sr-users August 2005

sr-users@lists.kamailio.org

220 participants
558 discussions

by Siphiwo Dzingwe

Hi I just installed ser v0.8.14 from the *.tar.gz distribution and when I try to run serctl moni it gives me an error saying: Error opening ser's FIFO /tmp/ser_fifo Make sure you have line fifo=/tmp/ser_fifo in your config in the ser.cfg file the line fifo="/tmp/ser_fifo" is uncommented. what am I doing wrong

19 years, 3 months

[Serusers] Mysql CDR time different

by TCCHAN

Hi All, I have acc module to generate cdr for calls. I noticed that all the calls are timed 4 hour different than what is shown on the real time clock. Can anyone help? Thanks for any help available. Regards, TC Chan

19 years, 3 months

[Serusers] enum lookups and billing

by Iqbal

Hi Is there a easy way of doing zero billing for all datra returned from enum lookup Iqbal

19 years, 3 months

RE: [Serusers] starting and stopping ser

by Marc Khayat

Mr Jan Janak helped me out on this: Use the init.d scripts (usually /etc/rc.d/init.d/ser in RedHat). So u can do: /etc/rc.d/init.d/ser start|stop|restart Marc -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Ashutosh Kumar Sent: Tuesday, August 09, 2005 5:06 PM To: serusers(a)lists.iptel.org Subject: RE: [Serusers] starting and stopping ser Hi, In my case also, using "serctl stop", gave the error ""pid file cannot be found....blah blah". And killing all running ser forked processes one by one is cumbersome. So the method I m using for the time being till I get a nice solutions is use the command "killall /usr/local/sbin/ser" , i.e the killall command is followed by the prog name along with the full path or the prog name only, depending upon where in the filesys you are standing right now. I also found the following commands to be usful when viewing running ser processes -ps -auxmchf | grep ser -pstree -Gpn | grep ser : shows ser heirachy wise, (father and sons) Regards Ashutosh ________________________________________ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Hemant Patel (IP) Sent: Tuesday, August 09, 2005 8:23 PM To: serusers(a)lists.iptel.org Subject: [Serusers] starting and stopping ser Hi List , This is my first install and use of ser so please bear with me. I've installed ser 0.9.3 ( Linux i386 ) binary. Started and stopped ser with the default ser.cfg - fine. Amended ser.cfg to load mysql.so auth and auth_db modules as per standard instructions. Mysql version is 4.0.18. I used 'mysql_sh' script to create default ser database and ser , serro users in mysql with default password. Checked that 'admin' user also setup on ser database with default password. Have set debug level 7 in ser.cfg to follow what goes on. Logged in as normal user and then su as root So here goes.. ser start - this seems to be ok. ser stop - seems to report ser has stopped ser start - connection to 127.0.0.1 already in use message ( ???) So am I starting and stopping ser incorrectly ? What's the best way to start and stop ser - in a development environment ? Any pointers gratefully received. thanks -- Hemant Patel ipwise Ltd http://www.ipwise.com hpatel(a)ipwise.com (+44) 0208 2409433 _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

19 years, 3 months

[Serusers] Is it possible to configure SER to authenticate from a third party db table?

by Gareth Holly

Hi, I'm trying to configure SER to perform proxy authentication using username and password information from a users table in my own database. Is this possible? and if it is could you please point me in the direction of configuration examples? Thanks in advance Send instant messages to your online friends http://au.messenger.yahoo.com

