sr-users October 2006

sr-users@lists.kamailio.org

189 participants
345 discussions

by Gaurav Kansal

Hello I am in the process of evaluating a SIP stack for IMS enhancements (for CSCF). I compared SIPx, SER and reciprocate stacks for CSCF development. SER: Pros: 1. Can run as registrar/proxy/redirect server 2. TLS support for Security 3. Support for NAT 4. Web based management interface 5. IPv6 support Cons: 1. GPL license Resiprocate: Pros: 1. Slightly less distributed architecture than SIPx 2. Can run as registrar/proxy/redirect server 3. TLS support for Security 4. Support for NAT 5. Web based management interface 6. IPv6 support 7. Maximum standards compliance Many IMS headers are supported in latest release 1.0 SIPx: Pros: 1. Complete SIP based IP-PBX solution 2. Distributed architecture 3. Can run as registrar/proxy/redirect server 4. TLS support for Security 5. Support for NAT 6. Web based management interface Cons: 1. Missing IPv6 support 2. Large footprint I have following queries: 1. Can somebody point out if anything out of above is not correct or if people can add more? 2. Which stack is more actively being used for IMS enhancements? 3. Are there any plans for near future SER release with IMS support (CSCF mainly)? Regards, Gaurav Kansal

18 years, 1 month

Re: [Users] Show active calls

by raviprakash sunkara

Thanks U... I think of it........ let me know if U know ....... On 10/12/06, ram <talk2ram(a)gmail.com> wrote: > > Hi > > just for info > > Location table to store register users > not for Active calls > > Ram > > > On 10/12/06, raviprakash sunkara <sunkara.raviprakash.feb14(a)gmail.com> > wrote: > > > > Hello Ram, > > Good morning.. > > > > What I seen from OpenSER. > > Location is maintaining the User record tempory only until its > > alive..... > > Active call look from openSER location table........... > > > > > > > > On 10/12/06, ram < talk2ram(a)gmail.com> wrote: > > > > > Hi > > > > > > i have installed openser 1.0.X with mysql support > > > > > > how can i see Active calls > > > > > > I saw the document > > > > > > "basic dialog support - new module features active call listing during > > > runtime " > > > > > > how can i do this, any one have examples > > > > > > ram > > > > > > _______________________________________________ > > > Users mailing list > > > Users(a)openser.org > > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > > > > > > > > > > -- > > Thanks and Regards > > Ravi Prakash Sunkara > > ravi.sunkara(a)hyperion-tech.com > > M:+91 9985077535 > > O:+91 40 23114549 > > F:+91 40 40208727 > > ravi.sunkara(a)hyperion-tech.com > > www.hyperion-tech.com > > > -- Thanks and Regards Ravi Prakash Sunkara ravi.sunkara(a)hyperion-tech.com M:+91 9985077535 O:+91 40 23114549 F:+91 40 40208727 ravi.sunkara(a)hyperion-tech.com www.hyperion-tech.com

18 years, 1 month

[Serusers] Mailing list search directly accessible from iptel.org

by Greger V. Teigre

Hi! You can now search the mailing lists archives directly from iptel.org: http://www.iptel.org/listsearch Does not give you much beyond not having to type in site:mail.iptel.org on Google, but useful for beginners and as a reminder: search before you ask! g-)

18 years, 1 month

[Serusers] How to see Active Calls

by ram

Hi all iam using old SER 0.8.12 with mysql how can check the , how many calls are active. Ram

18 years, 1 month

[Serusers] error IM. Please help!!

by Meidiana Ten

Hi there, I really need help to solve error on my SerWEB when I'm trying to send offline message using IM. I don't understand what the problem is..When I check serctl moni, it shows some errors. 2(6006) get_record: lookup(_sip._udp.pcr.ac.id, 33) failed 2(6006) sip_resolvehost: no SRV record found for pcr.ac.id, trying 'normal' lookup... 2(6006) ERROR: mk_proxy: could not resolve hostname: "pcr.ac.id" 2(6006) ERROR: uri2proxy: bad host name in URI <sip:feri@pcr.ac.id> 2(6006) ERROR: uri2sock: Can't create a dst proxy 2(6006) t_uac: no socket found 2(6006) ERROR: fifo_uac_error: Unresolvable destination (478/FIFO/UAC) 2(6006) **** done consume Please show me the explanation. Can MSILO module store voice message for offline users? If it can, what application I can use to leave voice message? Is there any alternative way to send voice message without using SerWEB? Thanx Meidiana --------------------------------- Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min.

