sr-users January 2006

sr-users@lists.kamailio.org

134 participants
258 discussions

by Craig Mariner

Hi List I have a problem with OpenSER. OpenSER has a public IP and is not behind a NAT. Two clients that are behind a NAT ring each other but there is no audio either way. Any advise please? Sencond scenario two clients both behind the same NAT. . Client1 calls the Client2, Client2 UA rings, Client2 answers the call but it does not connect. Client1 call does not get answered by Client2 and Client1 just hears the ringing tone. Any ideas? Best Regards -- Craig Mariner Director Wifi Specialist Ltd www.wifispecialist.co.uk www.freewhy-fi.net Building a Free Mesh Network Tel. 08703403427 email: wifibase(a)gmail.com

18 years, 10 months

[Users] infinite register loop with eyeBeam when call forking one an SER proxy

by Dr. Rodney G. McDuff

I am using SER 0.9.4 as a sip proxy. In the proxy I have setup a permanent user location pointing to our cisco sip/PSTN gateway; the idea being that when I ring my sip address it rings both my PSTN phone and my sip client. When I use X-Lite it all works perfectly. X-Lite REGISTERs a couple of times and when I INVITE someone sip URI both phones rings. First phone that asnwers get the prize all others get a CANCEL. When I use eyebeam [eyeBeam release 3010n stamp 19039] all I get is a seemingly infinite loop of REGISTERs with incrementing Cseq. Below is a ngrep at the proxy. Has anyone seen this behavior and known if its a bug with eyeBeam or the SER config? T xxx.xxx.152.78:1758 -> xxx.xxx.2.40:5060 [AP] REGISTER sip:sip.domain SIP/2.0. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-4152d5791948a902-1--d87543-;rport. Max-Forwards: 70. Contact: <sip:username@xxx.xxx.152.78:1758>. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 375 REGISTER. Expires: 3600. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO. Supported: eventlist. User-Agent: eyeBeam release 3010n stamp 19039. Authorization: Digest username="username",realm="sip.domain",nonce="43cc8e5a5cb47d54a7c640016623a782b1206e3b",uri="sip:sip.domain",response="cdae7a3787b5539f61c1b20087efc3e0",algorithm=MD5. Content-Length: 0. . # T xxx.xxx.2.40:5060 -> xxx.xxx.152.78:1758 [AP] SIP/2.0 100 Trying. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-4152d5791948a902-1--d87543-;rport=1758. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 375 REGISTER. Server: Sip EXpress router (0.9.4 (i386/linux)). Content-Length: 0. Warning: 392 xxx.xxx.2.40:5060 "Noisy feedback tells: pid=11879 req_src_ip=xxx.xxx.152.78 req_src_port=1758 in_uri=sip:sip.domain out_uri=sip:sip.domain via_cnt==1". . # T xxx.xxx.2.40:5060 -> xxx.xxx.152.78:1758 [AP] SIP/2.0 200 OK. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-4152d5791948a902-1--d87543-;rport=1758. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=b5c61af9a6130f64fdf89dc761547723.a060. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 375 REGISTER. Contact: <sip:58220@sip.pstn.gw.ip>;q=1;expires=4294965840, <sip:username@xxx.xxx.152.57:5060>;expires=503;received="sip:xxx.xxx.152.57:5060", <sip:username@xxx.xxx.152.78:5060>;expires=1356, <sip:username@xxx.xxx.152.78:1758>;expires=3600. Server: Sip EXpress router (0.9.4 (i386/linux)). Content-Length: 0. Warning: 392 xxx.xxx.2.40:5060 "Noisy feedback tells: pid=11879 req_src_ip=xxx.xxx.152.78 req_src_port=1758 in_uri=sip:sip.domain out_uri=sip:sip.domain via_cnt==1". . ## T xxx.xxx.152.78:1758 -> xxx.xxx.2.40:5060 [AP] REGISTER sip:sip.domain SIP/2.0. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-3d42141dce2ee012-1--d87543-;rport. Max-Forwards: 70. Contact: <sip:username@xxx.xxx.152.78:1758>. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 376 REGISTER. Expires: 3600. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO. Supported: eventlist. User-Agent: eyeBeam release 3010n stamp 19039. Authorization: Digest username="username",realm="sip.domain",nonce="43cc8e5a5cb47d54a7c640016623a782b1206e3b",uri="sip:sip.domain",response="cdae7a3787b5539f61c1b20087efc3e0",algorithm=MD5. Content-Length: 0. . # T xxx.xxx.2.40:5060 -> xxx.xxx.152.78:1758 [AP] SIP/2.0 100 Trying. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-3d42141dce2ee012-1--d87543-;rport=1758. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 376 REGISTER. Server: Sip EXpress router (0.9.4 (i386/linux)). Content-Length: 0. Warning: 392 xxx.xxx.2.40:5060 "Noisy feedback tells: pid=11879 req_src_ip=xxx.xxx.152.78 req_src_port=1758 in_uri=sip:sip.domain out_uri=sip:sip.domain via_cnt==1". . # T xxx.xxx.2.40:5060 -> xxx.xxx.152.78:1758 [AP] SIP/2.0 200 OK. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-3d42141dce2ee012-1--d87543-;rport=1758. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=b5c61af9a6130f64fdf89dc761547723.80b3. