sr-users June 2007

sr-users@lists.kamailio.org

191 participants
315 discussions

Re: [Serusers] How SER communicate to other SIP server
by roayu 28 Jun '07

28 Jun '07

Hi, Olaf! Is there any settings that I need to do on SER or ser.cfg? Thanks. Best Regards, Roa Yu -----Original Message----- From: Olaf Bergmann [mailto:Olaf.Bergmann@freenet-ag.de] Sent: Thursday, June 28, 2007 3:04 PM To: roayu Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] How SER communicate to other SIP server roayu wrote: > Hi, Olaf! > > Thanks for your reply. Could you please further explain on the connectivity > between those to DIFFERENT sip servers? If I wanna call using a softphone to > call from SER to SIPserver B, how should I make the call? In a typical scenario, you configure your softphone to use SER as outbound proxy (registrar, etc.) and let it route outgoing SIP requests according to its configuration. When calling foreign domains (i.e., the callee has a domain that is different from your softphone's), a simple t_relay would do. More elaborate routing policies could be based on numeric "dial plans" etc. to forward SIP requests according to your needs. Best regards, Olaf

2 1

[OpenSER-Users] Does SER/OpenSER has the ability to continue searching for other routes despite 4xx/5xx/6xx responses?
by Jason Ma 28 Jun '07

28 Jun '07

Hi all, Does SER/OpenSER has the ability to continue searching for other routes despite 4xx/5xx/6xx responses?

2 1

Re: [Serusers] How SER communicate to other SIP server
by roayu 28 Jun '07

28 Jun '07

Hi, Olaf! Thanks for your reply. Could you please further explain on the connectivity between those to DIFFERENT sip servers? If I wanna call using a softphone to call from SER to SIPserver B, how should I make the call? Thanks. Best Regards, Roa Yu -----Original Message----- From: Olaf Bergmann [mailto:Olaf.Bergmann@freenet-ag.de] Sent: Wednesday, June 27, 2007 3:10 PM To: roayu Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] How SER communicate to other SIP server roayu wrote: > I would like to find out is there anyway that the SER server can > communicate to other SIP servers? You could use SIP for this purpose. It has turned out to work pretty well since all SIP servers implement it by design ;-) > For instance, I have an account at SER > and another account at SIPserver B. I would like to call from SER to > SIPserver B, and vice versa. Is it workable? Or any additional devices > needed in between these 2 SIP servers? If yes, could anyone give me some > clues or guide to do so. You might want to have a look at the documents section at <http://iptel.org> , especially <http://www.iptel.org/ser/doc/gettingstarted>. HTH, Olaf

2 1

[Serusers] Floating point exception
by bozhang＠nec-labs.com 28 Jun '07

28 Jun '07

Hi, I download the ser software and I can compile it successfully on my machine with Fedora core 4. But when I tried to run it with the 'hello world ser.cfg' configuration file, it reports "Floating point exception" error message. Any body had similar error before? or any idea what is happening? I tried to copy the compiled binary to other machines with FC4 , all gave me the "Floating point exception" error. any input will be appreacited! -Bo

2 1

Re: [OpenSER-Users] About the opensip server.
by Henning Westerholt 28 Jun '07

28 Jun '07

On Mittwoch, 27. Juni 2007, gaoqiang.qian(a)nokia.com wrote: > Yes, I have the database in the msyql server by the openser_mysql.sh > create command, I can see it. > But I am not sure with the openser_mysql.sh create, is it enough for > adding those two users openserro and openserrw in the database? Normally this should be sufficient. But better check to be safe. Please reply also to the mailing list, that others can see your questions and the answers too. Henning

2 1

[OpenSER-Users] totally new
by Andres Paglayan 27 Jun '07

27 Jun '07

Hi, I did a little reading through the documentation at openser.org looking for something like a "tutorial" and couldn't find one, is there any kind of tutorial like resource available? Thanks, Andres Paglayan --"Harmony is more important than being right" Bapak

