sr-users June 2007

sr-users@lists.kamailio.org

191 participants
314 discussions

[Users] Re:snmpstats modules and net-snmp5.4

by zhaojunjie01＠st.lzu.edu.cn

I have solved this problem .Just install net-snmp 5.3.1 instead of 5.4.But when I use snmpget command it can't found oid.Can anyone give me some suggestion,Thank you! Best Regards

17 years, 5 months

[Serusers] ser/serweb multiple domains

by flavio

Hi all, I'm testing ser/serweb for multiple domains support. I've successfully configured serweb to manage my default domain (10.28.19.202, ip address for pc on which ser running) and edavoip (another test domain, configured through an Apache virtual hosting, on the same). So I try to register a UAC to edavoip ser domain: I've configure the same pc as DNS, in order to resolv edavoip with the right ip address (10.28.19.202). The risult is that REGISTER SIP message is sent properly to 10.28.19.202 but ser does not reply to message, as followed reported by ngrep lines: U 2007/06/07 15:28:22.913028 10.28.19.124:5060 -> 10.28.19.202:5060 REGISTER sip:edavoip SIP/2.0. Via: SIP/2.0/UDP 10.28.19.124;branch=z9hG4bK21175bf079b2b794. From: <sip:0192091221@edavoip>;tag=ec22721991ce1308. To: <sip:0192091221@edavoip>. Contact: <sip:0192091221@10.28.19.124>. Supported: replaces. Call-ID: b9ed1773b0c8ad7b(a)10.28.19.124. CSeq: 100 REGISTER. Expires: 3600. User-Agent: Grandstream BT110 1.0.8.12. Max-Forwards: 70. Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE. Content-Length: 0. U 2007/06/07 15:28:23.302718 10.28.19.202:5060 -> 10.28.19.202:5060 REGISTER sip:edavoip SIP/2.0. Via: SIP/2.0/UDP 10.28.19.202;branch=z9hG4bKc834.9dd67847.0. Via: SIP/2.0/UDP 10.28.19.124;branch=z9hG4bK353ff63bd2e31b1b. From: <sip:0192091221@edavoip>;tag=ec22721991ce1308. To: <sip:0192091221@edavoip>. Contact: <sip:0192091221@10.28.19.124>. Supported: replaces. Call-ID: ba27f6c1646bbb9d(a)10.28.19.124. CSeq: 100 REGISTER. Expires: 3600. User-Agent: Grandstream BT110 1.0.8.12. Max-Forwards: 16. Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE. Content-Length: 0. Any suggestion about this issue?? Thanks for support, Flavio -- ******************************** * (o< ing. Patria Flavio * //\ phone 0823451358 * V_/_ mobile 3407873357 * ********************************

17 years, 5 months

Re: [Serusers] [Serweb-users] OpenSER and SERWeb problems logging on (that old chestnut)

by flavio

May 29 11:49:19 *serweb* [error] file: /opt/*serweb*-0.9.6/html/data_layer.php:465: DB Error: connect failed - [nativecode=Access denied for user 'ser'@'localhost' (using password: YES)] ** mysql://ser:heslo@localhost/ser<http://www.voipuser.org/ship_to.php?url=mysql://ser:heslo@localhost/ser> Do you access mysql with mysql -u ser -p $>password: heslo ? If yes, try to start mysqld with --old-password option following tips at url: http://dev.mysql.com/doc/refman/5.0/en/old-client.html Bye, F. -- ******************************** * (o< ing. Patria Flavio * //\ phone 0823451358 * V_/_ mobile 3407873357 * ********************************

17 years, 5 months

[Serusers] @to.tag="" not detecting empty To tag?

by samuel

Hi folks, I am moving production to SER2 rc 2.0 and can not make @to.tag=="" to work. For example, in initial INVITEs: # if this is an initial INVITE (without a To-tag) we might try another # (forwarding or voicemail) target after receiving an error if (method=="INVITE" && @to.tag=="") { xlog("L_ERR","LXLOG: initial INVITE (no Totag) setting FAILURE_ROUTE"); t_on_failure("FAILURE_ROUTE"); } FAILURE_ROUTE is never called. While next check works (in the sense the failure route is processed). if (method=="INVITE") { xlog("L_ERR","LXLOG: INVITE setting FAILURE_ROUTE"); t_on_failure("FAILURE_ROUTE"); } So I am wondering whether @to.tag=="" works for empty To tag....can anyone confirm it? Thanks, Samuel.

