sr-users August 2006

sr-users@lists.kamailio.org

184 participants
361 discussions

Re: [Users] rtpproxy or RTPProxy, where to download or checkout
by Klaus Darilion 23 Aug '06

23 Aug '06

Bill Zhang wrote: > This could be a simple question but I went through the whole user archive > and yet to find out where to download it or cvs checkout, I do see > mediaproxy as part of OPENSER module, wonder why rtpproxy or RTPProxy is > not:(. Hi Bill! There are 2 RTP proxies available. 1. Mediaproxy 2. rtpproxy To communicate with Mediaproxy, openser uses the mediaproxy module. To communicate with rtpproxy, openser uses the nathelper module. The modules are part of openser, but not the RTP proxies itself. You can download Mediaproxy from ag-projects: http://mediaproxy.ag-projects.com/ You can download rtpproxy from berlios cvs (which is insides ser's CVS repository) http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/rtpproxy/ cvs -d:pserver:anonymous@cvs.ser.berlios.de:/cvsroot/ser login press enter when prompted for a password cvs -z3 -d:pserver:anonymous@cvs.ser.berlios.de:/cvsroot/ser co rtpproxy then do the usual: ./configure; make; make install regards klaus > > Thanks in advance for help. > > Bill > > -----Original Message----- > From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf > Of Atle Samuelsen > Sent: Monday, August 14, 2006 12:56 PM > To: Ever Zalazar > Cc: users(a)openser.org > Subject: Re: [Users] mediaproxy vs. rtpproxy > > > Hi ever, > > I would say this is not a proper question. Both work like a charm with > (Open)SER. > > The question you should ask yourself is what do you want to accomplish > with mediaproxy/rtpproxy. If itÂ´s only calls between nated useragensts, > you can use both without any problem. > > - Atle > * Ever Zalazar <zalazar(a)technologymaker.com> [060814 21:41]: >> Hi people! Just to know, which is much better for openser mediaproxy or > rtpproxy? >> >> Best Regards >> >> >> Ever > >> _______________________________________________ >> Users mailing list >> Users(a)openser.org >> http://openser.org/cgi-bin/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users

1 0

[Users] Redirect
by Andrew And 23 Aug '06

23 Aug '06

I am using redirect with ENUM, and am I wanting to know if my code is correct, then I write the code below. Could someone help me please? . . . } else if (method=="INVITE") { # If Invite is to ENUM. # Block ENUM prefix("+"); enum_query("e164.arpa."); #Redirect sl_send_reply("300","Redirect"); return; };

2 1

Re: [Users] 403 Forbidden-----onsip configs testing. user not able to register
by Ferianto siregar 23 Aug '06