2 1

[OpenSER-Users] multiple NAPTR records in ENUM module
by Jonathan Creasy 27 Jun '07

27 Jun '07

Is there a way to have OpenSER try each NAPTR record when multiple are returned? 4.3.2.1.5.5.5.5.5.5.1.mysite.enum. 0 IN NAPTR 100 15 "u" "E2U+sip" "!^.*$!sip:+15555551234@server2" . 4.3.2.1.5.5.5.5.5.5.1.mysite.enum. 0 IN NAPTR 100 10 "u" "E2U+sip" "!^.*$!sip:+15555551234@server1" . 4.3.2.1.5.5.5.5.5.5.1.mysite.enum. 0 IN NAPTR 100 25 "u" "E2U+sip" "!^.*$!sip:+15555551234@server3" . That would route the calls to server1 (order 100, preference 10) but if server1 is not responding I would like it to move on and try server2. -Jonathan

2 7

[Users] Malformed CANCEL request from Asterisk possibly impacting OpenSER?
by David Coulthart 27 Jun '07

27 Jun '07

We are currently experiencing problems with our production OpenSER (1.1.0) environment where the load on the server is steadily increasing and the OpenSER response time increases drastically (e.g., 30+ seconds for an internal call to ring). Capturing the network traffic when this happens we have noticed that our Asterisk (1.2.10) voicemail server is sending malformed CANCEL requests to our OpenSER proxy. We are not certain whether this is a cause or an effect of the load problems on the OpenSER server. Here is the SIP data from the bad CANCEL request: Session Initiation Protocol Request-Line: CANCEL :u43974@128.59.59.215:5069 SIP/2.0 Method: CANCEL [Resent Packet: False] Message Header Via: SIP/2.0/UDP 128.59.59.215:5069;branch=z9hG4bK6734835b;rport Transport: UDP Sent-by Address: 128.59.59.215 Sent-by port: 5069 Branch: z9hG4bK6734835b RPort: rport Route: <sip:128.59.59.199;lr=on;ftag=4FC702F4-7F812557> From: <sip:43974@sip.columbia.edu;user=phone> SIP from address: sip:43974@sip.columbia.edu To: "Jim Rios" <sip:47891@sip.columbia.edu>;tag=4FC702F4-7F812557 SIP Display info: "Jim Rios" SIP to address: sip:47891@sip.columbia.edu SIP tag: 4FC702F4-7F812557 Contact: <sip:u43974@128.59.59.215:5069> Contact Binding: <sip:u43974@128.59.59.215:5069> URI: <sip:u43974@128.59.59.215:5069> SIP contact address: sip:u43974@128.59.59.215:5069 Call-ID: c9a0135b-41273fb6-f7b6cea9(a)160.39.14.100 CSeq: 101 CANCEL Sequence Number: 101 Method: CANCEL User-Agent: Asterisk PBX Max-Forwards: 70 Content-Length: 0 Accompanying this bad CANCEL request are the following error messages recorded by OpenSER to syslog when it attempts to process it: May 29 15:34:07 cocoa openser[892]: ERROR: parse_uri: bad uri, state 0 parsed: <:u43> (4) / <:u43974@128.59.59.215:5069> (26) May 29 15:34:07 cocoa openser[892]: ERROR: parse_sip_msg_uri: bad uri <:u43974@128.59.59.215:5069> May 29 15:34:07 cocoa openser[892]: xl_get_ruri: ERROR while parsing the R-URI May 29 15:34:08 cocoa openser[892]: c9a0135b-41273fb6-f7b6cea9(a)160.39.14.100: route[0] CANCEL r-uri <<null>> from <sip:43974@sip.columbia.edu;user=phone> to <sip:47891@sip.columbia.edu> May 29 15:34:08 cocoa openser[892]: ERROR: parse_uri: bad uri, state 0 parsed: <:u43> (4) / <:u43974@128.59.59.215:5069> (26) May 29 15:34:08 cocoa openser[892]: ERROR: parse_sip_msg_uri: bad uri <:u43974@128.59.59.215:5069> May 29 15:34:08 cocoa openser[892]: loose_route: Error while parsing Request URI May 29 15:34:08 cocoa openser[892]: ERROR: parse_uri: bad uri, state 0 parsed: <:u43> (4) / <:u43974@128.59.59.215:5069> (26) May 29 15:34:09 cocoa openser[892]: ERROR: parse_sip_msg_uri: bad uri <:u43974@128.59.59.215:5069> May 29 15:34:09 cocoa openser[892]: WARNING: do_action:error in expression May 29 15:34:09 cocoa openser[892]: ERROR: parse_uri: bad uri, state 0 parsed: <:u43> (4) / <:u43974@128.59.59.215:5069> (26) May 29 15:34:09 cocoa openser[892]: ERROR: parse_sip_msg_uri: bad uri <:u43974@128.59.59.215:5069> May 29 15:34:09 cocoa openser[892]: ERROR: parse_uri: bad uri, state 0 parsed: <:u43> (4) / <:u43974@128.59.59.215:5069> (26) May 29 15:34:10 cocoa openser[892]: ERROR: parse_sip_msg_uri: bad uri <:u43974@128.59.59.215:5069> May 29 15:34:10 cocoa openser[892]: ERROR: parse_uri: bad uri, state 0 parsed: <:u43> (4) / <:u43974@128.59.59.215:5069> (26) May 29 15:34:10 cocoa openser[892]: ERROR: parse_sip_msg_uri: bad uri <:u43974@128.59.59.215:5069> May 29 15:34:10 cocoa openser[892]: alias_db_lookup: Error while parsing Request-URI While the malformed packet is likely the fault of the Asterisk server (we see no packets from OpenSER to Asterisk with the sip protocol missing from the URI), we are wondering if OpenSER errors out in a bad way when it tries to process this packet, possibly entering into some sort of loop that is causing the load to go through the roof. It is also unclear to us why the Asterisk voicemail server would be responding with a cancel. In our packet capture we see no record of a request initiated by the Asterisk server that it would be sending a CANCEL for. Any insight that could be offered into this problem would be greatly appreciated. Thx, David Coulthart

