sr-users July 2006

sr-users@lists.kamailio.org

206 participants
414 discussions

[Users] t_on_failure doesn't
by Nathan Hawkins 22 Aug '06

22 Aug '06

I'm trying to use the LCR module to do a failover between two gateways. For testing purposes, I have a gateway record pointed at an IP that isn't used. The problem is, I can't seem to get OpenSER to fail over to the other gateway. I want to use TCP (with TLS when I'm done), but I get this: Jul 20 15:36:57 asiago /usr/sbin/openser[11896]: route[6]: routing to INVITE sip:MYDID@MYIPADDRESS:5060;transport=tcp Jul 20 15:37:17 asiago /usr/sbin/openser[11896]: ERROR: tcp_blocking_connect: timeout (10) Jul 20 15:37:17 asiago /usr/sbin/openser[11896]: ERROR: tcpconn_connect: tcp_blocking_connect failed Jul 20 15:37:17 asiago /usr/sbin/openser[11896]: ERROR: tcp_send: connect failed Jul 20 15:37:17 asiago /usr/sbin/openser[11896]: msg_send: ERROR: tcp_send failed Jul 20 15:37:17 asiago /usr/sbin/openser[11896]: ERROR:tm:t_forward_nonack: sending request failed (IP and username censored.) OpenSER sends this to the caller: SIP/2.0 477 Unfortunately error on sending to next hop occurred (477/TM) Why can't I catch this with either the return code from t_relay or the failure route? It will go to the failure route if I get a reply back from the next hop. But I need to fail to the other gateway. The relevent parts of the configs are shown below. (Addresses censored.) Any help would greatly appreciated. Thanks, ---Nathan Config snippet: # ok, so maybe try a gateway... if( load_gws() ) { xlog("L_INFO","route[3]: gateway routing $rm $ru"); t_on_failure("1"); route(6); return; } } route[6] { xlog("L_INFO","route[6]: $rm $ru"); t_on_failure("1"); t_on_reply("1"); if (!next_gw()) { xlog("L_INFO","route[6]: no more gateways for $ru"); exit; } xlog("L_INFO","route[6]: routing to $rm $ru"); if(!t_relay()) { xlog("L_INFO","route[6]: t_relay returned $rc"); sl_reply_error(); } return; } failure_route[1] { xlog("L_INFO","failure_route[1]: $rm $ru"); t_on_failure("1"); if(t_check_status("404")) { xlog("L_INFO","failure_route[1]: failing call with 404 for $ru"); return; } if (!next_gw()) { xlog("L_INFO","route[6]: no more gateways for $ru"); exit; } append_branch(); xlog("L_INFO","failure_route[1]: sending $rm $ru"); if(!t_relay()) { xlog("L_INFO","route[6]: t_relay returned $rc"); } return; } Gateways: mysql> select * from gw where grp_id=4; +---------+--------+-----------+------+------------+-----------+--------+ | gw_name | grp_id | ip_addr | port | uri_scheme | transport | prefix | +---------+--------+-----------+------+------------+-----------+--------+ | ithaka | 4 | CENSORED | 5060 | NULL | 2 | NULL | | larink | 4 | BAD_ADDRESS | 5060 | NULL | 2 | NULL | +---------+--------+-----------+------+------------+-----------+--------+ 2 rows in set (0.00 sec) ithaka is a working OpenSER proxy. larink is an empty IP address. (There used to be a server named larink.)