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 376 REGISTER. Contact: <sip:58220@sip.pstn.gw.ip>;q=1;expires=4294965840, <sip:username@xxx.xxx.152.57:5060>;expires=503;received="sip:xxx.xxx.152.57:5060", <sip:username@xxx.xxx.152.78:5060>;expires=1356, <sip:username@xxx.xxx.152.78:1758>;expires=3600. Server: Sip EXpress router (0.9.4 (i386/linux)). Content-Length: 0. Warning: 392 xxx.xxx.2.40:5060 "Noisy feedback tells: pid=11879 req_src_ip=xxx.xxx.152.78 req_src_port=1758 in_uri=sip:sip.domain out_uri=sip:sip.domain via_cnt==1". . ## T xxx.xxx.152.78:1758 -> xxx.xxx.2.40:5060 [AP] REGISTER sip:sip.domain SIP/2.0. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-5861a63d14707c05-1--d87543-;rport. Max-Forwards: 70. Contact: <sip:username@xxx.xxx.152.78:1758>. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 377 REGISTER. Expires: 3600. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO. Supported: eventlist. User-Agent: eyeBeam release 3010n stamp 19039. Authorization: Digest username="username",realm="sip.domain",nonce="43cc8e5a5cb47d54a7c640016623a782b1206e3b",uri="sip:sip.domain",response="cdae7a3787b5539f61c1b20087efc3e0",algorithm=MD5. Content-Length: 0. . # T xxx.xxx.2.40:5060 -> xxx.xxx.152.78:1758 [AP] SIP/2.0 100 Trying. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-5861a63d14707c05-1--d87543-;rport=1758. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 377 REGISTER. Server: Sip EXpress router (0.9.4 (i386/linux)). Content-Length: 0. Warning: 392 xxx.xxx.2.40:5060 "Noisy feedback tells: pid=11879 req_src_ip=xxx.xxx.152.78 req_src_port=1758 in_uri=sip:sip.domain out_uri=sip:sip.domain via_cnt==1". . # T xxx.xxx.2.40:5060 -> xxx.xxx.152.78:1758 [AP] SIP/2.0 200 OK. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-5861a63d14707c05-1--d87543-;rport=1758. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=b5c61af9a6130f64fdf89dc761547723.2412. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 377 REGISTER. Contact: <sip:58220@sip.pstn.gw.ip>;q=1;expires=4294965839, <sip:username@xxx.xxx.152.57:5060>;expires=502;received="sip:xxx.xxx.152.57:5060", <sip:username@xxx.xxx.152.78:5060>;expires=1355, <sip:username@xxx.xxx.152.78:1758>;expires=3600. Server: Sip EXpress router (0.9.4 (i386/linux)). Content-Length: 0. Warning: 392 xxx.xxx.2.40:5060 "Noisy feedback tells: pid=11879 req_src_ip=xxx.xxx.152.78 req_src_port=1758 in_uri=sip:sip.domain out_uri=sip:sip.domain via_cnt==1". . ## U xxx.xxx.152.78:5060 -> xxx.xxx.2.40:5060 . # T xxx.xxx.152.78:1758 -> xxx.xxx.2.40:5060 [AP] REGISTER sip:sip.domain SIP/2.0. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-4675e1000b2e3f40-1--d87543-;rport. Max-Forwards: 70. Contact: <sip:username@xxx.xxx.152.78:1758>. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 378 REGISTER. Expires: 3600. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO. Supported: eventlist. User-Agent: eyeBeam release 3010n stamp 19039. Authorization: Digest username="username",realm="sip.domain",nonce="43cc8e5a5cb47d54a7c640016623a782b1206e3b",uri="sip:sip.domain",response="cdae7a3787b5539f61c1b20087efc3e0",algorithm=MD5. Content-Length: 0. . # T xxx.xxx.2.40:5060 -> xxx.xxx.152.78:1758 [AP] SIP/2.0 100 Trying. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-4675e1000b2e3f40-1--d87543-;rport=1758. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 378 REGISTER. Server: Sip EXpress router (0.9.4 (i386/linux)). Content-Length: 0. Warning: 392 xxx.xxx.2.40:5060 "Noisy feedback tells: pid=11879 req_src_ip=xxx.xxx.152.78 req_src_port=1758 in_uri=sip:sip.domain out_uri=sip:sip.domain via_cnt==1". . # T xxx.xxx.2.40:5060 -> xxx.xxx.152.78:1758 [AP] SIP/2.0 200 OK. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-4675e1000b2e3f40-1--d87543-;rport=1758. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=b5c61af9a6130f64fdf89dc761547723.9461. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 378 REGISTER. Contact: <sip:58220@sip.pstn.gw.ip>;q=1;expires=4294965839, <sip:username@xxx.xxx.152.57:5060>;expires=502;received="sip:xxx.xxx.152.57:5060", <sip:username@xxx.xxx.152.78:5060>;expires=1355, <sip:username@xxx.xxx.152.78:1758>;expires=3600. Server: Sip EXpress router (0.9.4 (i386/linux)). Content-Length: 0. Warning: 392 xxx.xxx.2.40:5060 "Noisy feedback tells: pid=11879 req_src_ip=xxx.xxx.152.78 req_src_port=1758 in_uri=sip:sip.domain out_uri=sip:sip.domain via_cnt==1". . ## T xxx.xxx.152.78:1758 -> xxx.xxx.2.40:5060 [AP] REGISTER sip:sip.domain SIP/2.0. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-5f45fd45452d0a56-1--d87543-;rport. Max-Forwards: 70. Contact: <sip:username@xxx.xxx.152.78:1758>. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 379 REGISTER. Expires: 3600. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO. Supported: eventlist. User-Agent: eyeBeam release 3010n stamp 19039. Authorization: Digest username="username",realm="sip.domain",nonce="43cc8e5a5cb47d54a7c640016623a782b1206e3b",uri="sip:sip.domain",response="cdae7a3787b5539f61c1b20087efc3e0",algorithm=MD5. Content-Length: 0. . # T xxx.xxx.2.40:5060 -> xxx.xxx.152.78:1758 [AP] SIP/2.0 100 Trying. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-5f45fd45452d0a56-1--d87543-;rport=1758. