sr-users May 2008

sr-users@lists.kamailio.org

121 participants
202 discussions

by Thorsten

Hi guys, I'm trying to get this constellation running Asterisk (priavte IP)---->SER (public IP)---->Asterisk (public IP) I've already Asterisk set up to put the external IP to the SIP messages with this parameter in sip.conf externip = 82.98.89.129 but I'm not sure what I have to configure on SER. Do I need the nathelper? My config of SER looks like this: # ----------- global configuration parameters ------------------------ debug=4 # debug level (cmd line: -dddddddddd) #debug=0 fork=no log_stderror=yes # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #listen=10.4.1.80 port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/ser/lib/ser/modules/sl.so" loadmodule "/usr/local/ser/lib/ser/modules/tm.so" loadmodule "/usr/local/ser/lib/ser/modules/rr.so" loadmodule "/usr/local/ser/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/ser/lib/ser/modules/usrloc.so" loadmodule "/usr/local/ser/lib/ser/modules/registrar.so" loadmodule "/usr/local/ser/lib/ser/modules/textops.so" loadmodule "/usr/local/ser/lib/ser/modules/avpops.so" loadmodule "/usr/local/ser/lib/ser/modules/xlog.so" loadmodule "/usr/local/ser/lib/ser/modules/auth.so" loadmodule "/usr/local/ser/lib/ser/modules/nathelper.so" loadmodule "/usr/local/ser/lib/ser/modules/uri.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) modparam("rr", "enable_full_lr", 1) modparam("registrar", "nat_flag", 6) modparam("nathelper", "natping_interval", 30) # Ping interval 30 s modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; if (!method=="REGISTER") record_route(); if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; if (uri==myself) { if (method=="ACK") { route(1); break; } if (method=="REGISTER") { record_route(); save("location"); break; }; if (method=="INVITE") { if (uri =~ "sip:0[0-9]@*") { route(3); break; } }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { if (!t_relay()) { sl_reply_error(); }; #log(1, "----------------------------Ringing--------------------\n"); #sl_send_reply("180", "Ringing"); } route[3] { if (uri =~ "sip:0[0-9]@*") { log(1, "Forwarding to MG03 \n"); rewritehostport("82.98.89.176:5060"); route(1); break; } } I appreciate any help Thanks Thorsten

16 years, 2 months

Re: [OpenSER-Users] [Openser] Problem with OpenSER anx openxcap integration

by piff62 piff62

Yes, I'm sure that my openser server works in the same time with openxcap. I don't understand. Thomas 2008/4/30 KARUMANCHI KARUNENDRA <karun6(a)yahoo.com>: > Hi *thomas,* > * Did you get openser working.* > *-Karun* > > ----- Original Message ---- > From: piff62 piff62 <piff62(a)gmail.com> > To: users(a)lists.openser.org > Sent: Wednesday, April 30, 2008 1:11:47 AM > Subject: [OpenSER-Users] [Openser] Problem with OpenSER anx openxcap > integration > > Hi everybody, > > I'm working about a IMS prototype architecture. > > So, I have install my server SIP : OpenSER and i have install a XDMS > (openxcap) for storage of privacy rules and presence. > > I have configured the 2 servers and they works but I already have one > error. > > This error occured when I change my privacy rules (in eyebeam). The > changes arrived to the openxcap and the openxcap want to prevent the openser > with a xmlrpc request. > > When openxcap call the xmlrpc function, i have this message error : > > *Error while notifying OpenSER management interface for 'user' > thomas@domain : <Fault -500: 'Command (refreshWatchers) processing > failed.\n'> > > *I understand that openxcap try call the openser refreshWatchers function > and failed but i don't know why ! > > someone would have already had this problem ? > > Thanks ! > > Thomas > > > ------------------------------ > Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it > now.<http://us.rd.yahoo.com/evt=51733/*http://mobile.yahoo.com/;_ylt=Ahu06i62sR8…> >

16 years, 2 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2008