23 Aug '06

Hi, Ram its Not looking up in aliases table , it look ups only on location table. the each request and responses . So, You have to add your domain in the domain table by using : insert into domain values('urs_domain', ' date) ; in openser databases tables. I do hope it can help you. Thanks. On 8/22/06, ram wrote: > > Hi all > > iam trying to read the getting started document from onsip > when iam configuring pstn-gw.cfg > with the below config > > when the X-lite user try to loging , SIP/2.0 403 Forbidden, in the Log of > X-lite > > what is wrong , even i have changed AVP after reading module configs in > openser. > > any one suggest me what is wrong iam doing here > > Ram > > ----------------- > openser.cfg > # > # $Id: openser.cfg,v 1.6 2006/02/15 18:23:46 bogdan_iancu Exp $ > # > # simple quick-start config script > # > > # ----------- global configuration parameters ------------------------ > > debug=9 # debug level (cmd line: -dddddddddd) > fork=yes > log_stderror=no # (cmd line: -E) > > /* Uncomment these lines to enter debugging mode > #fork=no > #log_stderror=yes > */ > > check_via=no # (cmd. line: -v) > dns=no # (cmd. line: -r) > rev_dns=no # (cmd. line: -R) > listen=myip > port=5060 > children=4 > fifo="/tmp/openser_fifo" > fifo_db_url="mysql://openser:openserrw@localhost /openser" > > > # ------------------ module loading > ---------------------------------- > > > loadmodule "/usr/local/lib/openser/modules/mysql.so" > loadmodule "/usr/local/lib/openser/modules/sl.so" > loadmodule "/usr/local/lib/openser/modules/tm.so" > loadmodule "/usr/local/lib/openser/modules/rr.so" > loadmodule "/usr/local/lib/openser/modules/maxfwd.so" > loadmodule "/usr/local/lib/openser/modules/usrloc.so" > loadmodule "/usr/local/lib/openser/modules/registrar.so" > loadmodule "/usr/local/lib/openser/modules/textops.so" > loadmodule "/usr/local/lib/openser/modules/auth.so" > loadmodule "/usr/local/lib/openser/modules/auth_db.so" > loadmodule "/usr/local/lib/openser/modules/uri.so" > loadmodule "/usr/local/lib/openser/modules/uri_db.so" > loadmodule "/usr/local/lib/openser/modules/domain.so" > loadmodule "/usr/local/lib/openser/modules/mediaproxy.so" > loadmodule "/usr/local/lib/openser/modules/nathelper.so" > loadmodule "/usr/local/lib/openser/modules/avpops.so" > loadmodule "/usr/local/lib/openser/modules/permissions.so" > > modparam("auth_db|permissions|uri_db|usrloc","db_url", > "mysql://openser:openserrw@localhost/openser") > modparam("auth_db", "calculate_ha1", 1) > modparam("auth_db", "password_column", "password") > > modparam("nathelper", "rtpproxy_disable", 1) > modparam("nathelper", "natping_interval", 0) > > modparam("mediaproxy","natping_interval", 30) > modparam("mediaproxy","mediaproxy_socket", > "/var/run/mediaproxy.sock") > modparam("mediaproxy","sip_asymmetrics","/usr/local/etc/ser/sip-clients") > modparam("mediaproxy","rtp_asymmetrics","/usr/local/etc/ser/rtp-clients") > > modparam("usrloc", "db_mode", 2) > modparam("auth_db", "calculate_ha1", yes) > modparam("auth_db", "password_column", "password") > > modparam("registrar", "nat_flag", 6) > > modparam("rr", "enable_full_lr", 1) > > modparam("tm", "fr_timer_avp", "i:25") > modparam("tm", "fr_inv_timer_avp", "i:25") > > modparam("permissions", "db_mode", 1) > modparam("permissions", "trusted_table", "trusted") > > route { > > # > ----------------------------------------------------------------- > # Sanity Check Section > # > ----------------------------------------------------------------- > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483", "Too Many Hops"); > return; > }; > > if (msg:len > max_len) { > sl_send_reply("513", "Message Overflow"); > return; > }; > > # > ----------------------------------------------------------------- > # Record Route Section > # > ----------------------------------------------------------------- > if (method=="INVITE" && client_nat_test("3")) { > # INSERT YOUR IP ADDRESS HERE > > record_route_preset("myproxyip:5060;nat=yes"); > } else if (method!="REGISTER") { > record_route(); > }; > > # > ----------------------------------------------------------------- > # Call Tear Down Section > # > ----------------------------------------------------------------- > if (method=="BYE" || method=="CANCEL") { > end_media_session(); > }; > > # > ----------------------------------------------------------------- > # Loose Route Section > # > ----------------------------------------------------------------- > if (loose_route()) { > > if (has_totag() && (method=="INVITE" || method=="ACK")) { > > if > (client_nat_test("3")||search("^Route:.*;nat=yes")){ > setflag(6); > use_media_proxy(); > }; > }; > > route(1); > return; > }; > > # > ----------------------------------------------------------------- > # Call Type Processing Section > # > ----------------------------------------------------------------- > if (!is_uri_host_local()) { > if (is_from_local() || allow_trusted()) { > route(4); > route(1); > } else { > sl_send_reply("403", "Forbidden"); > }; > return; > }; > > if (method=="CANCEL") { > route(1); > return; > } else if (method=="INVITE") { > route(3); > return; > } else if (method=="REGISTER") { > route(2); > return; > }; > > lookup("aliases"); > if (uri!=myself) { > route(4); > route(1); > return; > }; > > if (!lookup("location")) { > sl_send_reply("404", "User Not Found"); > return; > }; > > route(1); > } > > route[1] { > > # > ----------------------------------------------------------------- > # Default Message Handler > # > ----------------------------------------------------------------- > > t_on_reply("1"); > > if (!t_relay()) { > > if (method=="INVITE" || method=="ACK") { > end_media_session(); > }; > > sl_reply_error(); > }; > } > > route[2] { > > # > ----------------------------------------------------------------- > # REGISTER Message Handler > # > ----------------------------------------------------------------- > > sl_send_reply("100", "Trying"); > > if (!search("^Contact:[ ]*\*") && client_nat_test("7")) { > setflag(6); > fix_nated_register(); > force_rport(); > }; > > if (!www_authorize("","subscriber")) { > www_challenge("","0"); > return; > }; > > if (!check_to()) { > sl_send_reply("401", "Unauthorized"); > return; > }; > > consume_credentials(); > > if (!save("location")) { > sl_reply_error(); > }; > } > > route[3] { > > # > ----------------------------------------------------------------- > # INVITE Message Handler > # > ----------------------------------------------------------------- > > if (!allow_trusted()) { > > if (!proxy_authorize("","subscriber")) { > proxy_challenge("","0"); > return; > } else if (!check_from()) { > sl_send_reply("403", "Use From=ID"); > return; > }; > > consume_credentials(); > }; > > if (client_nat_test("3")) { > setflag(7); > force_rport(); > fix_nated_contact(); > }; > > if (uri=~"^sip:1[0-9]{10}@") { > strip(1); > }; > > lookup("aliases"); > if (uri!=myself) { > route(4); > route(1); > return; === message truncated === --------------------------------- Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min.

