Hello,
What are you using to authenticate SER on public PSTN services ? I was
using UAC module, but it's very unstable.
Any help will be appreciated.
Thank you.
--
Thomas Storino Britis
TCNet Inf e Telecom LTDA
Hello,
Does xcap-0.2.tar.gz is ready to start i mean no conf
files are missing ?
--- Jamey Hicks <jamey.hicks(a)hp.com> a écrit :
> harry gaillac wrote:
>
> >Thanks for help,
> >
> >I don't understand something :
> >
> >
> >
> >>>>>>>def name of xcap server
> >>>>>>>modparam("pa", "db_url",
> >>>>>>>"mysql://ser:tespaserv@localhost/ser") #
> >>>>>>>
> >>>>>>>
> >>def
> >>
> >>
> >
> >If ser act as a xcap server why
> >http://pals.internet2.edu/downloads/ provide
> >xcap-0.2.tar.gz (Does config files are missing!?)
> >
> >
> >
> SER handles SIP messages, while the xcap server
> handles HTTP PUT/GET.
> The xcap server shares the mysql tables for
> subscriber authentication,
> but just uses the filesystem for storing pres-rules
> and resource-lits.
Why this if xcapcgi.py query DB ?
>>def name of xcap server
>modparam("pa", "db_url",
>mysql://ser:tespaserv@localhost/ser")
> >How can we setup pa module + ser + xcap server to
> >provide and subscribe to lists ?
> >
> >Does both xcap server and pa module use pa table ?
> >
> > xcap server + web interface (xcapcgi.py)
> > |
> > ?
> > |
> >ua1----------ser--------ua2
> > |
> > |
> > DB +pa table/ pa module
> >
> >
> >
> >
> The picture is more like this:
>
> ua1--------------|--------------ua2
> | |
> http |
> | |
> xcap ser/pa
> mysql
>
>
> >For example xcap server handle a list with URI
> >sip:friends@mydomain
> >ua1 and ua2 subscribe to this list.
> >How ser/pa module/pa table and xcap server make
> this
> >possible ?
> >
> >
> >
> resource lists are currently only supported on the
> client side, e.g.,
> ua1 can fetch and manage a resource-list via xcap.
> The xml for that
> list will be stored on the filesystem.
you mean sip user agent subscibe for a ressource list
like sip:friends@domain
Regards
Harry
> -Jamey
>
>
___________________________________________________________________________
Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger
Téléchargez cette version sur http://fr.messenger.yahoo.com
Hi
I have an interesting problem, with one of my setups, call transfers are
fine ip to ip, but if the call comes in via PSTn to a ip phone, which
then wants to transfer to another ip phone, I get 404 Not found.
On transfer there is a INVITE sent to the originator, and then followed
by a REFER, on the first INVITE which is sent to the PSTN is says user
not found, has anyone got a setup like this.
Iqbal
Hi,
I m using a radius to autehitcate my users. The SER is compiled with
radius support and location of radiusclients.conf has been correctly
modparam'ed , but Xten is showing login timed out.. i.e, it is unable to
login the user. Where might be the error? How can I see the outgoing radius
request packets which my SER is sending besides SER debugging console. It
doesn't show up in the log files.
Regards,
Ashutosh Kumar
Chetu, Inc.
Ph : 1(305) 402 6724 - Witin US
Ph : 91 120 5323340 - Outside US
Fax:1 (305) 832 5987
For more information, please visit http://www.chetu.com
Hi all,
I need to work with an engineer who has the following preresquisites:
- Knowledge on VoIP is a must.
- Understands SER and Asterisk (for integration).
- Help to design the network for redundancy and failover.
- Help develop or recommend billing and accounting software.
- Speaks fluent english.
- Willing to work overseas (In this case,Singapore)
- State your expect salary too (In Singapore dollars)
Please email me back at zaihan(a)unrealasia.net with your resume.
Regards,
Zaihan
Hello everyone,
I've found and issue with save function and I'd like to know what I'm doing
wrong.
I configured, it correctly pass the porxy authentication, and then a new
record is added to the location database using the save function after
receiveing a register request.
The problem is when the same terminal changes the IP address (is using
DHCP). The save function adds a new record to the location database, instead
of updating the existing record changing the contact field.
I looked at mysql log, and the update command is including the location
information in the where statement, thats is why mysql is adding a new
record instead of updating the existing one.
Is that a problem with the save function? Should I configure something in
order to make it look for just the username and domain without including the
contact info?
Thank you very much in advance.
Best regards
Hernán
I get the following error when running serweb:
Fatal error: Call to undefined function: mysql_pconnect() in
/var/www/html/phplib/db_mysql.inc on line 73
Please help!!
DISCLAIMER: The information in this message is confidential and is legally
privileged. It is intended solely for the addressee. Access to this message by
anyone else is unauthorized.If receiving in error please accept our apologies
and notify the sender immediately. You must also delete the original
message from your machine. If you are not the intended recipient, any use,
disclosure, copying, distribution or action taken in reliance of it, is prohibited
and maybe
unlawful.
Iqbal, Jeff:
I dont know too much about Astrisk but I thought Asterisk could manage a set of endpoints by itself. Why do you need to run SER with an Asterisk? Could you not just run Asterisk and use it to manage your network.
Vikrant
Hello,
I've already posted message on this topic, but some questions remain
unanswered.
My concerns are bout the pa module (presence).
* Does it support RFC3857 to allow authorization management of
subscriptions?
* Any ideas if the presence server can be easily distributed on several
machines?
- What kind of database is used (to ensure having up-to-date data on
each server) ?
- How to determine which server sends the status change's notification
to users?
* How can one estimate the required bandwidth (5000 online users, with avg
40 users per contact list, is likely to generate many NOTIFY message)
* Is it possible to performs computation before proceeding (to check account
credit before giving access to a service)
Regards,
Luba Vincent
Hi!
My openser (cvs) enteres the failure route also if the caller cancels
the call, which is IMO not a failure. This this a feature or a bug (or
can this be caused by bad configuration)?
regards
klaus
