Dear all
we have a server setup with 2 ethernets, we use mhome=1 and wanted to
send the message back to which ethernet it comes in, but doesn't seem to
work. Did we misunderstood the mhome command? or just a configuration
issue?
thanks
Ray
in this sentence what does version 7 speak of? version 7 of what?
" - if you're running version 7 or higher there is no need for the OS79XX.TXT file"
thanks jan in advance
aaron
________________________________
From: serusers-bounces(a)lists.iptel.org on behalf of Jiri Kuthan
Sent: Thu 4/13/2006 2:13 PM
To: Jan Bollen; Cesc
Cc: SER-Users
Subject: Re: [Serusers] cisco sip phones?
Hi Jan,
I am just curious -- what does it mean exactly it speaks SIP only under CCM5.0?
Thanks!
-jiri
At 15:40 12/04/2006, Jan Bollen wrote:
> Hi,
>
> Directly from Cisco or not, I'm also (ssshhttt) a SER user...:-)
>
> The list is correct with respect to SIP, but it depends on the call
>agent.
>
> 7905, 7912, 7940 and 7960 have a SIP firmware that can be installed
>and used independently from any other gear/software. Well, you need at
>least a TFTP server and possibly a SIP proxy/registrar/gateway to talk
>to.
>
> The others can run SIP when under control of CCM5.0. There is no
>"independent" SIP firmware for the 7941,7961,7970,7971. Yet.
>
> cheers,
> Jan
>
>
>
>On Wed, 12 Apr 2006 Cesc kneaded and moulded:
>
>|wow ... directly from cisco :)
>|
>|so, the list of 79xx phones which can be upgraded to sip is correct?
>|>>7905, 7911, 7912, 7940, 7941, 7960, 7961, 7970 and 7971
>|
>|Tks!
>|
>|Cesc
>|
>|On 4/12/06, Jan Bollen <jbollen(a)cisco.com> wrote:
>|>
>|>
>|>
>|> On Wed, 12 Apr 2006 Gould, Aaron kneaded and moulded:
>|> |
>|> |oh, cisco phone, ummm, yeah i put the 5 files in a tftp server i think it was ...
>|> |
>|> |OS79XX
>|> |P003-08-2-00.bin
>|> |P003-08-2-00.sbn
>|> |P003-08-2-00.loads
>|> |P003-08-2-00.sb2
>|>
>|> which is definitely not correct:
>|>
>|> - if you're running version 7 or higher there is no need for the
>|> OS79XX.TXT file
>|>
>|> - the .bin and .sbn are the unsigned and signed images containing the
>|> universal application loader.
>|>
>|> - the .loads and .sb2 files must be coded P0S3... and not P003.
>|>
>|> I know, it is confusing, but that is the way it is.
>|>
>|> cheers,
>|> Jan
>|>
>|>
>|> |
>|> |and it loaded up a new universal application loader into the phones....."...2000-2006"
>|> |
>|> |then they loaded their sip firmware ....blinky lights during upgrade.....now they boot up and go through a decision tree to find a valid config file which i haven't been able to figure out yet......
>|> |
>|> |aaron
>|> |
>|> |________________________________
>|> |
>|> |From: serusers-bounces(a)lists.iptel.org on behalf of Cesc
>|> |Sent: Wed 4/12/2006 6:07 AM
>|> |To: SER-Users
>|> |Subject: [Serusers] cisco sip phones?
>|> |
>|> |
>|> |
>|> |Hi,
>|> |
>|> |I am looking for experiences with cisco (series 79xx) phones with sip
>|> |... can it be installed (sip) on all of them? or just a few models
>|> |(7960 ... or 7970)?
>|> |
>|> |Tks!
>|> |
>|> |Cesc
>|> |
>|> |_______________________________________________
>|> |Serusers mailing list
>|> |serusers(a)lists.iptel.org
>|> |http://lists.iptel.org/mailman/listinfo/serusers
>|> |
>|> |
>|> |_______________________________________________
>|> |Serusers mailing list
>|> |serusers(a)lists.iptel.org
>|> |http://lists.iptel.org/mailman/listinfo/serusers
>|> |
>|>
>|
>
>_______________________________________________
>Serusers mailing list
>serusers(a)lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
--
Jiri Kuthan http://iptel.org/~jiri/
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
i just recently (last week) put sip firmware on a 7940G and 7960G. the are booting up with the word "SIP" at the top now. i haven't been able to get them to call each other yet. still working on that and getting my ser solaris 10 box working right. i had a few softphones calling eachother from what apeared to be via the ser box and also from what appeared to be direct ip to ip between the softphones, but i'm still unsure that the ser box was installed properly....and i'm frustrated because serweb wouldn't install properly .... that xxxphp file seemed to not want to be recognized as a package when i did pkgadd.....anyway, thanks for letting my cry on your shoulder....i;m sure it has everything to do with my lack of knowledge.....but we learn as we go don't we :)
oh, cisco phone, ummm, yeah i put the 5 files in a tftp server i think it was ...
OS79XX
P003-08-2-00.bin
P003-08-2-00.sbn
P003-08-2-00.loads
P003-08-2-00.sb2
and it loaded up a new universal application loader into the phones....."...2000-2006"
then they loaded their sip firmware ....blinky lights during upgrade.....now they boot up and go through a decision tree to find a valid config file which i haven't been able to figure out yet......
aaron
________________________________
From: serusers-bounces(a)lists.iptel.org on behalf of Cesc
Sent: Wed 4/12/2006 6:07 AM
To: SER-Users
Subject: [Serusers] cisco sip phones?
