sr-users February 2005

sr-users@lists.kamailio.org

215 participants
467 discussions

[Serusers] forwarding to pstn
by harry gaillac 25 Feb '05

25 Feb '05

Hi all, I set up ser + asterisk. Asterisk is registred as gateway(a)home.net and listen port 5070 (same box). two hard phones are registred as bob(a)home.net and alice(a)home.net . from alice or bob i want to call 01013 to PSTN without success. ser lookup location and aliases and so reply not found thought i set forward ? Thanks for your help Harry # ----------- global configuration parameters ------------------------ debug=5 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode #debug=7 #fork=no #log_stderror=yes */ check_via=no # (cmd. line: -v) dns= no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=192.168.0.1 alias="home.net" #alias="192.168.0.1" port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/group.so" loadmodule "/usr/lib/ser/modules/uri.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("15")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("home.net", "subscriber")) { www_challenge("home.net", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB or ALIASES if (!lookup("location") | !lookup("aliases")) { sl_send_reply("404", "Not Found"); break; }; } else { t_relay(); }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; # forward to PSTN if (uri=~"sip:01013@home.net") { if (method=="INVITE") { route(1); break; }; }; } route[1] { # forward to PSTN if (uri=~"sip:01013@home.net") { if (method=="INVITE") { forward(192.168.0.1, 5070); break; }; }; } Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/ Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

3 2

[Serusers] include_route
by Iqbal 25 Feb '05

25 Feb '05

Hi In my ser.cfg I seem to have lots of segments which are repeated in each route, is there anyway...or would/can it be included in a later realease a method of including these i.e include_segment[1] { Check if authorised } route [1] { include_segment(1) rest of stuff } Iqbal

2 1

[Serusers] find_export: <append_hf> not found - SOLVED IT
by Paulo Vicentini 25 Feb '05

25 Feb '05

Hi Lucas, Would mind sending your ser.cfg file, i am facing the same problems with NAT traversal I have already read > <http://www.informatik.uni-bremen.de/~prelle/terena/cookbook/Co> okbook_D2/ but it still does not working This is my ser.cfg file: # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/nathelper.so" # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # We will you flag 6 to mark NATed contacts modparam("registrar", "nat_flag", 6) # Enable NAT pinging modparam("nathelper", "natping_interval", 60) # Ping only contacts that are known to be # behind NAT modparam("nathelper", "ping_nated_only", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # special handling for NATed clients; first, nat test is # executed: it looks for via!=received and RFC1918 addresses # in Contact (may fail if line-folding used); also, # the received test should, if complete, should check all # vias for presence of received if (nat_uac_test("3")) { # allow RR-ed requests, as these may indicate that # a NAT-enabled proxy takes care of it; unless it is # a REGISTER if (method == "REGISTER" || ! search("^Record-Route:")) { log("LOG: Someone trying to register from private IP, rewriting\n"); # This will work only for user agents that support symmetric # communication. We tested quite many of them and majority is # smart smart enough to be symmetric. In some phones, like # it takes a configuration option. With Cisco 7960, it is # called NAT_Enable=Yes, with kphone it is called # "symmetric media" and "symmetric signaling". (The latter # not part of public released yet.) fix_nated_contact(); # Rewrite contact with source IP of signalling if (method == "INVITE") { fix_nated_sdp("1"); # Add direction=active to SDP }; force_rport(); # Add rport parameter to topmost Via setflag(6); # Mark as NATed }; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("200.151.192.13", "subscriber")) { www_challenge("200.151.192.13", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } # # Forcing media relay if necessary # route[1] { if (uri=~"[@:](192\.168\.|10\.|172\.16)" && !search("^Route:")){ sl_send_reply("479", "We don't forward to private IP addresses"); break; }; if (isflagset(6)) { force_rtp_proxy(); t_on_reply("1"); append_hf("P-Behind-NAT: Yes\r\n"); }; if (!t_relay()) { sl_reply_error(); break; }; } onreply_route[1] { if (status =~ "(183)|2[0-9][0-9]") { fix_nated_contact(); force_rtp_proxy(); }; } Thanks Paulo

