sr-users August 2006

sr-users@lists.kamailio.org

184 participants
360 discussions

[Users] openSER and SEMS: pb with voicemail when phone is busy or on no answer

by Christophe Irles

Hi, I want to have voicemail feature when phone is busy or on no answer My configuration file is like that: .. # route block used only to have voicemail if phone is busy or on no answer route[6] { append_branch(); avp_db_load("$ruri", "$avp(email)/$email_scheme"); if(!t_write_unix("/tmp/sems_socket", "voicemail/voicemail_headers")) { t_reply("500", "error contacting sems"); return; } route(5); route(4); route(1); } failure_route[1] { # flagset 26 <=> if phone busy we want a voicemail if ( (isflagset(26)) && (t_check_status("486")) ) { resetflag(26); route(6); return; } # flagset 27 <=> on no answer we want a voicemail if ( (isflagset(27)) && (t_check_status("408")) ){ resetflag(27); route(6); return; } end_media_session(); } Now if I use a "default.template" (used by the voicemail module) with the line: from:voicemail@%domain%, SEMS cannot send correctly a email: (3988) INFO: connect (AmSmtpClient.cpp:96): 127.0.0.1 welcomes us (3988) DEBUG: send_line (AmSmtpClient.cpp:173): SENDED: HELO 127.0.0.1 (3988) DEBUG: read_line (AmSmtpClient.cpp:145): RECEIVED: 250 christophe.rv.fr (3988) DEBUG: run (AmMail.cpp:119): Mail deamon starting its work (3988) DEBUG: send_line (AmSmtpClient.cpp:173): SENDED: mail from: <voicemail(a)172.20.250.1> (3988) DEBUG: read_line (AmSmtpClient.cpp:145): RECEIVED: 501 Bad address syntax SEMS is trying to send a mail from "voicemail(a)172.20.250.1" ! The SMTP server doesn't accept an IP and this IP is the IP of the callee SIP device . Strange. It's important to notice that "voicemail" works fine when is used on a phone not registered with the line "from:voicemail@%domain%" in file "default.template" . In this case the SEMS log file is: (4494) INFO: connect (AmSmtpClient.cpp:96): 127.0.0.1 welcomes us (4494) DEBUG: send_line (AmSmtpClient.cpp:173): SENDED: HELO 127.0.0.1 (4494) DEBUG: read_line (AmSmtpClient.cpp:145): RECEIVED: 250 christophe.rv.fr (4494) DEBUG: run (AmMail.cpp:119): Mail deamon starting its work (4494) DEBUG: send_line (AmSmtpClient.cpp:173): SENDED: mail from: <voicemail(a)christophe.rv.fr> (4494) DEBUG: read_line (AmSmtpClient.cpp:145): RECEIVED: 250 Ok So I suspect the "%domain%" in "default.template" file is not correctly read by the module "voicemail" after a "failure_route" or after a "append_branch". What I must change in my OpenSER configuration file in order to resolve this problem ? NOTE: I'm using sems-0.1.1 in revision 68 Thanks in advance, Christophe

18 years

[Users] Sample config

by Pavel D. Kuzin

Hello! Can anyone provide sample config to proxy any calls. Thank you. -- Pavel D.Kuzin System Administrator Nodex ISP St. Petersburg, Russia pk(a)nodex.ru http://nodex.ru

18 years

[Users] SMS Module (SIP to GSM)

by ade darmawan

Hi all, please help me.... Nowadays, i've been trying to implemented the SMS Module (SIP to GSM) using OpenSER 1.0.0, but never the lles, the tutorials that had given at www.openser.org are so poor... Could you please help me to find more added tutorial guide to implemented the SMS Module (SIP to GSM) ? I wanna know, what kind of facilities that needed to build this module and make it run correctly (such as DNS,etc), step by step to build this module? i hope your opinion? --------------------------------- Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less.

18 years

[Serusers] Is there a function for lookup contents in a given column of the subscriber table?

by Ricardo Carvalho

Hi, Is there any Ser function for lookup contents in a given column of the subscriber table, like the *is_user_in* function that looks up in group table? Thanks, Ricardo.

