sr-users January 2008

sr-users@lists.kamailio.org

131 participants
218 discussions

Start a nNew thread

[OpenSER-Users] cdrtool datasources
by TCB 10 Jan '08

10 Jan '08

How do i create a datasource for Cisco RAS. -- TC

1 0

[OpenSER-Users] OpenSER & RADIUS accounting with radiusclient-ng
by Antun Mihalicek 10 Jan '08

10 Jan '08

Hi! I'm trying to enable RADIUS accounting on OpenSER with the use of radiusclient-ng, and using FreeRADIUS as radius server. When I initiate or terminate a session on OpenSER, following error occurs: Jan 10 12:21:58 [30155] ERROR:acc:acc_rad_request: radius-ing failed I've been googling for this issue, and I've found out that some people also had this error, but in their case RADIUS packet was sent to RADIUS server but was rejected , but in my case it wasn't even sent to the RADIUS server, as I saw from debug output on FreeRADIUS. As I've seen on forums, people said that this kind of error means that something's wrong with radiusclient-ng. I've used radiusclient-ng 0.5.5 & 0.5.6, both with same results. Did anyone had similar problem? Does radiusclient-ng have some kind of log or something? Thanks for your answer! openser.conf: #set module path mpath="/usr/local/lib/openser/modules/" /* uncomment next line for MySQL DB support */ #loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" loadmodule "uri_db.so" loadmodule "uri.so" loadmodule "xlog.so" loadmodule "acc.so" loadmodule "auth_radius.so" loadmodule "auth.so" loadmodule "group_radius.so" loadmodule "avp_radius.so" loadmodule "avpops.so" ..... # -- acc params -- modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 2) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 1) modparam("acc", "service_type", 15) #modparam("acc", "radius_extra", "Sip-Src-IP=$si;Sip-Src-Port=$sp") modparam("acc|auth_radius|group_radius|avp_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") # -- group_radius params -- modparam("group_radius", "use_domain", 1) ....

3 3

[OpenSER-Users] Parallel Forking
by Gomtesh Jain 10 Jan '08

10 Jan '08

Hi All, I am facing some problem in parallel forking . how should I handle the scenario where I get 200 ok response from both the branch . Gomtesh

2 3

[OpenSER-Users] Openxcap modification - setting config and runtime dir
by Tomasz Zieleniewski 10 Jan '08

10 Jan '08

Hi, I made a small modification in openxcap version 0.9.7 in file openxcap it enables now to specify the configuration directory and runtime directory. This is very useful when You run openxcap in deamon mode. xcap@venom:~/src/openxcap-0.9.7$ ./openxcap -h usage: openxcap [options] options: --version show program's version number and exit -h, --help show this help message and exit --no-fork run the process in the foreground (for debugging) --pid=File pid file (/var/run/openxcap/openxcap.pid) --conf-dir=Dir config directory (/etc/openxcap) --run-dir=Dir pid file (/var/run/openxcap) Cheers tomasz

1 0

[Serusers] alias as regular expression
by Sandrinho 09 Jan '08

09 Jan '08

Hi all. Is it possible to configure aliases as regular expressions? I mean: I have to manage some accounts on a SER: each account must receive calls on an arc of numbers. so i have an account "foo" with (for example) 200 aliases foo000,foo001,...,foo199. Is it possible to configure only one alias in form of regexp? "foo[01][0-9][0-9]" in this case I don't want to touch ser.cfg. Thanks a lot. Sandro.