3 6

[Users] fail to listen on two addresses
by Jeremie Le Hen 22 Aug '06

22 Aug '06

Hi list, I am new two OpenSER. I installed OpenSER 1.1.0-notls and I need it to listen on both 127.0.0.1 and one of my physical interface's IP address. The manual page states: % -l address Listens on the specified address/interface. Multiple -l % mean listening on multiple addresses. The address format is % [proto:]address[:port], where proto = udp|tcp and address = % host|ip_address|interface_name. Example: -l localhost, -l % udp:127.0.0.1:5080, -l eth0:5062. The default behaviour is % to listen on all the ipv4 interfaces. I tried the following command-line, without success. I cannot connect to either one of the IP address I specified, depending on the order I provided them : % openser -u voipproxy -g voipproxy -l 84.xxx.xxx.xxx -l 127.0.0.1 -D -E And in another terminal: % # lsof -nPi4 -ap `pgrep -d, openser` % COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME % openser 30837 voipproxy 5u IPv4 60272 UDP 84.xxx.xxx.xxx:5060 % openser 30838 voipproxy 5u IPv4 60272 UDP 84.xxx.xxx.xxx:5060 % openser 30839 voipproxy 5u IPv4 60272 UDP 84.xxx.xxx.xxx:5060 If I turn the command-line to: % openser -u voipproxy -g voipproxy -l 127.0.0.1 -l 84.xxx.xxx.xxx -D -E I get: % # lsof -nPi4 -ap `pgrep -d, openser` % COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME % openser 30845 voipproxy 5u IPv4 60382 UDP 127.0.0.1:5060 % openser 30846 voipproxy 5u IPv4 60382 UDP 127.0.0.1:5060 % openser 30847 voipproxy 5u IPv4 60382 UDP 127.0.0.1:5060 Note that in both case I get: % Listening on % udp: 84.xxx.xxx.xxx [84.xxx.xxx.xxx]:5060 % udp: 127.0.0.1 [127.0.0.1]:5060 % tcp: 84.xxx.xxx.xxx [84.xxx.xxx.xxx]:5060 % tcp: 127.0.0.1 [127.0.0.1]:5060 Except the order change, following the command-line. I could have missed something and would be glad if someone pointed it out to me. Thank you. Regards, -- Jeremie Le Hen < jeremie at le-hen dot org >< ttz at chchile dot org >

2 2

[Users] Q:ABOUT:MODULE:UsrLoc
by Alejandro Sanchez 22 Aug '06

22 Aug '06

Hi everybody. I have the next enviroment. OpenSer 1.1.X MySQL 5.0 Linux Fedora 4 Architecture: We have 4 servers one of them work like a LoadBalancer (openser proxy dispatcher), behind of it are the others 2 servers (openser) that have the function to kept the sessions, register, etc... they have the parameter in dbmode to 3 for kept out the cache system and the last is the MySQL DB that share the 2 sip servers. The problem is that, when a phone register it the other server delete the register in table location like if it detect that the register expires. Anybody have an idea of this type of performence? Thank's advance.. --------------------------------- Do You Yahoo!? La mejor conexión a Internet y 2GB extra a tu correo por $100 al mes. http://net.yahoo.com.mx

2 1

[Users] auth_db and avps
by Andreas Granig 22 Aug '06

22 Aug '06

Hi, While authorizing a user, auth_db only loads additional AVPs on success. IMO it would also make sense to load them on failure, so you could easily check if it's a known user with wrong credentials or an unknown user. It would especially be useful for fetching the uuid of the user although authorization fails. Any comments? Andy

2 1

[Serusers] problem with acc module settings
by Andy Thomas 20 Aug '06

20 Aug '06

Hi, I cant start Ser 0.9.6 I get the following error when I start it up 0(4628) set_mod_param_regex: parameter <db_url> not found in module <acc> 0(4628) parse error (87,20-21): Can't set module parameter 0(4628) set_mod_param_regex: parameter <db_missed_flag> not found in module <acc> 0(4628) parse error (92,19-20): Can't set module parameter 0(4628) set_mod_param_regex: parameter <db_flag> not found in module <acc> 0(4628) parse error (93,19-20): Can't set module parameter ERROR: bad config file (3 errors) Here's my settings for the acc module - can anyone see whats wrong with it?? modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 2) modparam("acc", "log_fmt", "fimos") modparam("acc", "db_missed_flag", 2) modparam("acc", "db_flag", 1)

4 5

[Serusers] forwarded calls got timeout when called part hangup
by ashou han 10 Aug '06