Hi,
I am looking for experiences with cisco (series 79xx) phones with sip
... can it be installed (sip) on all of them? or just a few models
(7960 ... or 7970)?
Tks!
Cesc
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Correction: the line in my error_log file says : Permission denied in Unknown on line 0. What permissions need to be specified?
>>> Karel Kozlik <karel(a)iptel.org> 04/17/06 10:40 AM >>>
> But while installing this classkit package
> # pear intall -f classkit
> again i am getting error
> " Unable to load dynamic library '/usr/lib/php4/classkit.so' -
> /usr/lib/php4/classkit.so: cannot open shared object file: No such file
> or directory in Unknown on line 0"
>
> I do not have classkit.so file in path usr/lib/php4/classkit.so' .
>
> Can anyone please suggest me what to do now?
Hi,
simply move the file to the correct location :-)
I am not sure where 'pear install' put the file. You have to find it.
Karel
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
I have been having this same problem for some time now and verified that the classkit.so file is in the folder specified in the php.ini. (/usr/lib/php/modules/classkit.so)
Is there anything else that might be happening?
>>> Karel Kozlik <karel(a)iptel.org> 04/17/06 10:40 AM >>>
> But while installing this classkit package
> # pear intall -f classkit
> again i am getting error
> " Unable to load dynamic library '/usr/lib/php4/classkit.so' -
> /usr/lib/php4/classkit.so: cannot open shared object file: No such file
> or directory in Unknown on line 0"
>
> I do not have classkit.so file in path usr/lib/php4/classkit.so' .
>
> Can anyone please suggest me what to do now?
Hi,
simply move the file to the correct location :-)
I am not sure where 'pear install' put the file. You have to find it.
Karel
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Hi everybody
Need help from some one.New in SER Configuration......
I did configur SER and now want to configure SERWEB.i
download and install it. i access "index.php" in
browser and it states username and password.I
subscribe user name and password but it gives the
message Bad usersname or password.
what would be the problem.?
regards
Jahangir
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Hi all,
i am trying to setup serweb but it is giving error
"Function aggregate_methods() doesn't exists. Try install Classkit
extension"
Then i downloaded <http://pecl.php.net/get/classkit-0.4.tgz>
classkit-0.4.tgz from the site http://pecl.php.net/package/classkit
<http://pecl.php.net/package/classkit>
But while installing this classkit package
# pear intall -f classkit
again i am getting error
" Unable to load dynamic library '/usr/lib/php4/classkit.so' -
/usr/lib/php4/classkit.so: cannot open shared object file: No such file or
directory in Unknown on line 0"
I do not have classkit.so file in path usr/lib/php4/classkit.so' .
Can anyone please suggest me what to do now?
Thanks,
Garima Mishra
Software Engineer
<http://www.openeratech.com/> <http://www.openeratech.com/>
<http://www.openeratech.com/>
Openera Technologies Pvt Ltd.
97, Block 5
Koramangala Indl. Estate
<?xml:namespace prefix = st1 ns =
"urn:schemas-microsoft-com:office:smarttags" />Bangalore - 560 095. India
Tel: +91 80 2552 1937
Fax: +91 80 2552 1164
<http://www.openeratech.com/> www.openeratech.com
E-mail: <mailto:garima@openeratech.com> garima(a)openeratech.com
This message (including any attachments) is a confidential and Privileged
communication to the intended addressee. If you are not the Intended
addressee, you have received this message in error. In that case, please
permanently delete this message and notify the sender so that we can avoid
this inconvenience in the future. Thank you.
So... I have a section of my ser.cfg that I use to handle call forwarding to
URIs on other SIP services or to the PSTN.
if(avp_db_load("$ruri/username","s:callfwd"))
{
avp_pushto("$ruri", "s:callfwd");
# Now set the timeout to 45 seconds (write the integer
# 45 to the avp inv_timeout (see the earlier modparam)
avp_write("i:45","inv_timeout");
route(1);
break;
};
The trick is, if I have this BELOW the proxy_authorize() portion of the
config, it works for forwards to URIs, but not to forwards for the PSTN (gives
me back an error saying it failed proxy authorisation.
Any idea why this would be the case? I've added the PSTN gateway to the
trusted table, and everything else seems to work okay except PSTN forwarding.
Is it because I let this rewrite the RURI and then let it run back through the
route again to get pushed onto the PSTN? Should I be splitting this up into a
callfwd that handles URIs and one that handles PSTN calls (if so, that will
get awfully confusing with the number of people who use e164-style usernames
for their users)?
I mean... it WORKS where it is. I'm just trying to understand what's happening
inside. :)
N.
hello, i'm aldi from indonesia.
i have problem in openserweb.where i can find openserweb source?
is serweb can be used in openser?
thank's
---------------------------------
How low will we go? Check out Yahoo! Messengers low PC-to-Phone call rates.
serusers，您好！
I want to add a parameter to the lookup function, such as lookup("location", 0), but the yypaser hints 'bad parameter', where am I action to add the pamameter. help.
致
礼！
tel:(20)85575010,85575013,85574559 - 277
mobile: 13631468080
http://www.glink.com.cn
metal
ghh(a)glink.com.cn
2006-04-17