3 5

Re: [OpenSER-Users] About the opensip server.
by Henning Westerholt 27 Jun '07

27 Jun '07

On Mittwoch, 27. Juni 2007, gaoqiang.qian(a)nokia.com wrote: > When I start the debug model, I have got some error of connecting mysql > database, it said something like > "mysql:openserro.openserro@localhost/openser" not found in the pool. > Could you tell me what could be the reason? > I can not find the achieves about this issues in the mail achieves. > Could you point out me some links? Hello Qiang, have you setup a mysql database and create the right tables with the database setup script? You find more informations about openser in the openser wiki on www.openser.org. If you want to use openser in a production environment, you should install a recent version, e.g. the latest stable release 1.2.1. Cheers, Henning

1 0

[OpenSER-Users] About the opensip server.
by gaoqiang.qian＠nokia.com 27 Jun '07

27 Jun '07

> Hi, > I am working in Nokia and now response for setup a openser sip server > providing sip proxy and registrar for one of our project. After I have > install the openser Sip server by following all the steps from CVS > installation guide. When I start the sip server with openser start > command, I always got: > 'openser' start: /etc/init.d/openser > Openser failed to start > Strating open sip router: > Listen on > Udp: > ... > Aliases: > Tcp: > ... > It seems the starting is failed. So could you tell me what could be > the reason? Or could you please tell me is there someway I can test if > my openser is running now? > Thanks. >

3 3

← Newer
1
2
3
4
5
6
7
8
9
...
32
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users June 2007