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 379 REGISTER. Server: Sip EXpress router (0.9.4 (i386/linux)). Content-Length: 0. Warning: 392 xxx.xxx.2.40:5060 "Noisy feedback tells: pid=11879 req_src_ip=xxx.xxx.152.78 req_src_port=1758 in_uri=sip:sip.domain out_uri=sip:sip.domain via_cnt==1". . # T xxx.xxx.2.40:5060 -> xxx.xxx.152.78:1758 [AP] SIP/2.0 200 OK. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-5f45fd45452d0a56-1--d87543-;rport=1758. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=b5c61af9a6130f64fdf89dc761547723.7aca. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 379 REGISTER. Contact: <sip:58220@sip.pstn.gw.ip>;q=1;expires=4294965839, <sip:username@xxx.xxx.152.57:5060>;expires=502;received="sip:xxx.xxx.152.57:5060", <sip:username@xxx.xxx.152.78:5060>;expires=1355, <sip:username@xxx.xxx.152.78:1758>;expires=3600. Server: Sip EXpress router (0.9.4 (i386/linux)). Content-Length: 0. Warning: 392 xxx.xxx.2.40:5060 "Noisy feedback tells: pid=11879 req_src_ip=xxx.xxx.152.78 req_src_port=1758 in_uri=sip:sip.domain out_uri=sip:sip.domain via_cnt==1". . ## T xxx.xxx.152.78:1758 -> xxx.xxx.2.40:5060 [AP] REGISTER sip:sip.domain SIP/2.0. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-277dc139635ed406-1--d87543-;rport. Max-Forwards: 70. Contact: <sip:username@xxx.xxx.152.78:1758>. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 380 REGISTER. Expires: 3600. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO. Supported: eventlist. User-Agent: eyeBeam release 3010n stamp 19039. Authorization: Digest username="username",realm="sip.domain",nonce="43cc8e5a5cb47d54a7c640016623a782b1206e3b",uri="sip:sip.domain",response="cdae7a3787b5539f61c1b20087efc3e0",algorithm=MD5. Content-Length: 0. . # T xxx.xxx.2.40:5060 -> xxx.xxx.152.78:1758 [AP] SIP/2.0 100 Trying. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-277dc139635ed406-1--d87543-;rport=1758. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 380 REGISTER. Server: Sip EXpress router (0.9.4 (i386/linux)). Content-Length: 0. Warning: 392 xxx.xxx.2.40:5060 "Noisy feedback tells: pid=11879 req_src_ip=xxx.xxx.152.78 req_src_port=1758 in_uri=sip:sip.domain out_uri=sip:sip.domain via_cnt==1". . # T xxx.xxx.2.40:5060 -> xxx.xxx.152.78:1758 [AP] SIP/2.0 200 OK. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-277dc139635ed406-1--d87543-;rport=1758. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=b5c61af9a6130f64fdf89dc761547723.5668. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 380 REGISTER. Contact: <sip:58220@sip.pstn.gw.ip>;q=1;expires=4294965839, <sip:username@xxx.xxx.152.57:5060>;expires=502;received="sip:xxx.xxx.152.57:5060", <sip:username@xxx.xxx.152.78:5060>;expires=1355, <sip:username@xxx.xxx.152.78:1758>;expires=3600. Server: Sip EXpress router (0.9.4 (i386/linux)). Content-Length: 0. Warning: 392 xxx.xxx.2.40:5060 "Noisy feedback tells: pid=11879 req_src_ip=xxx.xxx.152.78 req_src_port=1758 in_uri=sip:sip.domain out_uri=sip:sip.domain via_cnt==1". . ## T xxx.xxx.152.78:1758 -> xxx.xxx.2.40:5060 [AP] REGISTER sip:sip.domain SIP/2.0. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-3e3eaf4bb77a4835-1--d87543-;rport. Max-Forwards: 70. Contact: <sip:username@xxx.xxx.152.78:1758>. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 381 REGISTER. Expires: 3600. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO. Supported: eventlist. User-Agent: eyeBeam release 3010n stamp 19039. Authorization: Digest username="username",realm="sip.domain",nonce="43cc8e5a5cb47d54a7c640016623a782b1206e3b",uri="sip:sip.domain",response="cdae7a3787b5539f61c1b20087efc3e0",algorithm=MD5. Content-Length: 0. . # T xxx.xxx.2.40:5060 -> xxx.xxx.152.78:1758 [AP] SIP/2.0 100 Trying. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-3e3eaf4bb77a4835-1--d87543-;rport=1758. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 381 REGISTER. Server: Sip EXpress router (0.9.4 (i386/linux)). Content-Length: 0. Warning: 392 xxx.xxx.2.40:5060 "Noisy feedback tells: pid=11879 req_src_ip=xxx.xxx.152.78 req_src_port=1758 in_uri=sip:sip.domain out_uri=sip:sip.domain via_cnt==1". . # T xxx.xxx.2.40:5060 -> xxx.xxx.152.78:1758 [AP] SIP/2.0 200 OK. Via: SIP/2.0/TCP xxx.xxx.152.78:8970;branch=z9hG4bK-d87543-3e3eaf4bb77a4835-1--d87543-;rport=1758. To: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=b5c61af9a6130f64fdf89dc761547723.641b. From: "Unhappy eyeBeam Client"<sip:username@sip.domain>;tag=5b23e370. Call-ID: 480f10142f438b44@c3RnLWRlbGw.. CSeq: 381 REGISTER. Contact: <sip:58220@sip.pstn.gw.ip>;q=1;expires=4294965839, <sip:username@xxx.xxx.152.57:5060>;expires=502;received="sip:xxx.xxx.152.57:5060", <sip:username@xxx.xxx.152.78:5060>;expires=1355, <sip:username@xxx.xxx.152.78:1758>;expires=3600. Server: Sip EXpress router (0.9.4 (i386/linux)). Content-Length: 0. Warning: 392 xxx.xxx.2.40:5060 "Noisy feedback tells: pid=11879 req_src_ip=xxx.xxx.152.78 req_src_port=1758 in_uri=sip:sip.domain out_uri=sip:sip.domain via_cnt==1". . -- Dr. Rodney G. McDuff |Ex ignorantia ad sapientiam Manager, Strategic Technologies Group| Ex luce ad tenebras Information Technology Services | The University of Queensland | EMAIL: mcduff(a)its.uq.edu.au | TELEPHONE: +61 7 3365 8220 |