1 0

[Serusers] SER Authentication Configuration FAILLER
by Brahim 25 Feb '05

25 Feb '05

I am using ser-0.9.0 and freeradius-0.9.1, i install free radius succefull but when i try to recompile ser the auth_radius.so module doest not create and i get the following errors. /***************************************************************************************************************************************************/ make[1]: Entering directory `/usr/ser-0.9.0/modules/group_radius' gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall -minline-all-stringops -malign-double -falign-loops -mcpu=i686 -DNAME='"ser"' -DVERSION='"0.9.0"' -DARCH='"i386"' -DOS='"linux"' -DCOMPILER='"gcc 3.3"' -D__CPU_i386 -D__OS_linux -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DDBG_QM_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -I/usr/local/include -c group.c -o group.o In file included from ../../parser/parse_uri.h:38, from group.c:42: ../../parser/msg_parser.h: In function `get_body': ../../parser/msg_parser.h:314: warning: comparison between signed and unsigned ../../parser/msg_parser.h:316: warning: comparison between signed and unsigned group.c: In function `radius_is_user_in': group.c:194: warning: passing arg 2 of `rc_avpair_add' makes integer from pointer without a cast group.c:194: warning: passing arg 3 of `rc_avpair_add' makes pointer from integer without a cast group.c:194: warning: passing arg 4 of `rc_avpair_add' makes integer from pointer without a cast group.c:194: error: too many arguments to function `rc_avpair_add' group.c:203: warning: passing arg 2 of `rc_avpair_add' makes integer from pointer without a cast group.c:203: warning: passing arg 3 of `rc_avpair_add' makes pointer from integer without a cast group.c:203: warning: passing arg 4 of `rc_avpair_add' makes integer from pointer without a cast group.c:203: error: too many arguments to function `rc_avpair_add' group.c:209: warning: passing arg 2 of `rc_avpair_add' makes integer from pointer without a cast group.c:209: warning: passing arg 3 of `rc_avpair_add' makes pointer from integer without a cast group.c:209: warning: passing arg 4 of `rc_avpair_add' makes integer from pointer without a cast group.c:209: error: too many arguments to function `rc_avpair_add' group.c:215: warning: passing arg 1 of `rc_auth' makes integer from pointer without a cast group.c:215: warning: passing arg 3 of `rc_auth' from incompatible pointer type group.c:215: warning: passing arg 4 of `rc_auth' from incompatible pointer type group.c:215: error: too many arguments to function `rc_auth' make[1]: *** [group.o] Error 1 /***************************************************************************************************************************************************/ Any Help.

2 1

[Serusers] SER+Asterisk on high loads
by Alexey N. Kovyrin ＠ Home 25 Feb '05

25 Feb '05

Hello, All! There is some questions about subj. With what loads SER+Asterisk can be used? I need to know, what number of simultaneous registrations and simultaneous calls can handle this conplex? It'll be very good, if someone can say his success story about SER+Asterisk. Now, we're planning 1000-10000 clients... can SER handle this number of registrations? And can SER+Asterisk (assume that almost all users are using NAT) can handle calls of 0.1-1% of above clients base? Great thanks to all for answers. -- /Scoundrel

4 7

[Serusers] ;lr=on> versus ;lr> -- which is RFC3261 compliant?
by Java Rockx 25 Feb '05

25 Feb '05

Hi all. We have a partner with a Sonus box that we use for PSTN termination. Their Sonus box produces suspect Record-Route headers. Can anyone tell me if it is compliant with RFC3261? A sample header that I receive looks like this: Record-Route: <sip:xxx.xxx.xxx.xxx:5060;lr> And I discovered that Asterisk-1.0.2 seems to not properly handle these messages so it does strict routing rather than loose routing. Greg greger(a)teigre.com was kind enough to point me to RFC3261 Section 19.1.1 which seems to indicate that ;lr> should be ;lr=on> for complance. Is this correct? Regards, Paul