18 years

[Users] default behaviour

by Mark Kent

As an educational tool, I'm trying to write a pure proxy using openser. This proxy doesn't have users or domains or gateways, it just shuffles messages that happen to land on it. I'm starting with REGISTER where I have simply this: t_on_reply("10"); t_on_failure("10"); t_relay(); The onreply and onfailure callbacks just log stuff. The openser cookbook says: The implicit action after execution of the main route block is to drop the SIP request. To send a reply or forward the request, explicit actions must be called inside the route block. To find what happens in other route blocks (onreply, etc.), I searched the cookbook for "implicit" and learned: implicit action for branch_route is to forward the request. implicit action for onreply_route is to send the reply upstream according to Via header And that's all there is. Is there more written somewhere else? What I noticed is that informational responses (1xx) are not relayed by openser, but Final (200) or Client Error (401) are relayed. Is this conclusion correct? This implicit behaviour seems a little odd to me; I would think that if I've got a t_on_reply out there then I'm saying "Hey, I'll handle it" but in fact I cannot handle it (t_relay is not allowed in an onreply block). So, I must be missing something in my understanding... I'ld appreciate it if someone could clarify for me. Thanks, -mark

18 years

[Users] How do I only INVITE if I am registered?

by Mahesh Paolini-Subramanya

Consider the case where there are two fones, both registered as the same subscriber (foo(a)bar.com) I have max_contacts == 2, therefore the fones actually register I now add a *third* fone, also registered as foo(a)bar.com Since max_contacts == 2, this fone does *not* register. However, if a user makes a call from this fone, the call will go through. I wish to prevent this. What do I do? Something obvious that I am missing? Or something weird with twiddling with the RURI and using "registered(domain)"? Or heavy AVP mucking around? Cheers -- ******************************************* Mahesh Paolini-Subramanya (703) 386-1500 x9100 CTO mahesh(a)aptela.com Aptela, Inc. http://www.aptela.com "Aptela: How Business Answers The Call" *******************************************

18 years

RE: [Users] Rewriting Contact HF port

by Justin Pearce

Thanks, Now that I understand what the received avp is for in the registrar module, that seems to make a lot more sense. I was unaware at the time how to go about doing that, and with the small number of replies I got, the only logical conclusion was to modify some functions that performed similarly that I knew worked 100% (all this because of a deadline). The information is helpful, since I will likely have to use it in a future implementation. Justin Pearce Information Technology/Programming Price Video Productions JustinP(a)PriceVideo.com 361-572-3810 800-733-3810 Fax: 361-572-3894 www.PriceVideo.com -----Original Message----- From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Sent: Monday, August 21, 2006 9:04 AM To: Justin Pearce Cc: users(a)openser.org Subject: Re: [Users] Rewriting Contact HF port Justin, just as an idea, you could upload the contact into an AVP (via pseudo variables) and then use a regexp to change the port part....so, you can do it only via script functions. regards, bogdan Justin Pearce wrote: >Hi Bogdan, > >I knew that Nathelper did some rewriting, but the circumstances required >that the thing record the private IP and a certain known port instead of >the public IP as a contact address (using fix_nated_register() to save >the other address). I wound up borrowing the code from the Nathelper >module and modifying it to accept a port argument and made it a separate >module. This way, it only rewrote the port and not left everything else >untouched. > >Thanks. > >Justin Pearce >Information Technology/Programming >Price Video Productions >JustinP(a)PriceVideo.com >361-572-3810 >800-733-3810 >Fax: 361-572-3894 >www.PriceVideo.com > >-----Original Message----- >From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] >Sent: Monday, August 21, 2006 6:19 AM >To: Justin Pearce >Cc: Klaus Darilion; users(a)openser.org >Subject: Re: [Users] Rewriting Contact HF port > >Hi Justin, > >if you need save(location) to save as "received" a custom uri, you just >need to set an avp with the uri you need to be saved. See: > http://openser.org/docs/modules/1.1.x/registrar.html#AEN211 >It's exactly what nathelper does. > >regards, >bogdan > >Justin Pearce wrote: > > > >>Thanks, Klaus >> >>It looks like I'll have to make something similar to the nathelper >>module to do what I need. >> >>Justin Pearce >> >>-----Original Message----- >>From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] >>Sent: Monday, August 07, 2006 1:43 AM >>To: Justin Pearce >>Cc: users(a)openser.org >>Subject: Re: [Users] Rewriting Contact HF port >> >>Justin Pearce wrote: >> >> >> >> >>>I am wondering if there is a good way to rewrite the port in the >>> >>> >>> >>> >>contact >> >> >> >> >>>header in OpenSER 1.0.1 >>> >>> >>> >>> >>1. Why do you want to rewrite the port to fixed port? NAT problems? >> >> >> >> >> >>>before it is stored in the location table?(I'm using the MySQL >>> >>> >>> >>> >>database >> >> >> >> >>>backend). >>> >>>Thus far, I am using "subst(/^(Contact.+):[0-9]+(.+)$/\1:5060\2/ig);" >>>just before I do >>> >>>"save("location");", but that does not seem to be working. >>> >>> >>> >>> >>subst will be applied before the message is forwarded. Thus, save() >> >> >sees > > >>the original Contact header. You either loop the modified message to >> >> >the > > >>SIP proxy again or you write your own function (similar to the function >> >> > > > >>in nathelper module) >> >>regards >>klaus >> >> >> >> >> >>>Suggestions? >>> >>> >>> >>>Justin Pearce >>> >>>Information Technology/Programming >>> >>>Price Video Productions >>> >>>JustinP(a)PriceVideo.com <mailto:JustinP@PriceVideo.com> >>> >>>361-572-3810 >>> >>>800-733-3810 >>> >>>Fax: 361-572-3894 >>> >>>www.PriceVideo.com >>> >>> >>> >>> >>> >>> >>> >>> >>> >>---------------------------------------------------------------------- - >> >> >- > > >> >> >> >> >>>_______________________________________________ >>>Users mailing list >>>Users(a)openser.org >>>http://openser.org/cgi-bin/mailman/listinfo/users >>> >>> >>> >>> >>_______________________________________________ >>Users mailing list >>Users(a)openser.org >>http://openser.org/cgi-bin/mailman/listinfo/users >> >> >> >> >> > > >

