Hi,
I am having problems using OpenXCAP and somehow need to make it work. I
set it up on a RHEL 4 machine, and followed all the steps listed on the
openxcap installation page.
Now when I run the openxcap process, It shows that the process has started
and the twisted framework is listening on port 8000, but whenever I add a
contact on Eyebeam where remote storage is enabled to XCAP, I get a
message that Eyebeam could not add the contact due to failed
authentication. I have enabled Use SIP credentials in the storage settings
on XCAP.
My XCAP Root URi in the config file for OpenXCAP is
http://10.203.144.172/xcap-root/ while in Eyebeam it is
http://10.203.144.172:8000/xcap-root/.
There are no traces shown in syslog for OpenXCAP when it receives a
message. Is there anyway to get detailed traces for openXCAP. Also it may
be possible that Eyebeam supports only https,
but I do not wish to use https.
Any help would be greatly appreciated.
Thanks & Regards,
Kirti Dhingra
*********************** Aricent-Unclassified ***********************
"DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of
the individual to whom it is addressed. It may contain privileged or confidential information and should not be
circulated or used for any purpose other than for what it is intended. If you have received this message in error,
please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly
prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for
loss or damage arising from the use of the information transmitted by this email including damage from virus."
Hello,
in the following days will start the migration of openser.org site to a
new server. That might bring some outages of the web site and mailing
list -- I hope won't happen, but in case will do, please wait for a
while and try again. SVN and the rest hosted on sourceforge won't be
affected. This is a preliminary notification to propagate the info
better, beginning and ending of the transition will be marked on the
mailing list and web site.
Cheers,
Daniel
Do you have a " character on your first line?
Or is just your posting format?
Also, start openser with debug=9 and check the log output.
Regards,
Ovidiu Sas
On 10/25/07, Gregorio <goyo.villalba(a)dialcom.com> wrote:
>
>
>
>
> Hi all.
>
>
>
> I am installing svn HEAD version of openSer (at 10:24 am). I am finding
> strange errors.
>
> As I wrote before I could not create the data base (mysql) with the command
> create and the log was quite weird.
>
> Now, when I try to start openser I get this in the log:
>
>
>
> 'Oct 25 16:53:47 localhost openser: core:main: initialize the pseudo random
> generator from /dev/urandom
>
> Oct 25 16:53:47 localhost openser: core:yyerror: parse error (1,1-2): syntax
> error
>
> Oct 25 16:53:48 localhost openser: core:main: bad config file (1 errors)'
>
>
>
> 'openser.cfg' is in /usr/local/etc/openser/openser.cfg and
> I don't find anything wrong with it, apparently the line 1 is not wrong.
>
>
>
> Can somebody tell me what is wrong?
>
> Thanks in advance.
>
> Gregorio.
>
>
>
> Here is the file content:
>
>
>
> "
>
> #
>
> # $Id: openser.cfg 2825 2007-09-27 09:05:52Z henningw $
>
> #
>
> # simple quick-start config script
>
> # Please refer to the Core CookBook at
> http://www.openser.org/dokuwiki/doku.php
>
> # for a explanation of possible statements, functions and parameters.
>
> #
>
>
>
> # ----------- global configuration parameters ------------------------
>
>
>
> debug=3 # debug level (cmd line: -dddddddddd)
>
> fork=yes
>
> log_stderror=no # (cmd line: -E)
>
> children=4
>
>
>
> port=5060
>
>
>
> # Uncomment these lines to enter debugging mode
>
> #fork=no
>
> #log_stderror=yes
>
>
>
> # Uncomment this to prevent the blacklisting of temporary not available
> destinations
>
> #disable_dns_blacklist=yes
>
>
>
> # # Uncomment this to prevent the IPv6 lookup after v4 dns lookup failures
>
> #dns_try_ipv6=no
>
>
>
> # uncomment the following lines for TLS support
>
> #disable_tls = 0
>
> #listen = tls:your_IP:5061
>
> #tls_verify_server = 1
>
> #tls_verify_client = 1
>
> #tls_require_client_certificate = 0
>
> #tls_method = TLSv1
>
> #tls_certificate =
> "/usr/local/etc/openser/tls/user/user-cert.pem"
>
> #tls_private_key =
> "/usr/local/etc/openser/tls/user/user-privkey.pem"
>
> #tls_ca_list =
> "/usr/local/etc/openser/tls/user/user-calist.pem"
>
>
>
> # ------------------ module loading
> ----------------------------------
>
>
>
> #set module path
>
> mpath="/usr/local/lib/openser/modules/"
>
>
>
> # Uncomment this if you want to use SQL database
>
> #loadmodule "mysql.so"
>
>
>
> loadmodule "sl.so"
>
> loadmodule "tm.so"
>
> loadmodule "rr.so"
>
> loadmodule "maxfwd.so"
>
> …
>
> …
>
> …
>
> …"
> _______________________________________________
> Users mailing list
> Users(a)openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
>
Hi all.