18 years, 10 months

[Users] requirement of using mediaproxy

by unplug

I am using the features-callfwd.cfg script with mediaproxy in a testing server. I can make call directly from phone to phone and forward call. However, it is failed to forward call on no answer and forward call on busy. In my testing server, it only has a network interface. I wonder if it is the cause of the problem. Does it need to have 2 network interfaces (one for external and one for internal) for those forward features work?

18 years, 10 months

[Users] openser+freeradius

by Henri Keski-Sikkilä

I installed freeradius. When I tried to register, syslog message is: Jan 14 20:39:36 localhost /usr/sbin/openser[1280]: rc_get_seqnbr: fscanf failure: /var/run/radius.seq Jan 14 20:39:38 localhost /usr/sbin/openser[1280]: ERROR:auth_radius:radius_authorize_sterman: rc_auth failed Any ideas? Henri

18 years, 10 months

[Users] database description

by Daniel-Constantin Mierla

Hello, courtesy of Norman Brandinger, there is now a new tutorial describing the tables in OpenSER Database. http://openser.org/docs/OpenSER_Database_Structure.html The dokuwiki page which was create to collect users' contributions in this respect will point to this tutorial. If anyone wants to contribute with more description, please sent email to devel(a)openser.org or add the text in the dokiwiki page. http://openser.org/dokuwiki/doku.php?id=database_description Cheers, Daniel

18 years, 10 months

[Users] How to use the failover support in the dispatcher module?

