Does serweb accounting have the ability to show received calls? If so
how do I implement this? (note: I can see outgoing calls fine in
accounting tab)
Thanks!
- Daryl
Hi folks,
New changes in ACC module - the global flag "failed_transactions"
replaced with the "failed_transaction_flag" per transaction flag.
The idea is to allow you to mark which transaction should be accounted
in case of failure (response>=300). The global flag was not enough.
Imagine the following case: O want to account only positive INVITES
(established calls) - I really don't want to oversize my logs with
failed INVITEs -, but in the same time I want to account all BYEs
(succeeded or failed).
regards,
bogdan
PS: CVS head, pserver CVS and docs (cvs and web) already updated
Can any one explain me what does means
# INSERT YOUR PSTN GATEWAY IP ADDRESS
in the following routes.
If i am right, is the IP for carier?
route[4] {
#
-----------------------------------------------------------------
# PSTN Handler
#
-----------------------------------------------------------------
rewritehost("192.0.2.245"); # INSERT YOUR PSTN
GATEWAY IP ADDRESS
avp_write("i:45", "inv_timeout");
route(5);
route(1);
}
Thank YOu
Yours,
Abdul Lateef
Computer Programmer
HATIF COM
Mob: +974 - 5405022
Tel: +974 - 4883068
ICQ: 276994704
YM!: abdul_zu
Fax: +974 - 4883063
Doha Qatar
http://www.hatif.com
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Hi Wilson,
please (CC) the list in your replies.
Which is the domain you are useing for ser? For admin user?
The 'ipaddress' appear strange for me. Check your database. Table
subscriber and column domain.
regards Karel
li wei napsal(a):
> Hi Karel:
>
> Glad to get your warm help. I have solved my problem
> now. It is caused by the serweb didn't have the
> privilege to write files into the /tmp/serweb/ folder.
>
> But I face a new problem now. My ser database use the
> default username and password (ser:heslo). When I
> enter the default username and password for serweb
> admin (admin@ipaddress,heslo). It returns me the
> following error:
>
> DB Error: connect failed
> Bad username or password
>
> It's pretty strange.
>
> Can you do me a favor again?
>
> Thanks a lot.
>
> Wilson
>
>
>
>
>
> --- Karel Kozlik <karel(a)iptel.org> wrote:
>
>
>>Hi,
>>and what about user interface? Work it correctly?
>>
>>What about php log? Are there any messages? Have you
>>enabled error
>>reporting in php? I recommend to set these in your
>>php.ini:
>>
>>error_reporting = E_ALL
>>display_errors = On
>>
>>
>>Karel
>>
>>
>>
>>li wei napsal(a):
>>
>>>Hi there:
>>>
>>>Have install the ser and serweb 0.93 official
>>
>>version.
>>
>>>When I try to open the admin page, It just returns
>>
>>me
>>
>>>the following message.
>>>
>>>IPaddress admin interface
>>>
>>>And I try to see the return html source code, it
>>
>>stops
>>
>>>at tag <div>. The detail as the follow:
>>>
>>><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
>>>Strict//EN"
>>>
>>
>>"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
>>
>>><html>
>>><head>
>>><title>SIP Express Router - web interface</title>
>>> <meta http-equiv="Content-Type"
>>
>>content="text/html;
>>
>>>charset=utf-8">
>>> <meta name="Author" content="Karel Kozlik <karel
>>
>>at
>>
>>>iptel dot org>">
>>> <meta http-equiv="PRAGMA" content="no-cache">
>>> <meta http-equiv="Cache-control"
>>
>>content="no-cache">
>>
>>> <meta http-equiv="Expires" content="Wed, 29 Jun
>>
>>2005
>>
>>>04:18:07 GMT">
>>>
>>> <LINK REL="StyleSheet"
>>>HREF="/serweb/html/domains/_default/styles.css"
>>>TYPE="text/css">
>>>
>>></head>
>>>
>>><script language="JavaScript"
>>>
>>
> src="/serweb/html/js/login_completion.js.php"></script><body><h1>
>
>>>IPaddress admin interface</h1><hr>
>>><div class="swMain">
>>>
>>>Can anybody help me?
>>>
>>>Thanks a lot.
>>>
>>>Wilson
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>____________________________________________________
>>
>>
>>>Do you Yahoo!?
>>>Try Yahoo! Photomail Beta: Send up to 300 photos
>>
>>in one email!
>>
>>>http://au.photomail.mail.yahoo.com
>>>
>>>_______________________________________________
>>>Serusers mailing list
>>>serusers(a)lists.iptel.org
>>>http://lists.iptel.org/mailman/listinfo/serusers
>>
>
>
>
>
>
>
>
> ____________________________________________________
> Do you Yahoo!?
> Try Yahoo! Photomail Beta: Send up to 300 photos in one email!
> http://au.photomail.mail.yahoo.com
I've configured ser like it's explained in the getting started document...ser.cfg with sql authentication...
1) i'm not able to insert new ser user, help me to do it?
2) i connect a user, that is present in ser data base, with messenger...
if i look in the ser administration the user is not online...why?
thanks
____________________________________________________________
6X velocizzare la tua navigazione a 56k? 6X Web Accelerator di Libero!
Scaricalo su INTERNET GRATIS 6X http://www.libero.it
Hello dear Iqbal,
Thanks for your great reply.
I am really sorry to posting to much questions in this
thread.
I have one another issue, i did test the IP Phone with
SER on the same local network and it is working fine.
But when i changed the SER server with public IP
address while chainging
listen=212.77.213.69
port=5060
and still the IP Phone is in local network, the IP
phone is not able to register using SER publick IP.
here is a small log i capture it from message file.