I am installing svn HEAD version of openSer (at 10:24 am). I am finding
strange errors.
As I wrote before I could not create the data base (mysql) with the command
create and the log was quite weird.
Now, when I try to start openser I get this in the log:
'Oct 25 16:53:47 localhost openser: core:main: initialize the pseudo random
generator from /dev/urandom
Oct 25 16:53:47 localhost openser: core:yyerror: parse error (1,1-2): syntax
error
Oct 25 16:53:48 localhost openser: core:main: bad config file (1 errors)'
'openser.cfg' is in /usr/local/etc/openser/openser.cfg and I don't find
anything wrong with it, apparently the line 1 is not wrong.
Can somebody tell me what is wrong?
Thanks in advance.
Gregorio.
Here is the file content:
"
#
# $Id: openser.cfg 2825 2007-09-27 09:05:52Z henningw $
#
# simple quick-start config script
# Please refer to the Core CookBook at
http://www.openser.org/dokuwiki/doku.php
# for a explanation of possible statements, functions and parameters.
#
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
children=4
port=5060
# Uncomment these lines to enter debugging mode
#fork=no
#log_stderror=yes
# Uncomment this to prevent the blacklisting of temporary not available
destinations
#disable_dns_blacklist=yes
# # Uncomment this to prevent the IPv6 lookup after v4 dns lookup failures
#dns_try_ipv6=no
# uncomment the following lines for TLS support
#disable_tls = 0
#listen = tls:your_IP:5061
#tls_verify_server = 1
#tls_verify_client = 1
#tls_require_client_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem"
#tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem"
#tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem"
# ------------------ module loading ----------------------------------
#set module path
mpath="/usr/local/lib/openser/modules/"
# Uncomment this if you want to use SQL database
#loadmodule "mysql.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
.
.
.
."
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi
I updated today to openser 1.3 (HEAD) and got a problem with
radius_extra parameter of acc module.
openser config line is:
modparam("acc", "radius_extra", "Sip-Src-IP=$si; Sip-Src-Port=$sp;
Sip-User-ID=$fU; Sip-User-Realm=$fd; Sip-Req-URI=$ru")
console log delivered:
Oct 25 13:49:11 [23936] ERROR:acc:parse_acc_extra: parse failed in
<Sip-Src-IP=$si; Sip-Src-Port=$sp; Sip-User-ID=$fU; Sip-User-Realm=$fd;
Sip-Req-URI=$ru> around position 88
any ideas what the reason could be? openser 1.2 works fine with same config.
regards
helmut
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFHIIUc4tZeNddg3dwRAj4RAJ98aOYYDsWA5pFPfc7yhoQ/Gswt/gCeI2ZG
317jg0jKh0cUWvfc5F0VVkU=
=SG4V
-----END PGP SIGNATURE-----
Hi,
In this scenario:
User agents:
UA1-192.168.1.1
UA2-192.168.1.2
UA3-192.168.1.3
All register with internal proxy:
Openser-192.168.1.20 -> Nat-1.2.3.4 -> Termination server.
Openser contacts the terminating server using the UAC module.
On the internal Openser I record-route all calls to make sure the whole
dialog passes over the proxy to be able to do accounting.
However if I do:
record_route_preset("1.2.3.4:5060");
and 1.2.3.4 is a dynamic IP address it seems it will be tricky to keep the
record route updated.
Is the answer that I need not be doing a record-route at all, as all
packets will pass over the proxy anyway due to the UAC module, or is there
some way to use records-route-preset with dynamic ip addresses?
Thanks,
Richard
Hi All,
I am having problems in stopping the wesip server , I am not able restart it
again and it also gives problem when i try to stop it :
Log Message while trying to start
./startup.sh
Starting WESIP Application Server VozTelecom...