by Wolfgang Hottgenroth

Hi, on 18. 12. 2005 Daniel-Constantin Mierla accounted on this list that the dispatcher module now has a kind of failover support. I was really curious for this feature, since I had to config openser to support both load-balancing and failover. Failover works fine: if one PSTNGW is not available, the next one is tried, until one works. But unfortunately, for negative status reports (like 'busy'), the failure_route is also entered and thereby also the failover mechanism is triggered, with the result that a 'busy' is signalled to the A-side as 'no more gws'. (I've tried different mechanisms for ds_select_domain, also I tried with and without the append_branch in the failure_route block.) Any hints for me? Thank you very much! Wolfgang debug=3 fork=yes log_stderror=yes # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo" # ------------------ module loading ---------------------------------- loadmodule "/opt/openser/lib/openser/modules/sl.so" loadmodule "/opt/openser/lib/openser/modules/tm.so" loadmodule "/opt/openser/lib/openser/modules/rr.so" loadmodule "/opt/openser/lib/openser/modules/maxfwd.so" loadmodule "/opt/openser/lib/openser/modules/usrloc.so" loadmodule "/opt/openser/lib/openser/modules/registrar.so" loadmodule "/opt/openser/lib/openser/modules/textops.so" loadmodule "/opt/openser/lib/openser/modules/xlog.so" loadmodule "/opt/openser/lib/openser/modules/dispatcher.so" # ----------------- setting module-specific parameters --------------- modparam("rr", "enable_full_lr", 1) modparam("xlog", "buf_size", 8192) modparam("dispatcher", "list_file", "/opt/openser/etc/openser/dispatcher.list") modparam("dispatcher", "force_dst", 1) modparam("dispatcher", "flags", 3) modparam("tm", "fr_timer", 5) # ------------------------- request routing logic ------------------- # main routing logic route[0] { xlog("L_NOTICE", "----> before route 1 <----\n"); route(1); xlog("L_NOTICE", "----> after route 1 <----\n"); } route[1] { if (loose_route()) { xlog("L_NOTICE", "*** loose routing enforced: $rm, $ru, $si, $du\n"); t_relay(); return; } record_route(); xlog("L_NOTICE", "REQUEST: $rm, $ru, $si, $du\n"); if (method=="REGISTER") { xlog("L_NOTICE", "*** register request from $si\n"); sl_send_reply("503", "No registrar service here"); return; } if (method=="INVITE" && ! uri=~"^sip:\+[1-9][0-9]+@") { xlog("L_NOTICE", "*** illegal sip uri: $ru\n"); sl_send_reply("484", "International number required"); return; } # --- customer specific part --------------------------------------- if ( src_ip==62.191.185.122 ) { xlog("L_NOTICE", "*** $rm from laptop-who, $si\n"); append_hf("P-Hint: from laptop-who\n"); append_hf("Remote-Party-ID: <sip:+492319721231@62.191.185.47>;party=calling;screen=yes;privacy=off\n"); if (method=="INVITE") { strip(1); prefix("+0000666666"); } ds_select_domain("00", "4"); if (method=="INVITE") { t_on_failure("2"); } xlog("L_NOTICE", "----> before t_relay <----\n"); t_relay(); xlog("L_NOTICE", "----> after t_relay <----\n"); return; } if ( src_ip==62.191.185.29 ) { xlog("L_NOTICE", "*** $rm from laptop-aholt, $si\n"); append_hf("P-Hint: from laptop-aholt\n"); append_hf("Remote-Party-ID: <sip:+492319721231@62.191.185.47>;party=calling;screen=yes;privacy=off\n"); if (method=="INVITE") { strip(1); prefix("+0100555555"); } ds_select_domain("01", "4"); if (method=="INVITE") { t_on_failure("2"); } xlog("L_NOTICE", "----> before t_relay <----\n"); t_relay(); xlog("L_NOTICE", "----> after t_relay <----\n"); return; } if ( src_ip==62.191.185.53 ) { xlog("L_NOTICE", "*** $rm from ipphone-who, $si\n"); append_hf("P-Hint: from ipphone-who\n"); append_hf("Remote-Party-ID: <sip:+492319721231@62.191.185.47>;party=calling;screen=yes;privacy=off\n"); if (method=="INVITE") { strip(1); prefix("+0100555555"); } ds_select_domain("01", "4"); if (method=="INVITE") { t_on_failure("2"); } xlog("L_NOTICE", "----> before t_relay <----\n"); t_relay(); xlog("L_NOTICE", "----> after t_relay <----\n"); return; } if ( src_ip==127.0.2.1 || src_ip==127.0.2.2 ) { xlog("L_NOTICE", "*** $rm from cust3, $si\n"); append_hf("P-Hint: from cust3\n"); append_hf("Remote-Party-ID: <sip:+492319721231@62.191.185.47>;party=calling;screen=yes;privacy=off\n"); if (method=="INVITE") { strip(1); prefix("+0200000003"); } ds_select_domain("02", "4"); if (method=="INVITE") { t_on_failure("2"); } xlog("L_NOTICE", "----> before t_relay <----\n"); t_relay(); xlog("L_NOTICE", "----> after t_relay <----\n"); return; } # ------------------------------------------------------------------ if (method=="INVITE") { xlog("L_NOTICE", "*** reject invite from $si\n"); t_reply("403", "Forbidden"); return; } xlog("L_NOTICE", "*** $rm from $si\n"); t_relay(); } failure_route[2] { xlog("L_NOTICE", "*** in failure_route 1: rc: $rc, rr: $rr, rs: $rs\n"); if (! ds_next_domain()) { t_reply("503", "Service unavailable: no more gws"); return; } else { append_branch(); t_on_failure("2"); t_relay(); return; } } # $Id: main.m4,v 1.3 2006/01/12 15:27:42 whottgen.uu.net Exp $ debug=3 fork=yes log_stderror=yes # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo" # ------------------ module loading ---------------------------------- loadmodule "/opt/openser/lib/openser/modules/sl.so" loadmodule "/opt/openser/lib/openser/modules/tm.so" loadmodule "/opt/openser/lib/openser/modules/rr.so" loadmodule "/opt/openser/lib/openser/modules/maxfwd.so" loadmodule "/opt/openser/lib/openser/modules/usrloc.so" loadmodule "/opt/openser/lib/openser/modules/registrar.so" loadmodule "/opt/openser/lib/openser/modules/textops.so" loadmodule "/opt/openser/lib/openser/modules/xlog.so" loadmodule "/opt/openser/lib/openser/modules/dispatcher.so" # ----------------- setting module-specific parameters --------------- modparam("rr", "enable_full_lr", 1) modparam("xlog", "buf_size", 8192) modparam("dispatcher", "list_file", "/opt/openser/etc/openser/dispatcher.list") modparam("dispatcher", "force_dst", 1) modparam("dispatcher", "flags", 3) modparam("tm", "fr_timer", 5) # ------------------------- request routing logic ------------------- # main routing logic route[0] { xlog("L_NOTICE", "----> before route 1 <----\n"); route(1); xlog("L_NOTICE", "----> after route 1 <----\n"); } route[1] { if (loose_route()) { xlog("L_NOTICE", "*** loose routing enforced: $rm, $ru, $si, $du\n"); t_relay(); return; } record_route(); xlog("L_NOTICE", "REQUEST: $rm, $ru, $si, $du\n"); if (method=="REGISTER") { xlog("L_NOTICE", "*** register request