sr-users August 2006

sr-users@lists.kamailio.org

184 participants
361 discussions

FW: [Serusers] accounting for prefixed number
by Richard C. Thompson 03 Aug '06

03 Aug '06

Yes you can. We use prefix and strip to add and subtract prefixes before t_relay Rick -----Original Message----- From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Nhadie Sent: Wednesday, August 02, 2006 9:43 AM To: serusers(a)iptel.org Subject: [Serusers] accounting for prefixed number Hi All, I have a client using an asterisk server for them to use my sip proxy, what I did was add a trunk on their asteriks with a local extension from my SER sip proxy. Can I also just do a prefix ID for them instead of trunk? Meaning when they send me a call they should prefix it with e.g 1234# so I will identify that it came from that client, and how can I account that? TIA Regards Nhadie ________________________________________________ Message sent using UebiMiau 2.7 _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] SER local as an Asterisk Trunk
by Nhadie Ramos 03 Aug '06

03 Aug '06

Hi, Would just like to ask, I have an SER SIP Proxy and I setup an Asterisk, i used an SER local as a trunk for the Asterisk. When the Asterisk box register to SER it will have this URI sip:s@10.10.10.10, instead of sip:1001@10.10.10.10. Anyone has encountered this problem? Because I'm checking the From part, and "s" is not a valid extension number so it will deny it calling to the gateway. TIA Regards Nhadie

3 2

[Users] Errors when loading ACC
by Bruno Machado 03 Aug '06

03 Aug '06

Hi fellows Im trying to install Openser 1.0.1 in other server but it doenst running at all. It is the error: 0(24823) set_mod_param_regex: parameter <radius_config> not found in module <acc> 0(24823) parse error (130,19-20): Can't set module parameter 0(24823) set_mod_param_regex: parameter <service_type> not found in module <acc> 0(24823) parse error (131,20-21): Can't set module parameter 0(24823) set_mod_param_regex: parameter <radius_flag> not found in module <acc> 0(24823) parse error (132,19-20): Can't set module parameter 0(24823) set_mod_param_regex: parameter <radius_missed_flag> not found in module <acc> 0(24823) parse error (133,18-19): Can't set module parameter 0(24823) set_mod_param_regex: parameter <radius_extra> not found in module <acc> 0(24823) parse error (135,20-21): Can't set module parameter I already installed MySQL, RadiusClient and Radius and configured the config files from all of them. When I compiled the Openser, I needed to compile the modules "AUTH_RADIUS", "URI_RADIUS" and "MYSQL" manually. After "make install", I copied the 3 so files to "/usr/local/lib/openser/modules". The openser.cfg: . . . 123: modparam("acc", "failed_transaction_flag", 1) 124: #modparam("acc", "report_ack", 1) 125: modparam("acc", "log_level", 1) 126: modparam("acc", "report_cancels", 1) 127: modparam("acc", "log_flag", 1) 128: modparam("acc", "db_flag", 1) 129: modparam("acc", "db_missed_flag", 1) 130: modparam("acc", "radius_config","/usr/local/etc/radiusclient-ng/radiusclient.conf") 131: modparam("acc", "service_type", 15) 132: modparam("acc", "radius_flag", 1) 133: modparam("acc", "radius_missed_flag",2) 134: modparam("acc", "log_fmt","cdfimorstup") . . What im doing wrong? Thanks for your help. Bruno Machado --------------------------------- Yahoo! Search Música para ver e ouvir: You're Beautiful, do James Blunt

2 1

[Serusers] registered UA's
by Richard C. Thompson 03 Aug '06

03 Aug '06

Hi All I hope someone can help me figure this out. We've had a ser server running for quite some time now on a Dell 2850 with dual cpu's. The load is very low due to the use of multiple mediaproxy servers to handle the RTP streams. We have about 2300 UID in the mysql database but at any given time only about 1300 show as registered in the location table and we have customers complaining about not receiving calls. When tech support has a customer power cycle their ATA, it registers just fine and they start receiving calls. What could cause this? From the beginning, I noticed this was happening but didn't give it much thought as the number of UIDs was low. But now it is a growing problem. SER version is 0.9.0 Any hints or help would be appreciated. Rick