1 0

[Users] Create 302 message and modify contact header
by Christophe Irles 23 Aug '06

23 Aug '06

Hi, I checked archive without any result... From an openSER rule, I want to create a 302 message if a specific RURI is used. First I need to change the contact header to specify the URI of the new callee. I tried something like that: avp_printf("$avp(s:100)", "sip:test@christophe.fr;target=$ruri;cause=486;"); avp_pushto("$ct", "$avp(s:100)"); # => error generated on this line ERROR:avpops:fixup_pushto_avp: unsupported destination "$ct"; expected $ru,$du,$br So how can I modify the contact header ? Just after the update on the contact header I envisaged to use this function sl_send_reply(302, "Moved Temporarily") Is it correct ? Is there a better way to 'create' 302 message in this case ? I check UAC_REDIRECT module but I don't think I can use it in this case or perhaps I missed something Before to use a 302 message I succesfully tested to create a new INVITE with the $ruri modified correctly. But I would like to create a 302 message to prevent any problem of authentication. Thanks, Christophe

4 7

RE: [Users] rtpproxy or RTPProxy, where to download or checkout--found it:). Re: Users Digest, Vol 15, Issue 61
by Mark Kent 23 Aug '06

23 Aug '06

>> RE: [Users] rtpproxy or RTPProxy, where to download or checkout--found it:) And no one else might have the same hesitation as you? (i.e., why not post the answer to your own question). This is actually semi-interesting, because if you go here http://ftp.iptel.org/pub/rtpproxy/ you get the impression that rtpproxy-0.3 is the one to get. There is a file there named: LATEST-IS-0.3 But here: http://www.voip-info.org/wiki-Portaone+rtpproxy it gives instructions for how to pull it out of CVS: * Download from CVS note: you should update rtpproxy from CVS in order for it to work: cvs -d:pserver:anonymous@cvs.ser.berlios.de:/cvsroot/ser login press enter when prompted for a password cvs -z3 -d:pserver:anonymous@cvs.ser.berlios.de:/cvsroot/ser co rtpproxy then do the usual: ./configure; make; make install and the code you get is different. Note that the output of "rtpproxy -v" has not changed (yet). So, the CVS version is still 0.3, but it looks like some obvious bug fixes as some arrays have had their dimensions increased by one, plus a couple of new minor features (-T ttl and -L nfiles). But wait, there's more: there is even a man page (rtpproxy.8)!! >> Anyone can explain following options: >> >> 1. -2fv >> 2. -s path >> 3. -L nfiles The man page is there in the distribution from CVS: -2 Send every RTP packet twice in sessions that use low-bitrate codecs. Only packets that are smaller than 128 bytes will be sent twice. This option can improve audio quality on lossy links. -f Rtpproxy will stay in foreground mode if this option is set. -v Show version of program. -s ctrl_socket This parameter configures rtpproxy control socket. The control [snip] -L does not appear to be documented, but looking at the code it sets this: RLIMIT_NOFILE The maximum number of open files for this process. I have other things to say about rtpproxy, but I'll save it for the next email... -mark