from $si\n"); sl_send_reply("503", "No registrar service here"); return; } if (method=="INVITE" && ! uri=~"^sip:\+[1-9][0-9]+@") { xlog("L_NOTICE", "*** illegal sip uri: $ru\n"); sl_send_reply("484", "International number required"); return; } # --- customer specific part --------------------------------------- if ( src_ip==62.191.185.122 ) { xlog("L_NOTICE", "*** $rm from laptop-who, $si\n"); append_hf("P-Hint: from laptop-who\n"); append_hf("Remote-Party-ID: <sip:+492319721231@62.191.185.47>;party=calling;screen=yes;privacy=off\n"); if (method=="INVITE") { strip(1); prefix("+0000666666"); } ds_select_domain("00", "4"); if (method=="INVITE") { t_on_failure("2"); } xlog("L_NOTICE", "----> before t_relay <----\n"); t_relay(); xlog("L_NOTICE", "----> after t_relay <----\n"); return; } if ( src_ip==62.191.185.29 ) { xlog("L_NOTICE", "*** $rm from laptop-aholt, $si\n"); append_hf("P-Hint: from laptop-aholt\n"); append_hf("Remote-Party-ID: <sip:+492319721231@62.191.185.47>;party=calling;screen=yes;privacy=off\n"); if (method=="INVITE") { strip(1); prefix("+0100555555"); } ds_select_domain("01", "4"); if (method=="INVITE") { t_on_failure("2"); } xlog("L_NOTICE", "----> before t_relay <----\n"); t_relay(); xlog("L_NOTICE", "----> after t_relay <----\n"); return; } if ( src_ip==62.191.185.53 ) { xlog("L_NOTICE", "*** $rm from ipphone-who, $si\n"); append_hf("P-Hint: from ipphone-who\n"); append_hf("Remote-Party-ID: <sip:+492319721231@62.191.185.47>;party=calling;screen=yes;privacy=off\n"); if (method=="INVITE") { strip(1); prefix("+0100555555"); } ds_select_domain("01", "4"); if (method=="INVITE") { t_on_failure("2"); } xlog("L_NOTICE", "----> before t_relay <----\n"); t_relay(); xlog("L_NOTICE", "----> after t_relay <----\n"); return; } if ( src_ip==127.0.2.1 || src_ip==127.0.2.2 ) { xlog("L_NOTICE", "*** $rm from cust3, $si\n"); append_hf("P-Hint: from cust3\n"); append_hf("Remote-Party-ID: <sip:+492319721231@62.191.185.47>;party=calling;screen=yes;privacy=off\n"); if (method=="INVITE") { strip(1); prefix("+0200000003"); } ds_select_domain("02", "4"); if (method=="INVITE") { t_on_failure("2"); } xlog("L_NOTICE", "----> before t_relay <----\n"); t_relay(); xlog("L_NOTICE", "----> after t_relay <----\n"); return; } # ------------------------------------------------------------------ if (method=="INVITE") { xlog("L_NOTICE", "*** reject invite from $si\n"); t_reply("403", "Forbidden"); return; } xlog("L_NOTICE", "*** $rm from $si\n"); t_relay(); } failure_route[2] { xlog("L_NOTICE", "*** in failure_route 1: rc: $rc, rr: $rr, rs: $rs\n"); if (! ds_next_domain()) { t_reply("503", "Service unavailable: no more gws"); return; } else { append_branch(); t_on_failure("2"); t_relay(); return; } } main.cfg: main.mc m4/main.m4 m4/subs.m4 m4 -I ./m4 $< > $@ 00 sip:139.4.200.6:5060 01 sip:139.4.200.6:5060 include(`subs.m4') define(`_PKG_PATH_', `/opt/openser') define(`_INST_NAME_', `MAIN') define(`_DEBUG_LEVEL_', `3') CUST_BLOCK(`62.191.185.122', `laptop-who', `00', `0', `0666666') CUST_BLOCK(`62.191.185.29', `laptop-aholt', `01', `0', `0555555') CUST_BLOCK(`62.191.185.53', `ipphone-who', `01', `0', `0555555') CUST_BLOCK(`127.0.2.1,127.0.2.2', `cust3', `02', `0', `0000003') include(`main.m4') dnl dnl Main part of the SER configuration file dnl dnl dnl # $Id: main.m4,v 1.4 2006/01/13 14:29:06 whottgen.uu.net Exp $ divert(-1) ifdef(`_PKG_PATH_', `', ` errprint(`*** Package path not defined *** ')m4exit(1)') ifdef(`_INST_NAME_', `', ` errprint(`*** Instance name not defined *** ')m4exit(1)') define(`_MODULE_PATH_', _PKG_PATH_`/lib/openser/modules') ifdef(`_DEBUG_LEVEL_', `', ` define(_DEBUG_LEVEL_, `9')') divert debug=_DEBUG_LEVEL_ fork=yes log_stderror=yes # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo" # ------------------ module loading ---------------------------------- loadmodule "_MODULE_PATH_/sl.so" loadmodule "_MODULE_PATH_/tm.so" loadmodule "_MODULE_PATH_/rr.so" loadmodule "_MODULE_PATH_/maxfwd.so" loadmodule "_MODULE_PATH_/usrloc.so" loadmodule "_MODULE_PATH_/registrar.so" loadmodule "_MODULE_PATH_/textops.so" loadmodule "_MODULE_PATH_/xlog.so" loadmodule "_MODULE_PATH_/dispatcher.so" # ----------------- setting module-specific parameters --------------- modparam("rr", "enable_full_lr", 1) modparam("xlog", "buf_size", 8192) modparam("dispatcher", "list_file", "/opt/openser/etc/openser/dispatcher.list") modparam("dispatcher", "force_dst", 1) modparam("dispatcher", "flags", 3) modparam("tm", "fr_timer", 5) # ------------------------- request routing logic ------------------- # main routing logic route[0] { xlog("L_NOTICE", "----> before route 1 <----\n"); route(1); xlog("L_NOTICE", "----> after route 1 <----\n"); } route[1] { if (loose_route()) { xlog("L_NOTICE", "*** loose routing enforced: $rm, $ru, $si, $du\n"); t_relay(); return; } record_route(); xlog("L_NOTICE", "REQUEST: $rm, $ru, $si, $du\n"); if (method=="REGISTER") { xlog("L_NOTICE", "*** register request from $si\n"); sl_send_reply("503", "No registrar service here"); return; } if (method=="INVITE" && ! uri=~"^sip:\+[1-9][0-9]+@") { xlog("L_NOTICE", "*** illegal sip uri: $ru\n"); sl_send_reply("484", "International number format required"); return; } # --- customer specific part --------------------------------------- undivert(2) # ------------------------------------------------------------------ if (method=="INVITE") { xlog("L_NOTICE", "*** reject invite from $si\n"); t_reply("403", "Forbidden"); return; } xlog("L_NOTICE", "*** $rm from $si\n"); t_relay(); } failure_route[2] { xlog("L_NOTICE", "*** in failure_route 1: rc: $rc, rr: $rr, rs: $rs\n"); if (! ds_next_domain()) { t_reply("503", "Service unavailable: no more gws"); return; } else { append_branch(); t_on_failure("2"); t_relay(); return; } } divert(-1) define(`CUST_IP_PRINT', `src_ip=='$1) define(`CUST_IP_FOREACH', `dnl ifelse($#, 0, `',dnl $#, 1, `CUST_IP_PRINT($1)',dnl `CUST_IP_PRINT($1) || CUST_IP_FOREACH(shift($@))')') define(`CUST_BLOCK', ` divert(2) if ( CUST_IP_FOREACH($1) ) { xlog("L_NOTICE", "*** $rm from '$2`, $si\n"); append_hf("P-Hint: from '$2`\n"); append_hf("Remote-Party-ID: <sip:+492319721231@62.191.185.47>;party=calling;screen=yes;privacy=off\n"); if (method=="INVITE") { strip(1); prefix("+'$3$4$5`"); } ds_select_domain("'$3`", "4"); if (method=="INVITE") { t_on_failure("2"); } xlog("L_NOTICE", "----> before t_relay <----\n"); t_relay(); xlog("L_NOTICE", "----> after t_relay <----\n"); return; } divert ') divert