17 years, 5 months

[Serusers] SERWEB.

by dciepiel＠orange.pl

Hi, I have problem with login operaton in SERWEB. Everything works fine in text interface so I decided to install web interface for easerly navigation. I have installed Serweb-0.9.4, also php4 and phpmyadmin. When I try to login at first time I recieved tree wornings from php: Warning: virtual() [function.virtual]: Unable to include '/www/htdocs/serweb/htmldomains/_default/prolog.html' - request execution failed in /www/htdocs/serweb/html/page.php on line 79 192.168.2.2 admin interface Warning: virtual() [function.virtual]: Unable to include '/www/htdocs/serweb/htmldomains/_default/separator.html' - request execution failed in /www/htdocs/serweb/html/page.php on line 81 Warning: virtual() [function.virtual]: Unable to include '/www/htdocs/serweb/htmldomains/_default/epilog.html' - request execution failed in /www/htdocs/serweb/html/page.php on line 104 However, login page open without any graphic elements but I am able to put user name and password. I have read that default login and password is admin/heslo. So I put them and recieved an information: "Bad username or password". If anybody could give me some guidelines how to remove those warnings and why I cannot login with default user name and password I will be appreciative. Thanks for any help. cheers, Daniel

17 years, 5 months

[Users] Problem in Load Balancing with 2 openSER proxies Server..

by raviprakash sunkara

Hi Users Am doing the Load-balance. I Have to 2 openser sip proxies Server with Different IP The Sip domain is napped the two ip's of the OPENSER Proxies This for failure and load-balancing of the SIP proxies When AM testing Two UAC's are Register in one the SIP proxy-A . When the call is Established , I Stop the First SIP proxy-A , and Stared the Second SipProxy-B , Call flow is fine for the UAC and UAS 's also but in Debug mode of second proxy-B is seen the Follow ing Error. ERROR: udp_send: sendto(sock,0x20b6bc,4,0,0xbfe13840,16): Bad file descriptor(9) 1(19010) ERROR: udp_send: sendto(sock,0x78e1d8,4,0,0xbfe13790,16): Bad file descriptor(9) 1(19010) ERROR:nathelper:nh_timer: udp udp_send failed 1(19010) ERROR: udp_send: sendto(sock,0x78e1d8,4,0,0xbfe13790,16): Bad file descriptor(9) 1(19010) ERROR:nathelper:nh_timer: udp udp_send failed PLease any one help me............ ! -- Thanks &Regards Ravi Prakash Sunkara

17 years, 5 months

[Serusers] REMINDER: Please vote on the technical board candidates before end of day Sunday, June 10!!

by Greger V. Teigre

Remember to vote before voting closes end of day Sunday, June 10!! You don't have to vote on five people, just write down (now!) the names of the people you want to see on the board and send to greger(a)iptel.org or one of the lists. The people you can choose from are: Raphael Coeffic (SEMS), Stefan Sayer (SEMS), Jan Janak, Andrei Pelinescu-Onciul, N. (Arcdiv.com), Martin Hoffmann, Greger Viken Teigre, Hendrik Scholz Feel free to also send an email to greger(a)iptel.org if you have any questions. g-) ---------------------- Voting on candidates for the technical board of iptel.org is now open and will be open until end of day Sunday, June 10. The rules governing the voting can be found at http://www.iptel.org/technicalboard/rules. A summary/howto can be found below. Where to send your vote =================== To make a public vote: send an email to one or more of the iptel.org lists seruser(a)iptel.rog, serdev(a)iptel.org, semsdev(a)iptel.org To make a secret vote: send an email to the coordinator at greger(a)iptel.org How to vote =========== The candidates can be found at http://www.iptel.org/nominations_and_voting_technical_board_2007. We have a total of eight candidates. Send an email with subject line "Vote: Technical Board" listing 1-5 people from the candidate list that you want on the iptel.org technical board. Each name listed in your email will give one vote to that person. Please note: * The board has an assigned seat for a SEMS representative and there are two candidates from SEMS (marked on the list of candidates). The SEMS seat will be assigned to the candidate with the highest number of votes counting only these two. * Two members of the board must have SER CVS write privileges (SER developer). Thus, the two candidates with such privileges having the highest number of votes will be elected. * The remaining three seat do not have any restrictions. Thus, once the SEMS and SER developer representatives have been elected, the remaining three candidates with the highest number of votes will be elected. * The number of votes for each candidate will be listed on http://www.iptel.org/nominations_and_voting_technical_board_2007 _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

17 years, 5 months

[Users] presence cfg example for trunk versions

by Toni Barata

Hi all Can someone send me an openser.cfg example with presence support for trunk version? Thanks in advance, Toni

17 years, 5 months

[Serusers] MySql Accounting

by KUMAR

Hi all, I am using SER 2.0 rc1. I am trying to make MySql accounting work. I have also attached my ser.cfg file. I don't see any error message while starting SER, but also, nothing is inserted in the acc table. Obviously, I am missing something. Is there some compile time option that i need to set to make this work. Please help me out. Thank you Kumar

17 years, 5 months

[Serusers] Vote: Technical Board

by flavio

My votes: Greger Viken Teigre Martin Hoffmann Stefan Sayer -- ******************************** * (o< ing. Patria Flavio * //\ phone 0823451358 * V_/_ mobile 3407873357 * ********************************

17 years, 5 months

← Newer
1
...
22
23
24
25
26
27
28
...
32
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users June 2007