2 1

[Users] SMS module (SIP to GSM) question?
by ade darmawan 23 Aug '06

23 Aug '06

ade darmawan <generasi84(a)yahoo.com> wrote: Please help me mr... i have read this module...but i don't understand with 4 question : 1. I found that in the SMS Module (SIP to GSM) don't explained the software which used by the client/user agent or where we should to do testing in client? 2. I wanna know the other facilities should be used, beside openser-1.0.0.tar.gz,mysql,DNS? 3. For the final result, is this module could send SMS by 2 directions? 4. Could you please the step to do the testing? Thank's for all --------------------------------- Stay in the know. Pulse on the new Yahoo.com. Check it out. _______________________________________________ Devel mailing list Devel(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/devel --------------------------------- Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail.

1 0

[Users] 403 Forbidden-----onsip configs testing. user not able to register
by ram 23 Aug '06

23 Aug '06

Hi all iam trying to read the getting started document from onsip when iam configuring pstn-gw.cfg with the below config when the X-lite user try to loging , SIP/2.0 403 Forbidden, in the Log of X-lite what is wrong , even i have changed AVP after reading module configs in openser. any one suggest me what is wrong iam doing here Ram ----------------- openser.cfg # # $Id: openser.cfg,v 1.6 2006/02/15 18:23:46 bogdan_iancu Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=9 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=myip port=5060 children=4 fifo="/tmp/openser_fifo" fifo_db_url="mysql://openser:openserrw@localhost/openser" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" loadmodule "/usr/local/lib/openser/modules/uri.so" loadmodule "/usr/local/lib/openser/modules/uri_db.so" loadmodule "/usr/local/lib/openser/modules/domain.so" loadmodule "/usr/local/lib/openser/modules/mediaproxy.so" loadmodule "/usr/local/lib/openser/modules/nathelper.so" loadmodule "/usr/local/lib/openser/modules/avpops.so" loadmodule "/usr/local/lib/openser/modules/permissions.so" modparam("auth_db|permissions|uri_db|usrloc","db_url", " mysql://openser:openserrw@localhost/openser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 0) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics","/usr/local/etc/ser/sip-clients") modparam("mediaproxy","rtp_asymmetrics","/usr/local/etc/ser/rtp-clients") modparam("usrloc", "db_mode", 2) modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_timer_avp", "i:25") modparam("tm", "fr_inv_timer_avp", "i:25") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); return; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); return; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method=="INVITE" && client_nat_test("3")) { # INSERT YOUR IP ADDRESS HERE record_route_preset("myproxyip:5060;nat=yes"); } else if (method!="REGISTER") { record_route(); }; # ----------------------------------------------------------------- # Call Tear Down Section # ----------------------------------------------------------------- if (method=="BYE" || method=="CANCEL") { end_media_session(); }; # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if (has_totag() && (method=="INVITE" || method=="ACK")) { if (client_nat_test("3")||search("^Route:.*;nat=yes")){ setflag(6); use_media_proxy(); }; }; route(1); return; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (!is_uri_host_local()) { if (is_from_local() || allow_trusted()) { route(4); route(1); } else { sl_send_reply("403", "Forbidden"); }; return; }; if (method=="CANCEL") { route(1); return; } else if (method=="INVITE") { route(3); return; } else if (method=="REGISTER") { route(2); return; }; lookup("aliases"); if (uri!=myself) { route(4); route(1); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); return; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ----------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!search("^Contact:[ ]*\*") && client_nat_test("7")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("","subscriber")) { www_challenge("","0"); return; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); return; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!allow_trusted()) { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); return; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); return; }; consume_credentials(); }; if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; if (uri=~"^sip:1[0-9]{10}@") { strip(1); }; lookup("aliases"); if (uri!=myself) { route(4); route(1); return; }; if (uri=~"^sip:011[0-9]*@") { # International PSTN route(4); route(5); return; }; if (!lookup("location")) { if (uri=~"^sip:[0-9]{10}@") { # Domestic PSTN route(4); route(5); return; }; sl_send_reply("404", "User Not Found"); return; }; route(4); route(1); } route[4] { # ----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6) || isflagset(7)) { use_media_proxy(); }; } route[5] { # ----------------------------------------------------------------- # PSTN Handler # ----------------------------------------------------------------- rewritehost("mygateway:5060"); # INSERT YOUR PSTN GATEWAY IP ADDRESS # avp_write("i:45", "inv_timeout"); route(4); route(1); } onreply_route[1] { if ((isflagset(6) || isflagset(7)) && (status=~"(180)|(183)|2[0-9][0-9]")) { if (!search("^Content-Length:[ ]*0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; }