18 years, 10 months

[Users] Problem with IAX and Openser.

by david.castro

Thank you Daniel. The ouput is this: U 2006/01/16 11:49:22.392147 10.2.11.35:5062 -> 10.2.11.35:5060 INVITE sip:204@10.2.11.35 SIP/2.0..Via: SIP/2.0/UDP 10.2.11.35:5062;branch=z9hG4bK5c440b0c;rport..From: "David" <sip:"D avid"<sip:205@1021150@10.2.11.35:5062>;tag=as4a705794..To: <sip:204@10.2.11.35>..Contact: <sip:"David"<sip:205@1021150@ 10.2.11.35:5062>..Call-ID: 2d64d7461241acaf11db6bb21cd4830a@10.2.11.35..CSeq: 102 INVITE..User-Agent: Asterisk PBX..Max -Forwards: 70..Date: Mon, 16 Jan 2006 10:49:22 GMT..Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY. .Content-Type: application/sdp..Content-Length: 463....v=0..o=root 15086 15086 IN IP4 10.2.11.35..s=session..c=IN IP4 1 0.2.11.35..t=0 0..m=audio 17016 RTP/AVP 0 8 4 111 18 3 97 7 110 5 101..a=rtpmap:0 PCMU/8000..a=rtpmap:8 PCMA/8000..a=rt pmap:4 G723/8000..a=rtpmap:111 G726-32/8000..a=rtpmap:18 G729/8000..a=fmtp:18 annexb=no..a=rtpmap:3 GSM/8000..a=rtpmap: 97 iLBC/8000..a=rtpmap:7 LPC/8000..a=rtpmap:110 speex/8000..a=rtpmap:5 DVI4/8000..a=rtpmap:101 telephone-event/8000..a= fmtp:101 0-16..a=silenceSupp:off - - - -.. U 2006/01/16 11:49:22.392610 10.2.11.35:5060 -> 10.2.11.35:5062 SIP/2.0 100 Trying..Via: SIP/2.0/UDP 10.2.11.35:5062;branch=z9hG4bK5c440b0c;rport=5062..From: "David" <sip:"David"<sip: 205@1021150@10.2.11.35:5062>;tag=as4a705794..To: <sip:204@10.2.11.35>..Call-ID: 2d64d7461241acaf11db6bb21cd4830a(a)10.2.1 1.35..CSeq: 102 INVITE..Server: OpenSer (1.0.0-tls (i386/linux))..Content-Length: 0..Warning: 392 10.2.11.35:5060 "Nois y feedback tells: pid=15870 req_src_ip=10.2.11.35 req_src_port=5062 in_uri=sip:204@10.2.11.35 out_uri=sip:204@10.2.11. 35 via_cnt==1".... U 2006/01/16 11:49:22.393443 10.2.11.35:5060 -> 10.2.11.35:5062 SIP/2.0 180 Ringing..Via: SIP/2.0/UDP 10.2.11.35:5062;branch=z9hG4bK5c440b0c;rport=5062..From: "David" <sip:"David"<sip :205@1021150@10.2.11.35:5062>;tag=as4a705794..To: <sip:204@10.2.11.35>;tag=329cfeaa6ded039da25ff8cbb8668bd2.1607..Call- ID: 2d64d7461241acaf11db6bb21cd4830a@10.2.11.35..CSeq: 102 INVITE..Server: OpenSer (1.0.0-tls (i386/linux))..Content-Le ngth: 0..Warning: 392 10.2.11.35:5060 "Noisy feedback tells: pid=15870 req_src_ip=10.2.11.35 req_src_port=5062 in_uri= sip:204@10.2.11.35 out_uri=sip:204@10.2.11.64:5060;transport=udp via_cnt==1".... U 2006/01/16 11:49:22.393731 10.2.11.35:5060 -> 10.2.11.35:5062 SIP/2.0 500 I'm terribly sorry, server error occurred (1/SL)..Via: SIP/2.0/UDP 10.2.11.35:5062;branch=z9hG4bK5c440b0c;r port=5062..From: "David" <sip:"David"<sip:205@1021150@10.2.11.35:5062>;tag=as4a705794..To: <sip:204@10.2.11.35>;tag=329 cfeaa6ded039da25ff8cbb8668bd2.1607..Call-ID: 2d64d7461241acaf11db6bb21cd4830a@10.2.11.35..CSeq: 102 INVITE..Server: Ope nSer (1.0.0-tls (i386/linux))..Content-Length: 0..Warning: 392 10.2.11.35:5060 "Noisy feedback tells: pid=15870 req_sr c_ip=10.2.11.35 req_src_port=5062 in_uri=sip:204@10.2.11.35 out_uri=sip:204@10.2.11.64:5060;transport=udp via_cnt==1".. .. U 2006/01/16 11:49:22.397810 10.2.11.35:5062 -> 10.2.11.35:5060 ACK sip:204@10.2.11.35 SIP/2.0..Via: SIP/2.0/UDP 10.2.11.35:5062;branch=z9hG4bK5c440b0c;rport..From: "David" <sip:"Davi d"<sip:205@1021150@10.2.11.35:5062>;tag=as4a705794..To: <sip:204@10.2.11.35>;tag=329cfeaa6ded039da25ff8cbb8668bd2.1607. .Contact: <sip:"David"<sip:205@1021150@10.2.11.35:5062>..Call-ID: 2d64d7461241acaf11db6bb21cd4830a@10.2.11.35..CSeq: 10 2 ACK..User-Agent: Asterisk PBX..Max-Forwards: 70..Content-Length: 0.... I saw the ouput and I think it's all right except the address: <sip:"David"<sip:205@1021150@10.2.11.35:5062> What do you think about all that?