2 1

[Users] Two c= tag in sdp body
by Pletli Antal 03 Aug '06

03 Aug '06

Hello, I use OpenSer with Cisco AS5300/5350/5400 with IOS 12.3. When Cisco sends an OK 200 SIP message to OpenSer, there are two "c=IN IPV4" tags in sdp body with the same IP address. The nathelper module only replaces the last occurence of c= tag so some SIP clients works wrong because those get the first IP from the first "c=" tag... How can i replace the all occurences of "c=" tag in sdp body with the help of nathelper? Thx, Antal Content-Type: application/sdp. Content-Length: 277. . v=0. o=CiscoSystemsSIP-GW-UserAgent 7144 773 IN IP4 213.253.220.242. s=SIP Call. c=IN IP4 213.253.xxx.xxx. -> this is the original address of Cisco GW t=0 0. m=audio 35944 RTP/AVP 18. c=IN IP4 213.253.xxx.yyy. -> this is the nated address replaced by nathelper a=rtpmap:18 G729/8000. a=fmtp:18 annexb=no. m=video 35946 RTP/AVP. c=IN IP4 213.253.220.253. a=nortpproxy:yes.

2 1

[Users] siptrace doc inconsistency
by Andreas Granig 03 Aug '06

03 Aug '06

Hi, The docs of the siptrace module of v1.1.0,refer to the function "siptrace()", where in fact it is defined as "sip_trace()" in the source. Cheers, Andy

2 1

[Serusers] t_relay
by Victor Pascual Ávila 03 Aug '06

03 Aug '06

hi all, can a t_relay that got no answer be forwarded to a voicemail? The scenario is the following: i have a 'call group' sip-user (implemented in mysql database) that call t_relay when an INVITE is rcvd. As consequence of the t_relay the mentioned INVITE is forwarded to different destinations, and when one destination answers the call a CANCEL is sent to other destinations. The problem exists if no destination attends the call. How can I tell ser to forward the call to voicemail if no user belonging to group 'call group' answers the call? thanks!!! victor -- Victor Pascual Ávila mail: victor.pascual.avila(a)gmail.com sip: 17476374121(a)proxy01.sipphone.com linux user: 224443

1 0

[Serusers] Routing users to other SIP server
by KaveH Aasaraai 03 Aug '06

03 Aug '06

Hi, I was wondering how I can route my SER users to other SIP servers, without need of authentication to other server. I mean this: My User -> Auth -> My SER My SER -> Auth -> Other SIP Server My User --------make call--------> My SER --------route call-------> Other SIP Server Thank you. Kaveh __________________________________ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com

4 5

[Users] Troubles with avp and fr_inv_timer_avp
by Michel Zenone 03 Aug '06

03 Aug '06

Hi! Does somebody know why 'fr_inv_timer_avp' does nothing when I use it as follow: ... modparam("tm", "fr_inv_timer_avp", "inv_timeout") ... modparam("avpops","avp_table","avptimer") # 'avptimer' is like 'usr_preferences' ... avp_db_load("$ruri/username","i:inv_timeout/avptimer"); avp_write("i:inv_timeout","inv_timeout"); # In avptimer there is an attribute 'inv_timeout' Actually I try to set a fr_inv_timer different from an user to another. 'avptimer' timer defines, for each users, their proper fr_inv_timer. If somebody can help... Thanks in advance, Michel

2 1

[Serusers] Compile OpenSer
by Jose Gil Navarrete 03 Aug '06

03 Aug '06

Hi, Is it posible to compile openser on Hp-Ux?? Has somebody try this?? Would I need something special?? --------------------------------- Do You Yahoo!? La mejor conexión a Internet y 2GB extra a tu correo por $100 al mes. http://net.yahoo.com.mx

2 1

← Newer
1
...
30
31
32
33
34
35
36
37
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users August 2006