2 1

[Users] options for rtpproxy.
by Bill Zhang 23 Aug '06

23 Aug '06

Anyone can explain following options: 1. -2fv 2. -s path 3. -L nfiles The rest of them seems to be straight forward. This rtproxy documentation is HARD to find:(. usage: rtpproxy [-2fv] [-l addr1[/addr2]] [-6 addr1[/addr2]] [-s path] [-t tos] [-r rdir [-S sdir]] [-T ttl] [-L nfiles] Thanks in advance. Best Regards, Bill -----Original Message----- From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of Bill Zhang Sent: Tuesday, August 22, 2006 6:34 PM To: users(a)openser.org Subject: RE: [Users] rtpproxy or RTPProxy,where to download or checkout--found it:). Thanks. Best Regards, Bill -----Original Message----- From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of Bill Zhang Sent: Tuesday, August 22, 2006 5:55 PM To: users(a)openser.org Subject: [Users] rtpproxy or RTPProxy, where to download or checkout This could be a simple question but I went through the whole user archive and yet to find out where to download it or cvs checkout, I do see mediaproxy as part of OPENSER module, wonder why rtpproxy or RTPProxy is not:(. Thanks in advance for help. Bill -----Original Message----- From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of Atle Samuelsen Sent: Monday, August 14, 2006 12:56 PM To: Ever Zalazar Cc: users(a)openser.org Subject: Re: [Users] mediaproxy vs. rtpproxy Hi ever, I would say this is not a proper question. Both work like a charm with (Open)SER. The question you should ask yourself is what do you want to accomplish with mediaproxy/rtpproxy. If itÂ´s only calls between nated useragensts, you can use both without any problem. - Atle * Ever Zalazar <zalazar(a)technologymaker.com> [060814 21:41]: > Hi people! Just to know, which is much better for openser mediaproxy or rtpproxy? > > > Best Regards > > > Ever > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

1 0

RE: [Users] rtpproxy or RTPProxy, where to download or checkout--found it:).
by Bill Zhang 23 Aug '06

23 Aug '06

Thanks. Best Regards, Bill -----Original Message----- From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of Bill Zhang Sent: Tuesday, August 22, 2006 5:55 PM To: users(a)openser.org Subject: [Users] rtpproxy or RTPProxy, where to download or checkout This could be a simple question but I went through the whole user archive and yet to find out where to download it or cvs checkout, I do see mediaproxy as part of OPENSER module, wonder why rtpproxy or RTPProxy is not:(. Thanks in advance for help. Bill -----Original Message----- From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of Atle Samuelsen Sent: Monday, August 14, 2006 12:56 PM To: Ever Zalazar Cc: users(a)openser.org Subject: Re: [Users] mediaproxy vs. rtpproxy Hi ever, I would say this is not a proper question. Both work like a charm with (Open)SER. The question you should ask yourself is what do you want to accomplish with mediaproxy/rtpproxy. If itÂ´s only calls between nated useragensts, you can use both without any problem. - Atle * Ever Zalazar <zalazar(a)technologymaker.com> [060814 21:41]: > Hi people! Just to know, which is much better for openser mediaproxy or rtpproxy? > > > Best Regards > > > Ever > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

1 0

[Users] mediaproxy vs. rtpproxy
by Ever Zalazar 23 Aug '06

23 Aug '06

Hi people! Just to know, which is much better for openser mediaproxy or rtpproxy? Best Regards Ever

3 2

← Newer
1
...
11
12
13
14
15
16
17
...
37
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users August 2006