18 years, 10 months

[Users] Problem with IAX and Openser.

by david.castro

I used ngrep -qt port 5060 but I don't get ouput in the screen, so I used: ngrep -qt, and the ouput was: U 2006/01/16 10:56:26.736394 10.2.11.50:4569 -> 10.2.11.35:4569 ..................204.."David"<sip:205@1021150..David..en..internal..david...................0V. U 2006/01/16 10:56:26.737313 10.2.11.35:4569 -> 10.2.11.50:4569 ..................205130695..david T 2006/01/16 10:56:26.736424 10.2.11.50:22 -> 10.2.11.35:60601 [AP] ].........I2..h.&......>,B.....X]OA.Q...@...b..a~..X.a..8...g.....)....y&.~.....@..+..<&....ly...b.{..Q...f..-..#...... ..d..\h....[.....He..&.]........._[..,.HZ|g..P.....r...f0.P.l{.....@..z........Y.&[......'..v......|.1.m.P.d.;M........ ..H$..T..<~z..Ra.. T 2006/01/16 10:56:26.736447 10.2.11.50:22 -> 10.2.11.35:60601 [AP] ..IM..D..X.Uv;.."..d...a.....q.Z:.7.l......Z..@.>-........~_..K^ U 2006/01/16 10:56:26.736538 10.2.11.50:4569 -> 10.2.11.35:4569 ............. b07125c8393cbdd4c3ca7b621bb678bc U 2006/01/16 10:56:26.736748 10.2.11.35:4569 -> 10.2.11.50:4569 .................. U 2006/01/16 10:56:26.736950 10.2.11.50:4569 -> 10.2.11.35:4569 ............ T 2006/01/16 10:56:26.737002 10.2.11.50:22 -> 10.2.11.35:60601 [AP] A.W..=..>n....S..>.....hI.PX@)..I.KHR.f2_j..5.....S.. ...h.....SH.og...zC.@...../.j..U?.Yk..%.m..........&...... T 2006/01/16 10:56:26.737065 10.2.11.50:22 -> 10.2.11.35:60601 [AP] r......]..G.n.w..H..'...rk...c..|0.`.......7.J........g....b.]Z...G.:^.f....p.[..b42..D.....t... U 2006/01/16 10:56:26.740189 10.2.11.35:4569 -> 10.2.11.50:4569 ............ U 2006/01/16 10:56:26.740263 10.2.11.35:4569 -> 10.2.11.50:4569 ............ U 2006/01/16 10:56:26.740314 10.2.11.50:4569 -> 10.2.11.35:4569 ............ U 2006/01/16 10:56:26.740381 10.2.11.50:4569 -> 10.2.11.35:4569 ............ T 2006/01/16 10:56:26.740535 10.2.11.50:22 -> 10.2.11.35:60601 [AP] ....z.O.Q,?....o...t...[..^.....0..2/X..98..M...'-...lP..I.......0..<.'.W..vDs....g...Y..G..v8.. T 2006/01/16 10:56:26.740566 10.2.11.50:22 -> 10.2.11.35:60601 [AP] ._.z...4....K^.#..J...`..l.0.)e..y.G.7.t.Y.t-W.5........41...K/.#..@..R......2T..m...J.K.:].....E.~le.....gh<-u% U 2006/01/16 10:56:26.740594 10.2.11.35:4569 -> 10.2.11.50:4569 ............*.& U 2006/01/16 10:56:26.740847 10.2.11.50:4569 -> 10.2.11.35:4569 ............ T 2006/01/16 10:56:26.741537 10.2.11.50:22 -> 10.2.11.35:60601 [AP] =.z..hym..f.z..H...8,.Uh:.....)r......j.&).".....=.Z$U... 13.....N......:.cn+L....../..:Q.....qX.."..Q\....3Z..N..1..y= ....!V....FR...j..MjpE=....j..r..k.......M..0..9.F...).M AI.-.....g..K.}S....8.z...N....3Z3.gQ?...,...#....H..5.dQ....- ...Tv.9z.....c.;..x....uq..........Ga....C... .......H}W})d....7...k..'d....LE..Kq..D!%4.yZ..?.'.......nBN.23...L)>..6. !.,......B.^.....v_.\.O.ER.J..}...7]8.bBj.. I saw this and I guess that sip packet is wrong, but I have in extexsion.conf: exten = _2XX,2,Dial(SIP/${EXTEN}@ser,100) I thought I was making a sip request. 2 notes: I have openser and asterisk in the same computer, asterisk has sip port 5062 and openser 5060. I test openser and asterisk talk one to one.

18 years, 10 months

[Users] dbtable

by jammers yann

Can i have the role of each table in openser database ? ___________________________________________________________________________ Nouveau : téléphonez moins cher avec Yahoo! Messenger ! Découvez les tarifs exceptionnels pour appeler la France et l'international. Téléchargez sur http://fr.messenger.yahoo.com

18 years, 10 months

[Users] OpenSER TLS with Windows Messenger

by Cagri Koksal

Hi all, I'm trying to test openset TLS feature with windows messenger. I setup openser on Debian Linux and modified the openser.cfg and openssl.cnfas required by the TLS faq and docs at openser.org. When I try to sign in using windows messenger I got the following message from OpenSer: "tls-accept: Error in SSL:" At the same time windows messenger gives the following error messenger; "There was a problem verifying the certificate from the server ....." Here is an excerpt from my openser.cfg - disable_tls = 0 listen = tls:192.168.0.128:5061 tls_verify = 0 tls_require_certificate = 0 tls_method = TLSv1 ( I also tried SSLv23 ) tls_certificate = "/usr/local/etc/openser/tls/sipsrv_rootCA/sipsrv01/cert.pem" tls_private_key = "/usr/local/etc/openser/tls/sipsrv_rootCA/sipsrv01/privkey.pem" tls_ca_list = "/usr/local/etc/openser/tls/sipsrv_rootCA/sipsrv01/calist.pem" and an excerpt from my openssl.cnf dir = "/usr/local/etc/openser/tls/sipsrv_rootCA/demoCA" certs = $dir/certs crl_dir = $dir/crl database = $dir/index.txt new_certs_dir = $dir/newcerts certificate = $dir/cacert.pem serial = $dir/serial crl = $dir/crl.pem I also used the existing certificates that come with openser-tls package. It resulted the same. Any suggestion or guidance is appreciated, thanks. -Cagri Koksal

18 years, 10 months

← Newer
1
...
17
18
19
20
21
22
23
...
26
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users January 2006