18 years

Re: [Users] OpenSER administrator issue

by Mike Williams

I don't think I'm using them, unless there's a bug in Kmail. Mike On Friday 11 August 2006 01:14, Louis Alexander wrote: > Btw, all emails I'm getting on this thread are blank. Are you guys using > PGP signatures? I think my outlook has an issue with that > > > > _____ > > From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On > Behalf Of Mike Williams > Sent: Friday, August 11, 2006 12:35 PM > To: users(a)openser.org > Subject: Re: [Users] OpenSER administrator issue > > > > > > > > This e-mail and any attachment is for authorised use by the intended > recipient(s) only. It may contain proprietary material, confidential > information and/or be subject to legal privilege. It should not be copied, > disclosed to, retained or used by, any other party. If you are not an > intended recipient then please promptly delete this e-mail and any > attachment and all copies and inform the sender. Thank you.

18 years

[Serusers] SER TCP Bug

by Curt Moore

Hello all. I've been doing some experimentation with both CVS HEAD and 0.9.6 of SER and version 1.1.0 of OpenSER. It appears that there is a TCP bug in SER which has been fixed in OpenSER. I've seen various posts in the past on the serdev and the serusers lists regarding this issue but with no definitive solution. Are there any plans to merge some of the great work of the OpenSER developers back into SER, such as this fix for TCP? Below is the logfile I receive when I try to place a call from a UDP to a TCP device using CVS HEAD of SER. The same routing logic in ser.cfg works perfectly in openser.cfg. Aug 17 19:03:33 testbox /usr/sbin/ser[32534]: ERROR: tcp_blocking_connect: poll error: flags 18 Aug 17 19:03:33 testbox /usr/sbin/ser[32534]: ERROR: tcp_blocking_connect: SO_ERROR (113) No route to host Aug 17 19:03:33 testbox /usr/sbin/ser[32534]: ERROR: tcpconn_connect: tcp_blocking_connect failed Aug 17 19:03:33 testbox /usr/sbin/ser[32534]: ERROR: tcp_send: connect failed Aug 17 19:03:33 testbox /usr/sbin/ser[32534]: msg_send: ERROR: tcp_send failed Aug 17 19:03:33 testbox /usr/sbin/ser[32534]: ERROR: t_forward_nonack: sending request failed Aug 17 19:03:33 sg1test /usr/sbin/ser[32534]: ERROR: sl_reply_error used: Unfortunately error on sending to next hop occurred (477/SL) Does anyone have any ideas on how to get this fixed in CVS HEAD of SER? I've tried some backporting of the changes to the tcp_* files from OpenSER to SER but have not had any luck as of yet as I'm not fully sure of how the code is supposed to be handling each case. This is to say that I'm just looking at code differences without really understanding how the code is supposed to work. I'm happy to do anything I can to help get this resolved in SER's CVS HEAD. Thanks! -Curt

18 years

[Users] Relay and Redirect

by Andrew And

I receive "Redirect" with more than one contact destination, and I need to do fork (parallel). I am using "t_relay()" to do this, but I didn´t see correct relay because, now, the Openser sent Invite only one destination. Is there another command to do relay? Could some one help me?

18 years

← Newer
1
...
14
15
16
17
18
19
20
...
36
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users August 2006