Jun 29 15:44:45 localhost sshd(pam_unix)[3040]:
session opened for user root by (uid=0)
Jun 29 15:44:50 localhost ser: WARNING:
fix_socket_list: could not rev. resolve 212.77.213.69
Jun 29 15:44:50 localhost ser: WARNING:
fix_socket_list: could not rev. resolve 212.77.213.69
Jun 29 15:44:50 localhost ser[3087]: INFO: udp_init:
SO_RCVBUF is initially 65535
Jun 29 15:44:50 localhost ser[3087]: INFO: udp_init:
SO_RCVBUF is finally 262142
Jun 29 15:44:50 localhost ser[3087]: ERROR: tcp_init:
bind(6, 0x8114d24, 16) on 212.77.213.69: Address
already in use
Jun 29 15:44:50 localhost ser[3087]: INFO: signal 15
received
Jun 29 15:44:59 localhost sshd(pam_unix)[3040]:
session closed for user root
Let me know what more configurations need?
Thank You
Yours,
Abdul Lateef
Computer Programmer
HATIF COM
Mob: +974 - 5405022
Tel: +974 - 4883068
ICQ: 276994704
YM!: abdul_zu
Fax: +974 - 4883063
Doha Qatar
http://www.hatif.com
____________________________________________________
Yahoo! Sports
Rekindle the Rivalries. Sign up for Fantasy Football
http://football.fantasysports.yahoo.com
Hi Sebastian!
Please Cc: to the list.
What is the error message? Does it work with the default log_fmt parameter?
Posting your ser.cfg might help as well.
klaus
Sebastian Kühner wrote:
> I have the error: I had to put following line
>
> modparam("acc", "log_fmt", "cftmsup")
>
> the "p" at the end didn't exist before...
>
> ----- Original Message -----
> From: "Klaus Darilion" <klaus.mailinglists(a)pernau.at>
> To: "Sebastian Kühner" <skuehner(a)veraza.com>
> Cc: <serusers(a)lists.iptel.org>
> Sent: Tuesday, June 28, 2005 5:05 PM
> Subject: Re: [Serusers] serweb and missed calls
>
>
>
>>Do you use log_missed_flag ?
>>
>>http://www.iptel.org/ser/doc/seruser/seruser.html#MISSEDCALLS
>>
>>regards,
>>klaus
>>
>>Sebastian Kühner wrote:
>>
>>>Hello,
>>>
>>>Finally I have my serweb running (it had problems with apache2 and
>
> php5...
>
>>>many problems!).
>>>
>>>Now I have the problem that serweb doesn't show me the missed calls. I
>>>looked at the mysql-database and noticed that ser doesn't save the
>
> domain
>
>>>and username - information in the table "missed_calls"...
>>>
>>>How can I make ser to save theese informations, too?
>>>
>>>Thanks!
>>>
>>>Sebastian
>>>
>>>
>>>_______________________________________________
>>>Serusers mailing list
>>>serusers(a)lists.iptel.org
>>>http://lists.iptel.org/mailman/listinfo/serusers
>>>
>>>
>>
>>
>
>
>
To all the Cisco gurus,
I'm having troubles with configuration a Cisco 3600 to work with SER. If my
network (SER+Cisco) is running under port 5060, I can land calls as well as
have calls passed from PSTN to SIP. (Not perfectly, some refining is needed)
But my headaches starts when I switch the default 5060 port to some other port
(let's say 5080) due to some network restrictions, thus I must change from port
5060 to something else.
The problem I'm having is the following....
In Cisco 3600, I've setup session target to server-ip+5080.... but when SER
receives a call coming from Cisco, SIP messages (such as trying) will be sent
back to cisco via port 5060. I'm guessing this problem is caused by transport
listen port is default to 5060. If so, how do I change this to other ports???
Better yet, does anyone know how I can configure a cisco to run on different
ports under SIP??? I may be wrong with the transport and such, thus any inputs
or suggestions is welcome (and desperately needed)!! :>
Here?s a capture from my ngrep?.
U cisco-ip:54215 -> SER-ip:5080
INVITE sip:6119203@SER-ip;user=phone;phone-context=local SIP/2.0..Via:
SIP/2.0/UDP cisco-ip:5060..From: "6113640" <sip:6113640@cisco-ip>..To:
<sip:6119203@SER-ip;user=phone;phone-context=local>.......
U SER-ip:5080 -> cisco-ip:5060
SIP/2.0 100 trying -- your call is important to us..Via: SIP/2.0/UDP
cisco-ip:5060..From: "6113640" <sip:6113640@cisco-ip>..To:
<sip:6119203@SER-ip;user=phone;phone-context=local>........
U SER-ip:5080 -> cisco-ip:5080
INVITE sip:6119203@cisco-ip:5080;user=phone;phone-context=local
SIP/2.0..Record-Route: <sip:6119203@SER-ip:5080;nat=yes;lr=on>..Via:
SIP/2.0/UDP SER-ip:5080;branch=z9hG4bKea02.173ff176.0..Via: SIP/2.0/UDP
cisco-ip:5060..From: "6113640" <sip:6113640@cisco-ip>..To:
<sip:6119203@SER-ip;user=phone;phone-context=local>..............
Best Regards,
Samuel Yeung
Hi folks,
I just committed on CVS head support for call-leg accounting. The
documentation was already updated both on CVS and site
(http://www.openser.org/docs/modules/0.10.x/acc.html).
this feature is quite useful when a call gets to have several legs ( for
example, due call forwarding services). Having detailed accounting of
the call leg will allow easy and proper CDR generation and billing.
the feature is available for syslog, DB and RADIUS accounting (DIAMETER
still missing).
Any suggestions/comments regarding the way it works or it's implemented
are welcomed. Also problem reports :)
regards,
Bogdan
