by José Luis Peñalver Paret

Hello, I would like to know if it is possible to process positive replies. As far as I know, only negative responses can be dealt with, with failure_route. I don't want to modify the response, but I must be able to read it to extract a certain header value and insert it into a database. (In particular I am implementing a P-CSCF and I need the Service-Route header of the 200 response) I hope you can help me. Thank you.

19 years, 9 months

[Serusers] Radius authentication problem

by M.V. Jaga Mohan

HI All I am trying to configure SER with Freeradius. I have downloaded SER-0.8.14 source and compiled with radius_auth, Freeradius 0.9.1 and radiusclient library 0.4.2. Radius server is working fine. when i am trying to run SER i am getting the following error : 0(7517) DEBUG: init_mod: auth_radius 0(7517) auth_radius - Initializing 0(7517) auth_radius: Error opening configuration file 0(7517) init_mod(): Error while initializing module auth_radius ERROR: error while initializing modules Just see the configuration file : # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) #Uncomment these lines to enter debugging mode debug=9 fork=no log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") #modparam("auth_radius", "service_type", 15); # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) # if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!radius_www_authorize("192.168.5.1")) { www_challenge("192.168.5.1","0"); break; }; save("location"); break; # }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } Please tell me what could be the problem. Thanks in advance Jagan =====

19 years, 9 months

[Serusers] Some cisco phone question

by Alex

Hi all. I have some problem that mine cisco phone 7960 not sending "REGISTER" requests. If any one had that problem. Or any idea for solution. Thanks alot. --------------------------------- Do you Yahoo!? Yahoo! Search presents - Jib Jab's 'Second Term'

19 years, 9 months

[Serusers] avp_radius

by mohammad

Hi ALL; Is there anybody who knows more about avp_radius module? Dose it mean "Radius based call routing" Appreciate any help and info. Regards Mohamad

19 years, 9 months

RE: [Serusers] problem running modparam ("userloc", "db_mode", 2)

by Klaus Feichtinger

.try changing from sql to mysql in the db_url. In my case that helped very much (e.g. modparam("usrloc", "db_url", "mysql://ser:heslo@10.2.1.1/ser") klaus >I'm starting to run mysql on another server and then I was not able to run ser with: > >modparam ("userloc", "db_mode", 2) >or >modparam ("userloc", "db_mode", 1) > >In ser.cfg I have inserted: >modparam("usrloc", "db_url", "sql://ser:heslo@10.2.1.1/ser") >and >modparam("auth_db", "db_url", "sql://ser:heslo@10.2.1.1/ser") > > >what id the problem? >thanks

19 years, 9 months

[Serusers] i need some help

by Welesley Sibelson Dias

i have one system with SER --->B2BUA ---SER ---- PSTN but b2bua have one problem is from vovida and accept any connection from any host one solution i have search is put b2bua into private network and redirect to ser, but i have receive 500 interserver error somebody have some know using b2bua to more security thks best regards

19 years, 9 months

[Serusers] problem running modparam ("userloc", "db_mode", 2)

by Rosario Pingaro

I'm starting to run mysql on another server and then I was not able to run ser with: modparam ("userloc", "db_mode", 2) or modparam ("userloc", "db_mode", 1) In ser.cfg I have inserted: modparam("usrloc", "db_url", "sql://ser:heslo@10.2.1.1/ser") and modparam("auth_db", "db_url", "sql://ser:heslo@10.2.1.1/ser") what id the problem? thanks

19 years, 9 months

← Newer
1
...
28
29
30
31
32
33
34
...
47
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users February 2005