1 0

Re: [OpenSER-Users] Carrirroute
by Henning Westerholt 09 Jan '08

09 Jan '08

On Wednesday 09 January 2008, TCB wrote: > Got it, you are right , This is set as the default for > rewrite_prefix_column in the > online manual( This might be a typo). > > Got it working 100% now , thanks > > modparam("carrierroute", "rewrite_prefix_column", "rewrite_host" Good. Yes, there is a typo in the documentation. I'll fix this. Cheers, Henning

1 0

[OpenSER-Users] uac_replace_from
by CSB 09 Jan '08

09 Jan '08

I wish to replace the from address in the following manner Received From: "05551233" sip:05551233@203.89.001.001 Replaced From: "5551233" sip:18585551233@203.89.001.001 In other words I want to do what the strip and prefix commands do but on a from header. Could anyone advise how this can be achieved in OpenSER 1.1? Regards Cameron

2 2

Re: [OpenSER-Users] Carrirroute
by Henning Westerholt 09 Jan '08

09 Jan '08

On Wednesday 09 January 2008, TCB wrote: > Thanks Henning , i have just realised i had not set the prob, > now the routing works but i'm afraid i have created another > problem. For some reason the ip address is being prefixed to the > called number. > See below. > > Jan 9 14:56:02 ss-za /usr/sbin/openser[20127]: > INFO:carrierroute:get_route_tree_by_id: searching in carrier default > Jan 9 14:56:02 ss-za /usr/sbin/openser[20127]: > DBG:carrierroute:get_route_tree_by_id: tree default, domain 0 : 0 > Jan 9 14:56:02 ss-za /usr/sbin/openser[20127]: DBG:core:hash_func: hash: > 2298 % 1000 = 298 > Jan 9 14:56:02 ss-za /usr/sbin/openser[20127]: > INFO:carrierroute:carrier_rewrite_msg: uri 0727785841 was rewritten to sip: > 196.15.164.13727785841(a)196.15.164.13 > > My carrierroute table looks like this: > > id | carrier | scan_prefix | domain | prob | strip | rewrite_host | rewrite_prefix | rewrite_suffix > ----+---------+-------------+--------+------+-------+---------------+----------------+---------------- > 2 | 0 | 072 | 0 | 1 | 1 | 19.1.164.13 | 27 | > 1 | 0 | 011 | 0 | 1 | 1 | 19.1.164.13 | 27 | Hi, your table is correct. I've seens this before, there was some user who copied the content of rewrite_host into rewrite_prefix, i think. Could you check if the RAM-cache on the module has also the correct data? (with 'openserctl fifo cr_dump_routes') Do you do other RURI rewriting before the route[22] where the cr method is called? Cheers, Henning

1 0

[Serusers] parallel forking
by Steven C. Blair 09 Jan '08

09 Jan '08

I seem to be running into problems using avps and parallel forking. Is it possible to insure the invite message sent to each contact address has the same "avp checks" performed for the username portion of the URI? Thanks,Steve

1 0

[OpenSER-Users] OpenSER in front of Asterisk
by lists＠infoway.net 09 Jan '08

09 Jan '08

Hi all, I'm relatively new to OpenSER (and SER for that matter). I have the following need and can't quite figure out how to do it. We have several Asterisk servers being used strictly for IVR purposes (IVR cluster). We also have several Asterisk servers used for standard telephone services and Agent/Queue services (telephone Cluster). We would like to setup one or two OpenSER machines in front of all that to serve the following purposes: 1) Route incoming calls appropriately to either the IVR cluster or the telephone cluster based on the DNIS 2) Be used as LCR servers so that the telephone cluster will send all outbound calls to and the OpenSER will determine if it needs to reach one of our termination carriers or simply just handle it internally (e.g. extension-to-extension calling) 3) When a caller in the IVR presses certain options, the caller may be transferred to an agent. So, we need to take the call away from the IVR cluster (possibly back to the OpenSER server) and redirect it to the telephone cluster so that an agent may handle the caller 4) CDR and billing purposes 5) Ideally, all our telephone users would register with OpenSER (instead of the Asterisk telephone cluster) and for "regular" calls, we could just handle everything within OpenSER, and only involve the telephone cluster if we need to redirect to voicemail or something like that We have read on the wiki about integrating SER with Asterisk for voicemail. We also have some snippets, mainly from the mailing list, about SER load balancing traffic to Asterisk. However, we really haven't found something that could address all items above. Could anyone provide some hits, snippets, or references to what we need in order to accomplish these goals? Thanks

1 0

← Newer
1
...
15
16
17
18
19
20
21
22
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users January 2008