3 3

[Serusers] SER, rtpproxy and SIPclient
by Mohammad Khan 25 Feb '05

25 Feb '05

My SER is running behind NAT with rtpproxy. I was able to send and receive message via Windows Messenger. Both clients were outside my network and they were also behind NAT. Problem is, I can't communicate with a client (outside my network) from my internal network. Here is my iptables rules -A PREROUTING -p tcp -d 66.92.x.y --dport 5060 -j DNAT --to-destination 192.168.71.2 -A PREROUTING -p udp -d 66.92.x.y --dport 5060 -j DNAT --to-destination 192.168.71.2 -A POSTROUTING -s 192.168.71.0/24 -d 192.168.71.2 -p tcp --dport 5060 -j SNAT --to 192.168.71.1 -A POSTROUTING -s 192.168.71.0/24 -d 192.168.71.2 -p udp --dport 5060 -j SNAT --to 192.168.71.1 -A POSTROUTING -s 192.168.71.0/24 -o eth0 -j SNAT --to-source 66.92.x.y my rtpproxy is running without any argument. Would anybody please give me hint, how to overcome this problem. Thanks, Mohammad

1 0

[Serusers] help a newbie !!!
by Atif Rasheed 25 Feb '05

25 Feb '05

hello there, I am new to SER, just want to configure it with two NIC interfaces (for global network. calls from external network (global network) should be routed to a sip-endpoint in internal network. and I need rtp proxied with it. I have tried but rtpproxy is crashing or SER is crashing. can some one please tell me the stable version of SER or rtpproxy to use and can some one please send me his configuration file working in a similar schema. *sip-endpoint in internal network is not registered on the SER. thanks Atif