19 years, 3 months

Re: [Users] rport in via header

by Daniel-Constantin Mierla

Hello, On 08/11/05 04:33, ranveer kunal wrote: >hey daniel, > The packet from the ser proxy is statelessly forwarded >by a gateway that is inline with proxy, now i want next hop proxy to >reply on the port of the gateway rather than port of proxy. that is y >i need proxy to send rport. > >proxy--------------gateway--------------next hop proxy > >proxy -> ip1:port1-> gateway -> ip2:port2 -> next hop proxy >next hop proxy -> replies to ip2:port1 (hybrid) -> screws my setup > > the next hop proxy is broken, why does it reply to ip2:port1? It should reply to source_ip and source_port of the received request. The proxy is not aware at all about ip2:port2 used by gateway. Daniel >can you suggest me some way to overcome this. > >Regards, >Ranveer. > >On 8/11/05, Daniel-Constantin Mierla <daniel(a)voice-system.ro> wrote: > > >>Hello, >> >>On 08/10/05 21:10, ranveer kunal wrote: >> >> >> >>>hi daniel, >>> as far as i have explored force_rport(), places the rport >>>parameter in the topmost via header and not in its own via header. am >>>i right ? >>> >>>example : >>> >>>UAC -> (via1:via2:via3)proxy(force_rport)->(via1:via2:via3,rport:via4)next proxy >>> >>>i want this : >>>UAC -> (via1:via2:via3)proxy(force_rport)->(via1:via2:via3:via4,rport)next proxy >>> >>>Please clarify it ? >>> >>> >>> >>> >>yes, it is like that. And this is how it is supposed to be, according to >>RFC3581. Why do you need it in proxy's via? The proxy will look at the >>second via to get the destination address for reply. >> >>Daniel >> >> >> >>>Regards, >>>Ranveer. >>> >>>On 8/10/05, Daniel-Constantin Mierla <daniel(a)voice-system.ro> wrote: >>> >>> >>> >>> >>>>Hello, >>>> >>>>you have to use force_rport() in the configuration file for the request >>>>you want rport parameter in VIA. >>>> >>>>Daniel >>>> >>>> >>>>On 08/10/05 20:44, ranveer kunal wrote: >>>> >>>> >>>> >>>> >>>> >>>>>hi all, >>>>> Is there a way to configure openser so that it sends rport in >>>>>via header ? Actually th packet from server is reverse natted through >>>>>another system using any random port, i want it the reply to come on >>>>>the same port . thanks .... >>>>> >>>>>Regards, >>>>>Ranveer. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>> >>> >>> >>> > > > >

19 years, 3 months

[Serusers] MEdiaproxy web page

by Ashutosh Kumar

Hi, The web page media_sessions.phtml supplied with mediaproxy doesn't show the rtp seesions active on my sip server. I tried changing the value in the server array list in this php file to the physical ip, localohost , but of no avail.The output is always the following, Server Version Caller traffic Called traffic Relayed traffic Sessions Status 1 localhost Connection refused Why is the connection refused? Regards, Ashutosh Kumar Chetu, Inc. Ph : 1(305) 402 6724 - Witin US Ph : 91 120 5323340 - Outside US Fax:1 (305) 832 5987 For more information, please visit http://www.chetu.com

19 years, 3 months

[Serusers] Billing software

by Marc Khayat

Hi all, What do you recommend (and are using) as billing software freeware and/or shareware that interacts with SER (and, if possible, with GnuGK)? Thanks, Marc

19 years, 3 months

[Serusers] Medaiproxy not working properly

by Ashutosh Kumar

Hi, I m runnunig mediaproxy with ser-0.9.0. Most of the times, it is working fine. But sometimes there is one way or both sides audio problem when both clients are NATTED. On digging deeper, I see as one of the participating NATTED phone having an aor (address of record) as username@userIP:5060. IS this assignment of port 5060 a problem? The problem is that more than one clients/phones in that NAT have this same AOR, which might be causing this problem. Further, no natted client should be assigned 5060 by the nat for port forwarding as far as I think, correct me if I m wrong. Additionally, I m using the default mediaproxy.ini, the only change is the proxyIP, which has the value of my machin's IP on which mediaproxy is running. Can someone send me a correctly working mediaproxy.ini config. Regards, Ashutosh Kumar Chetu, Inc. Ph : 1(305) 402 6724 - Witin US Ph : 91 120 5323340 - Outside US Fax:1 (305) 832 5987 For more information, please visit http://www.chetu.com

19 years, 3 months

[Serusers] compilation of ser.cfg

by rupesh

hello , i am new to SER. i have made some modification in the ser.cfg file in ser 0.9.3 version . now i want to compile this ser.cfg file so that the changes which i have made can effect the ser, but am unable to compile. can someone help me with this. can u tell me the compilation steps.i have checked in the getting started document and the install document from iptel also, but of no use. waiting for someone to help me out. thank you, Rupesh

19 years, 3 months

← Newer
1
...
33
34
35
36
37
38
39
...
56
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users August 2005