10 Aug '06

Hi there, I use a t_on_failure("1") in route[1] for a unavailable server to another sip server, but always get timeout (code=408) when the called part hangup, no error (code=200) when calling part hangup. Please help!! here is my ser.cfg and log: ============================== # # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes #log_stderror=yes # (cmd line: -E) listen=127.0.0.1 /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "../usr/local/lib/ser/modules/mysql.so" #loadmodule "/usr/local/lib/ser/modules/postgres.so" loadmodule "/usr/local/lib/ser/modules/avpops.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" #loadmodule "/usr/local/lib/ser/modules/xlog.so" loadmodule "/usr/local/lib/ser/modules/acc.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- modparam("acc", "log_missed_flag", 2) modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "failed_transactions", 1) modparam("acc", "log_fmt", "miocfsdrtup") #modparam("acc", "db_flag", 3) #modparam("acc", "db_missed_flag", 4) #modparam("acc", "failed_transactions", 1) #modparam("acc", "db_url", "postgres://gatekeeper:mm1ch0t@localhost/ser") #modparam("acc", "log_extra" ,"ua=hdr/User-Agent") #modparam("acc", "db_extra" ,"uuid=avp/i:888; src_ip=avp/i:999") modparam("avpops", "avp_aliases", "c_uri=i:888; s_ip=i:999" ) # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # — tm params -- # set time for which ser will be waiting for a final response; # fr_inv_timer sets value for INVITE transactions, fr_timer # for all others modparam("tm", "fr_inv_timer", 15 ) modparam("tm", "fr_timer", 10 ) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; if (method=="INVITE" || method=="BYE" || method=="CANCEL"){ ## Accounting for all calls setflag(1); # setflag(2); }; if (method=="INVITE") { record_route(); } # write the source IP as avp "s_ip" for accounting purposes # avp_write( "$src_ip", "$s_ip"); if (loose_route() ) { log("------- LOOSE ROUTE"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); log("------- IF ROUTE"); #route(1); break; } else { # write the current RURI as avp "c_uri" for accounting purposes #avp_write( "$ruri", "$c_uri"); append_hf("P-hint: outbound alias\r\n"); log("------- ELSE ROUTE"); route(1); break; }; append_hf("P-hint: usrloc applied\r\n"); log("------- LAST ROUTE"); #route(1); setflag(4); break; } route[1] { if ((src_ip==192.168.0.199)) { if ((uri=~"^sip:1617.*@127\.0\.0\.1") or (uri=~"^sip:1508.*@127\.0\.0\.1")) { log(1, "----------- Forwarding to OUR GW\n"); rewritehost("192.168.0.201"); log("----------- Host rewrited\n"); setflag(1); # if we do not get a positive reply, continue at reply_route[1] t_on_failure("1"); }else if ((uri=~"^sip:1.*@127\.0\.0\.1")) { log("----------- Forwarding to GW\n"); rewritehost("192.168.0.100"); log("----------- Host rewrited\n"); setflag(1); }; t_relay(); break; } } failure_route[1] { if (t_check_status("487")) { break; }; # forwarding failed -- try again at another destination if (method=="INVITE" && t_check_status("403|408|500|503")) { # revert_uri(); log("----------- Next gateway\n"); rewritehost("192.168.0.100"); log("----------- Host rewrited\n"); append_branch(); setflag(1); t_relay(); } } ========================================= log: Jul 31 15:17:38 localhost /usr/local/sbin/ser[3468]: ACC: transaction answered: method=INVITE, i-uri=sip:16175552222@127.0.0.1:5060, o-uri=sip:16175552222@192.168.0.201:5060, call_id=C3ECE80-200011DB-9498E149-4F3DC2BB(a)199.232.41.199, from=<sip:192.168.0.199>;tag=318DE490-1872, code=200, totag=SDa3kv999-78f0001f-0-2058902615, fromtag=318DE490-1872, to=<sip:16175552222@127.0.0.1>;tag=SDa3kv999-78f0001f-0-2058902615, uid=n/a, userpart=16175552222 Jul 31 15:17:38 localhost /usr/local/sbin/ser[3463]: ACC: request acknowledged: method=ACK, i-uri=sip:127.0.0.1:5060;ftag=318DE490-1872;lr=on, o-uri=sip:16175552222@192.168.0.100:5060;endpoint=127.2.0.43;transport=udp, call_id=C3ECE80-200011DB-9498E149-4F3DC2BB(a)192.168.0.199, from=<sip:192.168.0.199>;tag=318DE490-1872, code=200, totag=SDa3kv999-78f0001f-0-2058902615, fromtag=318DE490-1872, to=<sip:16175552222@127.0.0.1>;tag=SDa3kv999-78f0001f-0-2058902615, uid=n/a, userpart=n/a Jul 31 15:18:13 localhost /usr/local/sbin/ser[3471]: ACC: transaction answered: method=BYE, i-uri=sip:127.0.0.1:5060;ftag=318DE490-1872;lr=on, o-uri=sip:16175552222@192.168.0.100:5060;endpoint=127.2.0.43;transport=udp, call_id=C3ECE80-200011DB-9498E149-4F3DC2BB(a)192.168.0.199, from=<sip:192.168.0.199>;tag=318DE490-1872, code=408, totag=SDa3kv999-78f0001f-0-2058902615, fromtag=318DE490-1872, to=<sip:16175552222@127.0.0.1>;tag=SDa3kv999-78f0001f-0-2058902615, uid=n/a, userpart=n/a