1 0

RE: [Serusers] Turn 3xx into new Invite
by Paul Belanger 25 Feb '05

25 Feb '05

Just got a reply from a fellow SER user to add append_branch() fuction, but I still cannot see the INVITE from my SER. onreply_route[1] { xlog("L_NOTICE", "Reply status %rs: Reason %rr\n"); if (t_check_status("302")) { xlog("L_NOTICE", "We got a 302!!!!!\n"); ## Used to send INVITE message? ## append_branch(); }; } -----Original Message----- From: Martin Koenig [mailto:martin.koenig@toplink-plannet.de] Sent: Tuesday, February 22, 2005 11:33 AM To: Paul Belanger Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] Turn 3xx into new Invite Hello, see: http://lists.iptel.org/pipermail/serusers/2004-December/014107.html looks like Juha Heinänen has a patch for this available somewhere, maybe he would like to share this? Regards, Martin Paul Belanger schrieb: >Ya, I have looked at that one, but I can see how it sends out the >INVITE. > >-----Original Message----- >From: Martin Koenig [mailto:martin.koenig@toplink-plannet.de] >Sent: Tuesday, February 22, 2005 11:09 AM >To: Paul Belanger >Cc: serusers(a)lists.iptel.org >Subject: Re: [Serusers] Turn 3xx into new Invite > > >Hello, > >there is this one so far: > >http://lists.iptel.org/pipermail/serusers/2004-August/010977.html > >Didn't really help... > >Regards, >Martin > >Paul Belanger schrieb: > > > >>Rumor has it yes, but I have not been successful. I posted a question >>last week, and was told to search the archives. I did, but not much >>came up! >> >>http://www.google.ca/search?hl=en&q=302+site%3Amail.iptel.org&btnG=Goo >>g >>le+Search&meta= >> >>I think I'm on the right track, but don't have time today to play with >>it. Here is what I got so far: >> >># >># $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ >># >># simple quick-start config script >># >> >># ----------- global configuration parameters ------------------------ >> >>#debug=3 # debug level (cmd line: -dddddddddd) >>#fork=yes >>#log_stderror=no # (cmd line: -E) >> >>debug=3 >>fork=no >>log_stderror=yes >> >>check_via=no # (cmd. line: -v) >>dns=no # (cmd. line: -r) >>rev_dns=no # (cmd. line: -R) >>#port=5060 >>#children=4 >>fifo="/tmp/ser_fifo" >> >># ------------------ module loading ---------------------------------- >> >># Uncomment this if you want to use SQL database >>#loadmodule "/usr/local/lib/ser/modules/mysql.so" >> >>loadmodule "/usr/local/lib/ser/modules/sl.so" >>loadmodule "/usr/local/lib/ser/modules/tm.so" >>loadmodule "/usr/local/lib/ser/modules/rr.so" >>loadmodule "/usr/local/lib/ser/modules/maxfwd.so" >>loadmodule "/usr/local/lib/ser/modules/usrloc.so" >>loadmodule "/usr/local/lib/ser/modules/registrar.so" >>loadmodule "/usr/local/lib/ser/modules/xlog.so" >> >># Uncomment this if you want digest authentication >># mysql.so must be loaded ! >>#loadmodule "/usr/local/lib/ser/modules/auth.so" >>#loadmodule "/usr/local/lib/ser/modules/auth_db.so" >> >># ----------------- setting module-specific parameters --------------- >> >># -- usrloc params -- >> >>modparam("usrloc", "db_mode", 0) >> >># Uncomment this if you want to use SQL database >># for persistent storage and comment the previous line >>#modparam("usrloc", "db_mode", 2) >> >># -- auth params -- >># Uncomment if you are using auth module >># >>#modparam("auth_db", "calculate_ha1", yes) >># >># If you set "calculate_ha1" parameter to yes (which true in this >>config), # uncomment also the following parameter) # >>#modparam("auth_db", "password_column", "password") >> >># -- rr params -- >># add value to ;lr param to make some broken UAs happy modparam("rr", >>"enable_full_lr", 1) >> >>modparam("tm", "fr_inv_timer", 15 ) >>modparam("tm", "fr_timer", 10 ) >> >># ------------------------- request routing logic ------------------- >> >># main routing logic >> >>route{ >> >> # initial sanity checks -- messages with >> # max_forwards==0, or excessively long requests >> if (!mf_process_maxfwd_header("10")) { >> sl_send_reply("483","Too Many Hops"); >> break; >> }; >> if ( msg:len > max_len ) { >> sl_send_reply("513", "Message too big"); >> break; >> }; >> >> # we record-route all messages -- to make sure that >> # subsequent messages will go through our proxy; that's >> # particularly good if upstream and downstream entities >> # use different transport protocol >> record_route(); >> # loose-route processing >> if (loose_route()) { >> t_relay(); >> break; >> }; >> >> # if the request is for other domain use UsrLoc >> # (in case, it does not work, use the following command >> # with proper names and addresses in it) >> if (uri==myself) { >> >> if (method=="REGISTER") { >> save("location"); >> break; >> }; >> }; >> >> >> if (method=="INVITE") { >> rewritehostport("216.143.130.70:5060"); >> t_on_reply("1"); >> t_on_failure("1"); >> t_relay(); >> break; >> } >> >>} >> >>onreply_route[1] { >> xlog("L_NOTICE", "Reply status %rs: Reason %rr\n"); >> if (t_check_status("302")) { >> xlog("L_NOTICE", "We got a 302!!!!!\n"); >> ## ADD CODE TO SEND OUT INVITE!! ### >> }; >>} >> >>failure_route[1] { >> xlog("L_NOTICE", "Failure status %rs: Reason %rr\n"); } >> >>Let me know if you find any information. >> >>Paul >> >>-----Original Message----- >>From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] >>On >>Behalf Of Martin Koenig >>Sent: Tuesday, February 22, 2005 11:00 AM >>To: serusers(a)lists.iptel.org >>Subject: [Serusers] Turn 3xx into new Invite >> >> >>Hello, >> >>is it possible to take 3xx-responses in a reply_route and turn them >>into >>a new INVITE on Ser using append_branch or simliar? >> >>Regards, >>Martin >> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers >> >> >> >> >> > > >

5 5

[Serusers] aliases with trigger problem
by braincrew.com 25 Feb '05

25 Feb '05

Hi guys, I tried to make aliases w/ trigger but something goes wrong. Trigger is made on insert in the database. If user logins with username 123 alias 0123 is created. But if I call 0123 I get "404 Not found" any idea? P.S. in ser.cfg I have : if (uri==myself) { if (method=="REGISTER") { if (!www_authorize("193.193.162.71", "subscriber")) { www_challenge("193.193.162.71", "0"); break; }; save("location"); lookup("aliases"); Thanks!

2 3

← Newer
1
...
4
5
6
7
8
9
10
...
47
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users February 2005