[root@localhost bin]# HttpConnector [main] - The [all:7080] has been
created
Exception during startup processing
java.lang.reflect.InvocationTargetException
at java.lang.reflect.Method.invoke(libgcj.so.7rh)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:156)
Caused by: java.lang.NoClassDefFoundError:
java.util.concurrent.ConcurrentHashMap
at com.voztele.sipservlet.connector.SipConnector.start(SipConnector.java
:202)
at org.apache.catalina.core.StandardService.start(StandardService.java
:454)
at org.apache.catalina.core.StandardServer.start(StandardServer.java
:2144)
at org.apache.catalina.startup.Catalina.start(Catalina.java:471)
at org.apache.catalina.startup.Catalina.execute(Catalina.java:358)
at org.apache.catalina.startup.Catalina.process(Catalina.java:129)
at java.lang.reflect.Method.invoke(libgcj.so.7rh)
...1 more
Starting WESIP Application Server VozTelecom...
[root@localhost bin]# HttpConnector [main] - The [all:7080] has been
created
Exception during startup processing
java.lang.reflect.InvocationTargetException
at java.lang.reflect.Method.invoke(libgcj.so.7rh)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:156)
Caused by: java.lang.NoClassDefFoundError:
java.util.concurrent.ConcurrentHashMap
at com.voztele.sipservlet.connector.SipConnector.start(SipConnector.java
:202)
at org.apache.catalina.core.StandardService.start(StandardService.java
:454)
at org.apache.catalina.core.StandardServer.start(StandardServer.java
:2144)
at org.apache.catalina.startup.Catalina.start(Catalina.java:471)
at org.apache.catalina.startup.Catalina.execute(Catalina.java:358)
at org.apache.catalina.startup.Catalina.process(Catalina.java:129)
at java.lang.reflect.Method.invoke(libgcj.so.7rh)
...1 more
Error log while stopping :
[root@localhost bin]# ./shutdown.sh
Stoping WESIP Application Server VozTelecom...
[root@localhost bin]# Catalina.stop: java.net.ConnectException: Connection
refused
java.net.ConnectException: Connection refused
at gnu.java.net.PlainSocketImpl.connect(libgcj.so.7rh)
at java.net.Socket.connect(libgcj.so.7rh)
at java.net.Socket.connect(libgcj.so.7rh)
at java.net.Socket.<init>(libgcj.so.7rh)
at java.net.Socket.<init>(libgcj.so.7rh)
at org.apache.catalina.startup.Catalina.stop(Catalina.java:540)
at org.apache.catalina.startup.Catalina.execute(Catalina.java:360)
at org.apache.catalina.startup.Catalina.process(Catalina.java:129)
at java.lang.reflect.Method.invoke(libgcj.so.7rh)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:156)
Please Help
--
Thanks
Saurabh Agarwal
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
I got a further problem with openser 1.3 update.
Config line is (got it from README file in xlog module dir):
xdbg("time $Cbx[$Tf]$Cxx method <$rm> r-uri <$ru>\n");
Console output is:
Oct 25 14:13:48 [24777] ERROR:core:pv_parse_spec: error searching pvar "Cbx"
Oct 25 14:13:48 [24777] ERROR:core:pv_parse_spec: wrong char [x/120] in
[$Cbx[$Tf]$Cxx method <$rm> r-uri <$ru>
] at [3 (0)]
Oct 25 14:13:48 [24777] ERROR:xlog:xdbg_fixup: ERROR: wrong format[time
$Cbx[$Tf]$Cxx method <$rm> r-uri <$ru>
]
Oct 25 14:13:48 [24777] ERROR:core:fix_actions: fixing failed (code=-1)
at cfg line 1486
Oct 25 14:13:48 [24777] ERROR:core:main: failed to fix configuration
with err code -1
again: openser 1.2 works with it.
regards
helmut
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFHIIjK4tZeNddg3dwRAm5WAKCrmtisBUTpGg3OiCg/+Tp+CFiUpgCggb/a
bu3YGYctF8GaeooWncLK1IA=
=iwD6
-----END PGP SIGNATURE-----
Hi.
I am trying to install HEAD svn version of OpenSer. After 'make install'
including some modules , I tried to create the Data Base with
'/usr/local/sbin/openserdbctl create'
But this is not working, that is the log:
: command not foundser/openserctl/openserdbctl.mysql: line 33:
'usr/local/lib/openser/openserctl/openserdbctl.mysql: line 57: syntax error
near unexpected token `
'usr/local/lib/openser/openserctl/openserdbctl.mysql: line 57: `prompt_pw()
/usr/local/sbin/openserdbctl: line 239: openser_create: command not found
I have read the script and I don't see anything wrong, It is strange because
I tried with former versions of OpenSer and I had no problem.
Anybody can help me?
Thanks.