18 years, 1 month

[Users] Show active calls

by ram

Hi i have installed openser 1.0.X with mysql support how can i see Active calls I saw the document "basic dialog support - new module features active call listing during runtime " how can i do this, any one have examples ram

18 years, 1 month

RE: [Serusers] presence handbook

by İlker Aktuna (Koç.net)

Hi, The following error states that the system time is not correct. So the source file has "modification time in the future" Warning: File `/root/sip_router/lib/cds/memory.h' has modification time 3.2e+06 s in the future Just check the system time and correct it. However I still couldn't find the problem with "presence_b2b" Can anyone help me ? (maybe I should write it with a different subject) Regards, ilker -----Original Message----- From: Kamal.Mann(a)t-systems.com [mailto:Kamal.Mann@t-systems.com] Sent: Wednesday, October 11, 2006 4:49 PM To: İlker Aktuna (Koç.net) Subject: RE: [Serusers] presence handbook Hi Will you please tell me how you resolved this error; even I also got the same. Thanks in anticipation Kamal Mann -----Original Message----- From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Ilker Aktuna (Koç.net) Sent: Wednesday, October 11, 2006 6:23 PM To: serusers(a)lists.iptel.org Subject: RE: [Serusers] presence handbook Hi, I have found the cause of the following problem. But this time I can't compile one of the required modules. Can anyone tell me how to solve this problem: ERROR: load_module: could not open module </usr/local/ser/lib/ser/modules/presence_b2b.so>: /usr/local/ser/lib/ser/modules/presence_b2b.so: undefined symbol: uri2sock Also, if there is a newer version of presence handbook, I would like to know where. Thanks, ilker -----Original Message----- From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of İlker Aktuna (Koç.net) Sent: Wednesday, October 11, 2006 11:54 AM To: serusers(a)lists.iptel.org Subject: [Serusers] presence handbook Hi Everyone, I have a running SER for 3-4 months. Now I will install it on a different server and I decided to install from new sources (CVS) However, when I use the presence handbook at following address: http://ftp.iptel.org/pub/ser/presence/presence-handbook/ar01s03.html I get into a never ending loop : (at step : make -f Makefile.ser install prefix=/base/ser/directory) make[1]: Leaving directory `/root/sip_router/lib/cds' make[1]: Entering directory `/root/sip_router/lib/cds' make[1]: Warning: File `/root/sip_router/lib/cds/memory.h' has modification time 3.2e+06 s in the future make[1]: Leaving directory `/root/sip_router/lib/cds' make[1]: Entering directory `/root/sip_router/lib/cds' make[1]: Warning: File `/root/sip_router/lib/cds/memory.h' has modification time 3.2e+06 s in the future make[1]: Leaving directory `/root/sip_router/lib/cds' make[1]: Entering directory `/root/sip_router/lib/cds' make[1]: Warning: File `/root/sip_router/lib/cds/memory.h' has modification time 3.2e+06 s in the future make[1]: Leaving directory `/root/sip_router/lib/cds' make[1]: Entering directory `/root/sip_router/lib/cds' make[1]: Warning: File `/root/sip_router/lib/cds/memory.h' has modification time 3.2e+06 s in the future Is the presence handbook updated ? Where is the newest version ? Thanks, ilker _

18 years, 1 month

[Serusers] downloading from ftp site of iptel.org

by Eddie Johnson Jr

Hello, I have been trying since yesterday to download the ser_0.9.6-0.1. tar.gz with the following command: wget ftp://iptel.org/pub/ser/0.9.6/packages/debian/ser_0.9.6.-0.1.tar.gz and I get connecting to iptel.org xxx.xxx.xxx.xxx: 21 . . .: Connection timed out Can anyone offer another site to download from line command this package. Regards, Ed

18 years, 1 month

[Users] changing the response code/message

by Ramin Dousti

Hi, I was wondering if I could, somehow, change the response message that I'm getting from the upstream to something else and pass it on to the client. Is it possible, and if so, how? Appreciate your input. -- Ramin

18 years, 1 month

Re: [Users] A Constant Username?

by Max Gregorian

You can replace the username on OpenSER to whatever you like using the UAC module. Perhaps you could extend this by also checking for the *67 in the number dialled (SIP URI or 'To' field). Hopefully that should solve the problem. On 10/7/06, Kelvin Williams <kelvin-lists(a)williamschadwell.com> wrote: > > Is there a constant Username that I could use within my openser.cfg? I > have several database lookups based upon the Username, however I have found > that if my user dials out using *67 his ATA replaces his username with > "anonymous" thereby making a good majority of my config useless. > > > > kw > > > > > > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > > >

18 years, 1 month

← Newer
1
...
19
20
21
22
23
24
25
...
35
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2006