2 1

Re: [Serusers] Cisco like translation rules in SER.
by Jiri Kuthan 07 Aug '06

07 Aug '06

There is a buch of commands you can use for uri maniputlation: strip, prefix, subst_uri. -jiri At 15:52 25/07/2006, Robert Zorop wrote: >Hi guys. > I'd like to hear about different methods of implementing cisco like transtation rules in SER. I was thinking about AVPs, but still couldn't find the ight way. > Is someone is doing it inside or outside ser, please shed a light on this!. What i need is to stip some numbers, and then add some other (variables) before proxying the calls. > > >Thanks in advance. > >_______________________________________________ >Serusers mailing list >Serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

3 4

[Serusers] Routing users to other SIP server
by KaveH Aasaraai 03 Aug '06

03 Aug '06

Hi, I was wondering how I can route my SER users to other SIP servers, without need of authentication to other server. I mean this: My User -> Auth -> My SER My SER -> Auth -> Other SIP Server My User --------make call--------> My SER --------route call-------> Other SIP Server Thank you. Kaveh __________________________________ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com

4 5

[Users] OpenSER 1.1.0 Hangs on Startup
by Alexander, Louis 02 Aug '06

02 Aug '06

All, I have just installed the RPM, openser-1.1.0-rhel3.0.i386.rpm <http://openser.org/pub/openser/latest/packages/rhel-3.0/openser-1.1.0-r hel3.0.i386.rpm> , on my Linux box (Linux ... 2.4.21-4.EL #1 Fri Oct 3 18:13:58 EDT 2003 i686 i686 i386 GNU/Linux), and I am having some big problems on startup- Openser never seems to really finish starting. /var/log/messages shows: Jan 25 04:09:08 plat-proxy openser: 0(1567) init_tcp: using sigio_rt as the io watch method (auto detected) Jan 25 04:09:08 plat-proxy openser: 0(0) INFO: statistics manager successfully initialized Jan 25 04:09:08 plat-proxy openser: 0(0) StateLess module - initializing Jan 25 04:09:08 plat-proxy openser: 0(0) TM - initializing... Jan 25 04:09:08 plat-proxy openser: 0(0) Jan 25 04:09:08 plat-proxy openser: Maxfwd module- initializing Jan 25 04:09:08 plat-proxy openser: 0(0) TextOPS - initializing Jan 25 04:09:08 plat-proxy openser: 0(0) INFO: udp_init: SO_RCVBUF is initially 65535 Jan 25 04:09:08 plat-proxy openser: 0(0) INFO: udp_init: SO_RCVBUF is finally 131070 Jan 25 04:09:08 plat-proxy openser: 0(0) WARNING: using only the first listen address (no fork) Jan 25 04:09:08 plat-proxy openser: 2(1569) INFO: fifo process starting: 1569 Jan 25 04:09:08 plat-proxy openser: 2(1569) INFO:open_uac_fifo: fifo server up at /tmp/openser_fifo... Jan 25 04:09:12 plat-proxy openser: 2(1569) INFO: no fifo_db_url given - fifo DB commands disabled! And that's all. Did I miss a step? I cant find any references to db_url in my Config file, and I am using the default one (plus debug variables). Can anyone offer some help? Thanks! Louis This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you.

3 3

Re: [Users] How to add subscribers into OPENSER database(can not do it with openserctl)?
by Klaus Darilion 02 Aug '06

02 Aug '06

On Mon, July 31, 2006 22:14, Bill Zhang said: > Strange, I used to be able to use serctl to add subscribers, but with > openserctl, the choice are very limited, why? All those nice command line > options seem to be gone:-(. > openserctl was splitted into modules, and the functions to manipulate the DB are only installed if the DB packages are installed (mysql ...). Maybe there is a problem with this modularization. regards klaus > Best Regards, > Bill Zhang > > > > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users >

4 4

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users July 2006